/**************************************************************************** * drivers/sensors/lis3dsh.c * Character driver for the LIS3DSH 3-Axis acclerometer. * * Copyright (C) 2016 DS-Automotion GmbH. All rights reserved. * Author: Alexander Entinger * Thomas Ilk * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #if defined(CONFIG_SPI) && defined(CONFIG_LIS3DSH) /**************************************************************************** * Private ****************************************************************************/ struct lis3dsh_sensor_data_s { int16_t x_acc; /* Measurement result for x axis */ int16_t y_acc; /* Measurement result for y axis */ int16_t z_acc; /* Measurement result for z axis */ }; struct lis3dsh_dev_s { FAR struct lis3dsh_dev_s *flink; /* Supports a singly linked list of * drivers */ FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */ FAR struct lis3dsh_config_s *config; /* Pointer to the configuration * of the LIS3DSH sensor */ sem_t datasem; /* Manages exclusive access to this * structure */ struct lis3dsh_sensor_data_s data; /* The data as measured by the sensor */ struct work_s work; /* The work queue is responsible for * retrieving the data from the * sensor after the arrival of new * data was signalled in an interrupt */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev, uint8_t const reg_addr, uint8_t *reg_data); static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_data); static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev); static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev); static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev, uint16_t *x_acc, uint16_t *y_acc, uint16_t *z_acc); static int lis3dsh_interrupt_handler(int irq, FAR void *context); static void lis3dsh_worker(FAR void *arg); static int lis3dsh_open(FAR struct file *filep); static int lis3dsh_close(FAR struct file *filep); static ssize_t lis3dsh_read(FAR struct file *, FAR char *buffer, size_t buflen); static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int lis3dsh_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_lis3dsh_fops = { lis3dsh_open, lis3dsh_close, lis3dsh_read, lis3dsh_write, NULL, lis3dsh_ioctl #ifndef CONFIG_DISABLE_POLL , NULL #endif #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL #endif }; /* Single linked list to store instances of drivers */ static struct lis3dsh_dev_s *g_lis3dsh_list = NULL; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lis3dsh_read_register ****************************************************************************/ static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev, uint8_t const reg_addr, uint8_t * reg_data) { /* Lock the SPI bus so that only one device can access it at the same time */ SPI_LOCK(dev->spi, true); /* Set CS to low which selects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address from where we want to read - the MSB needs * to be set to indicate the read indication. */ SPI_SEND(dev->spi, reg_addr | 0x80); /* Write an idle byte while receiving the required data */ *reg_data = (uint8_t) (SPI_SEND(dev->spi, 0)); /* Set CS to high which deselects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: lis3dsh_write_register ****************************************************************************/ static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_data) { /* Lock the SPI bus so that only one device can access it at the same time */ SPI_LOCK(dev->spi, true); /* Set CS to low which selects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address from where we want to read */ SPI_SEND(dev->spi, reg_addr); /* Transmit the content which should be written in the register */ SPI_SEND(dev->spi, reg_data); /* Set CS to high which deselects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: lis3dsh_reset ****************************************************************************/ static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev) { lis3dsh_write_register(dev, LIS3DSH_CTRL_REG_6, LIS3DSH_CTRL_REG_6_BOOT_bm); up_mdelay(100); } /**************************************************************************** * Name: lis3dsh_read_measurement_data ****************************************************************************/ static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev) { uint16_t x_acc = 0; uint16_t y_acc = 0; uint16_t z_acc = 0; int