/**************************************************************************** * configs/ea3131/src/lpc31_fillpage.c * * Copyright (C) 2010, 2012-2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #ifdef CONFIG_PAGING #ifdef CONFIG_PAGING_BINPATH # include # include # include # include # include # ifdef CONFIG_EA3131_PAGING_SDSLOT # include # include # include # include # include "lpc31.h" # endif #endif #if defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) # include # include # include # include #endif /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* SD SLOT number might depend on the board configuration */ #ifdef CONFIG_ARCH_BOARD_EA3131 # define HAVE_SD 1 # define HAVE_SPINOR 1 # if defined(CONFIG_EA3131_PAGING_SDSLOT) && CONFIG_EA3131_PAGING_SDSLOT != 0 # error "Only one SD slot" # undef CONFIG_EA3131_PAGING_SDSLOT # endif #else /* Add configuration for new LPC31XX boards here */ # error "Unrecognized LPC31XX board" # undef CONFIG_EA3131_PAGING_SDSLOT # undef HAVE_SD # undef HAVE_SPINOR #endif /* Sanity check: We can only perform paging using a single source device */ #if defined(CONFIG_PAGING_M25PX) && defined(CONFIG_PAGING_AT45DB) # error "Both CONFIG_PAGING_M25PX and CONFIG_PAGING_AT45DB are defined" # undef CONFIG_PAGING_M25PX #endif #if defined(CONFIG_PAGING_BINPATH) && defined(CONFIG_PAGING_M25PX) # error "Both CONFIG_PAGING_BINPATH and CONFIG_PAGING_M25PX are defined" # undef CONFIG_PAGING_BINPATH #endif #if defined(CONFIG_PAGING_BINPATH) && defined(CONFIG_PAGING_AT45DB) # error "Both CONFIG_PAGING_BINPATH and CONFIG_PAGING_AT45DB are defined" # undef CONFIG_PAGING_BINPATH #endif /* Are we accessing the page source data through a file path? */ #ifdef CONFIG_PAGING_BINPATH /* Can't support SD if the board does not support SD (duh) */ # if defined(CONFIG_EA3131_PAGING_SDSLOT) && !defined(HAVE_SD) # error "This board does not support SD" # undef CONFIG_EA3131_PAGING_SDSLOT # endif /* Can't support SD if mountpoints are disabled or if SDIO support * is not enabled. */ # if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI) # ifdef CONFIG_EA3131_PAGING_SDSLOT # error "Mountpoints and/or MCI disabled" # endif # undef CONFIG_EA3131_PAGING_SDSLOT # undef HAVE_SD # endif /* A mountpoint for the FAT file system must be provided */ # if !defined(CONFIG_EA3131_PAGING_MOUNTPT) && defined(CONFIG_EA3131_PAGING_SDSLOT) # error "No CONFIG_EA3131_PAGING_MOUNTPT provided" # undef CONFIG_EA3131_PAGING_SDSLOT # undef HAVE_SD # endif /* If no minor number is provided, default to zero */ # ifndef CONFIG_EA3131_PAGING_MINOR # define CONFIG_EA3131_PAGING_MINOR 0 # endif #endif /* CONFIG_PAGING_BINPATH */ /* Are we accessing the page source data through the M25P* MTD device? */ #if defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) /* Verify that SPI support is enabld */ #ifndef CONFIG_LPC31_SPI # error "SPI support is not enabled" #endif /* Make sure that some value is defined for the offset into the FLASH * of the NuttX binary image. */ # ifndef CONFIG_EA3131_PAGING_BINOFFSET # define CONFIG_EA3131_PAGING_BINOFFSET 0 # endif /* Make sure that some value is defined for the SPI port number */ # ifndef CONFIG_EA3131_PAGING_SPIPORT # define CONFIG_EA3131_PAGING_SPIPORT 0 # endif #endif /**************************************************************************** * Private Types ****************************************************************************/ /* State structure needed to support paging from a file */ #ifdef CONFIG_PAGING_BINPATH struct pg_source_s { bool initialized; /* TRUE: we are initialized */ int fd; /* File descriptor of the nuttx.bin file */ }; #endif /* State structured needd to support paging through the M25P* MTD interface. */ #if defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) struct pg_source_s { /* If interrupts or DMA are used, then we will have to defer initialization */ bool initialized; /* TRUE: we are initialized */ /* This is the M25P* device state structure */ FAR struct mtd_dev_s *mtd; /* This the device geometry */ #ifdef CONFIG_DEBUG FAR struct mtd_geometry_s geo; #endif }; #endif /**************************************************************************** * Private Data ****************************************************************************/ #if defined(CONFIG_PAGING_BINPATH) || defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) static struct pg_source_s g_pgsrc; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lpc31_initsrc() * * Description: * Initialize the source device that will support paging. * If BINPATH is defined, then it is the full path to a file on a mounted file * system. In this case initialization will be deferred