/**************************************************************************** * drivers/wireless/ieee802154/mrf24j40/mrf24j40_getset.c * * Copyright (C) 2015-2016 Sebastien Lorquet. All rights reserved. * Copyright (C) 2017 Verge Inc. All rights reserved. * Author: Sebastien Lorquet * Author: Anthony Merlino * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include "mrf24j40.h" #include "mrf24j40_reg.h" #include "mrf24j40_regops.h" #include "mrf24j40_getset.h" /**************************************************************************** * Name: mrf24j40_setrxmode * * Description: * Set the RX mode (normal, promiscuous, no CRC) * ****************************************************************************/ int mrf24j40_setrxmode(FAR struct mrf24j40_radio_s *dev, int mode) { uint8_t reg; if (mode < MRF24J40_RXMODE_NORMAL || mode > MRF24J40_RXMODE_NOCRC) { return -EINVAL; } reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR); reg &= ~0x03; reg |= mode; /* Set mode options */ if (mode != MRF24J40_RXMODE_NORMAL) { /* Promisc and error modes: Disable auto ACK */ reg |= MRF24J40_RXMCR_NOACKRSP; } else { /* Normal mode : enable auto-ACK */ reg &= ~MRF24J40_RXMCR_NOACKRSP; } mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg); dev->rxmode = mode; wlinfo("%u\n", (unsigned)mode); return OK; } /**************************************************************************** * Name: mrf24j40_setchannel * * Description: * Define the current radio channel the device is operating on. * In the 2.4 GHz, there are 16 channels, each 2 MHz wide, 5 MHz spacing: * Chan MHz Chan MHz Chan MHz Chan MHz * 11 2405 15 2425 19 2445 23 2465 * 12 2410 16 2430 20 2450 24 2470 * 13 2415 17 2435 21 2455 25 2475 * 14 2420 18 2440 22 2460 26 2480 * ****************************************************************************/ int mrf24j40_setchannel(FAR struct mrf24j40_radio_s *dev, uint8_t chan) { if (chan < 11 || chan > 26) { wlerr("ERROR: Invalid chan: %d\n",chan); return -EINVAL; } /* 15. Set channel – See Section 3.4 “Channel Selection”. */ mrf24j40_setreg(dev->spi, MRF24J40_RFCON0, (chan - 11) << 4 | 0x03); /* 17. RFCTL (0x36) = 0x04 – Reset RF state machine. * 18. RFCTL (0x36) = 0x00. */ mrf24j40_resetrfsm(dev); dev->chan = chan; wlinfo("%u\n", (unsigned)chan); return OK; } /**************************************************************************** * Name: mrf24j40_setpanid * * Description: * Define the PAN ID the device is operating on. * ****************************************************************************/ int mrf24j40_setpanid(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *panid) { mrf24j40_setreg(dev->spi, MRF24J40_PANIDL, panid[0]); mrf24j40_setreg(dev->spi, MRF24J40_PANIDH, panid[1]); IEEE802154_PANIDCOPY(dev->addr.panid, panid); wlinfo("%02X:%02X\n", panid[0], panid[1]); return OK; } /**************************************************************************** * Name: mrf24j40_setsaddr * * Description: * Define the device short address. The following addresses are special: * FFFEh : Broadcast * FFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setsaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *saddr) { mrf24j40_setreg(dev->spi, MRF24J40_SADRL, saddr[0]); mrf24j40_setreg(dev->spi, MRF24J40_SADRH, saddr[1]); IEEE802154_SADDRCOPY(dev->addr.saddr, saddr); wlinfo("%02X:%02X\n", saddr[0], saddr[1]); return OK; } /**************************************************************************** * Name: mrf24j40_seteaddr * * Description: * Define the device extended address. The following addresses are special: * FFFFFFFFFFFFFFFFh : Unspecified * ****************************************************************************/ int mrf24j40_seteaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *eaddr) { int i; for (i = 0; i < 8; i++) { mrf24j40_setreg(dev->spi, MRF24J40_EADR0 + i, eaddr[i]); dev->addr.eaddr[i] = eaddr[i]; } wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1], eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]); return OK; } /**************************************************************************** * Name: mrf24j40_setcoordsaddr * * Description: * Define the coordinator short address. The following