/**************************************************************************** * drivers/mtd/at45db.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* Driver for SPI-based AT45DB161D (16Mbit) */ /* Ordering Code Detail: * * AT 45DB 16 1 D SS U * | | | | | | `- Device grade * | | | | | `- Package Option * | | | | `- Device revision * | | | `- Interface: 1=serial * | | `- Capacity: 16=16Mbit * | `- Product family * `- Atmel designator */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* CONFIG_AT45DB_PREWAIT enables higher performance write logic: * We leave the chip busy after write and erase operations. * This improves write and erase performance because we do not have to wait * as long between transactions (other processing can occur while the chip * is busy) but means that the chip must stay powered. */ #if defined(CONFIG_AT45DB_PWRSAVE) && defined(CONFIG_AT45DB_PREWAIT) # error "Both CONFIG_AT45DB_PWRSAVE and CONFIG_AT45DB_PREWAIT are defined" #endif /* If the user has provided no frequency, use 1MHz */ #ifndef CONFIG_AT45DB_FREQUENCY # define CONFIG_AT45DB_FREQUENCY 1000000 #endif /* SPI Commands *************************************************************/ /* Read commands */ #define AT45DB_RDMN 0xd2 /* Main Memory Page Read */ #define AT45DB_RDARRY 0xe8 /* Continuous Array Read (Legacy Command) */ #define AT45DB_RDARRAYLF 0x03 /* Continuous Array Read (Low Frequency) */ #define AT45DB_RDARRAYHF 0x0b /* Continuous Array Read (High Frequency) */ #define AT45DB_RDBF1LF 0xd1 /* Buffer 1 Read (Low Frequency) */ #define AT45DB_RDBF2LF 0xd3 /* Buffer 2 Read (Low Frequency) */ #define AT45DB_RDBF1 0xd4 /* Buffer 1 Read */ #define AT45DB_RDBF2 0xd6 /* Buffer 2 Read */ /* Program and Erase Commands */ #define AT45DB_WRBF1 0x84 /* Buffer 1 Write */ #define AT45DB_WRBF2 0x87 /* Buffer 2 Write */ #define AT45DB_BF1TOMNE 0x83 /* Buffer 1 to Main Memory Page Program with Built-in Erase */ #define AT45DB_BF2TOMNE 0x86 /* Buffer 2 to Main Memory Page Program with Built-in Erase */ #define AT45DB_BF1TOMN 0x88 /* Buffer 1 to Main Memory Page Program without Built-in Erase */ #define AT45DB_BF2TOMN 0x89 /* Buffer 2 to Main Memory Page Program without Built-in Erase */ #define AT45DB_PGERASE 0x81 /* Page Erase */ #define AT45DB_BLKERASE 0x50 /* Block Erase */ #define AT45DB_SECTERASE 0x7c /* Sector Erase */ #define AT45DB_CHIPERASE1 0xc7 /* Chip Erase - byte 1 */ # define AT45DB_CHIPERASE2 0x94 /* Chip Erase - byte 2 */ # define AT45DB_CHIPERASE3 0x80 /* Chip Erase - byte 3 */ # define AT45DB_CHIPERASE4 0x9a /* Chip Erase - byte 4 */ #define AT45DB_MNTHRUBF1 0x82 /* Main Memory Page Program Through Buffer 1 */ #define AT45DB_MNTHRUBF2 0x85 /* Main Memory Page Program Through Buffer 2 */ /* Protection and Security Commands */ #define AT45DB_ENABPROT1 0x3d /* Enable Sector Protection - byte 1 */ # define AT45DB_ENABPROT2 0x2a /* Enable Sector Protection - byte 2 */ # define AT45DB_ENABPROT3 0x7f /* Enable Sector Protection - byte 3 */ # define AT45DB_ENABPROT4 0xa9 /* Enable Sector Protection - byte 4 */ #define AT45DB_DISABPROT1 0x3d /* Disable Sector Protection - byte 1 */ # define AT45DB_DISABPROT2 0x2a /* Disable Sector Protection - byte 2 */ # define AT45DB_DISABPROT3 0x7f /* Disable Sector Protection - byte 3 */ # define AT45DB_DISABPROT4 0x9a /* Disable Sector Protection - byte 4 */ #define AT45DB_ERASEPROT1 0x3d /* Erase Sector Protection Register - byte 1 */ # define AT45DB_ERASEPROT2 0x2a /* Erase Sector Protection Register - byte 2 */ # define AT45DB_ERASEPROT3 0x7f /* Erase Sector Protection Register - byte 3 */ # define AT45DB_ERASEPROT4 0xcf /* Erase Sector Protection Register - byte 4 */ #define AT45DB_PROGPROT1 0x3d /* Program Sector Protection Register - byte 1 */ # define AT45DB_PROGPROT2 0x2a /* Program Sector Protection Register - byte 2 */ # define AT45DB_PROGPROT3 0x7f /* Program Sector Protection Register - byte 3 */ # define AT45DB_PROGPROT4 0xfc /* Program