/****************************************************************************
* drivers/mtd/mtd_partition.c
*
* Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <string.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/stat.h>
#include <nuttx/mtd/mtd.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/ioctl.h>
#ifdef CONFIG_FS_PROCFS
#include <nuttx/fs/procfs.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define PART_NAME_MAX 15
/****************************************************************************
* Private Types
****************************************************************************/
/* This type represents the state of the MTD device. The struct mtd_dev_s
* must appear at the beginning of the definition so that you can freely
* cast between pointers to struct mtd_dev_s and struct mtd_partition_s.
*/
struct mtd_partition_s
{
/* This structure must reside at the beginning so that we can simply cast
* from struct mtd_dev_s * to struct mtd_partition_s *
*/
struct mtd_dev_s child; /* The "child" MTD vtable that manages the
* sub-region */
/* Other implementation specific data may follow here */
FAR struct mtd_dev_s *parent; /* The "parent" MTD driver that manages the
* entire FLASH */
off_t firstblock; /* Offset to the first block of the managed
* sub-region */
off_t neraseblocks; /* The number of erase blocks in the managed
* sub-region */
off_t blocksize; /* The size of one read/write block */
uint16_t blkpererase; /* Number of R/W blocks in one erase block */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
struct mtd_partition_s *pnext; /* Pointer to next partition struct */
#endif
#ifdef CONFIG_MTD_PARTITION_NAMES
char name[PART_NAME_MAX + 1]; /* Name of the partition */
#endif
};
/* This structure describes one open "file" */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
struct part_procfs_file_s
{
struct procfs_file_s base; /* Base open file structure */
struct mtd_partition_s *nextpart;
};
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* MTD driver methods */
static int part_erase(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks);
static ssize_t part_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buf);
static ssize_t part_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buf);
static ssize_t part_read(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR uint8_t *buffer);
#ifdef CONFIG_MTD_BYTE_WRITE
static ssize_t part_write(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR const uint8_t *buffer);
#endif
static int part_ioctl(FAR struct mtd_dev_s *dev, int cmd,
unsigned long arg);
/* File system methods */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
static int part_procfs_open(FAR struct file *filep,
FAR const char *relpath, int oflags, mode_t mode);
static int part_procfs_close(FAR struct file *filep);
static ssize_t part_procfs_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static int part_procfs_dup(FAR const struct file *oldp,
FAR struct file *newp);
#if 0 /* Not implemented */
static int part_procfs_opendir(const char *relpath,
FAR struct fs_dirent_s *dir);
static int part_procfs_closedir(FAR struct fs_dirent_s *dir);
static int part_procfs_readdir(FAR struct fs_dirent_s *dir);
static int part_procfs_rewinddir(FAR struct fs_dirent_s *dir);
#endif
static int part_procfs_stat(FAR const char *relpath,
FAR struct stat *buf);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
static struct mtd_partition_s *g_pfirstpartition = NULL;
const struct procfs_operations part_procfsoperations =
{
part_procfs_open, /* open */
part_procfs_close, /* close */
part_procfs_read, /* read */
NULL, /* write */
part_procfs_dup, /* dup */
NULL, /* opendir */
NULL, /* closedir */
NULL, /* readdir */
NULL, /* rewinddir */
part_procfs_stat /* stat */
};
#endif
/****************************************************************************
* Name: part_blockcheck
*
* Description:
* Check if the provided block offset lies within the partition
*
****************************************************************************/
static bool part_blockcheck(FAR struct mtd_partition_s *priv, off_t block)
{
off_t partsize;
partsize = priv->neraseblocks * priv->blkpererase;
return block < partsize;
}
/****************************************************************************
* Name: part_bytecheck
*
* Description:
* Check if the provided byte offset lies within the partition
*
****************************************************************************/
static bool part_bytecheck(FAR struct mtd_partition_s *priv, off_t byoff)
{
off_t erasesize;
off_t readend;
erasesize = priv->blocksize * priv->blkpererase;
readend = (byoff + erasesize - 1) / erasesize;
return readend <= priv->neraseblocks;
}
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: part_erase
*
* Description:
* Erase several blocks, each of the size previously reported.