ret; /* Read acclerometer data */ lis3dsh_read_acclerometer_data(dev, &x_acc, &y_acc, &z_acc); /* Aquire the semaphore before the data is copied */ ret = sem_wait(&dev->datasem); if (ret < 0) { snerr("ERROR: Could not aquire dev->datasem: %d\n", ret); return; } /* Copy retrieve data to internal data structure */ dev->data.x_acc = (int16_t)x_acc; dev->data.y_acc = (int16_t)y_acc; dev->data.z_acc = (int16_t)z_acc; /* Give back the semaphore */ sem_post(&dev->datasem); } /**************************************************************************** * Name: lis3dsh_read_acclerometer_data ****************************************************************************/ static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev, uint16_t * x_acc, uint16_t * y_acc, uint16_t * z_acc) { /* Lock the SPI bus so that only one device can access it at the same time */ SPI_LOCK(dev->spi, true); /* Set CS to low which selects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address from where we want to start reading 0x80 -> * MSB is set -> Read Indication. */ SPI_SEND(dev->spi, (LIS3DSH_OUT_X_L_REG | 0x80)); /* RX */ *x_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */ *x_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */ *y_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */ *y_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */ *z_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */ *z_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */ /* Set CS to high which deselects the LIS3DSH */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: lis3dsh_interrupt_handler ****************************************************************************/ static int lis3dsh_interrupt_handler(int irq, FAR void *context) { /* This function should be called upon a rising edge on the LIS3DSH new data * interrupt pin since it signals that new data has been measured. */ FAR struct lis3dsh_dev_s *priv = NULL; int ret; /* Find out which device caused the interrupt */ for (priv = g_lis3dsh_list; priv && priv->config->irq != irq; priv = priv->flink); DEBUGASSERT(priv != NULL); /* Task the worker with retrieving the latest sensor data. We should not do * this in a interrupt since it might take too long. Also we cannot lock the * SPI bus from within an interrupt. */ DEBUGASSERT(priv->work.worker == NULL); ret = work_queue(HPWORK, &priv->work, lis3dsh_worker, priv, 0); if (ret < 0) { snerr("ERROR: Failed to queue work: %d\n", ret); return ret; } return OK; } /**************************************************************************** * Name: lis3dsh_worker ****************************************************************************/ static void lis3dsh_worker(FAR void *arg) { FAR struct lis3dsh_dev_s *priv = (FAR struct lis3dsh_dev_s *)(arg); DEBUGASSERT(priv != NULL); /* Read out the latest sensor data */ lis3dsh_read_measurement_data(priv); } /**************************************************************************** * Name: lis3dsh_open ****************************************************************************/ static int lis3dsh_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dsh_dev_s *priv = inode->i_private; DEBUGASSERT(priv != NULL); /* Perform a reset */ lis3dsh_reset(priv); /* Enable - the full scale range (FS = +/- 16 g) */ lis3dsh_write_register(priv, LIS3DSH_CTRL_REG_5, LIS3DSH_CTRL_REG_5_FSCALE_2_bm); /* Enable - Auto increment of address when reading multiple bytes */ lis3dsh_write_register(priv, LIS3DSH_CTRL_REG_6, LIS3DSH_CTRL_REG_6_ADD_INC_bm); /* Enable - Measurement of X-, Y-, and Z-axis - Block data update for * accelerating data This should prevent race conditions when reading sensor * data - fastest output data rate (ODR = 1600 Hz) */ lis3dsh_write_register(priv, LIS3DSH_CTRL_REG_4, LIS3DSH_CTRL_REG_4_XEN_bm | LIS3DSH_CTRL_REG_4_YEN_bm | LIS3DSH_CTRL_REG_4_ZEN_bm | LIS3DSH_CTRL_REG_4_BDU_bm | LIS3DSH_CTRL_REG_4_ODR_3_bm | LIS3DSH_CTRL_REG_4_ODR_0_bm); /* Enable - DRDY signal enable to INT 1 */ lis3dsh_write_register(priv, LIS3DSH_CTRL_REG_3, LIS3DSH_CTRL_REG_3_DR_EN_bm | LIS3DSH_CTRL_REG_3_IEA_bm | LIS3DSH_CTRL_REG_3_IEL_bm | LIS3DSH_CTRL_REG_3_INT1_EN_bm); /* Read back the content of all control registers for debug purposes */ #ifdef CONFIG_DEBUG_SENSORS_INFO { uint8_t reg_content = 0; lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_1, ®_content); sninfo("LIS3DSH_CTRL_REG_1 