Sector Protection Register - byte 4 */ #define AT45DB_RDPROT 0x32 /* Read Sector Protection Register */ #define AT45DB_LOCKDOWN1 0x3d /* Sector Lockdown - byte 1 */ # define AT45DB_LOCKDOWN2 0x2a /* Sector Lockdown - byte 2 */ # define AT45DB_LOCKDOWN3 0x7f /* Sector Lockdown - byte 3 */ # define AT45DB_LOCKDOWN4 0x30 /* Sector Lockdown - byte 4 */ #define AT45DB_RDLOCKDOWN 0x35 /* Read Sector Lockdown Register */ #define AT45DB_PROGSEC1 0x9b /* Program Security Register - byte 1 */ # define AT45DB_PROGSEC2 0x00 /* Program Security Register - byte 2 */ # define AT45DB_PROGSEC3 0x00 /* Program Security Register - byte 3 */ # define AT45DB_PROGSEC4 0x00 /* Program Security Register - byte 4 */ #define AT45DB_RDSEC 0x77 /* Read Security Register */ /* Additional commands */ #define AT45DB_MNTOBF1XFR 0x53 /* Main Memory Page to Buffer 1 Transfer */ #define AT45DB_MNTOBF2XFR 0x55 /* Main Memory Page to Buffer 2 Transfer */ #define AT45DB_MNBF1CMP 0x60 /* Main Memory Page to Buffer 1 Compare */ #define AT45DB_MNBF2CMP 0x61 /* Main Memory Page to Buffer 2 Compare */ #define AT45DB_AUTOWRBF1 0x58 /* Auto Page Rewrite through Buffer 1 */ #define AT45DB_AUTOWRBF2 0x59 /* Auto Page Rewrite through Buffer 2 */ #define AT45DB_PWRDOWN 0xb9 /* Deep Power-down */ #define AT45DB_RESUME 0xab /* Resume from Deep Power-down */ #define AT45DB_RDSR 0xd7 /* Status Register Read */ #define AT45DB_RDDEVID 0x9f /* Manufacturer and Device ID Read */ #define AT45DB_MANUFACTURER 0x1f /* Manufacturer ID: Atmel */ #define AT45DB_DEVID1_CAPMSK 0x1f /* Bits 0-4: Capacity */ #define AT45DB_DEVID1_1MBIT 0x02 /* xxx0 0010 = 1Mbit AT45DB011 */ #define AT45DB_DEVID1_2MBIT 0x03 /* xxx0 0012 = 2Mbit AT45DB021 */ #define AT45DB_DEVID1_4MBIT 0x04 /* xxx0 0100 = 4Mbit AT45DB041 */ #define AT45DB_DEVID1_8MBIT 0x05 /* xxx0 0101 = 8Mbit AT45DB081 */ #define AT45DB_DEVID1_16MBIT 0x06 /* xxx0 0110 = 16Mbit AT45DB161 */ #define AT45DB_DEVID1_32MBIT 0x07 /* xxx0 0111 = 32Mbit AT45DB321 */ #define AT45DB_DEVID1_64MBIT 0x08 /* xxx0 1000 = 32Mbit AT45DB641 */ #define AT45DB_DEVID1_FAMMSK 0xe0 /* Bits 5-7: Family */ #define AT45DB_DEVID1_DFLASH 0x20 /* 001x xxxx = Dataflash */ #define AT45DB_DEVID1_AT26DF 0x40 /* 010x xxxx = AT26DFxxx series (Not supported) */ #define AT45DB_DEVID2_VERMSK 0x1f /* Bits 0-4: MLC mask */ #define AT45DB_DEVID2_MLCMSK 0xe0 /* Bits 5-7: MLC mask */ /* Status register bit definitions */ #define AT45DB_SR_RDY (1 << 7) /* Bit 7: RDY/ Not BUSY */ #define AT45DB_SR_COMP (1 << 6) /* Bit 6: COMP */ #define AT45DB_SR_PROTECT (1 << 1) /* Bit 1: PROTECT */ #define AT45DB_SR_PGSIZE (1 << 0) /* Bit 0: PAGE_SIZE */ /* 1 Block = 16 pages; 1 sector = 256 pages */ #define PG_PER_BLOCK (16) #define PG_PER_SECTOR (256) /**************************************************************************** * Private Types ****************************************************************************/ /* This type represents the state of the MTD device. The struct mtd_dev_s * must appear at the beginning of the definition so that you can freely * cast between pointers to struct mtd_dev_s and struct at45db_dev_s. */ struct at45db_dev_s { struct mtd_dev_s mtd; /* MTD interface */ FAR struct spi_dev_s *spi; /* Saved SPI interface instance */ uint8_t pageshift; /* log2 of the page size (eg. 1 << 9 = 512) */ uint32_t npages; /* Number of pages in the device */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Lock and per-transaction configuration */ static void at45db_lock(FAR struct at45db_dev_s *priv); static inline void at45db_unlock(FAR struct at45db_dev_s *priv); /* Power management */ #ifdef CONFIG_AT45DB_PWRSAVE static void at45db_pwrdown(FAR struct at45db_dev_s *priv); static void at45db_resume(FAR struct at45db_dev_s *priv); #else # define at45db_pwrdown(priv) # define at45db_resume(priv) #endif /* Low-level AT45DB Helpers */ static inline int at45db_rdid(FAR struct at45db_dev_s *priv); static inline uint8_t