#!/usr/bin/env python3
# tools/gdbserver.py
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.  The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
# License for the specific language governing permissions and limitations
# under the License.
#

import argparse
import binascii
import logging
import multiprocessing
import os
import re
import shutil
import socket
import struct
import subprocess
import sys

import elftools
from elftools.elf.elffile import ELFFile

# ELF section flags
SHF_WRITE = 0x1
SHF_ALLOC = 0x2
SHF_EXEC = 0x4
SHF_WRITE_ALLOC = SHF_WRITE | SHF_ALLOC
SHF_ALLOC_EXEC = SHF_ALLOC | SHF_EXEC

GDB_SIGNAL_DEFAULT = 7

UINT16_MAX = 65535


DEFAULT_GDB_INIT_CMD = "-ex 'bt full' -ex 'info reg' -ex 'display /40i $pc-40'"

logger = logging.getLogger()

# The global register table is dictionary like {arch:{reg:ndx}}
#
# where arch is the CPU architecture name;
#       reg  is the name of the register as used in log file
#       ndx  is the index of the register in GDB group registers list
#
# Registers with multiple convenient names can have multiple entries here, one
# for each name and with the same index.
reg_table = {
    "arm": {
        "R0": 0,
        "R1": 1,
        "R2": 2,
        "R3": 3,
        "R4": 4,
        "R5": 5,
        "R6": 6,
        "FP": 7,
        "R8": 8,
        "SB": 9,
        "SL": 10,
        "R11": 11,
        "IP": 12,
        "SP": 13,
        "LR": 14,
        "PC": 15,
        "xPSR": 16,
    },
    "arm-a": {
        "R0": 0,
        "R1": 1,
        "R2": 2,
        "R3": 3,
        "R4": 4,
        "R5": 5,
        "R6": 6,
        "R7": 7,
        "R8": 8,
        "SB": 9,
        "SL": 10,
        "FP": 11,
        "IP": 12,
        "SP": 13,
        "LR": 14,
        "PC": 15,
        "CPSR": 41,
    },
    "arm-t": {
        "R0": 0,
        "R1": 1,
        "R2": 2,
        "R3": 3,
        "R4": 4,
        "R5": 5,
        "R6": 6,
        "FP": 7,
        "R8": 8,
        "SB": 9,
        "SL": 10,
        "R11": 11,
        "IP": 12,
        "SP": 13,
        "LR": 14,
        "PC": 15,
        "CPSR": 41,
    },
    # rv64 works with gdb-multiarch on Ubuntu
    "riscv": {
        "ZERO": 0,
        "RA": 1,
        "SP": 2,
        "GP": 3,
        "TP": 4,
        "T0": 5,
        "T1": 6,
        "T2": 7,
        "FP": 8,
        "S1": 9,
        "A0": 10,
        "A1": 11,
        "A2": 12,
        "A3": 13,
        "A4": 14,
        "A5": 15,
        "A6": 16,
        "A7": 17,
        "S2": 18,
        "S3": 19,
        "S4": 20,
        "S5": 21,
        "S6": 22,
        "S7": 23,
        "S8": 24,
        "S9": 25,
        "S10": 26,
        "S11": 27,
        "T3": 28,
        "T4": 29,
        "T5": 30,
        "T6": 31,
        "PC": 32,
        "S0": 8,
        "EPC": 32,
    },
    # use xtensa-esp32s3-elf-gdb register table
    "esp32s3": {
        "PC": 0,
        "PS": 73,
        "A0": 1,
        "A1": 2,
        "A2": 3,
        "A3": 4,
        "A4": 5,
        "A5": 6,
        "A6": 7,
        "A7": 8,
        "A8": 9,
        "A9": 10,
        "A10": 11,
        "A11": 12,
        "A12": 13,
        "A13": 14,
        "A14": 15,
        "A15": 16,
        "WINDOWBASE": 69,
        "WINDOWSTART": 70,
        "CAUSE": 190,
        "VADDR": 196,
        "LBEG": 65,
        "LEND": 66,
        "LCNT": 67,
        "SAR": 68,
        "SCOM": 76,
    },
    # use xt-gdb register table
    "xtensa": {
        "PC": 32,
        "PS": 742,
        "A0": 256,
        "A1": 257,
        "A2": 258,
        "A3": 259,
        "A4": 260,
        "A5": 261,
        "A6": 262,
        "A7": 263,
        "A8": 264,
        "A9": 265,
        "A10": 266,
        "A11": 267,
        "A12": 268,
        "A13": 269,
        "A14": 270,
        "A15": 271,
        "WINDOWBASE": 584,
        "WINDOWSTART": 585,
        "CAUSE": 744,
        "VADDR": 750,
        "LBEG": 512,
        "LEND": 513,
        "LCNT": 514,
        "SAR": 515,
        "SCOM": 524,
    },
}

