/**************************************************************************** * drivers/sensors/adxl372.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #if defined(CONFIG_SPI) && defined(CONFIG_SENSORS_ADXL372) \ && defined(CONFIG_SPI_EXCHANGE) #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define ADXL372_INITIAL_CR_SIZE 7 /**************************************************************************** * Private structure definitions ****************************************************************************/ struct sensor_data_s { int16_t x_gyr; /* Measurement result for x axis */ int16_t y_gyr; /* Measurement result for y axis */ int16_t z_gyr; /* Measurement result for z axis */ }; struct adxl372_dev_s { FAR struct adxl372_dev_s *flink; /* Supports a singly linked list of * drivers */ FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */ FAR struct adxl372_config_s *config; /* Pointer to the configuration of the * ADXL372 sensor */ sem_t devicesem; /* Manages exclusive access to this * device */ sem_t datasem; /* Manages exclusive access to this * structure */ struct sensor_data_s data; /* The data as measured by the sensor */ uint8_t seek_address; /* Current device address. */ uint8_t readonly; /* 0 = writing to the device in enabled */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static uint8_t adxl372_read_register(FAR struct adxl372_dev_s *dev, uint8_t reg_addr); static void adxl372_read_registerblk(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, FAR uint8_t *reg_data, uint8_t xfercnt); static void adxl372_write_register(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, uint8_t reg_data); static void adxl372_write_registerblk(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, FAR uint8_t *reg_data, uint8_t xfercnt); static void adxl372_reset(FAR struct adxl372_dev_s *dev); static int adxl372_open(FAR struct file *filep); static int adxl372_close(FAR struct file *filep); static ssize_t adxl372_read(FAR struct file *, FAR char *, size_t); static ssize_t adxl372_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static off_t adxl372_seek(FAR struct file *filep, off_t offset, int whence); static int adxl372_ioctl(FAR struct file *filep, int cmd, unsigned long arg); static int adxl372_dvr_open(FAR void *instance, int32_t arg); static int adxl372_dvr_close(FAR void *instance, int32_t arg); static ssize_t adxl372_dvr_read(FAR void *instance, FAR char *buffer, size_t buflen); static ssize_t adxl372_dvr_write(FAR void *instance, FAR const char *buffer, size_t buflen); static off_t adxl372_dvr_seek(FAR void *instance, off_t offset, int whence); static int adxl372_dvr_ioctl(FAR void *instance, int cmd, unsigned long arg); static void adxl372_dvr_exchange(FAR void *instance, FAR const void *txbuffer, FAR void *rxbuffer, size_t nwords); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_adxl372_fops = { adxl372_open, adxl372_close, adxl372_read, adxl372_write, adxl372_seek, adxl372_ioctl, NULL #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL #endif }; static const struct adxl372_dvr_entry_vector_s g_adxl372_dops = { /* Standard sensor cluster driver entry-vector */ { .driver_open = adxl372_dvr_open, .driver_close = adxl372_dvr_close, .driver_read = adxl372_dvr_read, .driver_write = adxl372_dvr_write, .driver_seek = adxl372_dvr_seek, .driver_ioctl = adxl372_dvr_ioctl, .driver_suspend = 0, .driver_resume = 0, }, /* adxl372 extensions follow */ .driver_spiexc = adxl372_dvr_exchange, }; /**************************************************************************** * Private data storage ****************************************************************************/ /* Single linked list to store instances of drivers */ static struct adxl372_dev_s *g_adxl372_list = NULL; /* Default accelerometer initialization sequence */ /* Configure ADXL372 to read live data (not using FIFO). * 1. Set to standby mode. The below can't be set while running. * 2. Configure the FIFO to be bypassed. * 3. Configure interrupts as disabled, because ADXL372 irpts are used. * 