/************************************************************************************ * configs/open1788/src/lpc17_sdraminitialize.c * arch/arm/src/board/lpc17_sdraminitialize.c * * Copyright (C) 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ /************************************************************************************ * Included Files ************************************************************************************/ #include #include #include #include #include "up_arch.h" #include "up_internal.h" #include "chip/lpc17_syscon.h" #include "lpc17_emc.h" #include "open1788.h" #if defined(CONFIG_LPC17_EMC) && defined(CONFIG_LPC17_EXTDRAM) /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* The core clock is LPC17_EMCCLK which may be either LPC17_CCLK* (undivided), or * LPC17_CCLK / 2 as determined by settings in the board.h header file. * * For example: * LPC17_CCLCK = 120,000,000 * EMCCLKSEL -> LPC17_CCLK divided by 2 * LPC17_EMCCLK = 60,000,000 * LPC17_EMCCLK_MHZ = 60 (Rounded to an integer) * EMC_NSPERCLK = 16.667 (Represented with 4 bits of fraction, 267) * * EMC_NS2CLK(63) = ((63 << 4) + 266) / 267 = 4 (actual 3.78) * EMC_NS2CLK(20) = ((20 << 4) + 266) / 267 = 2 (actual 1.20) */ #define LPC17_EMCCLK_MHZ ((LPC17_EMCCLK + 500000) / 1000000) #define EMC_NSPERCLK_B4 (((1000 << 4) + (LPC17_EMCCLK_MHZ >> 1)) / LPC17_EMCCLK_MHZ) #define EMC_NS2CLK(ns) (((ns << 4) + (EMC_NSPERCLK_B4 - 1)) / EMC_NSPERCLK_B4) #define MDKCFG_RASCAS0VAL 0x00000303 /* Set up for 32-bit SDRAM at CS0 */ #ifdef CONFIG_LPC17_EXTDRAMSIZE # define SDRAM_SIZE CONFIG_LPC17_EXTDRAMSIZE #endif #ifdef CONFIG_LPC17_SDRAM_16BIT # ifndef SDRAM_SIZE # define SDRAM_SIZE 0x02000000 /* 256Mbit */ # endif #else /* if defined(CONFIG_LPC17_SDRAM_32BIT) */ # undef CONFIG_LPC17_SDRAM_32BIT # define CONFIG_LPC17_SDRAM_32BIT 1 # ifndef SDRAM_SIZE # define SDRAM_SIZE 0x04000000 /* 512Mbit */ # endif #endif #define SDRAM_BASE 0xa0000000 /* CS0 */ /************************************************************************************ * Private Functions ************************************************************************************/ /************************************************************************************ * Public Functions ************************************************************************************/ /************************************************************************************ * Name: open1788_sdram_initialize * * Description: * Initialize SDRAM * ************************************************************************************/ void open1788_sdram_initialize(void) { uint32_t regval; int i; /* Reconfigure delays: * * CMDDLY: Programmable delay value for EMC outputs in command delayed * mode. The delay amount is roughly CMDDLY * 250 picoseconds. * FBCLKDLY: Programmable delay value for the feedback clock that controls * input data sampling. The delay amount is roughly (FBCLKDLY+1) * 250 * picoseconds. * CLKOUT0DLY: Programmable delay value for the CLKOUT0 output. This would * typically be used in clock delayed mode. The delay amount is roughly * (CLKOUT0DLY+1) * 250 picoseconds. * CLKOUT1DLY: Programmable delay value for the CLKOUT1 output. This would * typically be used in clock delayed mode. The