/**************************************************************************** * fs/nxffs/nxffs.h * * Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * References: Linux/Documentation/filesystems/romfs.txt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __FS_NXFFS_NXFFS_H #define __FS_NXFFS_NXFFS_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* NXFFS Definitions ********************************************************/ /* General NXFFS organization. The following example assumes 4 logical * blocks per FLASH erase block. The actual relationship is determined by * the FLASH geometry reported by the MTD driver. * * ERASE LOGICAL Inodes begin with a inode header. inode may * BLOCK BLOCK CONTENTS be marked as "deleted," pending re-packing. * n 4*n --+--------------+ * |BBBBBBBBBBBBBB| Logic block header * |IIIIIIIIIIIIII| Inodes begin with a inode header * |DDDDDDDDDDDDDD| Data block containing inode data block * | (Inode Data) | * 4*n+1 --+--------------+ * |BBBBBBBBBBBBBB| Logic block header * |DDDDDDDDDDDDDD| Inodes may consist of multiple data blocks * | (Inode Data) | * |IIIIIIIIIIIIII| Next inode header * | | Possibly a few unused bytes at the end of a block * 4*n+2 --+--------------+ * |BBBBBBBBBBBBBB| Logic block header * |DDDDDDDDDDDDDD| * | (Inode Data) | * 4*n+3 --+--------------+ * |BBBBBBBBBBBBBB| Logic block header * |IIIIIIIIIIIIII| Next inode header * |DDDDDDDDDDDDDD| * | (Inode Data) | * n+1 4*(n+1) --+--------------+ * |BBBBBBBBBBBBBB| Logic block header * | | All FLASH is unused after the end of the final * | | inode. * --+--------------+ * * General operation: * Inodes are written starting at the beginning of FLASH. As inodes are * deleted, they are marked as deleted but not removed. As new inodes are * written, allocations proceed to toward the end of the FLASH -- thus, * supporting wear leveling by using all FLASH blocks equally. * * When the FLASH becomes full (no more space at the end of the FLASH), a * re-packing operation must be performed: All inodes marked deleted are * finally removed and the remaining inodes are packed at the beginning of * the FLASH. Allocations then continue at the freed FLASH memory at the * end of the FLASH. * * BLOCK HEADER: * The block header is used to determine if the block has every been * formatted and also indicates bad blocks which should never be used. * * INODE HEADER: * Each inode begins with an inode header that contains, among other things, * the name of the inode, the offset to the first data block, and the * length of the inode data. * * At present, the only kind of inode support is a file. So for now, the * term file and inode are interchangeable. * * INODE DATA HEADER: * Inode data is enclosed in a data header. For a given inode, there * is at most one inode data block per logical block. If the inode data * spans more than one logical block, then the inode data may be enclosed * in multiple data blocks, one per logical block. * * NXFFS Limitations: * 1. Since the files are contiguous in FLASH and since allocations always * proceed toward the end of the FLASH, there can only be one file opened * for writing at a time. Multiple files may be opened for reading. * 2. Files may not be increased in size after they have been closed. The * O_APPEND open flag is not supported. * 3. Files are always written sequential. Seeking within a file opened for * writing will not work. * 4. There are no directories, however, '/' may be used within a file name * string providing some illusion of directories. * 5. Files may be opened for reading or for writing, but not both: The O_RDWR * open flag is not supported. * 6. The re-packing process occurs only during a write when the free FLASH * memory at the end of the FLASH is exhausted. Thus, occasionally, file * writing may take a long time. * 7. Another limitation is that there can be only a single NXFFS volume * mounted at any time. This has to do with the fact that we bind to * an MTD driver (instead of a block driver) and bypass all of the normal * mount operations. */ /* Values for logical block state. Basically, there are only two, perhaps * three, states: * * BLOCK_STATE_GOOD - The block is not known to be bad. * BLOCK_STATE_BAD - An error was found on the block and it is marked bad. * Other values - The block is bad and has an invalid state. * * Care is taken so that the GOOD to BAD transition only involves burning * bits from the erased to non-erased state. */ #define BLOCK_STATE_GOOD (CONFIG_NXFFS_ERASEDSTATE ^ 0x44) #define BLOCK_STATE_BAD (CONFIG_NXFFS_ERASEDSTATE ^ 0x55) /* Values for NXFFS inode state. Similar there are 2 (maybe 3) inode states: * * INODE_STATE_FILE - The inode is a valid usuable, file * INODE_STATE_DELETED - The inode has been deleted. * Other values - The inode is bad and has an invalid state. * * Care is taken so that the VALID to DELETED transition only involves