# make sure the a0-a15 can be remapped to the correct register
reg_fix_value = {
    "esp32s3": {
        "WINDOWBASE": (0, 69),
        "WINDOWSTART": (1, 70),
        "PS": (0x40000, 73),
    },
    "xtensa": {
        "WINDOWBASE": (0, 584),
        "WINDOWSTART": (1, 585),
        "PS": (0x40000, 742),
    },
    "riscv": {
        "ZERO": 0,
    },
}


def str_get_after(s, sub):
    index = s.find(sub)
    if index == -1:
        return None
    return s[index + len(sub) :]


def pack_memory(start, end, data):
    return {"start": start, "end": end, "data": data}


class DumpELFFile:
    """
    Class to parse ELF file for memory content in various sections.
    There are read-only sections (e.g. text and rodata) where
    the memory content does not need to be dumped via coredump
    and can be retrieved from the ELF file.
    """

    def __init__(self, elffile: str):
        self.elffile = elffile
        self.__memories = []
        self.__arch = None
        self.__xlen = None
        self.__text = 0

    def parse(self):
        self.__memories = []
        elf = ELFFile.load_from_path(self.elffile)
        self.__arch = elf.get_machine_arch().lower().replace("-", "")
        self.__xlen = elf.elfclass

        for section in elf.iter_sections():
            # REALLY NEED to match exact type as all other sections
            # (debug, text, etc.) are descendants where
            # isinstance() would match.
            if (
                type(section) is not elftools.elf.sections.Section
            ):  # pylint: disable=unidiomatic-typecheck
                continue

            size = section["sh_size"]
            flags = section["sh_flags"]
            start = section["sh_addr"]
            end = start + size - 1

            store = False
            desc = "?"

            if section["sh_type"] == "SHT_PROGBITS":
                if (flags & SHF_ALLOC_EXEC) == SHF_ALLOC_EXEC:
                    # Text section
                    store = True
                    desc = "text"
                elif (flags & SHF_WRITE_ALLOC) == SHF_WRITE_ALLOC:
                    # Data or Rodata section, rodata store in ram in some case
                    store = True
                    desc = "data or rodata"
                elif (flags & SHF_ALLOC) == SHF_ALLOC:
                    # Read only data section
                    store = True
                    desc = "read-only data"

            if store:
                memory = pack_memory(start, end, section.data())
                logger.debug(
                    f"ELF Section: {hex(memory['start'])} to {hex(memory['end'])} of size {len(memory['data'])} ({desc})"
                )

                self.__memories.append(memory)

        # record first text segment address
        for segment in elf.iter_segments():
            if segment.header.p_flags & 1 and not self.__text:
                self.__text = segment.header.p_vaddr

        symtab = elf.get_section_by_name(".symtab")
        self.symbol = {}
        for symbol in symtab.iter_symbols():
            if symbol["st_info"]["type"] != "STT_OBJECT":
                continue

            if symbol.name in (
                "g_tcbinfo",
                "g_pidhash",
                "g_npidhash",
                "g_last_regs",
                "g_running_tasks",
            ):
                self.symbol[symbol.name] = symbol
                logger.debug(
                    f"name:{symbol.name} size:{symbol['st_size']} value:{hex(symbol['st_value'])}"
                )

        elf.close()

        return True

    def merge(self, other):
        if other.arch() == self.arch() and other.xlen() == self.xlen():
            self.__memories += other.get_memories()
        else:
            raise TypeError("inconsistent ELF types")

    def get_memories(self):
        return self.__memories

    def arch(self):
        return self.__arch

    def xlen(self):
        return self.__xlen

    def text(self):
        return self.__text


class DumpLogFile:
    def __init__(self, logfile):
        self.logfile = logfile
        self.registers = []
        self.__memories = list()
        self.reg_table = dict()
        self.reg_len = 32

