/**************************************************************************** * drivers/mtd/filemtd.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef CONFIG_FILEMTD_BLOCKSIZE # define CONFIG_FILEMTD_BLOCKSIZE 512 #endif #ifndef CONFIG_FILEMTD_ERASESIZE # define CONFIG_FILEMTD_ERASESIZE 4096 #endif #ifndef CONFIG_FILEMTD_ERASESTATE # define CONFIG_FILEMTD_ERASESTATE 0xff #endif #if CONFIG_FILEMTD_ERASESTATE != 0xff && CONFIG_FILEMTD_ERASESTATE != 0x00 # error "Unsupported value for CONFIG_FILEMTD_ERASESTATE" #endif #if CONFIG_FILEMTD_BLOCKSIZE > CONFIG_FILEMTD_ERASESIZE # error "Must have CONFIG_FILEMTD_BLOCKSIZE <= CONFIG_FILEMTD_ERASESIZE" #endif #undef FILEMTD_BLKPER #define FILEMTD_BLKPER (CONFIG_FILEMTD_ERASESIZE/CONFIG_FILEMTD_BLOCKSIZE) #if FILEMTD_BLKPER*CONFIG_FILEMTD_BLOCKSIZE != CONFIG_FILEMTD_ERASESIZE # error "CONFIG_FILEMTD_ERASESIZE must be an even multiple of CONFIG_FILEMTD_BLOCKSIZE" #endif /**************************************************************************** * Private Types ****************************************************************************/ /* This type represents the state of the MTD device. The struct mtd_dev_s * must appear at the beginning of the definition so that you can freely * cast between pointers to struct mtd_dev_s and struct file_dev_s. */ struct file_dev_s { struct mtd_dev_s mtd; /* MTD device */ struct file mtdfile; size_t nblocks; /* Number of erase blocks */ size_t offset; /* Offset from start of file */ size_t erasesize; /* Offset from start of file */ size_t blocksize; /* Offset from start of file */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static ssize_t filemtd_read(FAR struct file_dev_s *priv, FAR unsigned char *buffer, size_t offsetbytes, unsigned int nbytes); static ssize_t filemtd_write(FAR struct file_dev_s *priv, size_t offset, FAR const void *src, size_t len); /* MTD driver methods */ static int filemtd_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); static ssize_t filemtd_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR uint8_t *buf); static ssize_t filemtd_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR const uint8_t *buf); static ssize_t filemtd_byteread(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buf); #ifdef CONFIG_MTD_BYTE_WRITE static ssize_t file_bytewrite(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR const uint8_t *buf); #endif static int filemtd_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: filemtd_write ****************************************************************************/ static ssize_t filemtd_write(FAR struct file_dev_s *priv, size_t offset, FAR const void *src, size_t len) { FAR const uint8_t *pin = (FAR const uint8_t *)src; FAR uint8_t *pout; char buf[128]; int buflen = 0; uint8_t oldvalue; uint8_t srcvalue; uint8_t newvalue; size_t seekpos; /* Set the starting location in the file */ seekpos = priv->offset + offset; while (len-- > 0) { if (buflen == 0) { /* Read more data from the file */ file_seek(&priv->mtdfile, seekpos, SEEK_SET); buflen = file_read(&priv->mtdfile, buf, sizeof(buf)); pout = (FAR uint8_t *) buf; } /* Get the source and destination values */ oldvalue = *pout; srcvalue = *pin++; /* Get the new destination value, accounting for bits that cannot be * changes because they are not in the erased state. */ #if CONFIG_FILEMTD_ERASESTATE == 0xff newvalue = oldvalue & srcvalue; /* We can only clear bits */ #else /* CONFIG_FILEMTD_ERASESTATE == 0x00 */ newvalue = oldvalue | srcvalue; /* We can only set bits */ #endif /* Report any attempt to change the value of bits that are not in the * erased state. */ #ifdef CONFIG_DEBUG_FEATURES if (newvalue != srcvalue) { ferr("ERROR: Bad write: source=%02x dest=%02x result=%02x\n", srcvalue, oldvalue, newvalue); } #endif /* Write the modified value to simulated FLASH */ *pout++ = newvalue; buflen--; /* If our buffer is full, then seek back to beginning of * the file and write the buffer contents */ if (buflen == 0) { file_seek(&priv->mtdfile, seekpos, SEEK_SET); file_write(&priv->mtdfile, buf, sizeof(buf)); seekpos += sizeof(buf); } } /* Write remaining bytes */ if (buflen != 0) { file_seek(&priv->mtdfile, seekpos, SEEK_SET); file_write(&priv->mtdfile, buf, sizeof(buf)); } return len; } /**************************************************************************** * Name: filemtd_read ****************************************************************************/ static ssize_t filemtd_read(FAR struct file_dev_s *priv, FAR unsigned char *buffer, size_t offsetbytes, unsigned int nbytes) { /* Set the starting location in the file */ file_seek(&priv->mtdfile, priv->offset + offsetbytes, SEEK_SET); return