*
****************************************************************************/
static int part_erase(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
off_t eoffset;
DEBUGASSERT(priv);
/* Make sure that erase would not extend past the end of the partition */
if (!part_blockcheck(priv, (startblock + nblocks - 1) * priv->blkpererase))
{
ferr("ERROR: Erase beyond the end of the partition\n");
return -ENXIO;
}
/* Just add the partition offset to the requested block and let the
* underlying MTD driver perform the erase.
*
* NOTE: the offset here is in units of erase blocks.
*/
eoffset = priv->firstblock / priv->blkpererase;
DEBUGASSERT(eoffset * priv->blkpererase == priv->firstblock);
return priv->parent->erase(priv->parent, startblock + eoffset, nblocks);
}
/****************************************************************************
* Name: part_bread
*
* Description:
* Read the specified number of blocks into the user provided buffer.
*
****************************************************************************/
static ssize_t part_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buf)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
DEBUGASSERT(priv && (buf || nblocks == 0));
/* Make sure that read would not extend past the end of the partition */
if (!part_blockcheck(priv, startblock + nblocks - 1))
{
ferr("ERROR: Read beyond the end of the partition\n");
return -ENXIO;
}
/* Just add the partition offset to the requested block and let the
* underlying MTD driver perform the read.
*/
return priv->parent->bread(priv->parent, startblock + priv->firstblock,
nblocks, buf);
}
/****************************************************************************
* Name: part_bwrite
*
* Description:
* Write the specified number of blocks from the user provided buffer.
*
****************************************************************************/
static ssize_t part_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buf)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
DEBUGASSERT(priv && (buf || nblocks == 0));
/* Make sure that write would not extend past the end of the partition */
if (!part_blockcheck(priv, startblock + nblocks - 1))
{
ferr("ERROR: Write beyond the end of the partition\n");
return -ENXIO;
}
/* Just add the partition offset to the requested block and let the
* underlying MTD driver perform the write.
*/
return priv->parent->bwrite(priv->parent, startblock + priv->firstblock,
nblocks, buf);
}
/****************************************************************************
* Name: part_read
*
* Description:
* Read the specified number of bytes to the user provided buffer.
*
****************************************************************************/
static ssize_t part_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
FAR uint8_t *buffer)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
off_t newoffset;
DEBUGASSERT(priv && (buffer || nbytes == 0));
/* Does the underlying MTD device support the read method? */
if (priv->parent->read)
{
/* Make sure that read would not extend past the end of the partition */
if (!part_bytecheck(priv, offset + nbytes - 1))
{
ferr("ERROR: Read beyond the end of the partition\n");
return -ENXIO;
}
/* Just add the partition offset to the requested block and let the
* underlying MTD driver perform the read.
*/
newoffset = offset + priv->firstblock * priv->blocksize;
return priv->parent->read(priv->parent, newoffset, nbytes, buffer);
}
/* The underlying MTD driver does not support the read() method */
return -ENOSYS;
}
/****************************************************************************
* Name: part_write
****************************************************************************/
#ifdef CONFIG_MTD_BYTE_WRITE
static ssize_t part_write(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
FAR const uint8_t *buffer)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
off_t newoffset;
DEBUGASSERT(priv && (buffer || nbytes == 0));
/* Does the underlying MTD device support the write method? */
if (priv->parent->write)
{
/* Make sure that write would not extend past the end of the partition */
if (!part_bytecheck(priv, offset + nbytes - 1))
{
ferr("ERROR: Write beyond the end of the partition\n");
return -ENXIO;
}
/* Just add the partition offset to the requested block and let the
* underlying MTD driver perform the write.
*/
newoffset = offset + priv->firstblock * priv->blocksize;
return priv->parent->write(priv->parent, newoffset, nbytes, buffer);
}
/* The underlying MTD driver does not support the write() method */
return -ENOSYS;
}
#endif
/****************************************************************************
* Name: part_ioctl
****************************************************************************/
static int part_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)dev;
int ret = -EINVAL; /* Assume good command with bad parameters */
DEBUGASSERT(priv);
switch (cmd)
{
case MTDIOC_GEOMETRY:
{
FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)arg;
if (geo)
{
/* Populate the geometry structure with information needed to know
* the capacity and how to access the device.