    def _init_register(self):
        # registers list should be able to hold the max index
        self.registers = [b"x"] * (max(self.reg_table.values()) + 1)

    def _parse_register(self, line):
        line = str_get_after(line, "up_dump_register:")
        if line is None:
            return False

        line = line.strip()
        # find register value
        find_res = re.findall(r"(?P<REG>\w+): (?P<REGV>[0-9a-fA-F]+)", line)

        for reg_name, reg_val in find_res:
            if reg_name in self.reg_table:
                reg_index = self.reg_table[reg_name]
                self.registers[reg_index] = int(reg_val, 16)
                self.reg_len = max(self.reg_len, len(reg_val) * 4)

        return True

    def _parse_fix_register(self, arch):
        if arch in reg_fix_value:
            for reg_name, reg_vals in reg_fix_value[arch].items():
                reg_index = self.reg_table[reg_name]
                self.registers[reg_index] = reg_vals[0]

    def _parse_stack(self, line, start, data):
        line = str_get_after(line, "stack_dump:")
        if line is None:
            return None

        line = line.strip()

        # find stack-dump
        match_res = re.match(r"(?P<ADDR_START>0x\w+): (?P<VALS>( ?\w+)+)", line)
        if match_res is None:
            return None

        addr_start = int(match_res.groupdict()["ADDR_START"], 16)
        if start + len(data) != addr_start:
            # stack is not contiguous
            if len(data) == 0:
                start = addr_start
            else:
                self.__memories.append(pack_memory(start, start + len(data), data))
                data = b""
                start = addr_start

        reg_fmt = "<I" if self.reg_len <= 32 else "<Q"
        for val in match_res.groupdict()["VALS"].split():
            data = data + struct.pack(reg_fmt, int(val, 16))

        return start, data

    def parse(self, arch):
        self.reg_table = reg_table[arch]
        self._init_register()

        data = bytes()
        start = 0

        if isinstance(self.logfile, list):
            lines = self.logfile
        else:
            with open(self.logfile, "r") as f:
                lines = f.readlines()

        for line_num, line in enumerate(lines):
            if line == "":
                break

            try:
                if self._parse_register(line):
                    continue

                res = self._parse_stack(line, start, data)
                if res:
                    start, data = res
                    continue

            except Exception as e:
                logger.error("parse log file error: %s line_number %d" % (e, line_num))
                sys.exit(1)

        self._parse_fix_register(arch)
        if data:
            self.__memories.append(pack_memory(start, start + len(data), data))

    def get_memories(self):
        return self.__memories


class RawMemoryFile:
    def __init__(self, rawfile):
        self.__memories = list()

        if rawfile is None:
            return

        for raw in rawfile:
            file, start = raw.split(":")
            start = int(start, 0)

            size = os.path.getsize(file)
            with open(file, "rb") as f:
                data = f.read(size)
                self.__memories.append(pack_memory(start, start + len(data), data))

    def get_memories(self):
        return self.__memories


class CoreDumpFile:
    def __init__(self, coredump):
        self.__memories = list()

        if coredump is None:
            return

        with open(coredump, "rb") as f:
            elffile = ELFFile(f)
            for segment in elffile.iter_segments():
                if segment["p_type"] != "PT_LOAD":
                    continue
                logger.debug(f"Segment Flags: {segment['p_flags']}")
                logger.debug(
                    f"Segment Offset: {segment['p_offset']}",
                )
                logger.debug(f"Segment Virtual Address: {hex(segment['p_vaddr'])}")
                logger.debug(f"Segment Physical Address: {hex(segment['p_paddr'])}")
                logger.debug(f"Segment File Size:{segment['p_filesz']}")
                logger.debug(f"Segment Memory Size:{segment['p_memsz']}")
                logger.debug(f"Segment Alignment:{segment['p_align']}")
                logger.debug("=" * 40)
                f.seek(segment["p_offset"], 0)
                data = f.read(segment["p_filesz"])
                self.__memories.append(
                    pack_memory(
                        segment["p_paddr"], segment["p_paddr"] + len(data), data
                    )
                )

    def get_memories(self):
        return self.__memories


class GDBStub:
    def __init__(
        self,
        logfile: DumpLogFile,
        elffile: DumpELFFile,
        rawfile: RawMemoryFile,
        coredump: CoreDumpFile,
        arch: str,
    ):
        self.registers = logfile.registers
        self.elffile = elffile
        self.socket = None
        self.gdb_signal = GDB_SIGNAL_DEFAULT
        self.arch = arch

