#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_STM32F411_MINIMUM

config STM32F411MINIMUM_USBHOST_STACKSIZE
	int "USB host waiter stack size"
	default 1024
	depends on USBHOST

config STM32F411MINIMUM_USBHOST_PRIO
	int "USB host waiter task priority"
	default 100
	depends on USBHOST

config STM32F411MINIMUM_FLASH
	bool "MTD driver for external 8Mbyte W25Q64FV FLASH on SPI1"
	default n
	select MTD
	select MTD_W25
	select MTD_SMART
	select FS_SMARTFS
	select STM32_SPI1
	select MTD_BYTE_WRITE
	---help---
		Configures an MTD device for use with the onboard flash

config STM32F411MINIMUM_FLASH_MINOR
	int "Minor number for the FLASH /dev/smart entry"
	default 0
	depends on STM32F411MINIMUM_FLASH
	---help---
		Sets the minor number for the FLASH MTD /dev entry

menuconfig STM32F411MINIMUM_HX711
	bool "Enable hx711 scale sensor"
	default n
	select ADC_HX711

if STM32F411MINIMUM_HX711

choice
	prompt "Select GPIO port for clock pin"
	default STM32F411MINIMUM_HX711_CLK_PORTA

config STM32F411MINIMUM_HX711_CLK_PORTA
	bool "Port A"
config STM32F411MINIMUM_HX711_CLK_PORTB
	bool "Port B"

endchoice # Select GPIO port for clock pin

config STM32F411MINIMUM_HX711_CLK_PIN
	int "Select GPIO pin number for clock pin"
	default 1
	range 0 15

choice
	prompt "Select GPIO port for data pin"
	default STM32F411MINIMUM_HX711_DATA_PORTA

config STM32F411MINIMUM_HX711_DATA_PORTA
	bool "Port A"
config STM32F411MINIMUM_HX711_DATA_PORTB
	bool "Port B"

endchoice # Select GPIO port for data pin

config STM32F411MINIMUM_HX711_DATA_PIN
	int "Select GPIO pin number for data pin"
	default 2
	range 0 15

endif # STM32F411MINIMUM_HX711

menuconfig STM32F411MINIMUM_GPIO
	select DEV_GPIO
	bool "enable gpio subsystem"

if STM32F411MINIMUM_GPIO
source "boards/arm/stm32/stm32f411-minimum/Kconfig.gpio"
endif

endif