*/
geo->blocksize = priv->blocksize;
geo->erasesize = priv->blocksize * priv->blkpererase;
geo->neraseblocks = priv->neraseblocks;
ret = OK;
}
}
break;
case MTDIOC_XIPBASE:
{
FAR void **ppv = (FAR void**)arg;
unsigned long base;
if (ppv)
{
/* Get hte XIP base of the entire FLASH */
ret = priv->parent->ioctl(priv->parent, MTDIOC_XIPBASE,
(unsigned long)((uintptr_t)&base));
if (ret == OK)
{
/* Add the offset of this partion to the XIP base and
* return the sum to the caller.
*/
*ppv = (FAR void *)(base + priv->firstblock * priv->blocksize);
}
}
}
break;
case MTDIOC_BULKERASE:
{
/* Erase the entire partition */
ret = priv->parent->erase(priv->parent,
priv->firstblock / priv->blkpererase,
priv->neraseblocks);
}
break;
default:
{
/* Pass any unhandled ioctl() calls to the underlying driver */
ret = priv->parent->ioctl(priv->parent, cmd, arg);
}
break;
}
return ret;
}
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
/****************************************************************************
* Name: part_procfs_open
****************************************************************************/
static int part_procfs_open(FAR struct file *filep, FAR const char *relpath,
int oflags, mode_t mode)
{
FAR struct part_procfs_file_s *attr;
finfo("Open '%s'\n", relpath);
/* PROCFS is read-only. Any attempt to open with any kind of write
* access is not permitted.
*
* REVISIT: Write-able proc files could be quite useful.
*/
if ((oflags & O_WRONLY) != 0 || (oflags & O_RDONLY) == 0)
{
ferr("ERROR: Only O_RDONLY supported\n");
return -EACCES;
}
/* Allocate a container to hold the task and attribute selection */
attr = (FAR struct part_procfs_file_s *)kmm_zalloc(sizeof(struct part_procfs_file_s));
if (!attr)
{
ferr("ERROR: Failed to allocate file attributes\n");
return -ENOMEM;
}
/* Initialize the file attributes */
attr->nextpart = g_pfirstpartition;
/* Save the index as the open-specific state in filep->f_priv */
filep->f_priv = (FAR void *)attr;
return OK;
}
/****************************************************************************
* Name: part_procfs_close
****************************************************************************/
static int part_procfs_close(FAR struct file *filep)
{
FAR struct part_procfs_file_s *attr;
/* Recover our private data from the struct file instance */
attr = (FAR struct part_procfs_file_s *)filep->f_priv;
DEBUGASSERT(attr);
/* Release the file attributes structure */
kmm_free(attr);
filep->f_priv = NULL;
return OK;
}
/****************************************************************************
* Name: part_procfs_read
****************************************************************************/
static ssize_t part_procfs_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct part_procfs_file_s *attr;
FAR struct mtd_geometry_s geo;
ssize_t total = 0;
ssize_t blkpererase;
ssize_t ret;
#ifdef CONFIG_MTD_PARTITION_NAMES
char partname[PART_NAME_MAX + 1];
FAR const char *ptr;
uint8_t x;
#endif
finfo("buffer=%p buflen=%d\n", buffer, (int)buflen);
/* Recover our private data from the struct file instance */
attr = (FAR struct part_procfs_file_s *)filep->f_priv;
DEBUGASSERT(attr);
/* If we are at the end of the list, then return 0 signifying the
* end-of-file. This also handles the special case when there are
* no registered MTD partitions.