        # new list oreder is coredump, rawfile, logfile, elffile

        self.mem_regions = (
            coredump.get_memories()
            + rawfile.get_memories()
            + logfile.get_memories()
            + self.elffile.get_memories()
        )
        self.reg_digits = elffile.xlen() // 4
        self.reg_fmt = "<I" if elffile.xlen() <= 32 else "<Q"

        self.threadinfo = []
        self.current_thread = 0
        try:
            self.parse_thread()
            logger.debug(f"Have {len(self.threadinfo)} threads to debug.")
            if len(self.threadinfo) == 0:
                logger.critical(
                    "Check if your coredump or raw file matches the ELF file"
                )
                sys.exit(1)

            if arch in reg_fix_value.keys():
                self.regfix = True
                logger.info(f"Current arch is {arch}, need reg index fix.")

        except TypeError:
            if not self.registers:
                logger.critical(
                    "Logfile, coredump, or rawfile do not contain register. Please check if the files are correct."
                )
                sys.exit(1)

    def get_gdb_packet(self):
        socket = self.socket
        if socket is None:
            return None

        data = b""
        checksum = 0
        # Wait for '$'
        while True:
            ch = socket.recv(1)
            if ch == b"$":
                break

        # Get a full packet
        while True:
            ch = socket.recv(1)
            if ch == b"#":
                # End of packet
                break

            checksum += ord(ch)
            data += ch

        # Get checksum (2-bytes)
        ch = socket.recv(2)
        in_chksum = ord(binascii.unhexlify(ch))

        logger.debug(f"Received GDB packet: {data}")

        if (checksum % 256) == in_chksum:
            # ACK
            logger.debug("ACK")
            socket.send(b"+")

            return data
        else:
            # NACK
            logger.debug(f"NACK (checksum {in_chksum} != {checksum}")
            socket.send(b"-")

            return None

    def put_gdb_packet(self, data):
        socket = self.socket
        if socket is None:
            return

        checksum = 0
        for d in data:
            checksum += d

        pkt = b"$" + data + b"#"

        checksum = checksum % 256
        pkt += format(checksum, "02X").encode()

        logger.debug(f"Sending GDB packet: {pkt}")

        socket.send(pkt)

    def handle_signal_query_packet(self):
        # the '?' packet
        pkt = b"S"
        pkt += format(self.gdb_signal, "02X").encode()

        self.put_gdb_packet(pkt)

    def handle_register_group_read_packet(self):

        def put_register_packet(regs):
            pkt = b""

            for reg in regs:
                if reg != b"x":
                    bval = struct.pack(self.reg_fmt, reg)
                    pkt += binascii.hexlify(bval)
                else:
                    # Register not in coredump -> unknown value
                    # Send in "xxxxxxxx"
                    pkt += b"x" * self.reg_digits

            self.put_gdb_packet(pkt)

        if not self.threadinfo:
            put_register_packet(self.registers)
        else:
            for thread in self.threadinfo:
                if thread["tcb"]["pid"] == self.current_thread:
                    if thread["tcb"]["tcbptr"] in self.running_tasks.keys():
                        put_register_packet(self.running_tasks[thread["tcb"]["tcbptr"]])
                    else:
                        put_register_packet(thread["gdb_regs"])
                    break

    def handle_register_single_read_packet(self, pkt):
        logger.debug(f"pkt: {pkt}")

        def put_one_register_packet(regs):

            regval = None
            reg = int(pkt[1:].decode("utf8"), 16)
            if self.regfix:
                for reg_name, reg_vals in reg_fix_value[self.arch].items():
                    if reg == reg_vals[1]:
                        logger.debug(f"{reg_name} fix to {reg_vals[0]}")
                        regval = reg_vals[0]

                if regval is None:
                    # tcbinfo index to gdb index
                    reg_gdb_index = list(reg_table[self.arch].values())
                    if reg in reg_gdb_index:
                        reg = reg_gdb_index.index(reg)
                        regval = regs[reg]

            elif reg < len(regs) and regs[reg] != b"x":
                regval = regs[reg]

            if regval is not None:
                bval = struct.pack(self.reg_fmt, regval)
                self.put_gdb_packet(binascii.hexlify(bval))
            else:
                self.put_gdb_packet(b"x" * self.reg_digits)

