/**************************************************************************** * drivers/audio/wm8904_debug.c * * Audio device driver for Wolfson Microelectronics WM8904 Audio codec. * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * References: * - "WM8904 Ultra Low Power CODEC for Portable Audio Applications, Pre- * Production", September 2012, Rev 3.3, Wolfson Microelectronics * * - The framework for this driver is based on Ken Pettit's VS1053 driver. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "wm8904.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ #ifdef CONFIG_WM8904_REGDUMP struct wb8904_regdump_s { FAR const char *regname; uint8_t regaddr; }; #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_WM8904_REGDUMP static const struct wb8904_regdump_s g_wm8904_debug[] = { {"ID", WM8904_ID }, {"BIAS_CTRL", WM8904_BIAS_CTRL }, {"VMID_CTRL", WM8904_VMID_CTRL }, {"MIC_BIAS_CTRL0", WM8904_MIC_BIAS_CTRL0 }, {"MIC_BIAS_CTRL1", WM8904_MIC_BIAS_CTRL1 }, {"ANALOG_ADC", WM8904_ANALOG_ADC }, {"PM0", WM8904_PM0 }, {"PM2", WM8904_PM2 }, {"PM3", WM8904_PM3 }, {"PM6", WM8904_PM6 }, {"CLKRATE0", WM8904_CLKRATE0 }, {"CLKRATE1", WM8904_CLKRATE1 }, {"CLKRATE2", WM8904_CLKRATE2 }, {"AIF0", WM8904_AIF0 }, {"AIF1", WM8904_AIF1 }, {"AIF2", WM8904_AIF2 }, {"AIF3", WM8904_AIF3 }, {"DAC_VOL_LEFT", WM8904_DAC_VOL_LEFT }, {"DAC_VOL_RIGHT", WM8904_DAC_VOL_RIGHT }, {"DAC_DIGI0", WM8904_DAC_DIGI0 }, {"DAC_DIGI1", WM8904_DAC_DIGI1 }, {"ADC_VOL_LEFT", WM8904_ADC_VOL_LEFT }, {"ADC_VOL_RIGHT", WM8904_ADC_VOL_RIGHT }, {"ADC_DIGI", WM8904_ADC_DIGI }, {"MIC_DIGI", WM8904_MIC_DIGI }, {"DRC0", WM8904_DRC0 }, {"DRC1", WM8904_DRC1 }, {"DRC2", WM8904_DRC2 }, {"DRC3", WM8904_DRC3 }, {"ANA_LEFT_IN0", WM8904_ANA_LEFT_IN0 }, {"ANA_RIGHT_IN0", WM8904_ANA_RIGHT_IN0 }, {"ANA_LEFT_IN1", WM8904_ANA_LEFT_IN1 }, {"ANA_RIGHT_IN1", WM8904_ANA_RIGHT_IN1 }, {"ANA_LEFT_OUT1", WM8904_ANA_LEFT_OUT1 }, {"ANA_RIGHT_OUT1", WM8904_ANA_RIGHT_OUT1 }, {"ANA_LEFT_OUT2", WM8904_ANA_LEFT_OUT2 }, {"ANA_RIGHT_OUT2", WM8904_ANA_RIGHT_OUT2 }, {"ANA_OUT12_ZC", WM8904_ANA_OUT12_ZC }, {"DC_SERVO0", WM8904_DC_SERVO0 }, {"DC_SERVO1", WM8904_DC_SERVO1 }, {"DC_SERVO2", WM8904_DC_SERVO2 }, {"DC_SERVO4", WM8904_DC_SERVO4 }, {"DC_SERVO5", WM8904_DC_SERVO5 }, {"DC_SERVO6", WM8904_DC_SERVO6 }, {"DC_SERVO7", WM8904_DC_SERVO7 }, {"DC_SERVO8", WM8904_DC_SERVO8 }, {"DC_SERVO9", WM8904_DC_SERVO9 }, {"DC_SERVO_RDBACK", WM8904_DC_SERVO_RDBACK }, {"ANA_HP0", WM8904_ANA_HP0 }, {"ANA_LINEOUT0", WM8904_ANA_LINEOUT0 }, {"CHG_PUMP0", WM8904_CHG_PUMP0 }, {"CLASS_W0", WM8904_CLASS_W0 }, {"WR_SEQ0", WM8904_WR_SEQ0 }, {"WR_SEQ1", WM8904_WR_SEQ1 }, {"WR_SEQ2", WM8904_WR_SEQ2 }, {"WR_SEQ3", WM8904_WR_SEQ3 }, {"WR_SEQ4", WM8904_WR_SEQ4 }, {"FLL_CTRL1", WM8904_FLL_CTRL1 }, {"FLL_CTRL2", WM8904_FLL_CTRL2 }, {"FLL_CTRL3", WM8904_FLL_CTRL3 }, {"FLL_CTRL4", WM8904_FLL_CTRL4 }, {"FLL_CTRL5", WM8904_FLL_CTRL5 }, {"GPIO_CTRL1", WM8904_GPIO_CTRL1 }, {"GPIO_CTRL2", WM8904_GPIO_CTRL2 }, {"GPIO_CTRL3", WM8904_GPIO_CTRL3 }, {"GPIO_CTRL4", WM8904_GPIO_CTRL4 }, {"DIGI_PULLS", WM8904_DIGI_PULLS }, {"INT_STATUS", WM8904_INT_STATUS }, {"INT_MASK", WM8904_INT_MASK }, {"INT_POL", WM8904_INT_POL }, {"INT_DEBOUNCE", WM8904_INT_DEBOUNCE }, {"EQ1", WM8904_EQ1 }, {"EQ2", WM8904_EQ2 }, {"EQ3", WM8904_EQ3 }, {"EQ4", WM8904_EQ4 }, {"EQ5", WM8904_EQ5 }, {"EQ6", WM8904_EQ6 }, {"EQ7", WM8904_EQ7 }, {"EQ8", WM8904_EQ8 }, {"EQ9", WM8904_EQ9 }, {"EQ10", WM8904_EQ10 }, {"EQ11", WM8904_EQ11 }, {"EQ12", WM8904_EQ12 }, {"EQ13", WM8904_EQ13 }, {"EQ14", WM8904_EQ14 }, {"EQ15", WM8904_EQ15 }, {"EQ16", WM8904_EQ16 }, {"EQ17", WM8904_EQ17 }, {"EQ18", WM8904_EQ18 }, {"EQ19", WM8904_EQ19 }, {"EQ20", WM8904_EQ20 }, {"EQ21", WM8904_EQ21 }, {"EQ22", WM8904_EQ22 }, {"EQ23", WM8904_EQ23 }, {"EQ24", WM8904_EQ24 }, {"ADC_TEST", WM8904_ADC_TEST }, {"FLL_NCO_TEST0", WM8904_FLL_NCO_TEST0 }, {"FLL_NCO_TEST1", WM8904_FLL_NCO_TEST1 } }; # define WM8904_NREGISTERS (sizeof(g_wm8904_debug)/sizeof(struct wb8904_regdump_s)) #endif /* CONFIG_WM8904_REGDUMP */ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: wm8904_dump_registers * * Description: * Dump the contents of all WM8904 registers to the syslog device * * Input Parameters: * dev - The device instance returned by wm8904_initialize * * Returned Value: * None. * ****************************************************************************/ #ifdef CONFIG_WM8904_REGDUMP void wm8904_dump_registers(FAR struct audio_lowerhalf_s *dev, FAR const char *msg) { int i; syslog(LOG_INFO, "WM8904 Registers: %s\n", msg); for (i = 0; i < WM8904_NREGISTERS; i++) { syslog(LOG_INFO, "%16s[%02x]: %04x\n", g_wm8904_debug[i].regname, g_wm8904_debug[i].regaddr, wm8904_readreg((FAR struct wm8904_dev_s *)dev, g_wm8904_debug[i].regaddr)); } } #endif /* CONFIG_WM8904_REGDUMP */ /**************************************************************************** * Name: wm8904_clock_analysis * * Description: * Analyze the settings in the clock chain and dump to syslog. * * Input Parameters: * dev - The device instance returned by wm8904_initialize * * Returned Value: * None. * ****************************************************************************/ #ifdef CONFIG_WM8904_CLKDEBUG void wm8904_clock_analysis(FAR struct audio_lowerhalf_s *dev, FAR const char *msg) { FAR struct wm8904_dev_s *priv = (FAR struct wm8904_dev_s *)dev; uint32_t sysclk; uint32_t bclk; uint32_t lrclk; uint16_t regval; unsigned int tmp; double ftmp; syslog(LOG_INFO, "WM8904 Clock Analysis: %s\n", msg); DEBUGASSERT(priv && priv->lower); syslog(LOG_INFO, " MCLK: %lu Hz\n", (unsigned long)priv->lower->mclk); /* Is the SYSCLK source the FLL? Or MCK? */ regval = wm8904_readreg(priv, WM8904_CLKRATE2); if ((regval & WM8904_SYSCLK_SRC) == WM8904_SYSCLK_SRCMCLK) { /* The SYSCLK divider bypasses the FLL and takes its input * directly from MCLK. */ sysclk = priv->lower->mclk; syslog(LOG_INFO, " SYSCLK Source: MCLK (%s)\n", (regval & WM8904_MCLK_INV) != 0 ? "inverted" : "not inverted"); } else { uint32_t fref; uint32_t fvco; uint32_t fout; unsigned int outdiv; unsigned int frndx; unsigned int flln; unsigned int fllk; unsigned int fratio; double nk; /* Assume that the Fref input to the FLL is MCLK */ fref = priv->lower->mclk; /* Now get the real FLL input source */ regval = wm8904_readreg(priv, WM8904_FLL_CTRL5); switch (regval & WM8904_FLL_CLK_REF_SRC_MASK) { case WM8904_FLL_CLK_REF_SRC_MCLK: syslog(LOG_INFO, " FLL Source: MCLK\n"); break; case WM8904_FLL_CLK_REF_SRC_BCLK: syslog(LOG_INFO, " ERROR: FLL source is BCLK: %04x\n", regval); break; case WM8904_FLL_CLK_REF_SRC_LRCLK: syslog(LOG_INFO, " ERROR: FLL source is LRCLK: %04x\n", regval); break; default: syslog(LOG_INFO, " ERROR: Unrecognized FLL source: %04x\n", regval); } syslog(LOG_INFO, " Fref: %lu Hz (before divider)\n", fref); switch (regval & WM8904_FLL_CLK_REF_DIV_MASK) { case WM8904_FLL_CLK_REF_DIV1: syslog(LOG_INFO, " FLL_CLK_REF_DIV: 1\n"); break; case WM8904_FLL_CLK_REF_DIV2: syslog(LOG_INFO, " FLL_CLK_REF_DIV: 2\n"); fref >>= 1; break; case WM8904_FLL_CLK_REF_DIV4: syslog(LOG_INFO, " FLL_CLK_REF_DIV: 4\n"); fref >>= 2; break; case WM8904_FLL_CLK_REF_DIV8: syslog(LOG_INFO, " FLL_CLK_REF_DIV: 8\n"); fref >>= 3; break; } syslog(LOG_INFO, " Fref: %lu Hz (after divider)\n", fref); regval = wm8904_readreg(priv, WM8904_FLL_CTRL2); frndx = (regval & WM8904_FLL_FRATIO_MASK) >> WM8904_FLL_FRATIO_SHIFT; tmp = (regval & WM8904_FLL_CTRL_RATE_MASK) >> WM8904_FLL_CTRL_RATE_SHIFT; outdiv = ((regval & WM8904_FLL_OUTDIV_MASK) >> WM8904_FLL_OUTDIV_SHIFT) + 1; syslog(LOG_INFO, " FLL_CTRL_RATE: Fvco / %u\n", tmp + 1); regval = wm8904_readreg(priv, WM8904_FLL_CTRL4); flln = (regval & WM8904_FLL_N_MASK) >> WM8904_FLL_N_SHIFT; tmp = (regval & WM8904_FLL_GAIN_MASK) >> WM8904_FLL_GAIN_SHIFT; syslog(LOG_INFO, " FLL_GAIN: %u\n", (1 << tmp)); fllk = wm8904_readreg(priv, WM8904_FLL_CTRL3); nk = (double)flln + ((double)fllk / 65536.0); fratio = g_fllratio[frndx]; syslog(LOG_INFO, " FLL_FRATIO: %u\n", fratio); syslog(LOG_INFO, " FLL_OUTDIV: %u\n", outdiv); syslog(LOG_INFO, " FLL_N.K: %u.%05u\n", flln, fllk); ftmp = nk * (double)fref * (double)fratio; fvco = (uint32_t)ftmp; syslog(LOG_INFO, " Fvco: %lu Hz\n", (unsigned long)fvco); fout = fvco / outdiv; syslog(LOG_INFO, " Fout: %lu Hz\n", (unsigned long)fout); regval = wm8904_readreg(priv, WM8904_FLL_CTRL1); syslog(LOG_INFO, " FLL_FRACN_ENA: %s\n", (regval & WM8904_FLL_FRACN_ENA) != 0 ? "Enabled" : "Disabled"); syslog(LOG_INFO, " FLL_OSC_ENA: %s\n", (regval & WM8904_FLL_OSC_ENA) != 0 ? "Enabled" : "Disabled"); syslog(LOG_INFO, " FLL_ENA: %s\n", (regval & WM8904_FLL_ENA) != 0 ? "Enabled" : "Disabled"); if ((regval & WM8904_FLL_ENA) == 0) { syslog(LOG_INFO, " No SYSCLK\n"); return; } sysclk = fout; } syslog(LOG_INFO, " SYSCLK: %lu Hz (before divider)\n", (unsigned long)sysclk); regval = wm8904_readreg(priv, WM8904_CLKRATE0); if ((regval & WM8904_MCLK_DIV) == WM8904_MCLK_DIV1) { syslog(LOG_INFO, " MCLK_DIV: 1\n"); } else { syslog(LOG_INFO, " MCLK_DIV: 2\n"); sysclk >>= 1; } syslog(LOG_INFO, " SYSCLK: %lu (after divider)\n", (unsigned long)sysclk); regval = wm8904_readreg(priv, WM8904_CLKRATE2); syslog(LOG_INFO, " CLK_SYS_ENA: %s\n", (regval & WM8904_CLK_SYS_ENA) != 0 ? "Enabled" : "Disabled"); if ((regval & WM8904_CLK_SYS_ENA) == 0) { syslog(LOG_INFO, " No SYSCLK\n"); return; } regval = wm8904_readreg(priv, WM8904_AIF2); tmp = (regval & WM8904_BCLK_DIV_MASK) >> WM8904_BCLK_DIV_SHIFT; tmp = g_sysclk_scaleb1[tmp]; ftmp = (double)tmp / 2.0; syslog(LOG_INFO, " BCLK_DIV: SYSCLK / %u.%01u\n", (unsigned int)(tmp >> 1), (unsigned int)(5 * (tmp & 1))); bclk = (uint32_t)(sysclk / ftmp); syslog(LOG_INFO, " BCLK: %lu Hz\n", (unsigned long)bclk); regval = wm8904_readreg(priv, WM8904_AIF1); syslog(LOG_INFO, " BCLK_DIR: %s\n", (regval & WM8904_BCLK_DIR) != 0 ? "Output" : "Input"); regval = wm8904_readreg(priv, WM8904_AIF3); tmp = (regval & WM8904_LRCLK_RATE_MASK) >> WM8904_LRCLK_RATE_SHIFT; lrclk = bclk / tmp; syslog(LOG_INFO, " LRCLK_RATE: BCLK / %lu\n", (unsigned long)tmp); syslog(LOG_INFO, " LRCLK: %lu Hz\n", (unsigned long)lrclk); syslog(LOG_INFO, " LRCLK_DIR: %s\n", (regval & WM8904_LRCLK_DIR) != 0 ? "Output" : "Input"); } #endif /* CONFIG_WM8904_CLKDEBUG */