addresses are special: * FFFEh : Broadcast * FFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setcoordsaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *saddr) { mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR0, saddr[0]); mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR1, saddr[1]); IEEE802154_SADDRCOPY(dev->addr.saddr, saddr); wlinfo("%02X:%02X\n", saddr[0], saddr[1]); return OK; } /**************************************************************************** * Name: mrf24j40_setcoordeaddr * * Description: * Define the coordinator extended address. The following addresses are special: * FFFFFFFFFFFFFFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setcoordeaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *eaddr) { int i; for (i = 0; i < 8; i++) { mrf24j40_setreg(dev->spi, MRF24J40_ASSOEADR0 + i, eaddr[i]); dev->addr.eaddr[i] = eaddr[i]; } wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1], eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]); return OK; } /**************************************************************************** * Name: mrf24j40_setdevmode * * Description: * Define the device behaviour: normal end device or coordinator * ****************************************************************************/ int mrf24j40_setdevmode(FAR struct mrf24j40_radio_s *dev, uint8_t mode) { int ret = OK; uint8_t reg; /* Disable slotted mode until I decide to implement slotted mode */ reg = mrf24j40_getreg(dev->spi, MRF24J40_TXMCR); reg &= ~MRF24J40_TXMCR_SLOTTED; mrf24j40_setreg(dev->spi, MRF24J40_TXMCR, reg); mrf24j40_setreg(dev->spi, MRF24J40_ORDER, 0xFF); /* Define dev mode */ reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR); if (mode == MRF24J40_MODE_PANCOORD) { reg |= MRF24J40_RXMCR_PANCOORD; reg &= ~MRF24J40_RXMCR_COORD; } else if (mode == MRF24J40_MODE_COORD) { reg |= MRF24J40_RXMCR_COORD; reg &= ~MRF24J40_RXMCR_PANCOORD; } else if (mode == MRF24J40_MODE_DEVICE) { reg &= ~MRF24J40_RXMCR_PANCOORD; reg &= ~MRF24J40_RXMCR_COORD; } else { return -EINVAL; } mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg); dev->devmode = mode; return ret; } /**************************************************************************** * Name: mrf24j40_settxpower * * Description: * Define the transmit power. Value is passed in mBm, it is rounded to * the nearest value. Some MRF modules have a power amplifier, this routine * does not care about this. We only change the CHIP output power. * ****************************************************************************/ int mrf24j40_settxpower(FAR struct mrf24j40_radio_s *dev, int32_t txpwr) { uint8_t reg; int save_txpwr = txpwr; if (txpwr <= -3000 && txpwr > -3630) { reg = 0xC0; txpwr += 3000; } else if (txpwr <= -2000) { reg = 0x80; txpwr += 2000; } else if (txpwr <= -1000) { reg = 0x40; txpwr += 1000; } else if (txpwr <= 0) { reg = 0x00; } else { return -EINVAL; } wlinfo("Remaining attenuation: %d mBm\n",txpwr); switch(txpwr/100) { case -9: case -8: case -7: case -6: reg |= 0x07; break; case -5: reg |= 0x06; break; case -4: reg |= 0x05; break; case -3: reg |= 0x04; break; case -2: reg |= 0x03; break; case -1: reg |= 0x02; break; case 0: reg |= 0x00; /* value 0x01 is 0.5 db, not used */ break; default: return -EINVAL; } mrf24j40_setreg(dev->spi, MRF24J40_RFCON3, reg); dev->txpower = save_txpwr; return OK; } /**************************************************************************** * Name: mrf24j40_setcca * * Description: * Define the Clear Channel Assessement method. * ****************************************************************************/ int mrf24j40_setcca(FAR struct mrf24j40_radio_s *dev, FAR struct ieee802154_cca_s *cca) { uint8_t mode; if (!cca->use_ed && !cca->use_cs) { return -EINVAL; } if (cca->use_cs && cca->csth > 0x0f) { return -EINVAL; } mode = mrf24j40_getreg(dev->spi, MRF24J40_BBREG2); mode &= 0x03; if (cca->use_ed) { mode |= MRF24J40_BBREG2_CCAMODE_ED; mrf24j40_setreg(dev->spi, MRF24J40_CCAEDTH, cca->edth); } if (cca->use_cs) { mode |= MRF24J40_BBREG2_CCAMODE_CS; mode |= cca->csth << 2; } mrf24j40_setreg(dev->spi, MRF24J40_BBREG2, mode); memcpy(&dev->cca, cca, sizeof(struct ieee802154_cca_s)); return OK; }