#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_FPU is not set
# CONFIG_DEV_CONSOLE is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm32f4discovery"
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F407VG=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARDCTL=y
CONFIG_BOARDCTL_MKRD=y
CONFIG_BOARDCTL_USBDEVCTRL=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_BUILTIN=y
CONFIG_CDCACM=y
CONFIG_CDCACM_RXBUFSIZE=256
CONFIG_CDCACM_TXBUFSIZE=2048
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXAMPLES_NXSCOPE=y
CONFIG_EXAMPLES_NXSCOPE_CDCACM=y
CONFIG_EXAMPLES_NXSCOPE_SERIAL_PATH="/dev/ttyACM0"
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_INIT_ENTRYPOINT="nxscope_main"
CONFIG_INIT_STACKSIZE=4096
CONFIG_INTELHEX_BINARY=y
CONFIG_LOGGING_NXSCOPE=y
CONFIG_LOGGING_NXSCOPE_ACKFRAMES=y
CONFIG_LOGGING_NXSCOPE_DIVIDER=y
CONFIG_LOGGING_NXSCOPE_INTF_SERIAL=y
CONFIG_MM_REGIONS=2
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAMLOG=y
CONFIG_RAMLOG_BUFSIZE=4096
CONFIG_RAMLOG_SYSLOG=y
CONFIG_RAM_SIZE=114688
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=27
CONFIG_START_YEAR=2013
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_OTGFS=y
CONFIG_STM32_PWR=y
CONFIG_STM32_SPI1=y
CONFIG_STM32_USART2=y
CONFIG_SYSTEM_READLINE=y
CONFIG_USBDEV=y