/**************************************************************************** * sched/signal/sig/nanosleep.c * * Copyright (C) 2013, 2016-2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "clock/clock.h" /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxsig_nanosleep * * Description: * The nxsig_nanosleep() function causes the current thread to be * suspended from execution until either the time interval specified by * the rqtp argument has elapsed or a signal is delivered to the calling * thread and its action is to invoke a signal-catching function or to * terminate the process. The suspension time may be longer than requested * because the argument value is rounded up to an integer multiple of the * sleep resolution or because of the scheduling of other activity by the * system. But, except for the case of being interrupted by a signal, the * suspension time will not be less than the time specified by rqtp, as * measured by the system clock, CLOCK_REALTIME. * * The use of the nxsig_nanosleep() function has no effect on the action * or blockage of any signal. * * Input Parameters: * rqtp - The amount of time to be suspended from execution. * rmtp - If the rmtp argument is non-NULL, the timespec structure * referenced by it is updated to contain the amount of time * remaining in the interval (the requested time minus the time * actually slept) * * Returned Value: * If the nxsig_nanosleep() function returns because the requested time * has elapsed, its return value is zero. * * If the nxsig_nanosleep() function returns because it has been * interrupted by a signal, the function returns a negated errno value * indicate the interruption. If the rmtp argument is non-NULL, the * timespec structure referenced by it is updated to contain the amount * of time remaining in the interval (the requested time minus the time * actually slept). If the rmtp argument is NULL, the remaining time is * not returned. * * If nxsig_nanosleep() fails, it returns a negated errno indicating the * cause of the failure. The nxsig_nanosleep() function will fail if: * * EINTR - The nxsig_nanosleep() function was interrupted by a signal. * EINVAL - The rqtp argument specified a nanosecond value less than * zero or greater than or equal to 1000 million. * ENOSYS - The nxsig_nanosleep() function is not supported by this * implementation. * ****************************************************************************/ int nxsig_nanosleep(FAR const struct timespec *rqtp, FAR struct timespec *rmtp) { irqstate_t flags; clock_t starttick; sigset_t set; int ret; /* Sanity check */ if (rqtp == NULL || rqtp->tv_nsec < 0 || rqtp->tv_nsec >= 1000000000) { return -EINVAL; } /* Get the start time of the wait. Interrupts are disabled to prevent * timer interrupts while we do tick-related calculations before and * after the wait. */ flags = enter_critical_section(); starttick = clock_systimer(); /* Set up for the sleep. Using the empty set means that we are not * waiting for any particular signal. However, any unmasked signal can * still awaken nxsig_timedwait(). */ sigemptyset(&set); /* nxsig_nanosleep is a simple application of nxsig_timedwait. */ ret = nxsig_timedwait(&set, NULL, rqtp); /* nxsig_timedwait() cannot succeed. It should always return error with * either (1) EAGAIN meaning that the timeout occurred, or (2) EINTR * meaning that some other unblocked signal was caught. */ if (ret == -EAGAIN) { /* The timeout "error" is the normal, successful result */ leave_critical_section(flags); return OK; } /* If we get there, the wait has failed because we were awakened by a * signal. Return the amount of "unwaited" time if rmtp is non-NULL. */ if (rmtp) { clock_t elapsed; clock_t remaining; sclock_t ticks; /* REVISIT: The conversion from time to ticks and back could * be avoided. clock_timespec_subtract() would be used instead * to get the time difference. */ /* First get the number of clock ticks that we were requested to * wait. */ clock_time2ticks(rqtp, &ticks); /* Get the number of ticks that we actually waited */ elapsed = clock_systimer() - starttick; /* The difference between the number of ticks that we were requested * to wait and the number of ticks that we actually waited is that * amount of time that we failed to wait. */ if (elapsed >= (clock_t)ticks) { remaining = 0; } else { remaining = (clock_t)ticks - elapsed; } clock_ticks2time((sclock_t)remaining, rmtp); } leave_critical_section(flags); return ret; } /**************************************************************************** * Name: clock_nanosleep * * Description: * If the flag TIMER_ABSTIME is not set in the flags argument, the * clock_nanosleep() function will cause the current thread to be suspended * from execution until either the time interval specified