        if not self.threadinfo:
            put_one_register_packet(self.registers)
        else:
            for thread in self.threadinfo:
                if thread["tcb"]["pid"] == self.current_thread:
                    if thread["tcb"]["tcbptr"] in self.running_tasks.keys():
                        put_one_register_packet(
                            self.running_tasks[thread["tcb"]["tcbptr"]]
                        )
                    else:
                        put_one_register_packet(thread["gdb_regs"])
                    break

    def handle_register_group_write_packet(self):
        # the 'G' packet for writing to a group of registers
        #
        # We don't support writing so return error
        self.put_gdb_packet(b"E01")

    def handle_register_single_write_packet(self, pkt):
        # the 'P' packet for writing to registers

        index, value = pkt[1:].split(b"=")
        reg_val = 0
        for i in range(0, len(value), 2):
            data = value[i : i + 2]
            reg_val = reg_val + (int(data.decode("utf8"), 16) << (i * 4))

        reg = int(index.decode("utf8"), 16)
        if reg < len(self.registers):
            self.registers[reg] = reg_val

        self.put_gdb_packet(b"OK")

    def get_mem_region(self, addr):
        for mem in self.mem_regions:
            if mem["start"] <= addr < mem["end"]:
                return mem

        return None

    def handle_memory_read_packet(self, pkt):
        # the 'm' packet for reading memory: m<addr>,<len>

        # extract address and length from packet
        # and convert them into usable integer values
        addr, length = pkt[1:].split(b",")
        s_addr = int(addr, 16)
        length = int(length, 16)

        remaining = length
        addr = s_addr
        barray = b""
        r = self.get_mem_region(addr)
        while remaining > 0:
            if r is None:
                barray = None
                break

            offset = addr - r["start"]
            barray += r["data"][offset : offset + 1]

            addr += 1
            remaining -= 1

        if barray is not None:
            pkt = binascii.hexlify(barray)
            self.put_gdb_packet(pkt)
        else:
            self.put_gdb_packet(b"E01")

    def handle_memory_write_packet(self, pkt):
        # the 'M' packet for writing to memory
        #
        # We don't support writing so return error
        self.put_gdb_packet(b"E02")

    def handle_is_thread_active(self, pkt):
        self.current_thread = int(pkt[1:]) - 1
        self.put_gdb_packet(b"OK")

    def handle_thread_context(self, pkt):
        if b"g" == pkt[1:2]:
            self.current_thread = int(pkt[2:]) - 1
        elif b"c" == pkt[1:2]:
            self.current_thread = int(pkt[3:]) - 1

        if self.current_thread == -1:
            self.current_thread = 0
        self.put_gdb_packet(b"OK")

    def parse_thread(self):
        def unpack_data(addr, size, fmt):
            r = self.get_mem_region(addr)
            offset = addr - r["start"]
            data = r["data"][offset : offset + size]
            return struct.unpack(fmt, data)

        TCBINFO_FMT = "<8HQ"

        # uint16_t pid_off;                      /* Offset of tcb.pid               */
        # uint16_t state_off;                    /* Offset of tcb.task_state        */
        # uint16_t pri_off;                      /* Offset of tcb.sched_priority    */
        # uint16_t name_off;                     /* Offset of tcb.name              */
        # uint16_t stack_off;                    /* Offset of tcb.stack_alloc_ptr   */
        # uint16_t stack_size_off;               /* Offset of tcb.adj_stack_size    */
        # uint16_t regs_off;                     /* Offset of tcb.regs              */
        # uint16_t regs_num;                     /* Num of general regs             */
        # union
        #   {
        #     uint8_t             u[8];
        #     FAR const uint16_t *p;
        #   }

        unpacked_data = unpack_data(
            self.elffile.symbol["g_tcbinfo"]["st_value"],
            self.elffile.symbol["g_tcbinfo"]["st_size"],
            TCBINFO_FMT,
        )
        tcbinfo = {
            "pid_off": int(unpacked_data[0]),
            "state_off": int(unpacked_data[1]),
            "pri_off": int(unpacked_data[2]),
            "name_off": int(unpacked_data[3]),
            "stack_off": int(unpacked_data[4]),
            "stack_size_off": int(unpacked_data[5]),
            "regs_off": int(unpacked_data[6]),
            "regs_num": int(unpacked_data[7]),
            "reg_off": int(unpacked_data[8]),
        }

