/**************************************************************************** * net/icmpv6/icmpv6_reply.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "utils/utils.h" #include "netdev/netdev.h" #include "devif/devif.h" #include "inet/inet.h" #include "icmpv6/icmpv6.h" #ifdef CONFIG_NET_ICMPv6 /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* The latest drafts declared increase in minimal mtu up to 1280. */ #define ICMPv6_MINMTULEN 1280 /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: icmp_reply * * Description: * Send an ICMPv6 message in response to a situation * RFC 1122: 3.2.2 MUST send at least the IP header and 8 bytes of header. * MAY send more (we do). * MUST NOT change this header information. * MUST NOT reply to a multicast/broadcast IP address. * MUST NOT reply to a multicast/broadcast MAC address. * MUST reply to only the first fragment. * * Input Parameters: * dev - The device driver structure containing the received packet * type - ICMPv6 Message Type, eg. ICMPv6_DEST_UNREACHABLE * code - ICMPv6 Message Code, eg. ICMPv6_PORT_UNREACH * data - Additional 32-bit parameter in the ICMPv6 header * * Returned Value: * None * ****************************************************************************/ void icmpv6_reply(FAR struct net_driver_s *dev, int type, int code, int data) { int ipicmplen = IPv6_HDRLEN + sizeof(struct icmpv6_hdr_s); FAR struct ipv6_hdr_s *ipv6 = IPv6BUF; FAR struct icmpv6_hdr_s *icmpv6 = (FAR struct icmpv6_hdr_s *)(ipv6 + 1); uint16_t datalen; uint16_t paylen; if (net_ipv6addr_cmp(ipv6->destipaddr, g_ipv6_unspecaddr) # ifdef CONFIG_NET_BROADCAST || net_is_addr_mcast(ipv6->destipaddr) # endif /* CONFIG_NET_BROADCAST */ ) { dev->d_len = 0; return; } /* Get the data (whole original packet) size of the packet. */ datalen = (ipv6->len[0] << 8) + ipv6->len[1] + IPv6_HDRLEN; /* RFC says return as much as we can without exceeding 1280 bytes. */ if (datalen > ICMPv6_MINMTULEN - ipicmplen) { datalen = ICMPv6_MINMTULEN - ipicmplen; } dev->d_len = ipicmplen + datalen; paylen = dev->d_len - IPv6_HDRLEN; /* Copy fields from original packet */ memmove(icmpv6 + 1, ipv6, datalen); /* Set up the IPv6 header (most is probably already in place) */ ipv6->vtc = 0x60; /* Version/traffic class (MS) */ ipv6->tcf = 0; /* Traffic class(LS)/Flow label(MS) */ ipv6->flow = 0; /* Flow label (LS) */ ipv6->len[0] = (paylen >> 8); /* Length excludes the IPv6 header */ ipv6->len[1] = (paylen & 0xff); ipv6->proto = IP_PROTO_ICMP6; /* Next header */ ipv6->ttl = 255; /* Hop limit */ net_ipv6addr_hdrcopy(ipv6->destipaddr, ipv6->srcipaddr); net_ipv6addr_hdrcopy(ipv6->srcipaddr, dev->d_ipv6addr); /* Initialize the ICMPv6 header */ icmpv6->type = type; icmpv6->code = code; icmpv6->data[0] = data >> 16; icmpv6->data[1] = data & 0xffff; /* Calculate the ICMPv6 checksum over the ICMPv6 header and payload. */ icmpv6->chksum = 0; icmpv6->chksum = ~icmpv6_chksum(dev, IPv6_HDRLEN); if (icmpv6->chksum == 0) { icmpv6->chksum = 0xffff; } ninfo("Outgoing ICMPv6 packet length: %d (%d)\n", dev->d_len, (ipv6->len[0] << 8) | ipv6->len[1]); } #endif /* CONFIG_NET_ICMPv6 */