by the rqtp * argument has elapsed, or a signal is delivered to the calling thread * and its action is to invoke a signal-catching function, or the process * is terminated. The clock used to measure the time will be the clock * specified by clock_id. * * If the flag TIMER_ABSTIME is set in the flags argument, the * clock_nanosleep() function will cause the current thread to be * suspended from execution until either the time value of the clock * specified by clock_id reaches the absolute time specified by the rqtp * argument, or a signal is delivered to the calling thread and its action * is to invoke a signal-catching function, or the process is terminated. If, * at the time of the call, the time value specified by rqtp is less than * or equal to the time value of the specified clock, then clock_nanosleep() * will return immediately and the calling process will not be suspended. * * The suspension time caused by this function may be longer than requested * because the argument value is rounded up to an integer multiple of the * sleep resolution, or because of the scheduling of other activity by the * system. But, except for the case of being interrupted by a signal, the * suspension time for the relative clock_nanosleep() function (that is, * with the TIMER_ABSTIME flag not set) will not be less than the time * interval specified by rqtp, as measured by the corresponding clock. The * suspension for the absolute clock_nanosleep() function (that is, with * the TIMER_ABSTIME flag set) will be in effect at least until the value * of the corresponding clock reaches the absolute time specified by rqtp, * except for the case of being interrupted by a signal. * * The use of the clock_nanosleep() function will have no effect on the * action or blockage of any signal. * * The clock_nanosleep() function will fail if the clock_id argument refers * to the CPU-time clock of the calling thread. It is unspecified whether * clock_id values of other CPU-time clocks are allowed. * * Input Parameters: * clockid - The clock to use to interpret the absolute time * flags - Open flags. TIMER_ABSTIME is the only supported flag. * rqtp - The amount of time to be suspended from execution. * rmtp - If the rmtp argument is non-NULL, the timespec structure * referenced by it is updated to contain the amount of time * remaining in the interval (the requested time minus the time * actually slept) * * Returned Value: * If the clock_nanosleep() function returns because the requested time has * elapsed, its return value is zero. * * If the clock_nanosleep() function returns because it has been interrupted by * a signal, the function returns a value of -1 and sets errno to indicate * the interruption. If the rmtp argument is non-NULL, the timespec * structure referenced by it is updated to contain the amount of time * remaining in the interval (the requested time minus the time actually * slept). If the rmtp argument is NULL, the remaining time is not * returned. * * If clock_nanosleep() fails, it returns a value of -1 and sets errno to * indicate the error. The clock_nanosleep() function will fail if: * * EINTR - The clock_nanosleep() function was interrupted by a signal. * EINVAL - The rqtp argument specified a nanosecond value less than * zero or greater than or equal to 1000 million. * ENOSYS - The clock_nanosleep() function is not supported by this * implementation. * ****************************************************************************/ int clock_nanosleep(clockid_t clockid, int flags, FAR const struct timespec *rqtp, FAR struct timespec *rmtp) { int ret; /* clock_nanosleep() is a cancellation point */ enter_cancellation_point(); /* Check if absolute time is selected */ if ((flags & TIMER_ABSTIME) != 0) { struct timespec reltime; struct timespec now; irqstate_t irqstate; /* Calculate the relative time delay. We need to enter a critical * section early to assure the relative time is valid from this * point in time. */ irqstate = enter_critical_section(); ret = clock_gettime(clockid, &now); if (ret < 0) { /* clock_gettime() sets the errno variable */ leave_critical_section(irqstate); leave_cancellation_point(); return ERROR; } clock_timespec_subtract(rqtp, &now, &reltime); /* Now that we have the relative time, the remaining operations * are equivalent to nxsig_nanosleep(). */ ret = nxsig_nanosleep(&reltime, rmtp); leave_critical_section(irqstate); } else { /* In the relative time case, clock_nanosleep() is equivalent to * nanosleep. In this case, it is a paper thin wrapper around * nxsig_nanosleep(). */ ret = nxsig_nanosleep(rqtp, rmtp); } /* Check if nxsig_nanosleep() succeeded */ if (ret < 0) { /* If not set the errno variable and return -1 */ set_errno(-ret); ret = ERROR; } leave_cancellation_point(); return ret; }