/*********************************************************************** * cond.c * * Copyright (C) 2007 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name Gregory Nutt nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ***********************************************************************/ #include #include #include #include "ostest.h" #ifndef NULL # define NULL (void*)0 #endif static volatile enum { RUNNING, MUTEX_WAIT, COND_WAIT} waiter_state; static pthread_mutex_t mutex; static pthread_cond_t cond; static volatile int data_available = 0; static int waiter_nloops = 0; static int waiter_waits = 0; static int waiter_nerrors = 0; static int signaler_nloops = 0; static int signaler_already = 0; static int signaler_state = 0; static int signaler_nerrors = 0; static void *thread_waiter(void *parameter) { int status; printf("waiter_thread: Started\n"); for(;;) { /* Take the mutex */ waiter_state = MUTEX_WAIT; status = pthread_mutex_lock(&mutex); waiter_state = RUNNING; if (status != 0) { printf("waiter_thread: ERROR pthread_mutex_lock failed, status=%d\n", status); waiter_nerrors++; } /* Check if data is available -- if data is not available then * wait for it */ if (!data_available) { /* We are higher priority than the signaler thread so the * only time that the signaler thread will have a chance to run is when * we are waiting for the condition variable. In this case, pthread_cond_wait * will automatically release the mutex for the signaler (then re-acquire * the mutex before returning. */ waiter_state = COND_WAIT; status = pthread_cond_wait(&cond, &mutex); waiter_state = RUNNING; if (status != 0) { printf("waiter_thread: ERROR pthread_cond_wait failed, status=%d\n", status); waiter_nerrors++; } waiter_waits++; } /* Now data should be available */ if (!data_available) { printf("waiter_thread: ERROR data not available after wait\n"); waiter_nerrors++; } /* Clear data available */ data_available = 0; /* Release the mutex */ status = pthread_mutex_unlock(&mutex); if (status != 0) { printf("waiter_thread: ERROR waiter: pthread_mutex_unlock failed, status=%d\n", status); waiter_nerrors++; } waiter_nloops++; } } static void *thread_signaler(void *parameter) { int status; int i; printf("thread_signaler: Started\n"); for (i = 0; i < 32; i++) { /* Take the mutex. The waiter is higher priority and should * run until it waits for the condition. So, at this point * signaler should be waiting for the condition. */ status = pthread_mutex_lock(&mutex); if (status != 0) { printf("thread_signaler: ERROR pthread_mutex_lock failed, status=%d\n", status); signaler_nerrors++; } /* Verify the state */ if (waiter_state != COND_WAIT) { printf("thread_signaler: ERROR waiter state = %d != COND_WAITING\n", waiter_state); signaler_state++; } if (data_available) { printf("thread_signaler: ERROR data already available, waiter_state=%d\n", waiter_state); signaler_already++; } /* Set data available and signal the waiter */ data_available = 1; status = pthread_cond_signal(&cond); if (status != 0) { printf("thread_signaler: ERROR pthread_cond_signal failed, status=%d\n", status); signaler_nerrors++; } /* Release the mutex */ status = pthread_mutex_unlock(&mutex); if (status != 0) { printf("thread_signaler: ERROR pthread_mutex_unlock failed, status=%d\n", status); signaler_nerrors++; } signaler_nloops++; } printf("thread_signaler: Terminating\n"); pthread_exit(NULL); } void cond_test(void) { pthread_t waiter; pthread_t signaler; pthread_attr_t attr; #ifdef SDCC pthread_addr_t result; #endif struct sched_param sparam; int prio_min; int prio_max; int prio_mid; int status; /* Initialize the mutex */ printf("cond_test: Initializing mutex\n"); status = pthread_mutex_init(&mutex, NULL); if (status != 0) { printf("cond_test: ERROR pthread_mutex_init failed, status=%d\n", status); } /* Initialize the condition variable */ printf("cond_test: Initializing cond\n"); status = pthread_cond_init(&cond, NULL); if (status != 0) { printf("cond_test: ERROR pthread_condinit failed, status=%d\n", status); } /* Start the waiter thread at higher priority */ printf("cond_test: Starting waiter\n"); status = pthread_attr_init(&attr); if (status != 0) { printf("cond_test: pthread_attr_init failed, status=%d\n", status); } prio_min = sched_get_priority_min(SCHED_FIFO); prio_max = sched_get_priority_max(SCHED_FIFO); prio_mid = (prio_min + prio_max) / 2; sparam.sched_priority = prio_mid; status = pthread_attr_setschedparam(&attr,&sparam); if (status != OK) { printf("cond_test: pthread_attr_setschedparam failed, status=%d\n", status); } else { printf("cond_test: Set thread 1 priority to %d\n", sparam.sched_priority); } status = pthread_create(&waiter, &attr, thread_waiter, NULL); if (status != 0) { printf("cond_test: pthread_create failed, status=%d\n", status); } printf("cond_test: Starting signaler\n"); status = pthread_attr_init(&attr); if (status != 0) { printf("cond_test: pthread_attr_init failed, status=%d\n", status); } sparam.sched_priority = (prio_min + prio_mid) / 2; status = pthread_attr_setschedparam(&attr,&sparam); if (status != OK) { printf("cond_test: pthread_attr_setschedparam failed, status=%d\n", status); } else { printf("cond_test: Set thread 2 priority to %d\n", sparam.sched_priority); } status = pthread_create(&signaler, &attr, thread_signaler, NULL); if (status != 0) { printf("cond_test: pthread_create failed, status=%d\n", status); } /* Wait for the threads to stop */ #ifdef SDCC pthread_join(signaler, &result); #else pthread_join(signaler, NULL); #endif printf("cond_test: signaler terminated, now cancel the waiter\n"); pthread_detach(waiter); pthread_cancel(waiter); printf("cond_test: \tWaiter\tSignaler\n"); printf("cond_test: Loops\t%d\t%d\n", waiter_nloops, signaler_nloops); printf("cond_test: Errors\t%d\t%d\n", waiter_nerrors, signaler_nerrors); printf("cond_test: \n%d times, waiter did not have to wait for data\n", waiter_nloops - waiter_waits); printf("cond_test: %d times, data was already available when the signaler run\n", signaler_already); printf("cond_test: %d times, the waiter was in an unexpected state when the signaler ran\n", signaler_state); }