burning * bits from the erased to non-erased state. */ #define INODE_STATE_FILE (CONFIG_NXFFS_ERASEDSTATE ^ 0x22) #define INODE_STATE_DELETED (CONFIG_NXFFS_ERASEDSTATE ^ 0xaa) /* Number of bytes in an the NXFFS magic sequences */ #define NXFFS_MAGICSIZE 4 /* When we allocate FLASH for a new inode data block, we will require that * space is available to hold this minimum number of data bytes in addition * to the size of the data block headeer. */ #define NXFFS_MINDATA 16 /* Internal definitions *****************************************************/ /* If we encounter this number of erased bytes, we assume that all of the * flash beyond this point is erased. */ #define NXFFS_NERASED 128 /* Quasi-standard definitions */ #ifndef MIN # define MIN(a,b) (a < b ? a : b) #endif #ifndef MAX # define MAX(a,b) (a > b ? a : b) #endif /**************************************************************************** * Public Types ****************************************************************************/ /* This structure defines each packed block on the FLASH media */ struct nxffs_block_s { uint8_t magic[4]; /* 0-3: Magic number for valid block */ uint8_t state; /* 4: Block state: See BLOCK_STATE_* */ }; #define SIZEOF_NXFFS_BLOCK_HDR 5 /* This structure defines each packed NXFFS inode header on the FLASH media */ struct nxffs_inode_s { uint8_t magic[4]; /* 0-3: Magic number for valid inode */ uint8_t state; /* 4: Inode state: See INODE_STATE_* */ uint8_t namlen; /* 5: Length of the inode name */ uint8_t noffs[4]; /* 6-9: FLASH offset to the file name */ uint8_t doffs[4]; /* 10-13: FLASH offset to the first data block */ uint8_t utc[4]; /* 14-17: Creation time */ uint8_t crc[4]; /* 18-21: CRC32 */ uint8_t datlen[4]; /* 22-25: Length of data in bytes */ }; #define SIZEOF_NXFFS_INODE_HDR 26 /* This structure defines each packed NXFFS data header on the FLASH media */ struct nxffs_data_s { uint8_t magic[4]; /* 0-3: Magic number for valid data */ uint8_t crc[4]; /* 4-7: CRC32 */ uint8_t datlen[2]; /* 8-9: Length of data in bytes */ }; #define SIZEOF_NXFFS_DATA_HDR 10 /* This is an in-memory representation of the NXFFS inode as extracted from * FLASH and with additional state information. */ struct nxffs_entry_s { off_t hoffset; /* FLASH offset to the inode header */ off_t noffset; /* FLASH offset to the inode name */ off_t doffset; /* FLASH offset to the first data header */ FAR char *name; /* inode name */ uint32_t utc; /* Time stamp */ uint32_t datlen; /* Length of inode data */ }; /* This structure describes int in-memory representation of the data block */ struct nxffs_blkentry_s { off_t hoffset; /* Offset to the block data header */ uint16_t datlen; /* Length of data following the header */ uint16_t foffset; /* Offset to start of data */ }; /* This structure describes the state of one open file. This structure * is protected by the volume semaphore. */ struct nxffs_ofile_s { struct nxffs_ofile_s *flink; /* Supports a singly linked list */ int16_t crefs; /* Reference count */ mode_t oflags; /* Open mode */ struct nxffs_entry_s entry; /* Describes the NXFFS inode entry */ }; /* A file opened for writing require some additional information */ struct nxffs_wrfile_s { /* The following fields provide the common open file information. */ struct nxffs_ofile_s ofile; /* The following fields are required to support the write operation */ bool truncate; /* Delete a file of the same name */ uint16_t datlen; /* Number of bytes written in data block */ off_t doffset; /* FLASH offset to the current data header */ uint32_t crc; /* Accumulated data block CRC */ }; /* This structure represents the overall state of on NXFFS instance. */ struct nxffs_volume_s { FAR struct mtd_dev_s *mtd; /* Supports FLASH access */ sem_t exclsem; /* Used to assure thread-safe access */ sem_t wrsem; /* Enforces single writer restriction */ struct mtd_geometry_s geo; /* Device geometry */ uint8_t blkper; /* R/W blocks per erase block */ uint16_t iooffset; /* Next offset in read/write access (in ioblock) */ off_t inoffset; /* Offset to the first valid inode header */ off_t froffset; /* Offset to the first free byte */ off_t nblocks; /* Number of R/W blocks on volume */ off_t ioblock; /* Current block number being accessed */ off_t cblock; /* Starting block number in cache */ FAR struct nxffs_ofile_s *ofiles; /* A singly-linked list of open files */ FAR uint8_t *cache; /* On cached erase block for general I/O */ FAR uint8_t *pack; /* A full erase block to support packing */ }; /* This structure describes the state of the blocks on the NXFFS volume */ struct nxffs_blkstats_s { off_t nblocks; /* Total number of FLASH blocks */ off_t ngood; /* Number of good FLASH blocks found */ off_t nbad; /* Number of well-formatted FLASH blocks marked as bad */ off_t nunformat; /* Number of unformatted FLASH blocks */ off_t ncorrupt; /* Number of blocks with corrupted