/**************************************************************************** * drivers/audio/wm8776.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wm8776.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ static void wm8776_writereg(FAR struct wm8776_dev_s *priv, uint8_t regaddr, uint16_t regval); static int wm8776_takesem(FAR sem_t *sem); static int wm8776_forcetake(FAR sem_t *sem); #define wm8776_givesem(s) nxsem_post(s) static int wm8776_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps); #else static int wm8776_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps); #endif static int wm8776_shutdown(FAR struct audio_lowerhalf_s *dev); static void wm8776_senddone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result); static void wm8776_returnbuffers(FAR struct wm8776_dev_s *priv); static int wm8776_sendbuffer(FAR struct wm8776_dev_s *priv); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_start(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8776_start(FAR struct audio_lowerhalf_s *dev); #endif #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8776_stop(FAR struct audio_lowerhalf_s *dev); #endif #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session); static int wm8776_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8776_pause(FAR struct audio_lowerhalf_s *dev); static int wm8776_resume(FAR struct audio_lowerhalf_s *dev); #endif #endif static int wm8776_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int wm8776_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int wm8776_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session); #else static int wm8776_reserve(FAR struct audio_lowerhalf_s *dev); #endif #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_release(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8776_release(FAR struct audio_lowerhalf_s *dev); #endif static void *wm8776_workerthread(pthread_addr_t pvarg); /* Initialization */ static void wm8776_audio_output(FAR struct wm8776_dev_s *priv); #if 0 /* Not used */ static void wm8776_audio_input(FAR struct wm8776_dev_s *priv); #endif static void wm8776_hw_reset(FAR struct wm8776_dev_s *priv); /**************************************************************************** * Private Data ****************************************************************************/ static const struct audio_ops_s g_audioops = { wm8776_getcaps, /* getcaps */ wm8776_configure, /* configure */ wm8776_shutdown, /* shutdown */ wm8776_start, /* start */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP wm8776_stop, /* stop */ #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME wm8776_pause, /* pause */ wm8776_resume, /* resume */ #endif NULL, /* allocbuffer */ NULL, /* freebuffer */ wm8776_enqueuebuffer, /* enqueue_buffer */ wm8776_cancelbuffer, /* cancel_buffer */ wm8776_ioctl, /* ioctl */ NULL, /* read */ NULL, /* write */ wm8776_reserve, /* reserve */ wm8776_release /* release */ }; /**************************************************************************** * Name: wm8776_writereg * * Description: * Write the specified 16-bit register to the WM8776 device. * ****************************************************************************/ static void wm8776_writereg(FAR struct wm8776_dev_s *priv, uint8_t regaddr, uint16_t regval) { struct i2c_config_s config; uint8_t data[2]; int ret; /* Setup up the I2C configuration */ config.frequency = priv->lower->frequency; config.address = priv->lower->address; config.addrlen = 7; /* Set up the data to write */ data[0] = (regaddr << 1) + ((regval >> 8) & 0x1); data[1] = (regval & 0xff); ret = i2c_write(priv->i2c, &config, data, sizeof(data)); if (ret < 0) { auderr("ERROR: I2C_TRANSFER failed: %d\n", ret); } } /**************************************************************************** * Name: wm8776_takesem * * Description: * Take a semaphore count, handling the nasty EINTR return if we are * interrupted by a signal. * ****************************************************************************/ static int wm8776_takesem(sem_t *sem) { return nxsem_wait_uninterruptible(sem); } /**************************************************************************** * Name: wm8776_forcetake * * Description: * This is just another wrapper but this one continues even if the thread * is canceled. This must be done in certain conditions where were must * continue in order to clean-up resources. * ****************************************************************************/ static int wm8776_forcetake(FAR sem_t *sem) { int result; int ret = OK; do { result = nxsem_wait_uninterruptible(sem); /* The only expected error would -ECANCELED meaning that the * parent thread has been canceled. We have to continue and * terminate the poll in this case. */ DEBUGASSERT(result == OK || result == -ECANCELED); if (ret == OK && result < 0) { /* Remember the first failure */ ret = result; } } while (result < 0); return ret; } /**************************************************************************** * Name: wm8776_setvolume * * Description: * Set the right and left volume values in the WM8776 device based on the * current volume and balance settings. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static void wm8776_setvolume(FAR struct wm8776_dev_s *priv, uint16_t volume, bool mute) { uint16_t regval; uint16_t tmp_vol; /* TODO: balance */ if (mute) { tmp_vol = 0; } else { tmp_vol = volume; } /* limit the max vol */ if (tmp_vol > 0x69) { tmp_vol = 0x69; /* -10db */ } regval = WM8776_UPDATE | WM8776_HPOUT_VOL(tmp_vol); wm8776_writereg(priv, WM8776_MASTER_ATT, regval); audinfo("volume=%d mute=%d tmp_vol=%d (regval=0x%x) \n", volume, mute, tmp_vol, regval); /* Remember the volume level and mute settings */ priv->volume = volume; priv->mute = mute; } #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ /**************************************************************************** * Name: wm8776_getcaps * * Description: * Get the audio device capabilities * ****************************************************************************/ static int wm8776_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps) { /* Validate the structure */ DEBUGASSERT(caps && caps->ac_len >= sizeof(struct audio_caps_s)); audinfo("type=%d ac_type=%d\n", type, caps->ac_type); /* Fill in the caller's structure based on requested info */ caps->ac_format.hw = 0; caps->ac_controls.w = 0; switch (caps->ac_type) { /* Caller is querying for the types of units we support */ case AUDIO_TYPE_QUERY: /* Provide our overall capabilities. The interfacing software * must then call us back for specific info for each capability. */ caps->ac_channels = 2; /* Stereo output */ switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* We don't decode any formats! Only something above us in * the audio stream can perform decoding on our behalf. */ /* The types of audio units we implement */ caps->ac_controls.b[0] = AUDIO_TYPE_OUTPUT | AUDIO_TYPE_FEATURE | AUDIO_TYPE_PROCESSING; break; default: caps->ac_controls.b[0] = AUDIO_SUBFMT_END; break; } break; /* Provide capabilities of our OUTPUT unit */ case AUDIO_TYPE_OUTPUT: caps->ac_channels = 2; switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* Report the Sample rates we support */ caps->ac_controls.b[0] = AUDIO_SAMP_RATE_44K; break; case AUDIO_FMT_MP3: case AUDIO_FMT_WMA: case AUDIO_FMT_PCM: default: break; } break; /* All others we don't support */ default: /* Zero out the fields to indicate no support */ caps->ac_subtype = 0; caps->ac_channels = 0; break; } /* Return the length of the audio_caps_s struct for validation of * proper Audio device type. */ return caps->ac_len; } /**************************************************************************** * Name: wm8776_configure * * Description: * Configure the audio device for the specified mode of operation. * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps) #else static int wm8776_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; int ret = OK; DEBUGASSERT(priv != NULL && caps != NULL); audinfo("ac_type: %d\n", caps->ac_type); /* Process the configure operation */ switch (caps->ac_type) { case AUDIO_TYPE_FEATURE: audinfo(" AUDIO_TYPE_FEATURE\n"); /* Process based on Feature Unit */ switch (caps->ac_format.hw) { #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME case AUDIO_FU_VOLUME: { /* Set the volume */ uint16_t volume = caps->ac_controls.hw[0]; audinfo(" Volume: %d\n", volume); if (volume >= 0 && volume <= 1000) { /* Scale the volume setting to the range {0x2f .. 0x79} */ wm8776_setvolume(priv, (0x4a * volume / 1000) + 0x2f, priv->mute); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ default: auderr(" ERROR: Unrecognized feature unit\n"); ret = -ENOTTY; break; } break; case AUDIO_TYPE_OUTPUT: { audinfo(" AUDIO_TYPE_OUTPUT:\n"); audinfo(" Number of channels: %u\n", caps->ac_channels); audinfo(" Sample rate: %u\n", caps->ac_controls.hw[0]); audinfo(" Sample width: %u\n", caps->ac_controls.b[2]); /* Verify that all of the requested values are supported */ ret = -ERANGE; if (caps->ac_channels != 1 && caps->ac_channels != 2) { auderr("ERROR: Unsupported number of channels: %d\n", caps->ac_channels); break; } if (caps->ac_controls.b[2] != 8 && caps->ac_controls.b[2] != 16) { auderr("ERROR: Unsupported bits per sample: %d\n", caps->ac_controls.b[2]); break; } /* Save the current stream configuration */ priv->samprate = caps->ac_controls.hw[0]; priv->nchannels = caps->ac_channels; priv->bpsamp = caps->ac_controls.b[2]; /* TODO : channels, bits per sample, bitrate */ ret = OK; } break; case