delay amount is roughly * (CLKOUT1DLY+1) * 250 picoseconds. */ regval = SYSCON_EMCDLYCTL_CMDDLY(32) | SYSCON_EMCDLYCTL_FBCLKDLY(32) | SYSCON_EMCDLYCTL_CLKOUT0DLY(1) | SYSCON_EMCDLYCTL_CLKOUT1DLY(1); putreg32(regval, LPC17_SYSCON_EMCDLYCTL); /* Configure the SDRAM */ putreg32( EMC_NS2CLK(20), LPC17_EMC_DYNAMICRP); /* TRP = 20 nS */ putreg32( 15, LPC17_EMC_DYNAMICRAS); /* RAS = 42ns to 100K ns, */ putreg32( 0, LPC17_EMC_DYNAMICSREX); /* TSREX = 1 clock */ putreg32( 1, LPC17_EMC_DYNAMICAPR); /* TAPR = 2 clocks? */ putreg32(EMC_NS2CLK(20) + 2, LPC17_EMC_DYNAMICDAL); /* TDAL = TRP + TDPL = 20ns + 2clk */ putreg32( 1, LPC17_EMC_DYNAMICWR); /* TWR = 2 clocks */ putreg32( EMC_NS2CLK(63), LPC17_EMC_DYNAMICRC); /* H57V2562GTR-75C TRC = 63ns(min)*/ putreg32( EMC_NS2CLK(63), LPC17_EMC_DYNAMICRFC); /* H57V2562GTR-75C TRFC = TRC */ putreg32( 15, LPC17_EMC_DYNAMICXSR); /* Exit self-refresh to active */ putreg32( EMC_NS2CLK(63), LPC17_EMC_DYNAMICRRD); /* 3 clock, TRRD = 15ns (min) */ putreg32( 1, LPC17_EMC_DYNAMICMRD); /* 2 clock, TMRD = 2 clocks (min) */ /* Command delayed strategy, using EMCCLKDELAY */ putreg32(EMC_DYNAMICREADCONFIG_RD_CMD, LPC17_EMC_DYNAMICREADCONFIG); /* H57V2562GTR-75C: TCL=3CLK, TRCD = 20ns(min), 3 CLK = 24ns */ putreg32(MDKCFG_RASCAS0VAL, LPC17_EMC_DYNAMICRASCAS0); #ifdef CONFIG_LPC17_SDRAM_16BIT /* For Manley lpc1778 SDRAM: H57V2562GTR-75C, 256Mb, 16Mx16, 4 banks, row=13, column=9: * * 256Mb, 16Mx16, 4 banks, row=13, column=9, RBC */ putreg32(EMC_DYNAMICCONFIG_MD_SDRAM | EMC_DYNAMICCONFIG_AM0(13), LPC17_EMC_DYNAMICCONFIG0); #elif defined CONFIG_LPC17_SDRAM_32BIT /* 256Mb, 16Mx16, 4 banks, row=13, column=9, RBC */ putreg32(EMC_DYNAMICCONFIG_MD_SDRAM | EMC_DYNAMICCONFIG_AM0(13) | EMC_DYNAMICCONFIG_AM1, LPC17_EMC_DYNAMICCONFIG0); #endif up_mdelay(100); /* Issue NOP command */ putreg32(EMC_DYNAMICCONTROL_CE | EMC_DYNAMICCONTROL_CS | EMC_DYNAMICCONTROL_I_NOP, LPC17_EMC_DYNAMICCONTROL); /* Wait 200 Msec */ up_mdelay(200); /* Issue PALL command */ putreg32(EMC_DYNAMICCONTROL_CE | EMC_DYNAMICCONTROL_CS | EMC_DYNAMICCONTROL_I_PALL, LPC17_EMC_DYNAMICCONTROL); putreg32(2, LPC17_EMC_DYNAMICREFRESH); /* ( n * 16 ) -> 32 clock cycles */ /* Wait 128 AHB clock cycles */ for (i = 0; i < 128; i++); /* 64ms/8192 = 7.8125us, nx16x8.33ns < 7.8125us, n < 58.6*/ regval = 64000000 / (1 << 13); regval -= 16; regval >>= 4; regval = regval * LPC17_EMCCLK_MHZ / 1000; putreg32(regval, LPC17_EMC_DYNAMICREFRESH); /* Issue MODE command */ putreg32(EMC_DYNAMICCONTROL_CE | EMC_DYNAMICCONTROL_CS | EMC_DYNAMICCONTROL_I_MODE, LPC17_EMC_DYNAMICCONTROL); #ifdef CONFIG_LPC17_SDRAM_16BIT (void)getreg16(SDRAM_BASE | (0x33 << 12)); /* 8 burst, 3 CAS latency */ #elif defined CONFIG_LPC17_SDRAM_32BIT (void)getreg32(SDRAM_BASE | (0x32 << 13)); /* 4 burst, 3 CAS latency */ #endif /* Issue NORMAL command */ putreg32(EMC_DYNAMICCONTROL_I_NORMAL, LPC17_EMC_DYNAMICCONTROL); /* Enable buffer */ regval = getreg32(LPC17_EMC_DYNAMICCONFIG0); regval |= EMC_DYNAMICCONFIG_B; putreg32(regval, LPC17_EMC_DYNAMICCONFIG0); up_mdelay(12); regval = getreg32(LPC17_SYSCON_EMCDLYCTL); regval &= ~SYSCON_EMCDLYCTL_CMDDLY_MASK; regval |= SYSCON_EMCDLYCTL_CMDDLY(18); putreg32(regval, LPC17_SYSCON_EMCDLYCTL); } #endif /* CONFIG_LPC17_EMC && CONFIG_LPC17_EXTDRAM */