format info */ off_t nbadread; /* Number of blocks that could not be read */ }; /**************************************************************************** * Public Variables ****************************************************************************/ /* The magic number that appears that the beginning of each NXFFS (logical) * block */ extern const uint8_t g_blockmagic[NXFFS_MAGICSIZE]; /* The magic number that appears that the beginning of each NXFFS inode */ extern const uint8_t g_inodemagic[NXFFS_MAGICSIZE]; /* The magic number that appears that the beginning of each NXFFS inode * data block. */ extern const uint8_t g_datamagic[NXFFS_MAGICSIZE]; /* If CONFIG_NXFFS_PREALLOCATED is defined, then this is the single, pre- * allocated NXFFS volume instance. */ #ifdef CONFIG_NXFFS_PREALLOCATED extern struct nxffs_volume_s g_volume; #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: nxffs_limits * * Description: * Recalculate file system limits: (1) the FLASH offset to the first, * valid inode, and (2) the FLASH offset to the first, unused byte after * the last inode (invalid or not). * * The first, lower limit must be recalculated: (1) initially, (2) * whenever the first inode is deleted, or (3) whenever inode is moved * as part of the file system packing operation. * * The second, upper limit must be (1) incremented whenever new file * data is written, or (2) recalculated as part of the file system packing * operation. * * Input Parameters: * volume - Identifies the NXFFS volume * * Returned Value: * Zero on success. Otherwise, a negated error is returned indicating the * nature of the failure. * * Defined in nxffs_initialize.c * ****************************************************************************/ int nxffs_limits(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Name: nxffs_rdle16 * * Description: * Get a (possibly unaligned) 16-bit little endian value. * * Input Parameters: * val - A pointer to the first byte of the little endian value. * * Returned Values: * A uint16_t representing the whole 16-bit integer value * * Defined in nxffs_util.c * ****************************************************************************/ uint16_t nxffs_rdle16(FAR const uint8_t *val); /**************************************************************************** * Name: nxffs_wrle16 * * Description: * Put a (possibly unaligned) 16-bit little endian value. * * Input Parameters: * dest - A pointer to the first byte to save the little endian value. * val - The 16-bit value to be saved. * * Returned Values: * None * * Defined in nxffs_util.c * ****************************************************************************/ void nxffs_wrle16(uint8_t *dest, uint16_t val); /**************************************************************************** * Name: nxffs_rdle32 * * Description: * Get a (possibly unaligned) 32-bit little endian value. * * Input Parameters: * val - A pointer to the first byte of the little endian value. * * Returned Values: * A uint32_t representing the whole 32-bit integer value * * Defined in nxffs_util.c * ****************************************************************************/ uint32_t nxffs_rdle32(FAR const uint8_t *val); /**************************************************************************** * Name: nxffs_wrle32 * * Description: * Put a (possibly unaligned) 32-bit little endian value. * * Input Parameters: * dest - A pointer to the first byte to save the little endian value. * val - The 32-bit value to be saved. * * Returned Value: * None * * Defined in nxffs_util.c * ****************************************************************************/ void nxffs_wrle32(uint8_t *dest, uint32_t val); /**************************************************************************** * Name: nxffs_erased * * Description: * Check if a block of memory is in the erased state. * * Input Parameters: * buffer - Address of the start of the memory to check. * buflen - The number of bytes to check. * * Returned Values: * The number of erased bytes found at the beginning of the memory region. * * Defined in nxffs_util.c * ****************************************************************************/ size_t nxffs_erased(FAR const uint8_t *buffer, size_t buflen); /**************************************************************************** * Name: nxffs_rdcache * * Description: * Read one I/O block into the volume cache memory. * * Input Parameters: * volume - Describes the current volume * block - The first logical block to read * * Returned Value: * Negated errnos are returned only in the case of MTD reported failures. * Nothing in the volume data itself will generate errors. * * Defined in nxffs_cache.c * ****************************************************************************/ int nxffs_rdcache(FAR struct nxffs_volume_s *volume, off_t block); /**************************************************************************** * Name: nxffs_wrcache * * Description: * Write one or more logical blocks from the volume cache memory. * * Input Parameters: * volume - Describes the current volume * * Returned Value: * Negated errnos are returned only in the case of MTD reported failures. * * Defined in nxffs_cache.c * ****************************************************************************/ int nxffs_wrcache(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Name: nxffs_ioseek * * Description: * Seek to a position in FLASH memory. This simply sets up the offsets * and pointer values. This is a necessary step prior to using * nxffs_getc(). * * Input Parameters: * volume - Describes the NXFFS volume * offset - The physical offset in bytes from the beginning of the FLASH * in bytes. * * Defined in nxffs_cache.c * ****************************************************************************/ void nxffs_ioseek(FAR struct nxffs_volume_s *volume, off_t offset); /**************************************************************************** * Name: nxffs_iotell * * Description: * Report the current position. * * Input Parameters: * volume - Describes the NXFFS volume * * Returned Value: * The offset from the beginning of FLASH to the current seek position. * * Defined in nxffs_cache.c * ****************************************************************************/ off_t nxffs_iotell(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Name: nxffs_getc * * Description: * Get the next byte from FLASH. This function allows the data in the * formatted FLASH blocks to be read as a continuous byte stream, skipping * over bad blocks and block headers as necessary. * * Input Parameters: * volume - Describes the NXFFS volume. The paramters ioblock and iooffset * in the volume structure determine the behavior of nxffs_getc(). * reserve - If less than this much space is available at the end of the * block, then skip to the next block. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno indicating the * nature of the failure. * * Defined in nxffs_cache.c * ****************************************************************************/ int nxffs_getc(FAR struct nxffs_volume_s *volume, uint16_t reserve); /**************************************************************************** * Name: nxffs_freeentry * * Description: * The inode values returned by nxffs_nextentry() include allocated memory * (specifically, the file name string). This function should be called * to dispose of that memory when the inode entry is no longer needed. * * Note that the nxffs_entry_s containing structure is not freed. The * caller may call kfree upon return of this function if necessary to * free the entry container. * * Input parameters: * entry - The entry to be freed. * * Returned Value: * None * * Defined in nxffs_inode.c * ****************************************************************************/ void nxffs_freeentry(FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_nextentry * * Description: * Search for the next valid inode starting at the provided FLASH offset. * * Input Parameters: * volume - Describes the NXFFS volume. * offset - The FLASH memory offset to begin searching. * entry - A pointer to memory provided by the caller in which to return * the inode description. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno is returned * that indicates the nature of the failure. * * Defined in nxffs_inode.c * ****************************************************************************/ int nxffs_nextentry(FAR struct nxffs_volume_s *volume, off_t offset, FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_findinode * * Description: * Search for an inode with the provided name starting with the first * valid inode and proceeding to the end FLASH or until the matching * inode is found. * * Input Parameters: * volume - Describes the NXFFS volume * name - The name of the inode to find * entry - The location to return information about the inode. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno is returned * that indicates the nature of the failure. * * Defined in nxffs_inode.c * ****************************************************************************/ int nxffs_findinode(FAR struct nxffs_volume_s *volume, FAR const char *name, FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_inodeend * * Description: * Return an *approximiate* FLASH offset to end of the inode data. The * returned value is guaranteed to be be less then or equal to the offset * of the thing-of-interest in FLASH. Parsing for interesting things * can begin at that point. * * Assumption: The inode header has been verified by the caller and is * known to contain valid data. * * Input Parameters: * volume - Describes the NXFFS volume * entry - Describes the inode. * * Returned Value: * A FLASH offset to the (approximate) end of the inode