/**************************************************************************** * drivers/leds/pca9635pw.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #if defined(CONFIG_I2C) && defined(CONFIG_PCA9635PW) /**************************************************************************** * Private Type Definitions ****************************************************************************/ struct pca9635pw_dev_s { FAR struct i2c_master_s *i2c; uint8_t i2c_addr; }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv, uint8_t const reg_addr, uint8_t const reg_val); static int pca9635pw_set_led_mode(FAR struct pca9635pw_dev_s *priv, uint8_t const led_out_x_mode); static int pca9635pw_open(FAR struct file *filep); static int pca9635pw_close(FAR struct file *filep); static int pca9635pw_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_pca9635pw_fileops = { pca9635pw_open, /* open */ pca9635pw_close, /* close */ NULL, /* read */ NULL, /* write */ NULL, /* seek */ pca9635pw_ioctl, /* ioctl */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: pca9635pw_i2c_write_byte * * Description: * Write a single byte to one of the PCA9635PW configuration registers. * ****************************************************************************/ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv, uint8_t const reg_addr, uint8_t const reg_val) { struct i2c_config_s config; int ret; /* assemble the 2 byte message comprised of reg_addr and reg_val */ uint8_t const BUFFER_SIZE = 2; uint8_t buffer[BUFFER_SIZE]; buffer[0] = reg_addr; buffer[1] = reg_val; /* Setup up the I2C configuration */ config.frequency = I2C_BUS_FREQ_HZ; config.address = priv->i2c_addr; config.addrlen = 7; /* Write the register address followed by the data (no RESTART) */ lcdinfo("i2c addr: 0x%02X reg addr: 0x%02X value: 0x%02X\n", priv->i2c_addr, buffer[0], buffer[1]); ret = i2c_write(priv->i2c, &config, buffer, BUFFER_SIZE); if (ret < 0) { lcderr("ERROR: i2c_write returned error code %d\n", ret); return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_set_led_mode * * Description: * Set the led output mode (see PCA9635PW_LED_OUT_x register value * definitions) * ****************************************************************************/ static int pca9635pw_set_led_mode(FAR struct pca9635pw_dev_s *priv, uint8_t const led_out_x_mode) { uint8_t current_ledout_reg = PCA9635PW_LED_OUT_0; for (; current_ledout_reg <= PCA9635PW_LED_OUT_3; current_ledout_reg++) { int const ret = pca9635pw_i2c_write_byte(priv, current_ledout_reg, led_out_x_mode); if (ret < 0) { return ret; } } return OK; } /**************************************************************************** * Name: pca9635pw_open * * Description: * This function is called whenever a PCA9635PW device is opened. * ****************************************************************************/ static int pca9635pw_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = -1; /* Wake up the PCA9635PW (sleep bit PCA9635PW_MODE_1_SLEEP is set to zero * and enable register auto increment - this way we can write to multiple * consecutive I2C registers without having to always write first the * address and then the data byte. */ uint8_t const PCA9635PW_MODE_1_INITIAL_VALUE = PCA9635PW_MODE_1_AI2; ret = pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_1, PCA9635PW_MODE_1_INITIAL_VALUE); if (ret < 0) { lcderr("ERROR: Could not set initial config for PCA9635PW_MODE_1\n"); return ret; } /* Configure the PCA9635PW output drivers for totem-pole structure since * the output of the PCA9635PW are coupled with the Gates of MOSFET's * which then drive the LED's. Since we have this kind of schematic * structure we also need to invert the output. */ uint8_t const PCA9635PW_MODE_2_INITIAL_VALUE = PCA9635PW_MODE_2_INVRT | PCA9635PW_MODE_2_OUTDRV; ret = pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_2, PCA9635PW_MODE_2_INITIAL_VALUE); if (ret < 0) { lcderr("ERROR: Could not set initial config for PCA9635PW_MODE_2\n"); return ret; } /* A delay of 500 us is necessary since this is the maximum time which the * oscillator of the PCA9635PW needs to be up and running once sleep mode * was left. */ nxsig_usleep(500); /* Turn all led drivers to mode 2 in which the led brightness is controlled * by the individual pwm registers. */ ret = pca9635pw_set_led_mode(priv, PCA9635PW_LED_OUT_X_MODE_2); if (ret < 0) { lcderr("ERROR: Could not set led driver outputs to MODE2" " (LED's brightness are controlled by pwm registers)\n"); return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_close * * Description: * This function is called whenever a PCA9635PW device is closed. * ****************************************************************************/ static int pca9635pw_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = -1; /* Turn all led drivers off */ ret = pca9635pw_set_led_mode(priv, PCA9635PW_LED_OUT_X_MODE_0); if (ret < 0) { lcderr("ERROR: Could not set led driver outputs to MODE0" " (LED's are off)\n"); return ret; } /* Send the PCA9635PW back to sleep mode */ uint8_t const PCA9635PW_MODE_1_FINAL_VALUE = PCA9635PW_MODE_1_SLEEP; ret = pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_1, PCA9635PW_MODE_1_FINAL_VALUE); if (ret < 0) { return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_close * * Description: * This function is called whenever an ioctl call to a PCA9635PW is * performed. * ****************************************************************************/ static int pca9635pw_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = OK; lcdinfo("cmd: %d arg: %ld\n", cmd, arg); switch (cmd) { /* Set the brightness of an individual LED. * Arg: pca9635pw_brightness_s pointer. */ case PWMIOC_SETLED_BRIGHTNESS: { /* Retrieve the information handed over as argument for this ioctl */ FAR const struct pca9635pw_brightness_s *ptr = (FAR const struct pca9635pw_brightness_s *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); /* Set the brightness of the led */ ret = pca9635pw_i2c_write_byte(priv, ptr->led, ptr->brightness); } break; /* The used ioctl command was invalid */ default: { lcderr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; } break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: pca9635pw_register * * Description: * Register the PCA9635PW device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/leddrv0". * i2c - An instance of the I2C interface to use to communicate * with the LM92. * pca9635pw_i2c_addr * - The I2C address of the PCA9635PW. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int pca9635pw_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, uint8_t const pca9635pw_i2c_addr) { /* Sanity check */ DEBUGASSERT(i2c != NULL); /* Initialize the PCA9635PW device structure */ FAR struct pca9635pw_dev_s *priv = (FAR struct pca9635pw_dev_s *)kmm_malloc(sizeof(struct pca9635pw_dev_s)); if (priv == NULL) { lcderr("ERROR: Failed to allocate instance of pca9635pw_dev_s\n"); return -ENOMEM; } priv->i2c = i2c; priv->i2c_addr = pca9635pw_i2c_addr; /* Register the character driver */ int const ret = register_driver(devpath, &g_pca9635pw_fileops, 0222, priv); if (ret != OK) { lcderr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); return ret; } return OK; } #endif /* CONFIG_I2C && CONFIG_I2C_PCA9635PW */