file_read(&priv->mtdfile, buffer, nbytes); } /**************************************************************************** * Name: filemtd_erase ****************************************************************************/ static int filemtd_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; size_t nbytes; size_t offset; char buffer[128]; DEBUGASSERT(dev); /* Don't let the erase exceed the original size of the file */ if (startblock >= priv->nblocks) { return 0; } if (startblock + nblocks > priv->nblocks) { nblocks = priv->nblocks - startblock; } /* Convert the erase block to a logical block and the number of blocks * in logical block numbers */ startblock *= FILEMTD_BLKPER; nblocks *= FILEMTD_BLKPER; /* Get the offset corresponding to the first block and the size * corresponding to the number of blocks. */ offset = startblock * priv->blocksize; nbytes = nblocks * priv->blocksize; /* Then erase the data in the file */ file_seek(&priv->mtdfile, priv->offset + offset, SEEK_SET); memset(buffer, CONFIG_FILEMTD_ERASESTATE, sizeof(buffer)); while (nbytes) { file_write(&priv->mtdfile, buffer, sizeof(buffer)); nbytes -= sizeof(buffer); } return OK; } /**************************************************************************** * Name: filemtd_bread ****************************************************************************/ static ssize_t filemtd_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR uint8_t *buf) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; off_t offset; off_t maxblock; size_t nbytes; DEBUGASSERT(dev && buf); /* Don't let the read exceed the original size of the file */ maxblock = priv->nblocks * FILEMTD_BLKPER; if (startblock >= maxblock) { return 0; } if (startblock + nblocks > maxblock) { nblocks = maxblock - startblock; } /* Get the offset corresponding to the first block and the size * corresponding to the number of blocks. */ offset = startblock * priv->blocksize; nbytes = nblocks * priv->blocksize; /* Then read the data from the file */ filemtd_read(priv, buf, offset, nbytes); return nblocks; } /**************************************************************************** * Name: filemtd_bwrite ****************************************************************************/ static ssize_t filemtd_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR const uint8_t *buf) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; off_t offset; off_t maxblock; size_t nbytes; DEBUGASSERT(dev && buf); /* Don't let the write exceed the original size of the file */ maxblock = priv->nblocks * FILEMTD_BLKPER; if (startblock >= maxblock) { return 0; } if (startblock + nblocks > maxblock) { nblocks = maxblock - startblock; } /* Get the offset corresponding to the first block and the size * corresponding to the number of blocks. */ offset = startblock * priv->blocksize; nbytes = nblocks * priv->blocksize; /* Then write the data to the file */ filemtd_write(priv, offset, buf, nbytes); return nblocks; } /**************************************************************************** * Name: filemtd_byteread ****************************************************************************/ static ssize_t filemtd_byteread(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buf) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; DEBUGASSERT(dev && buf); /* Don't let read read past end of buffer */ if (offset + nbytes > priv->nblocks * priv->erasesize) { return 0; } filemtd_read(priv, buf, offset, nbytes); return nbytes; } /**************************************************************************** * Name: file_bytewrite ****************************************************************************/ #ifdef CONFIG_MTD_BYTE_WRITE static ssize_t file_bytewrite(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR const uint8_t *buf) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; off_t maxoffset; DEBUGASSERT(dev && buf); /* Don't let the write exceed the original size of the file */ maxoffset = priv->nblocks * priv->erasesize; if (offset + nbytes > maxoffset) { return 0; } /* Then write the data to the file */ filemtd_write(priv, offset, buf, nbytes); return nbytes; } #endif /**************************************************************************** * Name: filemtd_ioctl ****************************************************************************/ static int filemtd_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *)dev; int ret = -EINVAL; /* Assume good command with bad parameters */ switch (cmd) { case MTDIOC_GEOMETRY: { FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); if (geo) { /* Populate the geometry structure with information need to * know the capacity and how to access the device. */ geo->blocksize = priv->blocksize; geo->erasesize = priv->erasesize; geo->neraseblocks = priv->nblocks; ret = OK; } } break; case MTDIOC_XIPBASE: ret = -ENOTTY; /* Bad command */ break; case MTDIOC_BULKERASE: { /* Erase the entire device */ filemtd_erase(dev, 0, priv->nblocks); ret = OK; } break; default: ret = -ENOTTY; /* Bad command */ break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: blockmtd_initialize * * Description: * Create and initialize a BLOCK MTD device instance. * * Input Parameters: * path - Path name of the block device backing the MTD device * ****************************************************************************/ FAR struct mtd_dev_s *blockmtd_initialize(FAR const char *path, size_t offset, size_t mtdlen, int16_t sectsize, int32_t erasesize) { FAR struct file_dev_s *priv; size_t nblocks; int mode; int ret; /* Create an instance of the FILE MTD device state structure */ priv = (FAR struct file_dev_s *)kmm_zalloc(sizeof(struct file_dev_s)); if (!priv) { ferr("ERROR: Failed to allocate the FILE MTD state structure\n"); return NULL; } /* Set the file open mode. */ mode = O_RDOK | O_WROK; /* Try to open the file. NOTE that block devices will use a character * driver proxy. */ ret = file_open(&priv->mtdfile, path, mode); if (ret < 0) { ferr("ERROR: Failed to open the FILE MTD file %s: %d\n", path, ret); kmm_free(priv); return NULL; } /* Set the block size based on the provided sectsize parameter */ if (sectsize <= 0) { priv->blocksize = CONFIG_FILEMTD_BLOCKSIZE; } else { priv->blocksize = sectsize; } /* Set the erase size based on the provided erasesize parameter */ if (erasesize <= 0) { priv->erasesize = CONFIG_FILEMTD_ERASESIZE; } else { priv->erasesize = erasesize; } /* Force the size to be an even number of the erase block size */ nblocks = mtdlen / priv->erasesize; if (nblocks < 3) { ferr("ERROR: Need to provide at least three full erase block\n"); file_close(&priv->mtdfile); kmm_free(priv); return NULL; } /* Perform initialization as necessary. (unsupported methods were * nullified by kmm_zalloc). */ priv->mtd.erase = filemtd_erase; priv->mtd.bread = filemtd_bread; priv->mtd.bwrite = filemtd_bwrite; priv->mtd.read = filemtd_byteread; #ifdef CONFIG_MTD_BYTE_WRITE priv->mtd.write = file_bytewrite; #endif priv->mtd.ioctl = filemtd_ioctl; priv->mtd.name = "filemtd"; priv->offset = offset; priv->nblocks = nblocks; return &priv->mtd; } /**************************************************************************** * Name: blockmtd_teardown * * Description: * Teardown a previously created blockmtd device. * * Input Parameters: * dev - Pointer to the mtd driver instance. * ****************************************************************************/ void blockmtd_teardown(FAR struct mtd_dev_s *dev) { FAR struct file_dev_s *priv; /* Close the enclosed file */ priv = (FAR struct file_dev_s *) dev; file_close(&priv->mtdfile); #ifdef CONFIG_MTD_REGISTRATION /* Un-register the MTD with the procfs system if enabled */ mtd_unregister(&priv->mtd); #endif /* Free the memory */ kmm_free(priv); } /**************************************************************************** * Name: filemtd_initialize * * Description: * Create and initialize a FILE MTD device instance. * * Input Parameters: * path - Path name of the file backing the MTD device * ****************************************************************************/ FAR struct mtd_dev_s *filemtd_initialize(FAR const char *path, size_t offset, int16_t sectsize, int32_t erasesize) { size_t filelen; struct stat sb; int ret; /* Stat the file */ ret = nx_stat(path, &sb, 1); if (ret < 0) { ferr("ERROR: Failed to stat %s: %d\n", path, ret); return NULL; } filelen = sb.st_size; if (offset > filelen) { ferr("ERROR: Offset beyond end of file\n"); return NULL; } return blockmtd_initialize(path, offset, filelen - offset, sectsize, erasesize); } /**************************************************************************** * Name: filemtd_teardown * * Description: * Teardown a previously created filemtd device. * * Input Parameters: * dev - Pointer to the mtd driver instance. * ****************************************************************************/ void filemtd_teardown(FAR struct mtd_dev_s *dev) { blockmtd_teardown(dev); } /**************************************************************************** * Name: filemtd_isfilemtd * * Description: * Tests if the provided mtd is a filemtd or blockmtd device. * * Input Parameters: * mtd - Pointer to the mtd. * ****************************************************************************/ bool filemtd_isfilemtd(FAR struct mtd_dev_s *dev) { FAR struct file_dev_s *priv = (FAR struct file_dev_s *) dev; return (priv->mtd.erase == filemtd_erase); }