data. No errors * are detected. * * Defined in nxffs_inode.c * ****************************************************************************/ off_t nxffs_inodeend(FAR struct nxffs_volume_s *volume, FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_verifyblock * * Description: * Assure that the provided (logical) block number is in the block cache * and that it has a valid block header (i.e., proper magic and * marked good) * * Input Parameters: * volume - Describes the NXFFS volume * block - The (logical) block number to load and verify. * * Returned Values: * OK (zero( is returned on success. Otherwise, a negated errno value is * returned indicating the nature of the failure: * * -EIO is returned if we failed to read the block. If we are using * NAND memory, then this probably means that the block has * uncorrectable bit errors. * -ENOENT is returned if the block is a bad block. * * Defined in nxffs_block.c * ****************************************************************************/ int nxffs_verifyblock(FAR struct nxffs_volume_s *volume, off_t block); /**************************************************************************** * Name: nxffs_validblock * * Description: * Find the next valid (logical) block in the volume. * * Input Parameters: * volume - Describes the NXFFS volume * block - On entry, this provides the starting block number. If the * function is succesfful, then this memory location will hold the * block number of the next valid block on return. * * Returned Value: * Zero on success otherwise a negated errno value indicating the nature * of the failure. * * Defined in nxffs_block.c * ****************************************************************************/ int nxffs_validblock(struct nxffs_volume_s *volume, off_t *block); /**************************************************************************** * Name: nxffs_blockstats * * Description: * Analyze the NXFFS volume. This operation must be performed when the * volume is first mounted in order to detect if the volume has been * formatted and contains a usable NXFFS file system. * * Input Parameters: * volume - Describes the current NXFFS volume. * stats - On return, will hold nformation describing the state of the * volume. * * Returned Value: * Negated errnos are returned only in the case of MTD reported failures. * Nothing in the volume data itself will generate errors. * * Defined in nxffs_blockstats.c * ****************************************************************************/ int nxffs_blockstats(FAR struct nxffs_volume_s *volume, FAR struct nxffs_blkstats_s *stats); /**************************************************************************** * Name: nxffs_reformat * * Description: * Erase and reformat the entire volume. Verify each block and mark * improperly erased blocks as bad. * * Input Parameters: * volume - Describes the NXFFS volume to be reformatted. * * Returned Value: * Zero on success or a negated errno on a failure. Failures will be * returned n the case of MTD reported failures o. * Nothing in the volume data itself will generate errors. * * Defined in nxffs_reformat.c * ****************************************************************************/ int nxffs_reformat(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Name: nxffs_blkinit * * Description: * Initialize an NXFFS block to the erased state with the specified block * status. * * Input Parameters: * volume - Describes the NXFFS volume (needed for the blocksize). * blkptr - Pointer to the logic block to initialize. * state - Either BLOCK_STATE_GOOD or BLOCK_STATE_BAD. * * Returned Value: * None. * ****************************************************************************/ void nxffs_blkinit(FAR struct nxffs_volume_s *volume, FAR uint8_t *blkptr, uint8_t state); /**************************************************************************** * Name: nxffs_findofile * * Description: * Search the list of already opened files to see if the inode of this * name is one of the opened files. * * Input Parameters: * volume - Describes the NXFFS volume. * name - The name of the inode to check. * * Returned Value: * If an inode of this name is found in the list of opened inodes, then * a reference to the open file structure is returned. NULL is returned * otherwise. * * Defined in nxffs_open.c * ****************************************************************************/ FAR struct nxffs_ofile_s *nxffs_findofile(FAR struct nxffs_volume_s *volume, FAR const char *name); /**************************************************************************** * Name: nxffs_findwriter * * Description: * Search the list of already opened files and return the open file * instance for the write. * * Input Parameters: * volume - Describes the NXFFS volume. * * Returned Value: * If there is an active writer of the volume, its open file instance is * returned. NULL is