4. Configure the Output Data Rate (ODR) as 1600 Hz. * 5. Configure normal mode (vs low noise) and 800Hz bandwidth. * 6. Set to operational mode; 370ms filter settle; LPF=enb; HPF=dis; */ static struct adxl372_reg_pair_s g_initial_adxl372_cr_values[] = { /* Set to standby mode */ { .addr = ADXL372_POWER_CTL, .value = 0 }, { .addr = ADXL372_FIFO_CTL, .value = ADXL372_FIFO_BYPASSED }, /* Interrupts disabled. */ { .addr = ADXL372_INT1_MAP, .value = 0 }, { .addr = ADXL372_TIMING, .value = ADXL372_TIMING_ODR1600 }, { .addr = ADXL372_MEASURE, .value = ADXL372_MEAS_BW800 }, { .addr = ADXL372_POWER_CTL, .value = ADXL372_POWER_HPF_DISABLE | ADXL372_POWER_MODE_MEASURE } }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: adxl372_read_register ****************************************************************************/ static uint8_t adxl372_read_register(FAR struct adxl372_dev_s *dev, uint8_t reg_addr) { uint8_t reg_data; /* Lock the SPI bus so that only one device can access it * at the same time */ SPI_LOCK(dev->spi, true); SPI_SETFREQUENCY(dev->spi, ADXL372_SPI_FREQUENCY); SPI_SETMODE(dev->spi, ADXL372_SPI_MODE); /* Set CS to low to select the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address from where we want to read. */ SPI_SEND(dev->spi, reg_addr | ADXL372_READ); /* Write an idle byte while receiving the requested data */ reg_data = (uint8_t) (SPI_SEND(dev->spi, 0xff)); /* Set CS to high to deselect the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); return reg_data; } /**************************************************************************** * Name: adxl372_read_registerblk ****************************************************************************/ static void adxl372_read_registerblk(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, FAR uint8_t *reg_data, uint8_t xfercnt) { /* Lock the SPI bus so that only one device can access it * at the same time */ SPI_LOCK(dev->spi, true); SPI_SETFREQUENCY(dev->spi, ADXL372_SPI_FREQUENCY); SPI_SETMODE(dev->spi, ADXL372_SPI_MODE); /* Set CS to low to select the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address from where we want to start reading */ SPI_SEND(dev->spi, reg_addr | ADXL372_READ); /* Write idle bytes while receiving the requested data */ while (0 != xfercnt--) { *reg_data++ = (uint8_t)SPI_SEND(dev->spi, 0xff); } /* Set CS to high to deselect the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: adxl372_write_register ****************************************************************************/ static void adxl372_write_register(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, uint8_t reg_data) { /* Lock the SPI bus so that only one device can access it * at the same time */ SPI_LOCK(dev->spi, true); SPI_SETFREQUENCY(dev->spi, ADXL372_SPI_FREQUENCY); SPI_SETMODE(dev->spi, ADXL372_SPI_MODE); /* Set CS to low to select the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address to where we want to write */ SPI_SEND(dev->spi, reg_addr | ADXL372_WRITE); /* Transmit the content which should be written into the register */ SPI_SEND(dev->spi, reg_data); /* Set CS to high to deselect the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: adxl372_write_registerblk ****************************************************************************/ static void adxl372_write_registerblk(FAR struct adxl372_dev_s *dev, uint8_t reg_addr, FAR uint8_t *reg_data, uint8_t xfercnt) { /* Lock the SPI bus so that only one device can access it * at the same time */ SPI_LOCK(dev->spi, true); SPI_SETFREQUENCY(dev->spi, ADXL372_SPI_FREQUENCY); SPI_SETMODE(dev->spi, ADXL372_SPI_MODE); /* Set CS to low which selects the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); /* Transmit the register address to where we want to start writing */ SPI_SEND(dev->spi, reg_addr | ADXL372_WRITE); /* Transmit the content which should be written in the register block */ while (0 != xfercnt--) { SPI_SEND(dev->spi, *reg_data++); } /* Set CS to high to deselect the ADXL372 */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: adxl372_reset * * Description: * ADXL Accelerometer Reset * 1. Make sure that a reset is not in progress. * 2. Write ADXL372_RESET_VALUE (0x52) to ADXL372_RESET register. * 3. Wait for the reset to finish. * ****************************************************************************/ static void adxl372_reset(FAR struct adxl372_dev_s *dev) { uint wdcnt = 10; /* Wait for boot to finish (15 ms error timeout) */ up_mdelay(5); while (wdcnt > 0 && (0 != adxl372_read_register(dev, ADXL372_RESET))) { up_mdelay(1); } /* Reset ADXL372 Accelerometer. Write only. Begin a boot. */ adxl372_write_register(dev, ADXL372_RESET, ADXL372_RESET_VALUE); /* Wait for boot to finish (15 ms error timeout) */ up_mdelay(5); wdcnt = 10; while (wdcnt > 0 && (0 != adxl372_read_register(dev, ADXL372_RESET))) { up_mdelay(1); } } /**************************************************************************** * Name: adxl372_read_id * * Description: * * Read the ADXL372 Accelerometer's ID Registers. * There are 4 ID Registers... * * Manufacturer should be ADXL372_DEVID_AD_VALUE (0xAD). * Family should be ADXL372_DEVID_MST_VALUE (0x1D). * Part ID should be ADXL372_PARTID_VALUE (0xFA, Octal 372) * Revision is returned, but not expected to be checked. * All of the above are returned as an uint32_t. Should be 0xAD1DFAxx. * ****************************************************************************/ static uint32_t adxl372_read_id(FAR struct adxl372_dev_s *dev) { union { uint32_t adxl_devid32; uint8_t adxl_devid[4]; } un; un.adxl_devid[3] = adxl372_read_register(dev, ADXL372_DEVID_AD); un.adxl_devid[2] = adxl372_read_register(dev, ADXL372_DEVID_MST); un.adxl_devid[1] = adxl372_read_register(dev, ADXL372_PARTID); un.adxl_devid[0] = adxl372_read_register(dev, ADXL372_REVID); return un.adxl_devid32; } /**************************************************************************** * Name: adxl372_dvr_open ****************************************************************************/ static int adxl372_dvr_open(FAR void *instance, int32_t arg) { FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; FAR struct adxl372_reg_pair_s *initp; uint32_t pnpid; int sz; int ret; int i; #ifdef CONFIG_DEBUG_SENSORS_INFO uint8_t reg_content; #endif sninfo("adxl372_open: entered...\n"); DEBUGASSERT(priv != NULL); UNUSED(arg); ret = nxsem_trywait(&priv->devicesem); if (ret < 0) { sninfo("INFO: ADXL372 Accelerometer is already opened.\n"); return -EBUSY; } /* Read the ID registers */ pnpid = adxl372_read_id(priv); priv->readonly = false; sninfo("ADXL372_ID = 0x%08x\n", pnpid); if ((pnpid & 0xffffff00) != (ADXL372_DEVID_AD_VALUE << 24 | ADXL372_DEVID_MST_VALUE << 16 | ADXL372_PARTID_VALUE << 8)) { snwarn("ERROR: Invalid ADXL372_ID = 0x%08x\n", pnpid); priv->readonly = true; } else /* ID matches */ { adxl372_reset(priv); /* Perform a sensor reset */ /* Choose the initialization sequence */ if (priv->config->initial_cr_values_size == 0 || priv->config->initial_cr_values == NULL) { initp = g_initial_adxl372_cr_values; /* Default values */ sz = ADXL372_INITIAL_CR_SIZE; } else { initp = priv->config->initial_cr_values; /* User supplied values */ sz = priv->config->initial_cr_values_size; } /* Apply the initialization sequence */ for (i = 0; i < sz; i++) { adxl372_write_register(priv, initp[i].addr, initp[i].value); } #ifdef CONFIG_DEBUG_SENSORS_INFO /* Read back the content of all control registers for debug purposes */ reg_content = adxl372_read_register(priv, ADXL372_FIFO_CTL); sninfo("ADXL372_FIFO_CTL = 0x%02x\n", reg_content); reg_content = adxl372_read_register(priv, ADXL372_INT1_MAP); sninfo("ADXL372_INT1_MAP = 0x%02x\n", reg_content); reg_content = adxl372_read_register(priv, ADXL372_TIMING); sninfo("ADXL372_TIMING = 0x%02x\n", reg_content); reg_content = adxl372_read_register(priv, ADXL372_MEASURE); sninfo("ADXL372_MEASURE = 0x%02x\n", reg_content); reg_content = adxl372_read_register(priv, ADXL372_POWER_CTL); sninfo("ADXL372_POWER_CTL = 0x%02x\n", reg_content); #endif } priv->seek_address = (uint8_t) ADXL372_XDATA_H; return