/**************************************************************************** * boards/arm/samd5e5/same54-xplained-pro/src/sam_autoleds.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* The SAME54 Xplained Pro has three LEDs, but only one is controllable by software: * * 1. LED0 near the edge of the board * * ----------------- ----------- * SAMD5E5 FUNCTION * ----------------- ----------- * PC18 GPIO output * * This LED is not used by the board port unless CONFIG_ARCH_LEDS is * defined. In that case, the usage by the board port is defined in * include/board.h and src/sam_autoleds.c. The LEDs are used to encode * OS-related events as follows: * * ------------------- ---------------------------- ------ * SYMBOL Meaning LED * ------------------- ---------------------------- ------ * * LED_STARTED NuttX has been started OFF * LED_HEAPALLOCATE Heap has been allocated OFF * LED_IRQSENABLED Interrupts enabled OFF * LED_STACKCREATED Idle stack created ON * LED_INIRQ In an interrupt N/C * LED_SIGNAL In a signal handler N/C * LED_ASSERTION An assertion failed N/C * LED_PANIC The system has crashed FLASH * LED_IDLE MCU is is sleep mode Not used */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include "arm_arch.h" #include "arm_internal.h" #include "sam_port.h" #include "same54-xplained-pro.h" #include #ifdef CONFIG_ARCH_LEDS /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* LED Power Management */ #ifdef CONFIG_PM static void led_pm_notify(struct pm_callback_s *cb, int domain, enum pm_state_e pmstate); static int led_pm_prepare(struct pm_callback_s *cb, int domain, enum pm_state_e pmstate); #endif /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_PM static struct pm_callback_s g_ledscb = { .notify = led_pm_notify, .prepare = led_pm_prepare, }; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: led_pm_notify * * Description: * Notify the driver of new power state. This callback is called after * all drivers have had the opportunity to prepare for the new power state. * ****************************************************************************/ #ifdef CONFIG_PM static void led_pm_notify(struct pm_callback_s *cb, int domain, enum pm_state_e pmstate) { switch (pmstate) { case(PM_NORMAL): { /* Restore normal LEDs operation */ } break; case(PM_IDLE): { /* Entering IDLE mode - Turn leds off */ } break; case(PM_STANDBY): { /* Entering STANDBY mode - Logic for PM_STANDBY goes here */ } break; case(PM_SLEEP): { /* Entering SLEEP mode - Logic for PM_SLEEP goes here */ } break; default: { /* Should not get here */ } break; } } #endif /**************************************************************************** * Name: led_pm_prepare * * Description: * Request the driver to prepare for a new power state. This is a warning * that the system is about to enter into a new power state. The driver * should begin whatever operations that may be required to enter power * state. The driver may abort the state change mode by returning a * non-zero value from the callback function. * ****************************************************************************/ #ifdef CONFIG_PM static int led_pm_prepare(struct pm_callback_s *cb, int domain, enum pm_state_e pmstate) { /* No preparation to change power modes is required by the LEDs driver. * We always accept the state change by returning OK. */ return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: board_autoled_initialize ****************************************************************************/ void board_autoled_initialize(void) { (void)sam_portconfig(PORT_LED0); } /**************************************************************************** * Name: board_autoled_on ****************************************************************************/ void board_autoled_on(int led) { bool ledstate = true; switch (led) { case 0: /* LED_STARTED: NuttX has been started STATUS LED=OFF * LED_HEAPALLOCATE: Heap has been allocated STATUS LED=OFF * LED_IRQSENABLED: Interrupts enabled STATUS LED=OFF */ break; /* Leave ledstate == true to turn OFF */ default: case 2: /* LED_INIRQ: In an interrupt STATUS LED=N/C * LED_SIGNAL: In a signal handler STATUS LED=N/C * LED_ASSERTION: An assertion failed STATUS LED=N/C */ return; /* Return to leave STATUS LED unchanged */ case 3: /* LED_PANIC: The system has crashed STATUS LED=FLASH */ case 1: /* LED_STACKCREATED: Idle stack created STATUS LED=ON */ ledstate = false; /* Set ledstate == false to turn ON */ break; } sam_portwrite(PORT_LED0, ledstate); } /**************************************************************************** * Name: board_autoled_off ****************************************************************************/ void board_autoled_off(int led) { switch (led) { /* These should not happen and are ignored */ default: case 0: /* LED_STARTED: NuttX has been started STATUS LED=OFF * LED_HEAPALLOCATE: Heap has been allocated STATUS LED=OFF * LED_IRQSENABLED: Interrupts enabled STATUS LED=OFF */ case 1: /* LED_STACKCREATED: Idle stack created STATUS LED=ON */ /* These result in no-change */ case 2: /* LED_INIRQ: In an interrupt STATUS LED=N/C * LED_SIGNAL: In a signal handler STATUS LED=N/C * LED_ASSERTION: An assertion failed STATUS LED=N/C */ return; /* Return to leave STATUS LED unchanged */ /* Turn STATUS LED off set driving the output high */ case 3: /* LED_PANIC: The system has crashed STATUS LED=FLASH */ sam_portwrite(PORT_LED0, true); break; } } /**************************************************************************** * Name: sam_led_pminitialize * * Description: * Register LED power management features. * ****************************************************************************/ #ifdef CONFIG_PM void sam_led_pminitialize(void) { /* Register to receive power management callbacks */ int ret = pm_register(&g_ledscb); if (ret != OK) { board_autoled_on(LED_ASSERTION); } } #endif /* CONFIG_PM */ #endif /* CONFIG_ARCH_LEDS */