returned otherwise. * * Defined in nxffs_open.c * ****************************************************************************/ FAR struct nxffs_wrfile_s *nxffs_findwriter(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Name: nxffs_wrinode * * Description: * Write the inode header (only to FLASH. This is done in two contexts: * * 1. When an inode is closed, or * 2. As part of the file system packing logic when an inode is moved. * * Note that in either case, the inode name has already been written to * FLASH. * * Input parameters * volume - Describes the NXFFS volume * entry - Describes the inode header to write * * Returned Value: * Zero is returned on success; Otherwise, a negated errno value is returned * indicating the nature of the failure. * * Defined in nxffs_open.c * ****************************************************************************/ int nxffs_wrinode(FAR struct nxffs_volume_s *volume, FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_updateinode * * Description: * The packing logic has moved an inode. Check if any open files are using * this inode and, if so, move the data in the open file structure as well. * * Input parameters * volume - Describes the NXFFS volume * entry - Describes the new inode entry * * Returned Value: * Zero is returned on success; Otherwise, a negated errno value is returned * indicating the nature of the failure. * ****************************************************************************/ int nxffs_updateinode(FAR struct nxffs_volume_s *volume, FAR struct nxffs_entry_s *entry); /**************************************************************************** * Name: nxffs_wrreserve * * Description: * Find a valid location for a file system object of 'size'. A valid * location will have these properties: * * 1. It will lie in the free flash region. * 2. It will have enough contiguous memory to hold the entire object * 3. The memory at this location will be fully erased. * * This function will only perform the checks of 1) and 2). The * end-of-filesystem offset, froffset, is update past this memory which, * in effect, reserves the memory. * * Input Parameters: * volume - Describes the NXFFS volume * size - The size of the object to be reserved. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is * returned indicating the nature of the failure. Of special interest * the return error of -ENOSPC which means that the FLASH volume is * full and should be repacked. * * On successful return the following are also valid: * * volume->ioblock - Read/write block number of the block containing the * candidate oject position * volume->iooffset - The offset in the block to the candidate object * position. * volume->froffset - Updated offset to the first free FLASH block after * the reserved memory. * * Defined in nxffs_write.c * ****************************************************************************/ int nxffs_wrreserve(FAR struct nxffs_volume_s *volume, size_t size); /**************************************************************************** * Name: nxffs_wrverify * * Description: * Find a valid location for the object. A valid location will have * these properties: * * 1. It will lie in the free flash region. * 2. It will have enough contiguous memory to hold the entire header * (excluding the file name which may lie in the next block). * 3. The memory at this location will be fully erased. * * This function will only perform the check 3). On entry it assumes the * following settings (left by nxffs_wrreserve()): * * volume->ioblock - Read/write block number of the block containing the * candidate oject position * volume->iooffset - The offset in the block to the candidate object * position. * * Input Parameters: * volume - Describes the NXFFS volume * size - The size of the object to be verifed. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is * returned indicating the nature of the failure. Of special interest * the return error of -ENOSPC which means that the FLASH volume is * full and should be repacked. * * On successful return the following are also valid: * * volume->ioblock - Read/write block number of the block containing the * verified object position * volume->iooffset - The offset in the block to the verified object * position. * volume->froffset - Updated offset to the first free FLASH block. * * Defined in nxffs_write.c * ****************************************************************************/ int nxffs_wrverify(FAR struct nxffs_volume_s *volume, size_t size); /**************************************************************************** * Name: nxffs_wrblkhdr * * Description: * Write the block header information. This is done (1) whenever the end- * block is encountered and (2) also when the file is closed in order to * flush the final block of data to FLASH. * * Input Parameters: * volume - Describes the state of the NXFFS