AUDIO_TYPE_PROCESSING: break; } return ret; } /**************************************************************************** * Name: wm8776_shutdown * * Description: * Shutdown the WM8776 chip and put it in the lowest power state possible. * ****************************************************************************/ static int wm8776_shutdown(FAR struct audio_lowerhalf_s *dev) { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; DEBUGASSERT(priv); /* Now issue a software reset. This puts all WM8776 registers back in * their default state. */ wm8776_hw_reset(priv); return OK; } /**************************************************************************** * Name: wm8776_senddone * * Description: * This is the I2S callback function that is invoked when the transfer * completes. * ****************************************************************************/ static void wm8776_senddone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result) { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)arg; struct audio_msg_s msg; irqstate_t flags; int ret; DEBUGASSERT(i2s && priv && priv->running && apb); audinfo("apb=%p inflight=%d result=%d\n", apb, priv->inflight, result); /* We do not place any restriction on the context in which this function * is called. It may be called from an interrupt handler. Therefore, the * doneq and in-flight values might be accessed from the interrupt level. * Not the best design. But we will use interrupt controls to protect * against that possibility. */ flags = spin_lock_irqsave(NULL); /* Add the completed buffer to the end of our doneq. We do not yet * decrement the reference count. */ dq_addlast((FAR dq_entry_t *)apb, &priv->doneq); /* And decrement the number of buffers in-flight */ DEBUGASSERT(priv->inflight > 0); priv->inflight--; /* Save the result of the transfer */ /* REVISIT: This can be overwritten */ priv->result = result; spin_unlock_irqrestore(NULL, flags); /* Now send a message to the worker thread, informing it that there are * buffers in the done queue that need to be cleaned up. */ msg.msg_id = AUDIO_MSG_COMPLETE; ret = file_mq_send(&priv->mq, (FAR const char *)&msg, sizeof(msg), CONFIG_WM8776_MSG_PRIO); if (ret < 0) { auderr("ERROR: file_mq_send failed: %d\n", ret); } } /**************************************************************************** * Name: wm8776_returnbuffers * * Description: * This function is called after the complete of one or more data * transfers. This function will empty the done queue and release our * reference to each buffer. * ****************************************************************************/ static void wm8776_returnbuffers(FAR struct wm8776_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; /* The doneq and in-flight values might be accessed from the interrupt * level in some implementations. Not the best design. But we will * use interrupt controls to protect against that possibility. */ flags = spin_lock_irqsave(NULL); while (dq_peek(&priv->doneq) != NULL) { /* Take the next buffer from the queue of completed transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->doneq); spin_unlock_irqrestore(NULL, flags); audinfo("Returning: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); /* Are we returning the final buffer in the stream? */ if ((apb->flags & AUDIO_APB_FINAL) != 0) { /* Both the pending and the done queues should be empty and there * should be no buffers in-flight. */ DEBUGASSERT(dq_empty(&priv->doneq) && dq_empty(&priv->pendq) && priv->inflight == 0); /* Set the terminating flag. This will, eventually, cause the * worker thread to exit (if it is not already terminating). */ audinfo("Terminating\n"); priv->terminating = true; } /* Release our reference to the audio buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif flags = spin_lock_irqsave(NULL); } spin_unlock_irqrestore(NULL, flags); } /**************************************************************************** * Name: wm8776_sendbuffer * * Description: * Start the transfer an audio buffer to the WM8776 via I2S. This * will not wait for the transfer to complete but will return immediately. * the wmd8776_senddone called will be invoked when the transfer * completes, stimulating the worker thread to call this function again. * ****************************************************************************/ static int wm8776_sendbuffer(FAR struct wm8776_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; uint32_t timeout; int shift; int ret; /* Loop while there are audio buffers to be sent and we have few than * CONFIG_WM8776_INFLIGHT then "in-flight" * * The 'inflight' value might be modified from the interrupt level in some * implementations. We will use interrupt controls to protect against * that possibility. * * The 'pendq', on the