until the first * time that up_fillpage() is called. * ****************************************************************************/ #if defined(CONFIG_PAGING_BINPATH) static inline void lpc31_initsrc(void) { #ifdef CONFIG_EA3131_PAGING_SDSLOT FAR struct sdio_dev_s *sdio; int ret; #endif /* Are we already initialized? */ if (!g_pgsrc.initialized) { #ifdef CONFIG_EA3131_PAGING_SDSLOT char devname[16]; #endif pgllvdbg("Initializing %s\n", CONFIG_PAGING_BINPATH); /* No, do we need to mount an SD device? */ #ifdef CONFIG_EA3131_PAGING_SDSLOT /* Yes.. First, get an instance of the SDIO interface */ sdio = sdio_initialize(CONFIG_EA3131_PAGING_SDSLOT); DEBUGASSERT(sdio != NULL); /* Then bind the SDIO interface to the SD driver */ ret = mmcsd_slotinitialize(CONFIG_EA3131_PAGING_MINOR, sdio); DEBUGASSERT(ret == OK); /* Then let's guess and say that there is a card in the slot. * (We are basically jodido anyway if there is no card in the slot). */ sdio_mediachange(sdio, true); /* Now mount the file system */ snprintf(devname, 16, "/dev/mmcsd%d", CONFIG_EA3131_PAGING_MINOR); ret = mount(devname, CONFIG_EA3131_PAGING_MOUNTPT, "vfat", MS_RDONLY, NULL); DEBUGASSERT(ret == OK); #endif /* CONFIG_EA3131_PAGING_SDSLOT */ /* Open the selected path for read-only access */ g_pgsrc.fd = open(CONFIG_PAGING_BINPATH, O_RDONLY); DEBUGASSERT(g_pgsrc.fd >= 0); /* Then we are initialized */ g_pgsrc.initialized = true; } } #elif defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) static inline void lpc31_initsrc(void) { FAR struct spi_dev_s *spi; #ifdef CONFIG_DEBUG uint32_t capacity; int ret; #endif /* Are we already initialized? */ if (!g_pgsrc.initialized) { /* No... the initialize now */ pgllvdbg("Initializing\n"); /* First get an instance of the SPI device interface */ spi = lpc31_spibus_initialize(CONFIG_EA3131_PAGING_SPIPORT); DEBUGASSERT(spi != NULL); /* Then bind the SPI interface to the MTD driver */ #ifdef CONFIG_PAGING_M25PX g_pgsrc.mtd = m25p_initialize(spi); #else g_pgsrc.mtd = at45db_initialize(spi); #endif DEBUGASSERT(g_pgsrc.mtd != NULL); /* Verify that we can use the device */ #ifdef CONFIG_DEBUG /* Get the device geometry. (casting to uintptr_t first eliminates * complaints on some architectures where the sizeof long is different * from the size of a pointer). */ ret = MTD_IOCTL(g_pgsrc.mtd, MTDIOC_GEOMETRY, (unsigned long)&g_pgsrc.geo); DEBUGASSERT(ret >= 0); capacity = g_pgsrc.geo.erasesize*g_pgsrc.geo.neraseblocks; pgllvdbg("capacity: %d\n", capacity); DEBUGASSERT(capacity >= (CONFIG_EA3131_PAGING_BINOFFSET + PG_TEXT_VSIZE)); #endif /* We are now initialized */ g_pgsrc.initialized = true; } } #else # define lpc31_initsrc() #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: up_fillpage() * * Description: * After a page is allocated and mapped by up_allocpage(), the actual * filling of the page with data from the non-volatile, must be performed * by a separate call to the architecture-specific function, up_fillpage(). * This function is non-blocking, it will start an asynchronous page fill. * The common paging logic will provide a callback function, pg_callback, * that will be called when the page fill is finished (or an error occurs). * This callback is assumed to occur from an interrupt level when the * device driver completes the fill operation. * * NOTE 1: Allocating and filling a page is a two step process. up_allocpage() * allocates the page, and up_fillpage() fills it with data from some non- * volatile storage device. This distinction is made because up_allocpage() * can probably be implemented in board-independent logic whereas up_fillpage() * probably must be implemented as board-specific logic. * * NOTE 2: The initial mapping of vpage will be read-able, write-able, * but non-cacheable. No special actions will be required of * up_fillpage() in order to write into this allocated page. If the * virtual address maps to a text region, however, this function should * remap the region so that is is read/execute only. It should be made * cache-able in any case. * Input Parameters: * tcb - A reference to the task control block of the task that needs to * have a page fill. Architecture-specific logic can retrieve page * fault information from the architecture-specific context * information in this TCB to perform the fill. * pg_callbck - The function to be called when the page fill is complete. * * Returned Value: * This function will return zero (OK) if the page fill was successfully * started (the result of the page fill is passed to the callback function * as the result argument). A negated errno value may be returned if an * error occurs. All errors, however, are fatal. * * NOTE: -EBUSY has a