volume * wrfile - Describes the state of the open file * * Returned Value: * Zero is returned on success; Otherwise, a negated errno value is * returned to indicate the nature of the failure. * * Defined in nxffs_write.c * ****************************************************************************/ int nxffs_wrblkhdr(FAR struct nxffs_volume_s *volume, FAR struct nxffs_wrfile_s *wrfile); /**************************************************************************** * Name: nxffs_nextblock * * Description: * Search for the next valid data block starting at the provided * FLASH offset. * * Input Parameters: * volume - Describes the NXFFS volume. * datlen - A memory location to return the data block length. * * Returned Value: * Zero is returned on success. Otherwise, a negated errno is returned * that indicates the nature of the failure. * * Defined in nxffs_read.c * ****************************************************************************/ int nxffs_nextblock(FAR struct nxffs_volume_s *volume, off_t offset, FAR struct nxffs_blkentry_s *blkentry); /**************************************************************************** * Name: nxffs_rdblkhdr * * Description: * Read and verify the data block header at the specified offset. * * Input Parameters: * volume - Describes the current volume. * offset - The byte offset from the beginning of FLASH where the data block * header is expected. * datlen - A memory location to return the data block length. * * Returned Value: * Zero on success. Otherwise, a negated errno value is returned * indicating the nature of the failure. * * Defined in nxffs_read.c * ****************************************************************************/ int nxffs_rdblkhdr(FAR struct nxffs_volume_s *volume, off_t offset, FAR uint16_t *datlen); /**************************************************************************** * Name: nxffs_rminode * * Description: * Remove an inode from FLASH. This is the internal implementation of * the file system unlinke operation. * * Input Parameters: * volume - Describes the NXFFS volume. * name - the name of the inode to be deleted. * * Returned Value: * Zero is returned if the inode is successfully deleted. Otherwise, a * negated errno value is returned indicating the nature of the failure. * ****************************************************************************/ int nxffs_rminode(FAR struct nxffs_volume_s *volume, FAR const char *name); /**************************************************************************** * Name: nxffs_pack * * Description: * Pack and re-write the filesystem in order to free up memory at the end * of FLASH. * * Input Parameters: * volume - The volume to be packed. * * Returned Values: * Zero on success; Otherwise, a negated errno value is returned to * indicate the nature of the failure. * ****************************************************************************/ int nxffs_pack(FAR struct nxffs_volume_s *volume); /**************************************************************************** * Standard mountpoint operation methods * * Description: * See include/nuttx/fs/fs.h * * - nxffs_open() and nxffs_close() are defined in nxffs_open.c * - nxffs_read() is defined in nxffs_read.c * - nxffs_write() is defined in nxffs_write.c * - nxffs_ioctl() is defined in nxffs_ioctl.c * - nxffs_dup() is defined in nxffs_open.c * - nxffs_opendir(), nxffs_readdir(), and nxffs_rewindir() are defined in * nxffs_dirent.c * - nxffs_bind() and nxffs_unbind() are defined in nxffs_initialize.c * - nxffs_stat() and nxffs_statfs() are defined in nxffs_stat.c * - nxffs_unlink() is defined nxffs_unlink.c * ****************************************************************************/ struct file; /* Forward references */ struct inode; struct fs_dirent_s; struct statfs; struct stat; int nxffs_open(FAR struct file *filep, FAR const char *relpath, int oflags, mode_t mode); int nxffs_close(FAR struct file *filep); ssize_t nxffs_read(FAR struct file *filep, FAR char *buffer, size_t buflen); ssize_t nxffs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); int nxffs_ioctl(FAR struct file *filep, int cmd, unsigned long arg); int nxffs_dup(FAR const struct file *oldp, FAR struct file *newp); int nxffs_opendir(FAR struct inode *mountpt, FAR const char *relpath, FAR struct fs_dirent_s *dir); int nxffs_readdir(FAR struct inode *mountpt, FAR struct fs_dirent_s *dir); int nxffs_rewinddir(FAR struct inode *mountpt, FAR struct fs_dirent_s *dir); int nxffs_bind(FAR struct inode *blkdriver, FAR const void *data, FAR void **handle); int nxffs_unbind(FAR void *handle, FAR struct inode **blkdriver); int nxffs_statfs(FAR struct inode *mountpt, FAR struct statfs *buf); int nxffs_stat(FAR struct inode *mountpt, FAR const char *relpath, FAR struct stat *buf); int nxffs_unlink(FAR struct inode *mountpt, FAR const char *relpath); #endif /* __FS_NXFFS_NXFFS_H */