/**************************************************************************** * net/utils/utils.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __NET_UTILS_UTILS_H #define __NET_UTILS_UTILS_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include /**************************************************************************** * Public Types ****************************************************************************/ /* These values control the behavior of net_timeval2desc */ enum tv2ds_remainder_e { TV2DS_TRUNC = 0, /* Truncate microsecond remainder */ TV2DS_ROUND, /* Round to the nearest full decisecond */ TV2DS_CEIL /* Force to next larger full decisecond */ }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ struct net_driver_s; /* Forward reference */ struct timeval; /* Forward reference */ /**************************************************************************** * Name: net_breaklock * * Description: * Break the lock, return information needed to restore re-entrant lock * state. * ****************************************************************************/ int net_breaklock(FAR unsigned int *count); /**************************************************************************** * Name: net_restorelock * * Description: * Restore the locked state * * Returned Value: * Zero (OK) is returned on success; a negated errno value is returned on * failured (probably -ECANCELED). * ****************************************************************************/ int net_restorelock(unsigned int count); /**************************************************************************** * Name: net_dsec2timeval * * Description: * Convert a decisecond value to a struct timeval. Needed by getsockopt() * to report timeout values. * * Input Parameters: * dsec The decisecond value to convert * tv The struct timeval to receive the converted value * * Returned Value: * None * * Assumptions: * ****************************************************************************/ void net_dsec2timeval(uint16_t dsec, FAR struct timeval *tv); /**************************************************************************** * Name: net_dsec2tick * * Description: * Convert a decisecond value to a system clock ticks. Used by IGMP logic. * * Input Parameters: * dsec The decisecond value to convert * * Returned Value: * The decisecond value expressed as system clock ticks * ****************************************************************************/ unsigned int net_dsec2tick(int dsec); /**************************************************************************** * Name: net_timeval2dsec * * Description: * Convert a struct timeval to deciseconds. Needed by setsockopt() to * save new timeout values. * * Input Parameters: * tv - The struct timeval to convert * remainder - Determines how to handler the microsecond remainder * * Returned Value: * The converted value * * Assumptions: * ****************************************************************************/ unsigned int net_timeval2dsec(FAR struct timeval *tv, enum tv2ds_remainder_e remainder); /**************************************************************************** * Name: net_ipv6_mask2pref * * Description: * Convert a 128-bit netmask to a prefix length. The NuttX IPv6 * networking uses 128-bit network masks internally. This function * converts the IPv6 netmask to a prefix length. * * The prefix length is the number of MS '1' bits on in the netmask. * This, of course, assumes that all MS bits are '1' and all LS bits are * '0' with no intermixed 1's and 0's. This function searches from the MS * bit until the first '0' is found (this does not necessary mean that * there might not be additional '1' bits following the firs '0', but that * will be a malformed netmask. * * Input Parameters: * mask Points to an IPv6 netmask in the form of uint16_t[8] * * Returned Value: * The prefix length, range 0-128 on success; This function will not * fail. * ****************************************************************************/ #ifdef CONFIG_NET_IPv6 uint8_t net_ipv6_mask2pref(FAR const uint16_t *mask); #endif /**************************************************************************** * Name: net_ipv6_pref2mask * * Description: * Convert a IPv6 prefix length to a network mask. The prefix length * specifies the number of MS bits under mask (0-128) * * Input Parameters: * preflen - Determines the width of the netmask (in bits). Range 0-128 * mask - The location to return the netmask. * * Returned Value: * None * ****************************************************************************/ #ifdef CONFIG_NET_IPv6 void net_ipv6_pref2mask(uint8_t preflen, net_ipv6addr_t mask); #endif /**************************************************************************** * Name: net_chksum_adjust * * Description: * Adjusts the checksum of a packet without having to completely * recalculate it, as described in RFC 3022, Section 4.2, Page 9. * * Input Parameters: * chksum - points to the chksum in the packet * optr - points to the old data in the packet * olen - length of old data * nptr - points to the new data in the packet * nlen - length of new data * * Limitations: * The algorithm is applicable only for even offsets and even lengths. * ****************************************************************************/ void net_chksum_adjust(FAR uint16_t *chksum, FAR const uint16_t *optr, ssize_t olen, FAR const uint16_t *nptr, ssize_t nlen); /**************************************************************************** * Name: tcp_chksum, tcp_ipv4_chksum, and tcp_ipv6_chksum * * Description: * Calculate the TCP checksum of the packet in d_buf and d_appdata. * * The TCP checksum is the Internet checksum of data contents of the * TCP segment, and a pseudo-header as defined in RFC793. * * Note: The d_appdata pointer that points to the packet data may * point anywhere in memory, so it is not possible to simply calculate * the Internet checksum of the contents of the d_buf buffer. * * Returned Value: * The TCP checksum of the TCP segment in d_buf and pointed to by * d_appdata. * ****************************************************************************/ #ifdef CONFIG_NET_IPv4 uint16_t tcp_ipv4_chksum(FAR struct net_driver_s *dev); #endif #ifdef CONFIG_NET_IPv6 uint16_t tcp_ipv6_chksum(FAR struct net_driver_s *dev); #endif #if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6) uint16_t tcp_chksum(FAR struct net_driver_s *dev); #elif defined(CONFIG_NET_IPv4) # define tcp_chksum(d) tcp_ipv4_chksum(d) #else /* if defined(CONFIG_NET_IPv6) */ # define tcp_chksum(d) tcp_ipv6_chksum(d) #endif /**************************************************************************** * Name: udp_ipv4_chksum * * Description: * Calculate the UDP/IPv4 checksum of the packet in d_buf and d_appdata. * ****************************************************************************/ #if defined(CONFIG_NET_UDP_CHECKSUMS) && defined(CONFIG_NET_IPv4) uint16_t udp_ipv4_chksum(FAR struct net_driver_s *dev); #endif /**************************************************************************** * Name: udp_ipv6_chksum * * Description: * Calculate the UDP/IPv6 checksum of the packet in d_buf and d_appdata. * ****************************************************************************/ #if defined(CONFIG_NET_UDP_CHECKSUMS) && defined(CONFIG_NET_IPv6) uint16_t udp_ipv6_chksum(FAR struct net_driver_s *dev); #endif /**************************************************************************** * Name: icmp_chksum * * Description: * Calculate the checksum of the IPv4 ICMP message * ****************************************************************************/ #ifdef CONFIG_NET_ICMP uint16_t icmp_chksum(FAR struct net_driver_s *dev, int len); #endif /**************************************************************************** * Name: icmp_chksum_iob * * Description: * Calculate the checksum of the ICMP message, the input can be an I/O * buffer chain * ****************************************************************************/ #if defined(CONFIG_NET_ICMP) && defined(CONFIG_MM_IOB) uint16_t icmp_chksum_iob(FAR struct iob_s *iob); #endif /* CONFIG_NET_ICMP && CONFIG_MM_IOB */ /**************************************************************************** * Name: icmpv6_chksum * * Description: * Calculate the checksum of the ICMPv6 message * ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6 uint16_t icmpv6_chksum(FAR struct net_driver_s *dev, unsigned int iplen); #endif /**************************************************************************** * Name: cmsg_append * * Description: * Append specified data into the control message, msg_control and * msg_controllen will be changed to the appropriate value when success * * Input Parameters: * msg - Buffer to receive the message. * level - The level of control message. * type - The type of control message. * value - If the value is not NULL, this interface copies the data * to the appropriate location in msg_control, and modify * msg_control and msg_controllen. * If the value is NULL, just modify the corresponding value * of msg. * value_len - The value length of control message. * * Returned Value: * On success, a pointer to the start address of control message data, * the caller can copy the data in. * On failure, return NULL, because of msg_controllen is not enough * ****************************************************************************/ FAR void *cmsg_append(FAR struct msghdr *msg, int level, int type, FAR void *value, int value_len); #undef EXTERN #ifdef __cplusplus } #endif #endif /* __NET_UTILS_UTILS_H */