OK; } /**************************************************************************** * Name: adxl372_dvr_close ****************************************************************************/ static int adxl372_dvr_close(FAR void *instance, int32_t arg) { FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; DEBUGASSERT(priv != NULL); UNUSED(arg); /* Perform a reset to place the sensor in standby mode. */ adxl372_reset(priv); /* Release the sensor */ nxsem_post(&priv->devicesem); return OK; } /**************************************************************************** * Name: adxl372_dvr_read ****************************************************************************/ static ssize_t adxl372_dvr_read(FAR void *instance, FAR char *buffer, size_t buflen) { FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; union { int16_t d16; char d8[2]; } un; FAR char *p1; FAR char *p2; int i; DEBUGASSERT(priv != NULL); adxl372_read_registerblk(priv, priv->seek_address, (uint8_t *)buffer, buflen); /* Permute accelerometer data out fields */ if (priv->seek_address == ADXL372_XDATA_H && buflen >= 6) { p1 = p2 = buffer; for (i = 0; i < 3; i++) { un.d8[1] = *p1++; un.d8[0] = *p1++; un.d16 = un.d16 >> 4; *p2++ = un.d8[0]; *p2++ = un.d8[1]; } } return buflen; } /**************************************************************************** * Name: adxl372_dvr_write ****************************************************************************/ static ssize_t adxl372_dvr_write(FAR void *instance, FAR const char *buffer, size_t buflen) { FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; DEBUGASSERT(priv != NULL); if (priv->readonly) { return -EROFS; } adxl372_write_registerblk(priv, priv->seek_address, (uint8_t *)buffer, buflen); return buflen; } /**************************************************************************** * Name: adxl372_dvr_seek ****************************************************************************/ static off_t adxl372_dvr_seek(FAR void *instance, off_t offset, int whence) { off_t reg; FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; DEBUGASSERT(priv != NULL); switch (whence) { case SEEK_CUR: /* Incremental seek */ reg = priv->seek_address + offset; if (0 > reg || reg > ADXL372_LAST) { return -EINVAL; } priv->seek_address = reg; break; case SEEK_END: /* Seek to the 1st X-data register */ priv->seek_address = ADXL372_XDATA_H; break; case SEEK_SET: /* Seek to designated address */ if (0 > offset || offset > ADXL372_LAST) { return -EINVAL; } priv->seek_address = offset; break; default: /* invalid whence */ return -EINVAL; } return priv->seek_address; } /**************************************************************************** * Name: adxl372_dvr_ioctl ****************************************************************************/ static int adxl372_dvr_ioctl(FAR void *instance, int cmd, unsigned long arg) { int ret = OK; switch (cmd) { /* Command was not recognized */ default: snerr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } return ret; } /**************************************************************************** * Name: adxl372_dvr_exchange (with SPI DMA capability) * * Description: * Exchange a block of data on SPI using DMA * * Input Parameters: * instance - Pointer to struct adxl372_dev_s. * txbuffer - A pointer to the buffer of data to be sent * rxbuffer - A pointer to a buffer in which to receive data * nwords - the length of data to be exchanged in units of words. * The wordsize is determined by the number of bits-per-word * selected for the SPI interface. If nbits <= 8, the data is * packed into uint8_t's; if nbits >8, the data is packed into * uint16_t's * * Returned Value: * None * ****************************************************************************/ static void adxl372_dvr_exchange(FAR void *instance, FAR const void *txbuffer, FAR void *rxbuffer, size_t nwords) { FAR struct adxl372_dev_s *priv = (FAR struct adxl372_dev_s *)instance; FAR struct spi_dev_s *spi = priv->spi; /* Lock the SPI bus so that only one device can access it * at the same time */ SPI_LOCK(spi, true); SPI_SETFREQUENCY(spi, ADXL372_SPI_FREQUENCY); SPI_SETMODE(spi, ADXL372_SPI_MODE); /* Set CS to low which selects the ADXL372 */ SPI_SELECT(spi, priv->config->spi_devid, true); /* Perform an SPI exchange block operation. */ SPI_EXCHANGE(spi, txbuffer, rxbuffer, nwords); /* Set CS to high to deselect the ADXL372 */ SPI_SELECT(spi, priv->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(spi, false); } /**************************************************************************** * Name: adxl372_open ****************************************************************************/ static int adxl372_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; int ret; ret = adxl372_dvr_open((FAR void *)priv, 0); return ret; } /**************************************************************************** * Name: adxl372_close ****************************************************************************/ static int adxl372_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; int ret; ret = adxl372_dvr_close((FAR void *)priv, 0); return ret; } /**************************************************************************** * Name: adxl372_read ****************************************************************************/ static ssize_t adxl372_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; return adxl372_dvr_read(priv, buffer, buflen); } /**************************************************************************** * Name: adxl372_write ****************************************************************************/ static ssize_t adxl372_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; return adxl372_dvr_write(priv, buffer, buflen); } /**************************************************************************** * Name: adxl372_seek ****************************************************************************/ static off_t adxl372_seek(FAR struct file *filep, off_t offset, int whence) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; return adxl372_dvr_seek(priv, offset, whence); } /**************************************************************************** * Name: adxl372_ioctl ****************************************************************************/ static int adxl372_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct adxl372_dev_s *priv = inode->i_private; return adxl372_dvr_ioctl(priv, cmd, arg); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: adxl372_register * * Description: * Register the ADXL372 character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/acl0" * spi - An instance of the SPI interface to use to communicate with * ADXL372 * config - Configuration for the ADXL372 accelerometer driver. For * details see description above. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int adxl372_register(FAR const char *devpath, FAR struct spi_dev_s *spi, FAR struct adxl372_config_s *config) { FAR struct adxl372_dev_s *priv; int ret; /* Sanity check */ DEBUGASSERT(spi != NULL); DEBUGASSERT(config != NULL); /* Initialize the ADXL372 accelerometer device structure. */ priv = kmm_malloc(sizeof(struct adxl372_dev_s)); if (priv == NULL) { snerr("ERROR: Failed to allocate accelerometer instance\n"); return -ENOMEM; } priv->spi = spi; priv->config = config; config->leaf_handle = NULL; config->sc_ops = NULL; /* Initialize sensor and sensor data access semaphore */ nxsem_init(&priv->devicesem, 0, 1); nxsem_init(&priv->datasem, 0, 1); /* Register the character driver */ ret = register_driver(devpath, &g_adxl372_fops, 0666, priv); if (ret < 0) { snerr("ERROR: Failed to register accelerometer driver: %d\n", ret); nxsem_destroy(&priv->datasem); kmm_free(priv); return ret; } /* Since we support multiple ADXL372 devices, we will need to add this new * instance to a list of device instances so that it can be found by the * interrupt handler based on the received IRQ number. */ priv->flink = g_adxl372_list; g_adxl372_list = priv; config->leaf_handle = (void *) priv; config->sc_ops = &g_adxl372_dops; return OK; } #endif /* CONFIG_SPI && CONFIG_SENSORS_ADXL372 && CONFIG_SPI_EXCHANGE */