*/
if (attr->nextpart)
{
/* Output a header before the first entry */
if (attr->nextpart == g_pfirstpartition)
{
#ifdef CONFIG_MTD_PARTITION_NAMES
total = snprintf(buffer, buflen, "%-*s Start Size MTD\n", PART_NAME_MAX, "Name");
#else
total = snprintf(buffer, buflen, " Start Size MTD\n");
#endif
}
/* Provide the requested data */
do
{
/* Get the geometry of the FLASH device */
ret = attr->nextpart->parent->ioctl(attr->nextpart->parent,
MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&geo));
if (ret < 0)
{
ferr("ERROR: mtd->ioctl failed: %d\n", ret);
return 0;
}
/* Get the number of blocks per erase. There must be an even number
* of blocks in one erase blocks.
*/
blkpererase = geo.erasesize / geo.blocksize;
/* Copy data from the next known partition */
#ifdef CONFIG_MTD_PARTITION_NAMES
ptr = attr->nextpart->name;
for (x = 0; x < sizeof(partname) - 1; x++)
{
/* Test for end of partition name */
if (*ptr == ',' || *ptr == '\0')
{
/* Perform space fill for alignment */
partname[x] = ' ';
}
else
{
/* Copy next byte of partition name */
partname[x] = *ptr++;
}
}
partname[x] = '\0';
/* Terminate the partition name and add to output buffer */
ret = snprintf(&buffer[total], buflen - total, "%s%7d %7d %s\n",
partname, attr->nextpart->firstblock / blkpererase,
attr->nextpart->neraseblocks, attr->nextpart->parent->name);
#else
ret = snprintf(&buffer[total], buflen - total, "%7d %7d %s\n",
attr->nextpart->firstblock / blkpererase,
attr->nextpart->neraseblocks, attr->nextpart->parent->name);
#endif
if (ret + total < buflen)
{
/* It fit in the buffer totally. Advance total and move to
* next partition.
*/
total += ret;
attr->nextpart = attr->nextpart->pnext;
}
else
{
/* This one didn't fit completely. Truncate the partial
* entry and break the loop.
*/
buffer[total] = '\0';
break;
}
}
while (attr->nextpart);
}
/* Update the file offset */
if (total > 0)
{
filep->f_pos += total;
}
return total;
}
/****************************************************************************
* Name: part_procfs_dup
*
* Description:
* Duplicate open file data in the new file structure.
*
****************************************************************************/
static int part_procfs_dup(FAR const struct file *oldp, FAR struct file *newp)
{
FAR struct part_procfs_file_s *oldattr;
FAR struct part_procfs_file_s *newattr;
finfo("Dup %p->%p\n", oldp, newp);
/* Recover our private data from the old struct file instance */
oldattr = (FAR struct part_procfs_file_s *)oldp->f_priv;
DEBUGASSERT(oldattr);
/* Allocate a new container to hold the task and attribute selection */
newattr = (FAR struct part_procfs_file_s *)kmm_zalloc(sizeof(struct part_procfs_file_s));
if (!newattr)
{
ferr("ERROR: Failed to allocate file attributes\n");
return -ENOMEM;
}
/* The copy the file attribtes from the old attributes to the new */
memcpy(newattr, oldattr, sizeof(struct part_procfs_file_s));
/* Save the new attributes in the new file structure */
newp->f_priv = (FAR void *)newattr;
return OK;
}
/****************************************************************************
* Name: part_procfs_stat
*
* Description: Return information about a file or directory
*
****************************************************************************/
static int part_procfs_stat(const char *relpath, struct stat *buf)
{
/* File/directory size, access block size */
buf->st_mode = S_IFREG | S_IROTH | S_IRGRP | S_IRUSR;
buf->st_size = 0;
buf->st_blksize = 0;
buf->st_blocks = 0;
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mtd_partition
*
* Description:
* Give an instance of an MTD driver, create a flash partition, ie.,
* another MTD driver instance that only operates with a sub-region of
* FLASH media. That sub-region is defined by a sector offset and a
* sector count (where the size of a sector is provided the by parent MTD
* driver).
*
* NOTE: Since there may be a number of MTD partition drivers operating on
* the same, underlying FLASH driver, that FLASH driver must be capable
* of enforcing mutually exclusive access to the FLASH device. Without
* partitions, that mutual exclusion would be provided by the file system
* above the FLASH driver.
