/************************************************************************************ * configs/olimex-stm32-h407/include/board.h * * Copyright (C) 2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * Modified for H407 Neil Hancock * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H #define __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H 1 /************************************************************************************ * Included Files ************************************************************************************/ #include #ifndef __ASSEMBLY__ # include # include #endif #ifdef __KERNEL__ # include "stm32_rcc.h" # include "stm32_sdio.h" # include "stm32.h" #endif /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* Clocking *************************************************************************/ /* The Olimex-STM32-H407 board features a 12MHz crystal and * a 32kHz RTC backup crystal. * * This is the canonical configuration: * System Clock source : PLL (HSE) * SYSCLK(Hz) : 168000000 Determined by PLL configuration * HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE) * AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE) * APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1) * APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2) * HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL) * PLLM : 8 (STM32_PLLCFG_PLLM) * PLLN : 336 (STM32_PLLCFG_PLLN) * PLLP : 2 (STM32_PLLCFG_PLLP) * PLLQ : 7 (STM32_PLLCFG_PLLQ) * Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK * Flash Latency(WS) : 5 * Prefetch Buffer : OFF * Instruction cache : ON * Data cache : ON * Require 48MHz for USB OTG FS, : Enabled * SDIO and RNG clock */ /* HSI - 16 MHz RC factory-trimmed * LSI - 32 KHz RC (30-60KHz, uncalibrated) * HSE - On-board crystal frequency is 12MHz * LSE - 32.768 kHz * STM32F407ZGT6 - too 168Mhz */ #define STM32_BOARD_XTAL 12000000ul #define STM32_HSI_FREQUENCY 16000000ul #define STM32_LSI_FREQUENCY 32000 #define STM32_HSE_FREQUENCY STM32_BOARD_XTAL #define STM32_LSE_FREQUENCY 32768 /* Main PLL Configuration. * * PLL source is HSE * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN * = (25,000,000 / 12) * 360 * = 240,000,000 * SYSCLK = PLL_VCO / PLLP * = 240,000,000 / 2 = 120,000,000 * USB OTG FS, SDIO and RNG Clock * = PLL_VCO / PLLQ * = 240,000,000 / 5 = 48,000,000 * = 48,000,000 * * Xtal /M *n /P SysClk AHB HCLK APB1 PCLK1 * 12Mhz HSE /12 336 /2 PLLCLK 168Mhz /1 168 /4 42Mhz * 12Mhz HSE /6 168 /2 PLLCLK 168Mhz /1 168 /4 42Mhz */ #define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(3) #define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(84) #define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2 #define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5) #define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7) #define STM32_SYSCLK_FREQUENCY 168000000ul /* AHB clock (HCLK) is SYSCLK (168MHz) */ #define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ #define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY #define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ /* APB1 clock (PCLK1) is HCLK/4 (42MHz) */ #define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */ #define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4) /* Timers driven from APB1 will be twice PCLK1 */ #define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) /* APB2 clock (PCLK2) is HCLK/2 */ #define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ #define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) /* Timers driven from APB2 will be twice PCLK2 */ #define STM32_APB2_TIM1_CLKIN (2 * STM32_PCLK2_FREQUENCY) #define STM32_APB2_TIM8_CLKIN (2 * STM32_PCLK2_FREQUENCY) #define STM32_APB2_TIM9_CLKIN (2 * STM32_PCLK2_FREQUENCY) #define STM32_APB2_TIM10_CLKIN (2 * STM32_PCLK2_FREQUENCY) #define STM32_APB2_TIM11_CLKIN (2 * STM32_PCLK2_FREQUENCY) /* Timer Frequencies, if APBx is set to 1, frequency is same to APBx * otherwise frequency is 2xAPBx. * Note: TIM1,8 are on APB2, others on APB1 */ #define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY #define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2) #define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY /* SDIO dividers. Note that slower clocking is required when DMA is disabled * in order to avoid RX overrun/TX underrun errors due to delayed responses * to service FIFOs in interrupt driven mode. These values have not been * tuned!!! * * SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz */ #define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT) /* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz */ #ifdef CONFIG_SDIO_DMA # define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT) #else # define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT) #endif /* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz */ #ifdef CONFIG_SDIO_DMA # define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT) #else # define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT) #endif /* LED definitions ******************************************************************/ /* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any * way. The following definitions are used to access individual LEDs. */ /* LED index values for use with board_userled() */ #define BOARD_LED_STATUS 0 #define BOARD_NLEDS 1 /* LED bits for use with board_userled_all() */ #define BOARD_LED_STATUS_BIT (1 << BOARD_LED_STATUS) /* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the * Olimex STM32-H405. The following definitions describe how NuttX controls the LEDs: */ #define LED_STARTED 0 /* LED_STATUS on */ #define LED_HEAPALLOCATE 1 /* no change */ #define LED_IRQSENABLED 2 /* no change */ #define LED_STACKCREATED 3 /* no change */ #define LED_INIRQ 4 /* no change */ #define LED_SIGNAL 5 /* no change */ #define LED_ASSERTION 6 /* LED_STATUS off */ #define LED_PANIC 7 /* LED_STATUS blinking */ /* Button definitions ***************************************************************/ /* The Olimex STM32-H405 supports one buttons: */ #define BUTTON_BUT 0 #define NUM_BUTTONS 1 #define BUTTON_BUT_BIT (1 << BUTTON_BUT) /* Alternate function pin selections ************************************************/ /* USART3: */ #if 0 #define GPIO_USART3_RX GPIO_USART3_RX_1 /* PB11 */ #define GPIO_USART3_TX GPIO_USART3_TX_1 /* PB10 */ #define GPIO_USART3_CTS GPIO_USART3_CTS_1 /* PB13 */ #define GPIO_USART3_RTS GPIO_USART3_RTS_1 /* PB14 */ #endif /* USART2: */ #define GPIO_USART2_RX GPIO_USART2_RX_1 #define GPIO_USART2_TX GPIO_USART2_TX_1 #define GPIO_USART2_CTS GPIO_USART2_CTS_1 #define GPIO_USART2_RTS GPIO_USART2_RTS_1 /* USART6: (UEXT connector) */ #define GPIO_USART6_RX GPIO_USART6_RX_1 #define GPIO_USART6_TX GPIO_USART6_TX_1 /* GPIO_USART6_CTS and GPIO_USART6_RTS aren't used for UEXT */ /* CAN: */ #define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */ #define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */ #define GPIO_CAN2_RX GPIO_CAN1_RX_2 /* PB5 */ #define GPIO_CAN2_TX GPIO_CAN1_TX_2 /* PB6 */ /* DMA Channl/Stream Selections *****************************************************/ /* Stream selections are arbitrary for now but might become important in the future * if we set aside more DMA channels/streams. * * SDIO DMA * DMAMAP_SDIO_1 = Channel 4, Stream 3 * DMAMAP_SDIO_2 = Channel 4, Stream 6 */ #define DMAMAP_SDIO DMAMAP_SDIO_1 /************************************************************************************ * Public Data ************************************************************************************/ #ifndef __ASSEMBLY__ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /************************************************************************************ * Public Function Prototypes ************************************************************************************/ /************************************************************************************ * Name: stm32_boardinitialize * * Description: * All STM32 architectures must provide the following entry point. This entry point * is called early in the initialization -- after all memory has been configured * and mapped but before any devices have been initialized. * ************************************************************************************/ void stm32_boardinitialize(void); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H */