special meaning. It is used internally to mean that * the callback function has not executed. Therefore, -EBUSY should * never be provided in the result argument of pg_callback. * * Assumptions: * - This function is called from the normal tasking context (but * interrupts siabled). The implementation must take whatever actions * are necessary to assure that the operation is safe within this context. * - Upon return, the caller will sleep waiting for the page fill callback * to occur. The callback function will perform the wakeup. * ****************************************************************************/ #ifdef CONFIG_PAGING_BLOCKINGFILL /* Version 1: Supports blocking fill operations */ int up_fillpage(FAR struct tcb_s *tcb, FAR void *vpage) { #if defined(CONFIG_PAGING_BINPATH) ssize_t nbytes; off_t offset; off_t pos; #elif defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) ssize_t nbytes; off_t offset; #endif pglldbg("TCB: %p vpage: %p far: %08x\n", tcb, vpage, tcb->xcp.far); DEBUGASSERT(tcb->xcp.far >= PG_PAGED_VBASE && tcb->xcp.far < PG_PAGED_VEND); /* If BINPATH is defined, then it is the full path to a file on a mounted file * system. In this case initialization will be deferred until the first * time that up_fillpage() is called. Are we initialized? */ #if defined(CONFIG_PAGING_BINPATH) /* Perform initialization of the paging source device (if necessary) */ lpc31_initsrc(); /* Create an offset into the binary image that corresponds to the * virtual address. File offset 0 corresponds to PG_LOCKED_VBASE. */ offset = (off_t)tcb->xcp.far - PG_LOCKED_VBASE; /* Seek to that position */ pos = lseek(g_pgsrc.fd, offset, SEEK_SET); DEBUGASSERT(pos != (off_t)-1); /* And read the page data from that offset */ nbytes = read(g_pgsrc.fd, vpage, PAGESIZE); DEBUGASSERT(nbytes == PAGESIZE); return OK; #elif defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) /* !CONFIG_PAGING_BINPATH */ /* Perform initialization of the paging source device (if necessary) */ lpc31_initsrc(); /* Create an offset into the binary image that corresponds to the * virtual address. File offset 0 corresponds to PG_LOCKED_VBASE. */ offset = (off_t)tcb->xcp.far - PG_LOCKED_VBASE + CONFIG_EA3131_PAGING_BINOFFSET; /* Read the page at the correct offset into the SPI FLASH device */ nbytes = MTD_READ(g_pgsrc.mtd, offset, PAGESIZE, (FAR uint8_t *)vpage); DEBUGASSERT(nbytes == PAGESIZE); return OK; #else /* !CONFIG_PAGING_BINPATH && !CONFIG_PAGING_M25PX && !CONFIG_PAGING_AT45DB */ # warning "Not implemented" return -ENOSYS; #endif /* !CONFIG_PAGING_BINPATH && !CONFIG_PAGING_M25PX && !CONFIG_PAGING_AT45DB */ } #else /* CONFIG_PAGING_BLOCKINGFILL */ /* Version 2: Supports non-blocking, asynchronous fill operations */ int up_fillpage(FAR struct tcb_s *tcb, FAR void *vpage, up_pgcallback_t pg_callback) { pglldbg("TCB: %p vpage: %d far: %08x\n", tcb, vpage, tcb->xcp.far); DEBUGASSERT(tcb->xcp.far >= PG_PAGED_VBASE && tcb->xcp.far < PG_PAGED_VEND); #if defined(CONFIG_PAGING_BINPATH) # error "File system-based paging must always be implemented with blocking calls" #elif defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) # error "SPI FLASH paging must always be implemented with blocking calls" #else # warning "Not implemented" #endif return -ENOSYS; } #endif /* CONFIG_PAGING_BLOCKINGFILL */ /************************************************************************************ * Name: lpc31_pginitialize * * Description: * Set up mass storage device to support on demand paging. * ************************************************************************************/ void weak_function lpc31_pginitialize(void) { /* This initialization does nothing in this example setup. But this function is * where you might, for example: * * - Initialize and configure a mass storage device to support on-demand paging. * This might be, perhaps an SD card or NAND memory. An SPI FLASH would probably * already have been configured by lpc31_spidev_intialize(void); * - Set up resources to support up_fillpage() operation. For example, perhaps the * the text image is stored in a named binary file. In this case, the virtual * text addresses might map to offsets into that file. * - Do whatever else is necessary to make up_fillpage() ready for the first time * that it is called. * * In reality, however, this function is not very useful: This function is called * from a low level (before os_start() is even called), it may not be possible to * perform file system operations or even to get debug output yet. Therefore, * to keep life simple, initialization will be deferred in all cases until the first * time that up_fillpage() is called. */ } #endif /* CONFIG_PAGING */