*
* Input Parameters:
* mtd - The MTD device to be partitioned
* firstblock - The offset in bytes to the first block
* nblocks - The number of blocks in the partition
*
* Returned Value:
* On success, another MTD device representing the partition is returned.
* A NULL value is returned on a failure.
*
****************************************************************************/
FAR struct mtd_dev_s *mtd_partition(FAR struct mtd_dev_s *mtd, off_t firstblock,
off_t nblocks)
{
FAR struct mtd_partition_s *part;
FAR struct mtd_geometry_s geo;
unsigned int blkpererase;
off_t erasestart;
off_t eraseend;
off_t devblocks;
int ret;
DEBUGASSERT(mtd);
/* Get the geometry of the FLASH device */
ret = mtd->ioctl(mtd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&geo));
if (ret < 0)
{
ferr("ERROR: mtd->ioctl failed: %d\n", ret);
return NULL;
}
/* Get the number of blocks per erase. There must be an even number of
* blocks in one erase blocks.
*/
blkpererase = geo.erasesize / geo.blocksize;
DEBUGASSERT(blkpererase * geo.blocksize == geo.erasesize);
/* Adjust the offset and size if necessary so that they are multiples of
* the erase block size (making sure that we do not go outside of the
* requested sub-region). NOTE that 'eraseend' is the first erase block
* beyond the sub-region.
*/
erasestart = (firstblock + blkpererase - 1) / blkpererase;
eraseend = (firstblock + nblocks) / blkpererase;
if (erasestart >= eraseend)
{
ferr("ERROR: sub-region too small\n");
return NULL;
}
/* Verify that the sub-region is valid for this geometry */
devblocks = blkpererase * geo.neraseblocks;
if (eraseend > devblocks)
{
ferr("ERROR: sub-region too big\n");
return NULL;
}
/* Allocate a partition device structure */
part = (FAR struct mtd_partition_s *)kmm_zalloc(sizeof(struct mtd_partition_s));
if (!part)
{
ferr("ERROR: Failed to allocate memory for the partition device\n");
return NULL;
}
/* Initialize the partition device structure. (unsupported methods were
* nullified by kmm_zalloc).
*/
part->child.erase = part_erase;
part->child.bread = part_bread;
part->child.bwrite = part_bwrite;
part->child.read = mtd->read ? part_read : NULL;
part->child.ioctl = part_ioctl;
#ifdef CONFIG_MTD_BYTE_WRITE
part->child.write = mtd->write ? part_write : NULL;
#endif
part->child.name = "part";
part->parent = mtd;
part->firstblock = erasestart * blkpererase;
part->neraseblocks = eraseend - erasestart;
part->blocksize = geo.blocksize;
part->blkpererase = blkpererase;
#ifdef CONFIG_MTD_PARTITION_NAMES
strcpy(part->name, "(noname)");
#endif
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_PROCFS_EXCLUDE_PARTITIONS)
/* Add this partition to the list of known partitions */
if (g_pfirstpartition == NULL)
{
g_pfirstpartition = part;
}
else
{
struct mtd_partition_s *plast;
/* Add the partition to the end of the list */
part->pnext = NULL;
plast = g_pfirstpartition;
while (plast->pnext != NULL)
{
/* Get pointer to next partition */
plast = plast->pnext;
}
plast->pnext = part;
}
#endif
/* Return the implementation-specific state structure as the MTD device */
return &part->child;
}
/****************************************************************************
* Name: mtd_setpartitionname
*
* Description:
* Sets the name of the specified partition.
*
****************************************************************************/
#ifdef CONFIG_MTD_PARTITION_NAMES
int mtd_setpartitionname(FAR struct mtd_dev_s *mtd, FAR const char *name)
{
FAR struct mtd_partition_s *priv = (FAR struct mtd_partition_s *)mtd;
if (priv == NULL || name == NULL)
{
return -EINVAL;
}
/* Allocate space for the name */
strncpy(priv->name, name, sizeof(priv->name));
return OK;
}
#endif