/**************************************************************************** * configs/sama5d3x-ek/scripts/pg-isram.ld * * Copyright (C) 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* The SAMA5D3 has 128 KB of ISRAM beginning at virtual address 0x0030:0000. * The .text vitual address space begins at the same location as the physical * address space: 0x0030:0000. The virtual space is broken up into three * regions: * * PHYSICAL VIRTUAL * NAME DESCRIPTION SIZE START SIZE START * -------- -------------------------- ----- ----------- ------- ----------- * locked Pages locked in memory. 40KB 0x0030:0000 40KB 0x0030:0000 * paged Pages in nonvolatile store. 48KB 0x0030:a000 48KB 0x0030:a000 * data .data/.bss/heap. 24KB 0x0031:6000 24KB 0x0031:6000 * Reserved for page table 16KB 0x0031:c000 16KB 0x0031:c000 * -------- -------------------------- ----- ----------- ------- ----------- * 128KB 0x0032 0000 128KB 0x0032 0000 * * These region sizes must match the size in pages specified for each region * in the NuttX configuration file: CONFIG_PAGING_NLOCKED, CONFIG_PAGING_NVPAGED, * and CONFIG_PAGING_NDATA. * * NOTE 1: The locked region is should be big here so that you can enable lots of * debug output without overflowing the locked region. 32KB would probably be * plenty if this were a real, optimized application. * * NOTE 2: Different compilers will compile the code to different sizes. If you * get a link time error saying that the locked region is full, you may have to * re-organize this memory layout (here and in defconfig) to make the locked * region even bigger. * * NOTE 3: Vectors in low memory are assumed and 16KB of ISRAM is reserved at * the high end of ISRAM for the page table (?). */ MEMORY { locked (rx) : ORIGIN = 0x00300000, LENGTH = 40K paged (rx) : ORIGIN = 0x0030a000, LENGTH = 48K data (rw) : ORIGIN = 0x00316000, LENGTH = 24K } OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(entry) ENTRY(_stext) SECTIONS { .locked : { _slocked = ABSOLUTE(.); *(.vectors) up_head.o locked.r (.text .text.*) up_head.o locked.r (.fixup) up_head.o locked.r (.gnu.warning) up_head.o locked.r (.rodata .rodata.*) up_head.o locked.r (.gnu.linkonce.t.*) up_head.o locked.r (.glue_7) up_head.o locked.r (.glue_7t) up_head.o locked.r (.got) up_head.o locked.r (.gcc_except_table) up_head.o locked.r (.gnu.linkonce.r.*) _elocked = ABSOLUTE(.); } >locked .init_section : { _sinit = ABSOLUTE(.); *(.init_array .init_array.*) _einit = ABSOLUTE(.); } > locked /* .ARM.exidx is sorted, so has to go in its own output section. */ PROVIDE_HIDDEN (__exidx_start = .); .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > isram PROVIDE_HIDDEN (__exidx_end = .); .paged : { _spaged = ABSOLUTE(.); *(.text .text.*) *(.fixup) *(.gnu.warning) *(.rodata .rodata.*) *(.gnu.linkonce.t.*) *(.glue_7) *(.glue_7t) *(.got) *(.gcc_except_table) *(.gnu.linkonce.r.*) *(.ARM.extab*) *(.gnu.linkonce.armextab.*) _epaged = ABSOLUTE(.); } > paged .data : { _sdata = ABSOLUTE(.); *(.data .data.*) *(.gnu.linkonce.d.*) CONSTRUCTORS _edata = ABSOLUTE(.); } > data AT > locked .bss : { _sbss = ABSOLUTE(.); *(.bss .bss.*) *(.gnu.linkonce.b.*) *(COMMON) _ebss = ABSOLUTE(.); } > data /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_info 0 : { *(.debug_info) } .debug_line 0 : { *(.debug_line) } .debug_pubnames 0 : { *(.debug_pubnames) } .debug_aranges 0 : { *(.debug_aranges) } }