        unpacked_data = unpack_data(
            self.elffile.symbol["g_npidhash"]["st_value"],
            self.elffile.symbol["g_npidhash"]["st_size"],
            "<I",
        )
        npidhash = int(unpacked_data[0])
        logger.debug(f"g_npidhash is {hex(npidhash)}")

        unpacked_data = unpack_data(
            self.elffile.symbol["g_pidhash"]["st_value"],
            self.elffile.symbol["g_pidhash"]["st_size"],
            "<I",
        )
        pidhash = int(unpacked_data[0])
        logger.debug(f"g_pidhash is {hex(pidhash)}")

        tcbptr_list = []
        for i in range(0, npidhash):
            unpacked_data = unpack_data(pidhash + i * 4, 4, "<I")
            tcbptr_list.append(int(unpacked_data[0]))

        def parse_tcb(tcbptr):
            tcb = {}
            tcb["pid"] = int(unpack_data(tcbptr + tcbinfo["pid_off"], 4, "<I")[0])
            tcb["state"] = int(unpack_data(tcbptr + tcbinfo["state_off"], 1, "<B")[0])
            tcb["pri"] = int(unpack_data(tcbptr + tcbinfo["pri_off"], 1, "<B")[0])
            tcb["stack"] = int(unpack_data(tcbptr + tcbinfo["stack_off"], 4, "<I")[0])
            tcb["stack_size"] = int(
                unpack_data(tcbptr + tcbinfo["stack_size_off"], 4, "<I")[0]
            )
            tcb["regs"] = int(unpack_data(tcbptr + tcbinfo["regs_off"], 4, "<I")[0])
            tcb["tcbptr"] = tcbptr
            i = 0
            tcb["name"] = ""
            while True:
                c = int(unpack_data(tcbptr + tcbinfo["name_off"] + i, 1, "<B")[0])
                if c == 0:
                    break
                i += 1
                tcb["name"] += chr(c)

            return tcb

        def parse_regs_to_gdb(regs):
            gdb_regs = []
            for i in range(0, tcbinfo["regs_num"]):
                reg_off = int(unpack_data(tcbinfo["reg_off"] + i * 2, 2, "<H")[0])
                if reg_off == UINT16_MAX:
                    gdb_regs.append(b"x")
                else:
                    gdb_regs.append(int(unpack_data(regs + reg_off, 4, "<I")[0]))
            return gdb_regs

        self.cpunum = self.elffile.symbol["g_running_tasks"]["st_size"] // 4
        logger.debug(f"Have {self.cpunum} cpu")
        unpacked_data = unpack_data(
            self.elffile.symbol["g_running_tasks"]["st_value"],
            self.elffile.symbol["g_running_tasks"]["st_size"],
            f"<{self.cpunum}I",
        )

        self.running_tasks = {}
        last_regs_size = self.elffile.symbol["g_last_regs"]["st_size"] // self.cpunum
        logger.debug(f"last_regs_size is {last_regs_size}")
        for i in range(0, self.cpunum):
            self.running_tasks[int(unpacked_data[i])] = parse_regs_to_gdb(
                self.elffile.symbol["g_last_regs"]["st_value"] + i * last_regs_size
            )

        for tcbptr in tcbptr_list:
            if tcbptr == 0:
                continue
            thread_dict = {}
            tcb = parse_tcb(tcbptr)
            thread_dict["tcb"] = tcb
            thread_dict["gdb_regs"] = parse_regs_to_gdb(tcb["regs"])
            self.threadinfo.append(thread_dict)

    def handle_general_query_packet(self, pkt):
        if b"Rcmd" == pkt[1:5]:
            self.put_gdb_packet(b"OK")
        elif b"qfThreadInfo" == pkt[: len(b"qfThreadInfo")]:
            reply_str = "m"
            for thread in self.threadinfo:
                pid = thread["tcb"]["pid"]
                reply_str += "," + str(pid + 1)  # pid + 1 for gdb index

            reply = reply_str.encode("utf-8")
            self.put_gdb_packet(reply)

        elif b"qsThreadInfo" == pkt[: len(b"qsThreadInfo")]:
            self.put_gdb_packet(b"l")

        elif b"qThreadExtraInfo" == pkt[: len(b"qThreadExtraInfo")]:
            cmd, pid = pkt[1:].split(b",")
            pid = int(pid) - 1

