/**************************************************************************** * drivers/wireless/spirit/include/spirit_aes.h * * Copyright(c) 2015 STMicroelectronics * Author: VMA division - AMS * Version 3.2.2 08-July-2015 * * Adapted for NuttX by: * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* Configuration and management of SPIRIT AES Engine. */ #ifndef __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_AES_H #define __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_AES_H /* In order to encrypt data, the user must manage the AES_END IRQ. The data * must be split in blocks of 16 bytes and written into the AES DATA IN * registers. Then, after the key is written into the AES KEY registers, a * command of Execute encryption has to be sent. * * Example: * * spirit_aes_write_datain(spirit, inbuffer , buflen); * spirit_aes_encrypt(spirit); * * Wait for encryption done (signalled via interrupt) * * spirit_aes_read_dataout(espirit, outbuffer , buflen); * * In order to decrypt data, the user must manage the AES_END IRQ and have a * decryption key. There are two operative modes to make the data * decryption: * * 1. Derive the decryption key from the encryption key and decrypt data * directly using the spirit_aes_derivekey_decrypt() function * * Example: * * spirit_aes_write_datain(spirit, inbuffer , buflen); * spirit_aes_derivekey_decrypt(spirit); * * Wait for key derivation to complete (signalled via interrupt) * * spirit_aes_read_dataout(spirit, outbuffer , buflen); * * 2 Derive the decryption key from the encryption key using the * spirit_aes_enc2deckey() function, store it into the AES KEY * registers and then decrypt data using the spirit_aes_decrypt() * function * * Example: * * spirit_aes_write_datain(spirit, keyenc, 16); * spirit_aes_enc2deckey(spirit); * * Wait for key derivation to complete (signalled via interrupt) * * spirit_aes_read_dataout(spirit, keydec, 16); * * spirit_aes_write_key(key_dec); * spirit_aes_write_datain(inbuffer , 16); * spirit_aes_decrypt(spirit); * * Wait for encryption done (signalled via interrupt) * * spirit_aes_read_dataout(spirit, outbuffer, buflen); */ /**************************************************************************** * Included Files ****************************************************************************/ #include "spirit_regs.h" #include "spirit_types.h" /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus extern "C" { #endif /**************************************************************************** * Name: spirit_aes_enable * * Description: * Enables or Disables the AES engine. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * newstate new state for AES engine. * This parameter can be: S_ENABLE or S_DISABLE. * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_enable(FAR struct spirit_library_s *spirit, enum spirit_functional_state_e newstate); /**************************************************************************** * Name: spirit_aes_write_datain * * Description: * Writes the data to encrypt or decrypt, or the encryption key for the * derive decryption key operation into the AES_DATA_IN registers. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * buffer - Pointer to the user data buffer. The first byte of the array * must be the MSB byte and it will be put in the AES_DATA_IN[0] * register, while the last one must be the LSB and it will be * put in the AES_DATA_IN[buflen-1] register. If data to write * are less than 16 bytes the remaining AES_DATA_IN registers * will be filled with bytes equal to 0. * buflen - Length of data in bytes. * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_write_datain(FAR struct spirit_library_s *spirit, FAR const uint8_t *buffer, uint8_t buflen); /**************************************************************************** * Name: spirit_aes_read_dataout * * Description: * Returns the encrypted or decrypted data or the description key from the * AES_DATA_OUT register. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * buffer - pointer to the user data buffer. The AES_DATA_OUT[0] * register value will be put as first element of the buffer * (MSB), while the AES_DAT_OUT[buflen-1] register value will be * put as last element of the buffer (LSB). * buflen - Length of data to read in bytes. * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_read_dataout(FAR struct spirit_library_s *spirit, FAR uint8_t *buffer, uint8_t buflen); /**************************************************************************** * Name: spirit_aes_write_key * * Description: * Writes the encryption key into the AES_KEY_IN register. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * key - Pointer to the buffer of 4 words containing the AES key. * The first byte of the buffer must be the most significant byte * AES_KEY_0 of the AES key. The last byte of the buffer must be * the less significant byte AES_KEY_15 of the AES key. * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_write_key(FAR struct spirit_library_s *spirit, FAR const uint8_t *key); /**************************************************************************** * Name: spirit_aes_read_key * * Description: * Returns the encryption/decryption key from the AES_KEY_IN register. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * key pointer to the buffer of 4 words (16 bytes) containing the AES key. * The first byte of the buffer shall be the most significant byte * AES_KEY_0 of the AES key. * The last byte of the buffer shall be the less significant byte * AES_KEY_15 of the AES key. * This parameter is an uint8_t*. * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_read_key(FAR struct spirit_library_s *spirit, FAR uint8_t *key); /**************************************************************************** * Name: spirit_aes_enc2deckey * * Description: * Derives the decryption key from a given encryption key. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_enc2deckey(FAR struct spirit_library_s *spirit); /**************************************************************************** * Name: spirit_aes_encrypt * * Description: * Executes the encryption operation. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_encrypt(FAR struct spirit_library_s *spirit); /**************************************************************************** * Name: spirit_aes_decrypt * * Description: * Executes the decryption operation. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_decrypt(FAR struct spirit_library_s *spirit); /**************************************************************************** * Name: spirit_aes_derivekey_decrypt * * Description: * Executes the key derivation and the decryption operation. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on any failure. * ****************************************************************************/ int spirit_aes_derivekey_decrypt(FAR struct spirit_library_s *spirit); #ifdef __cplusplus } #endif #endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_AES_H */