at45db_rdsr(FAR struct at45db_dev_s *priv); static uint8_t at45db_waitbusy(FAR struct at45db_dev_s *priv); static inline void at45db_pgerase(FAR struct at45db_dev_s *priv, off_t offset); static inline int at45db_chiperase(FAR struct at45db_dev_s *priv); static inline void at45db_pgwrite(FAR struct at45db_dev_s *priv, FAR const uint8_t *buffer, off_t offset); /* MTD driver methods */ static int at45db_erase(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks); static ssize_t at45db_bread(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks, FAR uint8_t *buf); static ssize_t at45db_bwrite(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks, FAR const uint8_t *buf); static ssize_t at45db_read(FAR struct mtd_dev_s *mtd, off_t offset, size_t nbytes, FAR uint8_t *buffer); static int at45db_ioctl(FAR struct mtd_dev_s *mtd, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ /* Chip erase sequence */ #define CHIP_ERASE_SIZE 4 static const uint8_t g_chiperase[CHIP_ERASE_SIZE] = { 0xc7, 0x94, 0x80, 0x9a }; /* Sequence to program the device to binary page sizes{256, 512, 1024} */ #define BINPGSIZE_SIZE 4 static const uint8_t g_binpgsize[BINPGSIZE_SIZE] = { 0x3d, 0x2a, 0x80, 0xa6 }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: at45db_lock ****************************************************************************/ static void at45db_lock(FAR struct at45db_dev_s *priv) { /* On SPI buses where there are multiple devices, it will be necessary to * lock SPI to have exclusive access to the buses for a sequence of * transfers. The bus should be locked before the chip is selected. * * This is a blocking call and will not return until we have exclusive * access to the SPI bus. We will retain that exclusive access until the * bus is unlocked. */ SPI_LOCK(priv->spi, true); /* After locking the SPI bus, the we also need call the setfrequency, * setbits, and setmode methods to make sure that the SPI is properly * configured for the device. * If the SPI bus is being shared, then it may have been left in an * incompatible state. */ SPI_SETMODE(priv->spi, SPIDEV_MODE0); SPI_SETBITS(priv->spi, 8); SPI_HWFEATURES(priv->spi, 0); SPI_SETFREQUENCY(priv->spi, CONFIG_AT45DB_FREQUENCY); } /**************************************************************************** * Name: at45db_unlock ****************************************************************************/ static inline void at45db_unlock(FAR struct at45db_dev_s *priv) { SPI_LOCK(priv->spi, false); } /**************************************************************************** * Name: at45db_pwrdown ****************************************************************************/ #ifdef CONFIG_AT45DB_PWRSAVE static void at45db_pwrdown(FAR struct at45db_dev_s *priv) { SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SEND(priv->spi, AT45DB_PWRDOWN); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); } #endif /**************************************************************************** * Name: at45db_resume ****************************************************************************/ #ifdef CONFIG_AT45DB_PWRSAVE static void at45db_resume(FAR struct at45db_dev_s *priv) { SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SEND(priv->spi, AT45DB_RESUME); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); up_udelay(50); } #endif /**************************************************************************** * Name: at45db_rdid ****************************************************************************/ static inline int at45db_rdid(FAR struct at45db_dev_s *priv) { uint8_t capacity; uint8_t devid[3]; finfo("priv: %p\n", priv); /* Configure the bus, and select this FLASH part. (The caller should * already have locked the bus for exclusive access) */ SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); /* Send the "Manufacturer and Device ID Read" command and read the * next three ID bytes from the FLASH. */ SPI_SEND(priv->spi, AT45DB_RDDEVID); SPI_RECVBLOCK(priv->spi, devid, 3); /* Deselect the FLASH */ SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); finfo("manufacturer: %02x devid1: %02x devid2: %02x\n", devid[0], devid[1], devid[2]); /* Check for a valid manufacturer and memory family */ if (devid[0] == AT45DB_MANUFACTURER && (devid[1] & AT45DB_DEVID1_FAMMSK) == AT45DB_DEVID1_DFLASH) { /* Okay.. is it a FLASH capacity that we understand? */ capacity = devid[1] & AT45DB_DEVID1_CAPMSK; switch (capacity) { case AT45DB_DEVID1_1MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB011 */ priv->pageshift = 8; /* Page size = 256 bytes */ priv->npages = 512; /* 512 pages */ return OK; case AT45DB_DEVID1_2MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB021 */ priv->pageshift = 8; /* Page size = 256/264 bytes */ priv->npages = 1024; /* 1024 pages */ return OK; case AT45DB_DEVID1_4MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB041 */ priv->pageshift = 8; /* Page size = 256/264 bytes */ priv->npages = 2048; /* 2048 pages */ return OK; case AT45DB_DEVID1_8MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB081 */ priv->pageshift = 8; /* Page size = 256/264 bytes */ priv->npages = 4096; /* 4096 pages */ return OK; case AT45DB_DEVID1_16MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB161 */ priv->pageshift = 9; /* Page size = 512/528 bytes */ priv->npages = 4096; /* 4096 pages */ return OK; case AT45DB_DEVID1_32MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB321 */ priv->pageshift = 9; /* Page size = 512/528 bytes */ priv->npages = 8192; /* 8192 pages */ return OK; case AT45DB_DEVID1_64MBIT: /* Save the FLASH geometry for the 16Mbit AT45DB321 */ priv->pageshift = 10; /* Page size = 1024/1056 bytes */ priv->npages = 8192; /* 8192 pages */ return OK; default: return -ENODEV; } } return -ENODEV; } /**************************************************************************** * Name: at45db_rdsr ****************************************************************************/ static inline uint8_t at45db_rdsr(FAR struct at45db_dev_s *priv) { uint8_t retval; SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SEND(priv->spi, AT45DB_RDSR); retval = SPI_SEND(priv->spi, 0xff); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); return retval; } /**************************************************************************** * Name: at45db_waitbusy ****************************************************************************/ static uint8_t at45db_waitbusy(FAR struct at45db_dev_s *priv) { uint8_t sr; /* Poll the device, waiting for it to report that it is ready */ do { up_udelay(10); sr = (uint8_t)at45db_rdsr(priv); } while ((sr & AT45DB_SR_RDY) == 0); return sr; } /**************************************************************************** * Name: at45db_pgerase ****************************************************************************/ static inline void at45db_pgerase(FAR struct at45db_dev_s *priv, off_t sector) { uint8_t erasecmd[4]; off_t offset = sector << priv->pageshift; finfo("sector: %08lx\n", (long)sector); /* Higher performance write logic: We leave the chip busy after write and * erase operations. This improves write and erase performance because we * do not have to wait as long between transactions (other processing can * occur while the chip is busy) but means that the chip must stay powered * and that we must check if the chip is still busy on each entry point. */ #ifdef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif /* "The Page Erase command can be used to individually erase any page in * the main memory array allowing the Buffer to Main Memory Page Program * to be utilized at a later time. ... To perform a page erase in the * binary page size ..., the opcode 81H must be loaded into the device, * followed by three address bytes ... When a low-to-high transition * occurs on the CS pin, the part will erase the selected page (the * erased state is