            for thread in self.threadinfo:
                if thread["tcb"]["pid"] == pid:

                    pkt_str = "Name: %s, State: %d, Pri: %d, Stack: %x, Size: %d" % (
                        thread["tcb"]["name"],
                        thread["tcb"]["state"],
                        thread["tcb"]["pri"],
                        thread["tcb"]["stack"],
                        thread["tcb"]["stack_size"],
                    )
                    pkt = pkt_str.encode()
                    pkt_str = pkt.hex()
                    pkt = pkt_str.encode()
                    self.put_gdb_packet(pkt)
                    break
        else:
            self.put_gdb_packet(b"")

    def handle_vkill_packet(self, pkt):
        self.put_gdb_packet(b"OK")
        logger.debug("quit with gdb")
        sys.exit(0)

    def run(self, socket: socket.socket):
        self.socket = socket

        while True:
            pkt = self.get_gdb_packet()
            if pkt is None:
                continue

            pkt_type = pkt[0:1]
            logger.debug(f"Got packet type: {pkt_type}")

            if pkt_type == b"?":
                self.handle_signal_query_packet()
            elif pkt_type in (b"C", b"S"):
                # Continue/stepping execution, which is not supported.
                # So signal exception again
                self.handle_signal_query_packet()
            elif pkt_type == b"g":
                self.handle_register_group_read_packet()
            elif pkt_type == b"G":
                self.handle_register_group_write_packet()
            elif pkt_type == b"p":
                self.handle_register_single_read_packet(pkt)
            elif pkt_type == b"P":
                self.handle_register_single_write_packet(pkt)
            elif pkt_type == b"m":
                self.handle_memory_read_packet(pkt)
            elif pkt_type == b"M":
                self.handle_memory_write_packet(pkt)
            elif pkt_type == b"q":
                self.handle_general_query_packet(pkt)
            elif pkt.startswith(b"vKill") or pkt_type == b"k":
                # GDB quits
                self.handle_vkill_packet(pkt)
            elif pkt_type == b"H":
                self.handle_thread_context(pkt)
            elif pkt_type == b"T":
                self.handle_is_thread_active(pkt)
            else:
                self.put_gdb_packet(b"")


def arg_parser():
    parser = argparse.ArgumentParser()

    parser.add_argument(
        "-e", "--elffile", required=True, action="append", help="elffile"
    )
    parser.add_argument("-l", "--logfile", help="logfile")
    parser.add_argument(
        "-a",
        "--arch",
        help="Only use if can't be learnt from ELFFILE.",
        required=False,
        choices=[arch for arch in reg_table.keys()],
    )
    parser.add_argument("-p", "--port", help="gdbport", type=int, default=1234)
    parser.add_argument(
        "-g",
        "--gdb",
        help="provided a custom GDB path, automatically start GDB session and exit gdbserver when exit GDB. ",
        type=str,
    )
    parser.add_argument(
        "-i",
        "--init-cmd",
        nargs="?",
        default=argparse.SUPPRESS,
        help="provided a custom GDB init command, automatically start GDB sessions and input what you provide. "
        f"if you don't provide any command, it will use default command [{DEFAULT_GDB_INIT_CMD}]. ",
    )
    parser.add_argument(
        "-r",
        "--rawfile",
        nargs="*",
        help="rawfile is a binary file, args format like ram.bin:0x10000 ...",
    )

    parser.add_argument(
        "-c",
        "--coredump",
        nargs="?",
        help="coredump file, will prase memory in this file",
    )

    parser.add_argument(
        "--debug",
        action="store_true",
        default=False,
        help="if enabled, it will show more logs.",
    )
    return parser.parse_args()


def config_log(debug):
    if debug:
        logger.setLevel(logging.DEBUG)
    else:
        logger.setLevel(logging.INFO)

    logging.basicConfig(
        format="[%(levelname)s][%(asctime)s][%(lineno)d] %(message)s",
        datefmt="%H:%M:%S",
    )


def auto_parse_log_file(logfile):
    with open(logfile, errors="ignore") as f:
        dumps = []
        tmp_dmp = []
        start = False
        for line in f.readlines():
            line = line.strip()
            if len(line) == 0:
                continue