other hand, is protected via a semaphore. Let's * hold the semaphore while we are busy here and disable the interrupts * only while accessing 'inflight'. */ ret = wm8776_takesem(&priv->pendsem); if (ret < 0) { return ret; } while (priv->inflight < CONFIG_WM8776_INFLIGHT && dq_peek(&priv->pendq) != NULL && !priv->paused) { /* Take next buffer from the queue of pending transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq); audinfo("Sending apb=%p, size=%d inflight=%d\n", apb, apb->nbytes, priv->inflight); /* Increment the number of buffers in-flight before sending in order * to avoid a possible race condition. */ flags = spin_lock_irqsave(NULL); priv->inflight++; spin_unlock_irqrestore(NULL, flags); shift = (priv->bpsamp == 8) ? 14 - 3 : 14 - 4; shift -= (priv->nchannels > 1) ? 1 : 0; timeout = MSEC2TICK(((uint32_t)(apb->nbytes - apb->curbyte) << shift) / (uint32_t)priv->samprate); ret = I2S_SEND(priv->i2s, apb, wm8776_senddone, priv, timeout); if (ret < 0) { auderr("ERROR: I2S_SEND failed: %d\n", ret); break; } } wm8776_givesem(&priv->pendsem); return ret; } /**************************************************************************** * Name: wm8776_start * * Description: * Start the configured operation (audio streaming, volume enabled, etc.). * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_start(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8776_start(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; struct sched_param sparam; struct mq_attr attr; pthread_attr_t tattr; FAR void *value; int ret; audinfo("Entry\n"); /* Exit reduced power modes of operation */ /* REVISIT */ /* Create a message queue for the worker thread */ snprintf(priv->mqname, sizeof(priv->mqname), "/tmp/%" PRIXPTR, (uintptr_t)priv); attr.mq_maxmsg = 16; attr.mq_msgsize = sizeof(struct audio_msg_s); attr.mq_curmsgs = 0; attr.mq_flags = 0; ret = file_mq_open(&priv->mq, priv->mqname, O_RDWR | O_CREAT, 0644, &attr); if (ret < 0) { /* Error creating message queue! */ auderr("ERROR: Couldn't allocate message queue\n"); return -ENOMEM; } /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { audinfo("Joining old thread\n"); pthread_join(priv->threadid, &value); } /* Start our thread for sending data to the device */ pthread_attr_init(&tattr); sparam.sched_priority = sched_get_priority_max(SCHED_FIFO) - 3; pthread_attr_setschedparam(&tattr, &sparam); pthread_attr_setstacksize(&tattr, CONFIG_WM8776_WORKER_STACKSIZE); audinfo("Starting worker thread\n"); ret = pthread_create(&priv->threadid, &tattr, wm8776_workerthread, (pthread_addr_t)priv); if (ret != OK) { auderr("ERROR: pthread_create failed: %d\n", ret); } else { pthread_setname_np(priv->threadid, "wm8776"); audinfo("Created worker thread\n"); } return ret; } /**************************************************************************** * Name: wm8776_stop * * Description: Stop the configured operation (audio streaming, volume * disabled, etc.). * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8776_stop(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; struct audio_msg_s term_msg; FAR void *value; /* Send a message to stop all audio streaming */ term_msg.msg_id = AUDIO_MSG_STOP; term_msg.u.data = 0; file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_WM8776_MSG_PRIO); /* Join the worker thread */ pthread_join(priv->threadid, &value); priv->threadid = 0; /* Enter into a reduced power usage mode */ /* REVISIT: */ return OK; } #endif /**************************************************************************** * Name: wm8776_pause * * Description: Pauses the playback. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8776_pause(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; if (priv->running && !priv->paused) { priv->paused = true; wm8776_setvolume(priv, priv->volume, true); } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: wm8776_resume * * Description: Resumes the playback. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8776_resume(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; if (priv->running && priv->paused) { priv->paused = false; wm8776_setvolume(priv, priv->volume, false); wm8776_sendbuffer(priv); } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: wm8776_enqueuebuffer * * Description: Enqueue an Audio Pipeline Buffer for playback/ processing. * ****************************************************************************/ static int wm8776_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; struct audio_msg_s term_msg; int ret; audinfo("Enqueueing: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); /* Take a reference on the new audio buffer */ apb_reference(apb); /* Add the new buffer to the tail of pending audio buffers */ ret = wm8776_takesem(&priv->pendsem); if (ret < 0) { return ret; } apb->flags |= AUDIO_APB_OUTPUT_ENQUEUED; dq_addlast(&apb->dq_entry, &priv->pendq); wm8776_givesem(&priv->pendsem); /* Send a message to the worker thread indicating that a new buffer has * been enqueued. If mq is NULL, then the playing has not yet started. * In that case we are just "priming the pump" and we don't need to send * any message. */ ret = OK; if (priv->mq.f_inode != NULL) { term_msg.msg_id = AUDIO_MSG_ENQUEUE; term_msg.u.data = 0; ret = file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_WM8776_MSG_PRIO); if (ret < 0) { auderr("ERROR: file_mq_send failed: %d\n", ret); } } return ret; } /**************************************************************************** * Name: wm8776_cancelbuffer * * Description: Called when an enqueued buffer is being cancelled. * ****************************************************************************/ static int wm8776_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { audinfo("apb=%p\n", apb); return OK; } /**************************************************************************** * Name: wm8776_ioctl * * Description: Perform a device ioctl * ****************************************************************************/ static int wm8776_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg) { int ret = OK; #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS FAR struct ap_buffer_info_s *bufinfo; #endif /* Deal with ioctls passed from the upper-half driver */ switch (cmd) { /* Check for AUDIOIOC_HWRESET ioctl. This ioctl is passed straight * through from the upper-half audio driver. */ case AUDIOIOC_HWRESET: { /* REVISIT: Should we completely re-initialize the chip? We * can't just issue a software reset; that would puts all WM8776 * registers back in their default state. */ audinfo("AUDIOIOC_HWRESET:\n"); } break; /* Report our preferred buffer size and quantity */ #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS case AUDIOIOC_GETBUFFERINFO: { audinfo("AUDIOIOC_GETBUFFERINFO:\n"); bufinfo = (FAR struct ap_buffer_info_s *) arg; bufinfo->buffer_size = CONFIG_WM8776_BUFFER_SIZE; bufinfo->nbuffers = CONFIG_WM8776_NUM_BUFFERS; } break; #endif default: ret = -ENOTTY; audinfo("Ignored\n"); break; } return ret; } /**************************************************************************** * Name: wm8776_reserve * * Description: Reserves a session (the only one we have). * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session) #else static int wm8776_reserve(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *) dev; int ret = OK; /* Borrow the APBQ semaphore for thread sync */ ret = wm8776_takesem(&priv->pendsem); if (ret < 0) { return ret; } if (priv->reserved) { ret = -EBUSY; } else { /* Initialize the session context */ #ifdef CONFIG_AUDIO_MULTI_SESSION *session = NULL; #endif priv->inflight = 0; priv->running = false; priv->paused = false; #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif priv->reserved = true; } wm8776_givesem(&priv->pendsem); return ret; } /**************************************************************************** * Name: wm8776_release * * Description: Releases the session (the only one we have). * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8776_release(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8776_release(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8776_dev_s *priv = (FAR struct wm8776_dev_s *)dev; FAR void *value; int ret; /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { pthread_join(priv->threadid, &value); priv->threadid = 0; } /* Borrow the APBQ semaphore for thread sync */ ret = wm8776_forcetake(&priv->pendsem); /* Really we should free any queued buffers here */ priv->reserved = false; wm8776_givesem(&priv->pendsem); return ret; } /**************************************************************************** * Name: wm8776_audio_output * * Description: * Initialize and configure the WM8776 device as an audio output device. * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None. No failures are detected. * ****************************************************************************/ static void wm8776_audio_output(FAR struct wm8776_dev_s *priv) { wm8776_writereg(priv, WM8776_MASTER_ATT, WM8776_UPDATE | 0x58); /* -33db */ wm8776_writereg(priv, WM8776_DAC_IF, 0x32); /* 32bit, I2S, standard pol */ #ifdef CONFIG_WM8776_SWAP_HPOUT wm8776_writereg(priv, WM8776_DAC_CC, 0x62); /* Swap HPOUT L/R */ #endif wm8776_writereg(priv, WM8776_MASTER_MODE, 0x00); /* slave mode, 128fs */ wm8776_writereg(priv, WM8776_PWR_DOWN, 0x12); /* AINPD, ADCPD */ } /**************************************************************************** * Name: wm8776_hw_reset * * Description: * Reset and re-initialize the WM8776 * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None * ****************************************************************************/ static void wm8776_hw_reset(FAR struct wm8776_dev_s *priv) { /* Put audio output back to its initial configuration */ priv->samprate = WM8776_DEFAULT_SAMPRATE; priv->nchannels = WM8776_DEFAULT_NCHANNELS; priv->bpsamp = WM8776_DEFAULT_BPSAMP; #if !defined(CONFIG_AUDIO_EXCLUDE_VOLUME) && !defined(CONFIG_AUDIO_EXCLUDE_BALANCE) priv->balance = b16HALF; /* Center balance */ #endif /* Software reset. This puts all WM8776 registers back in their * default state. */ wm8776_writereg(priv, WM8776_SOFT_RESET, 0x00); /* Configure the WM8776 hardware as an audio input device */ wm8776_audio_output(priv); } /**************************************************************************** * Name: wm8776_workerthread * * This is the thread that feeds data to the chip and keeps the audio * stream going. * ****************************************************************************/ static void *wm8776_workerthread(pthread_addr_t pvarg) { FAR struct wm8776_dev_s *priv = (struct wm8776_dev_s *) pvarg; struct audio_msg_s msg; FAR struct ap_buffer_s *apb; int msglen; unsigned int prio; struct mq_attr attr; audinfo("Entry\n"); #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif priv->running = true; wm8776_setvolume(priv, priv->volume, false); /* Loop as long as we are supposed to be running and as long as we have * buffers in-flight. */ while (priv->running || priv->inflight > 0) { /* Check if we have been asked to terminate. We have to check if we * still have buffers in-flight. If we do, then we can't stop until * birds come back to roost. */ if (priv->terminating && priv->inflight <= 0) { /* We are IDLE. Break out of the loop and exit. */ break; } else { /* Check if we can send more audio buffers to the WM8776 */ wm8776_sendbuffer(priv); } repeat: /* Wait for messages from our message queue */ msglen = file_mq_receive(&priv->mq, (FAR char *)&msg, sizeof(msg), &prio); /* Handle the case when we return with no message */ if (msglen < sizeof(struct audio_msg_s)) { auderr("ERROR: Message too small: %d\n", msglen); continue; } /* Process the message */ switch (msg.msg_id) { /* The ISR has requested more data. We will catch this case at * the top of the loop. */ case AUDIO_MSG_DATA_REQUEST: audinfo("AUDIO_MSG_DATA_REQUEST\n"); break; /* Stop the playback */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP case AUDIO_MSG_STOP: /* Indicate that we are terminating */ audinfo("AUDIO_MSG_STOP: Terminating\n"); priv->terminating = true; break; #endif /* We have a new buffer to send. We will catch this case at * the top of the loop. */ case AUDIO_MSG_ENQUEUE: audinfo("AUDIO_MSG_ENQUEUE\n"); break; /* We will wake up from the I2S callback with this message */ case AUDIO_MSG_COMPLETE: audinfo("AUDIO_MSG_COMPLETE\n"); wm8776_returnbuffers(priv); break; default: auderr("ERROR: Ignoring message ID %d\n", msg.msg_id); break; } file_mq_getattr(&priv->mq, &attr); /* If there is a message in the queue, process it */ if (0 < attr.mq_curmsgs) { goto repeat; } } /* Reset the WM8776 hardware */ wm8776_hw_reset(priv); /* Return any pending buffers in our pending queue */ wm8776_forcetake(&priv->pendsem); while ((apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq)) != NULL) { /* Release our reference to the buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif } wm8776_givesem(&priv->pendsem); /* Return any pending buffers in our done queue */ wm8776_returnbuffers(priv); /* Close the message queue */ file_mq_close(&priv->mq); file_mq_unlink(priv->mqname); /* Send an AUDIO_MSG_COMPLETE message to the client */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK); #endif audinfo("Exit\n"); return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: wm8776_initialize * * Description: * Initialize the WM8776 device. * * Input Parameters: * i2c - An I2C driver instance * i2s - An I2S driver instance * lower - Persistent board configuration data * * Returned Value: * A new lower half audio interface for the WM8776 device is returned on * success; NULL is returned on failure. * ****************************************************************************/ FAR struct audio_lowerhalf_s * wm8776_initialize(FAR struct i2c_master_s *i2c, FAR struct i2s_dev_s *i2s, FAR const struct wm8776_lower_s *lower) { FAR struct wm8776_dev_s *priv; /* Sanity check */ DEBUGASSERT(i2c && i2s && lower); /* Allocate a WM8776 device structure */ priv = (FAR struct wm8776_dev_s *)kmm_zalloc(sizeof(struct wm8776_dev_s)); if (priv) { priv->dev.ops = &g_audioops; priv->lower = lower; priv->i2c = i2c; priv->i2s = i2s; nxsem_init(&priv->pendsem, 0, 1); dq_init(&priv->pendq); dq_init(&priv->doneq); /* Reset and reconfigure the WM8776 hardwaqre */ wm8776_hw_reset(priv); return &priv->dev; } return NULL; }