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_2, ®_content); sninfo("LIS3DSH_CTRL_REG_2 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_3, ®_content); sninfo("LIS3DSH_CTRL_REG_3 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_4, ®_content); sninfo("LIS3DSH_CTRL_REG_4 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_5, ®_content); sninfo("LIS3DSH_CTRL_REG_5 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_6, ®_content); sninfo("LIS3DSH_CTRL_REG_6 = %04x\n", reg_content); lis3dsh_read_register(priv, LIS3DSH_STATUS_REG, ®_content); sninfo("STATUS_REG = %04x\n", reg_content); } #endif return OK; } /**************************************************************************** * Name: lis3dsh_close ****************************************************************************/ static int lis3dsh_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dsh_dev_s *priv = inode->i_private; DEBUGASSERT(priv != NULL); /* Perform a reset */ lis3dsh_reset(priv); return OK; } /**************************************************************************** * Name: lis3dsh_read ****************************************************************************/ static ssize_t lis3dsh_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dsh_dev_s *priv = inode->i_private; FAR struct lis3dsh_sensor_data_s *data; int ret; DEBUGASSERT(priv != NULL); /* Check if enough memory was provided for the read call */ if (buflen < sizeof(FAR struct lis3dsh_sensor_data_s)) { snerr("ERROR: Not enough memory for reading out a sensor data sample\n"); return -ENOSYS; } /* Aquire the semaphore before the data is copied */ ret = sem_wait(&priv->datasem); if (ret < 0) { int errcode = errno; snerr("ERROR: Could not aquire priv->datasem: %d\n", errcode); return -errcode; } /* Copy the sensor data into the buffer */ data = (FAR struct lis3dsh_sensor_data_s *)buffer; memset(data, 0, sizeof(FAR struct lis3dsh_sensor_data_s)); data->x_acc = priv->data.x_acc; data->y_acc = priv->data.y_acc; data->z_acc = priv->data.z_acc; /* Give back the semaphore */ sem_post(&priv->datasem); return sizeof(FAR struct lis3dsh_sensor_data_s); } /**************************************************************************** * Name: lis3dsh_write ****************************************************************************/ static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: lis3dsh_ioctl ****************************************************************************/ static int lis3dsh_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { int ret = OK; switch (cmd) { /* Command was not recognized */ default: snerr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: lis3dsh_register * * Description: * Register the LIS3DSH character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/acc0" * spi - An instance of the SPI interface to use to communicate with * LIS3DSH * config - configuration for the LIS3DSH driver. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int lis3dsh_register(FAR const char *devpath, FAR struct spi_dev_s *spi, FAR struct lis3dsh_config_s *config) { FAR struct lis3dsh_dev_s *priv; int ret; /* Sanity check */ DEBUGASSERT(spi != NULL); DEBUGASSERT(config != NULL); /* Initialize the LIS3DSH device structure */ priv = (FAR struct lis3dsh_dev_s *)kmm_malloc(sizeof(struct lis3dsh_dev_s)); if (priv == NULL) { snerr("ERROR: Failed to allocate instance\n"); return -ENOMEM; } priv->spi = spi; priv->config = config; priv->work.worker = NULL; sem_init(&priv->datasem, 0, 1); /* Initialize sensor data access * semaphore */ /* Setup SPI frequency and mode */ SPI_SETFREQUENCY(spi, LIS3DSH_SPI_FREQUENCY); SPI_SETMODE(spi, LIS3DSH_SPI_MODE); /* Register the character driver */ ret = register_driver(devpath, &g_lis3dsh_fops, 0666, priv); if (ret < 0) { snerr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); sem_destroy(&priv->datasem); return ret; } /* Since we support multiple LIS3DSH devices, we will need to add this new * instance to a list of device instances so that it can be found by the * interrupt handler based on the received IRQ number. */ priv->flink = g_lis3dsh_list; g_lis3dsh_list = priv; /* Attach the interrupt handler */ ret = priv->config->attach(priv->config, &lis3dsh_interrupt_handler); if (ret < 0) { snerr("ERROR: Failed to attach interrupt: %d\n", ret); return ret; } return OK; } #endif /* CONFIG_SPI && CONFIG_LIS3DSH */