            if "up_dump_register" in line or "stack" in line:
                start = True
            else:
                if start:
                    start = False
                    dumps.append(tmp_dmp)
                    tmp_dmp = []
            if start:
                tmp_dmp.append(line)

        if start:
            dumps.append(tmp_dmp)

    terminal_width, _ = shutil.get_terminal_size()
    terminal_width = max(terminal_width - 4, 0)

    def get_one_line(lines):
        return "    ".join(lines[:2])[:terminal_width]

    if len(dumps) == 0:
        logger.error(f"Cannot find any dump in {logfile}, exiting...")
        sys.exit(1)

    if len(dumps) == 1:
        return dumps[0]

    for i in range(len(dumps)):
        print(f"{i}: {get_one_line(dumps[i])}")

    index_input = input("Dump number[0]: ").strip()
    if index_input == "":
        index_input = 0
    return dumps[int(index_input)]


def main(args):
    args.elffile = tuple(set(args.elffile))
    for name in args.elffile:
        if not os.path.isfile(name):
            logger.error(f"Cannot find file {name}, exiting...")
            sys.exit(1)

    if args.logfile:
        if not os.path.isfile(args.logfile):
            logger.error(f"Cannot find file {args.logfile}, exiting...")
            sys.exit(1)

    if not args.rawfile and not args.logfile and not args.coredump:
        logger.error("Must have a input file log or rawfile or coredump, exiting...")
        sys.exit(1)

    config_log(args.debug)
    elf = DumpELFFile(args.elffile[0])
    elf.parse()
    elf_texts = [elf.text()]
    for name in args.elffile[1:]:
        other = DumpELFFile(name)
        other.parse()
        elf_texts.append(other.text())
        elf.merge(other)

    if args.logfile is not None:
        selected_log = auto_parse_log_file(args.logfile)
        log = DumpLogFile(selected_log)
    else:
        log = DumpLogFile(None)

    if args.logfile is not None:
        if args.arch:
            log.parse(args.arch)
        elif elf.arch() in reg_table.keys():
            log.parse(elf.arch())
        else:
            logger.error("Architecture unknown, exiting...")
            sys.exit(2)
        elf.parse_addr2line(args.arch, args.addr2line, log.stack_data)

    raw = RawMemoryFile(args.rawfile)
    coredump = CoreDumpFile(args.coredump)
    gdb_stub = GDBStub(log, elf, raw, coredump, args.arch)

    gdbserver = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

    # Reuse address so we don't have to wait for socket to be
    # close before we can bind to the port again
    gdbserver.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)

    try:
        gdbserver.bind(("", args.port))
    except OSError:
        gdbserver.bind(("", 0))
        logger.info(
            f"Port {args.port} is already in use, using port {gdbserver.getsockname()[1]} instead."
        )
        args.port = gdbserver.getsockname()[1]

    gdbserver.listen(1)

    gdb_exec = "gdb" if not args.gdb else args.gdb

    gdb_init_cmd = ""
    if hasattr(args, "init_cmd"):
        if args.init_cmd is not None:
            gdb_init_cmd = args.init_cmd.strip()
        else:
            gdb_init_cmd = DEFAULT_GDB_INIT_CMD

    gdb_cmd = [
        f"{gdb_exec} {args.elffile[0]} -ex 'target remote localhost:{args.port}' "
        f"{gdb_init_cmd}"
    ]
    for i in range(len(elf_texts[1:])):
        name = args.elffile[1 + i]
        text = hex(elf_texts[1 + i])
        gdb_cmd.append(f"-ex 'add-symbol-file {name} {text}'")
    gdb_cmd = "".join(gdb_cmd)

    logger.info(f"Waiting GDB connection on port {args.port} ...")

    if not args.gdb:
        logger.info("Press Ctrl+C to stop ...")
        logger.info(f"Hint: {gdb_cmd}")
    else:
        logger.info(f"Run GDB command: {gdb_cmd}")

        def gdb_run(cmd):
            try:
                subprocess.run(cmd, shell=True)
            except KeyboardInterrupt:
                pass

        multiprocessing.Process(target=gdb_run, args=(gdb_cmd,)).start()

    while True:
        try:
            conn, remote = gdbserver.accept()

            if conn:
                logger.info(f"Accepted GDB connection from {remote}")
                gdb_stub.run(conn)
        except KeyboardInterrupt:
            break

    gdbserver.close()


if __name__ == "__main__":
    main(arg_parser())