/************************************************************************************ * arch/arm/include/efm32/chip.h * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_ARM_INCLUDE_EFM32_CHIP_H #define __ARCH_ARM_INCLUDE_EFM32_CHIP_H /************************************************************************************ * Included Files ************************************************************************************/ #include /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* EFM32 EnergyMicro ****************************************************************/ /* Tiny Gecko with 32KiB FLASH and 4KiB RAM in a QFN64 package */ #if defined(CONFIG_ARCH_CHIP_EFM32TG840F32) /* Gecko with 128KiB FLASH and 16KiB SRAM in LQFP100 (EFM32G880F128) or BGA112 * (EFM32G890F128) package */ #elif defined(CONFIG_ARCH_CHIP_EFM32G880F128) || \ defined(CONFIG_ARCH_CHIP_EFM32G890F128) /* Giant Gecko with 1024KiB FLASH and 128KiB RAM in a QFP64 package * (EFM32GG332F1024) or BGA112 (EFM32GG990F1024) package */ #elif defined(CONFIG_ARCH_CHIP_EFM32GG332F1024) || \ defined(CONFIG_ARCH_CHIP_EFM32GG990F1024) #else # error "Unsupported EFM32 chip" #endif /* NVIC priority levels *************************************************************/ #define NVIC_SYSH_PRIORITY_MIN 0xe0 /* Bits [7:5] set in minimum priority */ #define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */ #define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */ #define NVIC_SYSH_PRIORITY_STEP 0x20 /* Three bits of interrupt priority used */ /* If CONFIG_ARMV7M_USEBASEPRI is selected, then interrupts will be disabled * by setting the BASEPRI register to NVIC_SYSH_DISABLE_PRIORITY so that most * interrupts will not have execution priority. SVCall must have execution * priority in all cases. * * In the normal cases, interrupts are not nest-able and all interrupts run * at an execution priority between NVIC_SYSH_PRIORITY_MIN and * NVIC_SYSH_PRIORITY_MAX (with NVIC_SYSH_PRIORITY_MAX reserved for SVCall). * * If, in addition, CONFIG_ARCH_HIPRI_INTERRUPT is defined, then special * high priority interrupts are supported. These are not "nested" in the * normal sense of the word. These high priority interrupts can interrupt * normal processing but execute outside of OS (although they can "get back * into the game" via a PendSV interrupt). * * In the normal course of things, interrupts must occasionally be disabled * using the irqsave() inline function to prevent contention in use of * resources that may be shared between interrupt level and non-interrupt * level logic. Now the question arises, if CONFIG_ARCH_HIPRI_INTERRUPT, * do we disable all interrupts (except SVCall), or do we only disable the * "normal" interrupts. Since the high priority interrupts cannot interact * with the OS, you may want to permit the high priority interrupts even if * interrupts are disabled. The setting CONFIG_ARCH_INT_DISABLEALL can be * used to select either behavior: * * ----------------------------+--------------+---------------------------- * CONFIG_ARCH_HIPRI_INTERRUPT | NO | YES * ----------------------------+--------------+--------------+------------- * CONFIG_ARCH_INT_DISABLEALL | N/A | YES | NO * ----------------------------+--------------+--------------+------------- * | | | SVCall * | SVCall | SVCall | HIGH * Disable here and below --------> MAXNORMAL ---> HIGH --------> MAXNORMAL * | | MAXNORMAL | * ----------------------------+--------------+--------------+------------- */ #if defined(CONFIG_ARCH_HIPRI_INTERRUPT) && defined(CONFIG_ARCH_INT_DISABLEALL) # define NVIC_SYSH_MAXNORMAL_PRIORITY (NVIC_SYSH_PRIORITY_MAX + 2*NVIC_SYSH_PRIORITY_STEP) # define NVIC_SYSH_HIGH_PRIORITY (NVIC_SYSH_PRIORITY_MAX + NVIC_SYSH_PRIORITY_STEP) # define NVIC_SYSH_DISABLE_PRIORITY NVIC_SYSH_HIGH_PRIORITY # define NVIC_SYSH_SVCALL_PRIORITY NVIC_SYSH_PRIORITY_MAX #else # define NVIC_SYSH_MAXNORMAL_PRIORITY (NVIC_SYSH_PRIORITY_MAX + NVIC_SYSH_PRIORITY_STEP) # define NVIC_SYSH_HIGH_PRIORITY NVIC_SYSH_PRIORITY_MAX # define NVIC_SYSH_DISABLE_PRIORITY NVIC_SYSH_MAXNORMAL_PRIORITY # define NVIC_SYSH_SVCALL_PRIORITY NVIC_SYSH_PRIORITY_MAX #endif #endif /* __ARCH_ARM_INCLUDE_EFM32_CHIP_H */