a logical 1). ... the status register and the * RDY/BUSY pin will indicate that the part is busy." */ erasecmd[0] = AT45DB_PGERASE; /* Page erase command */ erasecmd[1] = (offset >> 16) & 0xff; /* 24-bit offset MS bytes */ erasecmd[2] = (offset >> 8) & 0xff; /* 24-bit offset middle bytes */ erasecmd[3] = offset & 0xff; /* 24-bit offset LS bytes */ /* Erase the page */ SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SNDBLOCK(priv->spi, erasecmd, 4); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); /* Wait for any erase to complete if we are not trying to improve write * performance. (see comments above). */ #ifndef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif finfo("Erased\n"); } /**************************************************************************** * Name: at45db_chiperase ****************************************************************************/ static inline int at45db_chiperase(FAR struct at45db_dev_s *priv) { finfo("priv: %p\n", priv); /* Higher performance write logic: We leave the chip busy after write and * erase operations. This improves write and erase performance because we * do not have to wait as long between transactions (other processing can * occur while the chip is busy) but means that the chip must stay powered * and that we must check if the chip is still busy on each entry point. */ #ifdef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif /* "The entire main memory can be erased at one time by using the Chip * Erase command. To execute the Chip Erase command, a 4-byte command * sequence C7H, 94H, 80H and 9AH must be clocked into the device. ... * After the last bit of the opcode sequence has been clocked in, the CS * pin can be deasserted to start theerase process. ... the Status * Register will indicate that the device is busy. * The Chip Erase command will not affect sectors that are protected or * locked down... */ SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SNDBLOCK(priv->spi, g_chiperase, CHIP_ERASE_SIZE); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); /* Wait for any erase to complete if we are not trying to improve write * performance. (see comments above). */ #ifndef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif return OK; } /**************************************************************************** * Name: at45db_pgwrite ****************************************************************************/ static inline void at45db_pgwrite(FAR struct at45db_dev_s *priv, FAR const uint8_t *buffer, off_t page) { uint8_t wrcmd [4]; off_t offset = page << priv->pageshift; finfo("page: %08lx offset: %08lx\n", (long)page, (long)offset); /* We assume that sectors are not write protected */ wrcmd[0] = AT45DB_MNTHRUBF1; /* To main memory through buffer 1 */ wrcmd[1] = (offset >> 16) & 0xff; /* 24-bit address MS byte */ wrcmd[2] = (offset >> 8) & 0xff; /* 24-bit address middle byte */ wrcmd[3] = offset & 0xff; /* 24-bit address LS byte */ /* Higher performance write logic: We leave the chip busy after write and * erase operations. This improves write and erase performance because we * do not have to wait as long between transactions (other processing can * occur while the chip is busy) but means that the chip must stay powered * and that we must check if the chip is still busy on each entry point. */ #ifdef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SNDBLOCK(priv->spi, wrcmd, 4); SPI_SNDBLOCK(priv->spi, buffer, 1 << priv->pageshift); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); /* Wait for any erase to complete if we are not trying to improve write * performance. (see comments above). */ #ifndef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif finfo("Written\n"); } /**************************************************************************** * Name: at45db_erase ****************************************************************************/ static int at45db_erase(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks) { FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd; size_t pgsleft = nblocks; finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); /* Take the lock so that we have exclusive access to the bus, then power * up the FLASH device. */ at45db_lock(priv); at45db_resume(priv); /* Then erase each page */ while (pgsleft-- > 0) { /* Erase each sector */ at45db_pgerase(priv, startblock); startblock++; } at45db_pwrdown(priv); at45db_unlock(priv); return (int)nblocks; } /**************************************************************************** * Name: at45db_bread ****************************************************************************/ static ssize_t at45db_bread(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks, FAR uint8_t *buffer) { FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd; ssize_t nbytes; /* On this device, we can handle the block read just like the byte-oriented * read */ nbytes = at45db_read(mtd, startblock << priv->pageshift, nblocks << priv->pageshift, buffer); if (nbytes > 0) { return nbytes >> priv->pageshift; } return nbytes; } /**************************************************************************** * Name: at45db_bwrite ****************************************************************************/ static ssize_t at45db_bwrite(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks, FAR const uint8_t *buffer) { FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd; size_t pgsleft = nblocks; finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); /* Take the lock so that we have exclusive access to the bus, then power * up the FLASH device. */ at45db_lock(priv); at45db_resume(priv); /* Write each page to FLASH */ while (pgsleft-- > 0) { at45db_pgwrite(priv, buffer, startblock); startblock++; buffer += (1 << priv->pageshift); } at45db_pwrdown(priv); at45db_unlock(priv); return nblocks; } /**************************************************************************** * Name: at45db_read ****************************************************************************/ static ssize_t at45db_read(FAR struct mtd_dev_s *mtd, off_t offset, size_t nbytes, FAR uint8_t *buffer) { FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd; uint8_t rdcmd [5]; finfo("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes); /* Set up for the read */ rdcmd[0] = AT45DB_RDARRAYHF; /* FAST_READ is safe at all supported SPI speeds. */ rdcmd[1] = (offset >> 16) & 0xff; /* 24-bit address upper byte */ rdcmd[2] = (offset >> 8) & 0xff; /* 24-bit address middle byte */ rdcmd[3] = offset & 0xff; /* 24-bit address least significant byte */ rdcmd[4] = 0; /* Dummy byte */ /* Take the lock so that we have exclusive access to the bus, then power up * the FLASH device. */ at45db_lock(priv); at45db_resume(priv); /* Higher performance write logic: We leave the chip busy after write and * erase operations. This improves write and erase performance because we * do not have to wait as long between transactions (other processing can * occur while the chip is busy) but means that the chip must stay powered * and that we must check if the chip is still busy on each entry point. */ #ifdef CONFIG_AT45DB_PREWAIT at45db_waitbusy(priv); #endif /* Perform the read */ SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SNDBLOCK(priv->spi, rdcmd, 5); SPI_RECVBLOCK(priv->spi, buffer, nbytes); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); at45db_pwrdown(priv); at45db_unlock(priv); finfo("return nbytes: %d\n", (int)nbytes); return nbytes; } /**************************************************************************** * Name: at45db_ioctl ****************************************************************************/ static int at45db_ioctl(FAR struct mtd_dev_s *mtd, int cmd, unsigned long arg) { FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd; int ret = -EINVAL; /* Assume good command with bad parameters */ finfo("cmd: %d\n", cmd); switch (cmd) { case MTDIOC_GEOMETRY: { FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); if (geo) { /* Populate the geometry structure with information need to * know the capacity and how to access the device. * * NOTE: * that the device is treated as though it where just an array * of fixed size blocks. * That is most likely not true, but the clientwill expect the * device logic to do whatever is necessary to make it appear * so. */ geo->blocksize = (1 << priv->pageshift); geo->erasesize = geo->blocksize; geo->neraseblocks = priv->npages; ret = OK; finfo("blocksize: %d erasesize: %d neraseblocks: %d\n", geo->blocksize, geo->erasesize, geo->neraseblocks); } } break; case BIOC_PARTINFO: { FAR struct partition_info_s *info = (FAR struct partition_info_s *)arg; if (info != NULL) { info->numsectors = priv->npages; info->sectorsize = 1 << priv->pageshift; info->startsector = 0; info->parent[0] = '\0'; ret = OK; } } break; case MTDIOC_BULKERASE: { /* Take the lock so that we have exclusive access to the bus, then * power up the FLASH device. */ at45db_lock(priv); at45db_resume(priv); /* Erase the entire device */ ret = at45db_chiperase(priv); at45db_pwrdown(priv); at45db_unlock(priv); } break; default: ret = -ENOTTY; /* Bad command */ break; } finfo("return %d\n", ret); return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: at45db_initialize * * Description: * Create an initialize MTD device instance. MTD devices are not registered * in the file system, but are created as instances that can be bound to * other functions (such as a block or character driver front end). * ****************************************************************************/ FAR struct mtd_dev_s *at45db_initialize(FAR struct spi_dev_s *spi) { FAR struct at45db_dev_s *priv; uint8_t sr; int ret; finfo("spi: %p\n", spi); /* Allocate a state structure (we allocate the structure instead of using a * fixed, static allocation so that we can handle multiple FLASH devices. * The current implementation would handle only one FLASH part per SPI * device (only because of the SPIDEV_FLASH(0) definition) and so would * have to be extended to handle multiple FLASH parts on the same SPI bus. */ priv = (FAR struct at45db_dev_s *)kmm_zalloc(sizeof(struct at45db_dev_s)); if (priv) { /* Initialize the allocated structure. (unsupported methods were * nullified by kmm_zalloc). */ priv->mtd.erase = at45db_erase; priv->mtd.bread = at45db_bread; priv->mtd.bwrite = at45db_bwrite; priv->mtd.read = at45db_read; priv->mtd.ioctl = at45db_ioctl; priv->mtd.name = "at45db"; priv->spi = spi; /* Deselect the FLASH */ SPI_SELECT(spi, SPIDEV_FLASH(0), false); /* Lock and configure the SPI bus. */ at45db_lock(priv); at45db_resume(priv); /* Identify the FLASH chip and get its capacity */ ret = at45db_rdid(priv); if (ret != OK) { /* Unrecognized! * Discard all of that work we just did and return NULL */ ferr("ERROR: Unrecognized\n"); goto errout; } /* Get the value of the status register * (as soon as the device is ready) */ sr = at45db_waitbusy(priv); /* Check if the device is configured as 256, 512 or 1024 * bytes-per-page device. */ if ((sr & AT45DB_SR_PGSIZE) == 0) { /* No, re-program it for the binary page size. * NOTE: * A power cycle is required after the device has be re-programmed. */ fwarn("WARNING: Reprogramming page size\n"); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true); SPI_SNDBLOCK(priv->spi, g_binpgsize, BINPGSIZE_SIZE); SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false); goto errout; } /* Release the lock and power down the device */ at45db_pwrdown(priv); at45db_unlock(priv); } finfo("Return %p\n", priv); return (FAR struct mtd_dev_s *)priv; /* On any failure, we need free memory allocations and release the lock * that we hold on the SPI bus. On failures, assume that we cannot talk * to the device to do any more. */ errout: at45db_unlock(priv); kmm_free(priv); return NULL; }