/**************************************************************************** * drivers/wireless/ieee802154/mrf24j40/mrf24j40_getset.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include "mrf24j40.h" #include "mrf24j40_reg.h" #include "mrf24j40_regops.h" #include "mrf24j40_getset.h" /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void mrf24j40_resetrfsm(FAR struct mrf24j40_radio_s *dev); /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mrf24j40_resetrfsm * * Description: * Reset the RF state machine. Required at boot, after channel change, * and probably after PA settings. * ****************************************************************************/ static void mrf24j40_resetrfsm(FAR struct mrf24j40_radio_s *dev) { uint8_t reg; reg = mrf24j40_getreg(dev->spi, MRF24J40_RFCTL); reg |= 0x04; mrf24j40_setreg(dev->spi, MRF24J40_RFCTL, reg); reg &= ~0x04; mrf24j40_setreg(dev->spi, MRF24J40_RFCTL, reg); up_udelay(200); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mrf24j40_setrxmode * * Description: * Set the RX mode (normal, promiscuous, no CRC) * ****************************************************************************/ int mrf24j40_setrxmode(FAR struct mrf24j40_radio_s *dev, int mode) { uint8_t reg; if (mode < MRF24J40_RXMODE_NORMAL || mode > MRF24J40_RXMODE_NOCRC) { return -EINVAL; } reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR); reg &= ~0x03; reg |= mode; /* Set mode options */ if (mode != MRF24J40_RXMODE_NORMAL) { /* Promisc and error modes: Disable auto ACK */ reg |= MRF24J40_RXMCR_NOACKRSP; } else { /* Normal mode : enable auto-ACK */ reg &= ~MRF24J40_RXMCR_NOACKRSP; } mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg); dev->rxmode = mode; wlinfo("%u\n", (unsigned)mode); return OK; } /**************************************************************************** * Name: mrf24j40_setchannel * * Description: * Define the current radio channel the device is operating on. * In the 2.4 GHz, there are 16 channels, each 2 MHz wide, 5 MHz spacing: * Chan MHz Chan MHz Chan MHz Chan MHz * 11 2405 15 2425 19 2445 23 2465 * 12 2410 16 2430 20 2450 24 2470 * 13 2415 17 2435 21 2455 25 2475 * 14 2420 18 2440 22 2460 26 2480 * ****************************************************************************/ int mrf24j40_setchannel(FAR struct mrf24j40_radio_s *dev, uint8_t chan) { if (chan < 11 || chan > 26) { wlerr("ERROR: Invalid chan: %d\n", chan); return -EINVAL; } /* 15. Set channel - See Section 3.4 "Channel Selection". */ mrf24j40_setreg(dev->spi, MRF24J40_RFCON0, (chan - 11) << 4 | 0x03); /* 17. RFCTL (0x36) = 0x04 - Reset RF state machine. * 18. RFCTL (0x36) = 0x00. */ mrf24j40_resetrfsm(dev); dev->chan = chan; wlinfo("%u\n", (unsigned)chan); return OK; } /**************************************************************************** * Name: mrf24j40_setpanid * * Description: * Define the PAN ID the device is operating on. * ****************************************************************************/ int mrf24j40_setpanid(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *panid) { mrf24j40_setreg(dev->spi, MRF24J40_PANIDL, panid[0]); mrf24j40_setreg(dev->spi, MRF24J40_PANIDH, panid[1]); IEEE802154_PANIDCOPY(dev->addr.panid, panid); wlinfo("%02X:%02X\n", panid[0], panid[1]); return OK; } /**************************************************************************** * Name: mrf24j40_setsaddr * * Description: * Define the device short address. The following addresses are special: * FFFEh : Broadcast * FFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setsaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *saddr) { mrf24j40_setreg(dev->spi, MRF24J40_SADRL, saddr[0]); mrf24j40_setreg(dev->spi, MRF24J40_SADRH, saddr[1]); IEEE802154_SADDRCOPY(dev->addr.saddr, saddr); wlinfo("%02X:%02X\n", saddr[0], saddr[1]); return OK; } /**************************************************************************** * Name: mrf24j40_seteaddr * * Description: * Define the device extended address. The following addresses are special: * ffffffffffffffffh : Unspecified * ****************************************************************************/ int mrf24j40_seteaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *eaddr) { int i; for (i = 0; i < 8; i++) { mrf24j40_setreg(dev->spi, MRF24J40_EADR0 + i, eaddr[i]); dev->addr.eaddr[i] = eaddr[i]; } wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1], eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]); return OK; } /**************************************************************************** * Name: mrf24j40_setcoordsaddr * * Description: * Define the coordinator short address. The following addresses are * special: * * FFFEh : Broadcast * FFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setcoordsaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *saddr) { mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR0, saddr[0]); mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR1, saddr[1]); IEEE802154_SADDRCOPY(dev->addr.saddr, saddr); wlinfo("%02X:%02X\n", saddr[0], saddr[1]); return OK; } /**************************************************************************** * Name: mrf24j40_setcoordeaddr * * Description: * Define the coordinator extended address. The following addresses are * special: * * FFFFFFFFFFFFFFFFh : Unspecified * ****************************************************************************/ int mrf24j40_setcoordeaddr(FAR struct mrf24j40_radio_s *dev, FAR const uint8_t *eaddr) { int i; for (i = 0; i < 8; i++) { mrf24j40_setreg(dev->spi, MRF24J40_ASSOEADR0 + i, eaddr[i]); dev->addr.eaddr[i] = eaddr[i]; } wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1], eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]); return OK; } /**************************************************************************** * Name: mrf24j40_setdevmode * * Description: * Define the device behaviour: normal end device or coordinator * ****************************************************************************/ int mrf24j40_setdevmode(FAR struct mrf24j40_radio_s *dev, uint8_t mode) { uint8_t reg; /* Define dev mode */ reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR); if (mode == MRF24J40_MODE_PANCOORD) { reg |= MRF24J40_RXMCR_PANCOORD; reg &= ~MRF24J40_RXMCR_COORD; } else if (mode == MRF24J40_MODE_COORD) { reg |= MRF24J40_RXMCR_COORD; reg &= ~MRF24J40_RXMCR_PANCOORD; } else if (mode == MRF24J40_MODE_DEVICE) { reg &= ~MRF24J40_RXMCR_PANCOORD; reg &= ~MRF24J40_RXMCR_COORD; } else { return -EINVAL; } mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg); dev->devmode = mode; return OK; } /**************************************************************************** * Name: mrf24j40_settxpower * * Description: * Define the transmit power. Value is passed in mBm, it is rounded to * the nearest value. Some MRF modules have a power amplifier, this routine * does not care about this. We only change the CHIP output power. * ****************************************************************************/ int mrf24j40_settxpower(FAR struct mrf24j40_radio_s *dev, int32_t txpwr) { uint8_t reg; int save_txpwr = txpwr; if (txpwr <= -3000 && txpwr > -3630) { reg = 0xc0; txpwr += 3000; } else if (txpwr <= -2000) { reg = 0x80; txpwr += 2000; } else if (txpwr <= -1000) { reg = 0x40; txpwr += 1000; } else if (txpwr <= 0) { reg = 0x00; } else { return -EINVAL; } wlinfo("Remaining attenuation: %" PRId32 " mBm\n", txpwr); switch (txpwr / 100) { case -9: case -8: case -7: case -6: reg |= 0x07; break; case -5: reg |= 0x06; break; case -4: reg |= 0x05; break; case -3: reg |= 0x04; break; case -2: reg |= 0x03; break; case -1: reg |= 0x02; break; case 0: reg |= 0x00; /* value 0x01 is 0.5 db, not used */ break; default: return -EINVAL; } mrf24j40_setreg(dev->spi, MRF24J40_RFCON3, reg); dev->txpower = save_txpwr; return OK; } /**************************************************************************** * Name: mrf24j40_setcca * * Description: * Define the Clear Channel Assessement method. * ****************************************************************************/ int mrf24j40_setcca(FAR struct mrf24j40_radio_s *dev, FAR struct ieee802154_cca_s *cca) { uint8_t mode; if (!cca->use_ed && !cca->use_cs) { return -EINVAL; } if (cca->use_cs && cca->csth > 0x0f) { return -EINVAL; } mode = mrf24j40_getreg(dev->spi, MRF24J40_BBREG2); mode &= 0x03; if (cca->use_ed) { mode |= MRF24J40_BBREG2_CCAMODE_ED; mrf24j40_setreg(dev->spi, MRF24J40_CCAEDTH, cca->edth); } if (cca->use_cs) { mode |= MRF24J40_BBREG2_CCAMODE_CS; mode |= cca->csth << 2; } mrf24j40_setreg(dev->spi, MRF24J40_BBREG2, mode); memcpy(&dev->cca, cca, sizeof(struct ieee802154_cca_s)); return OK; } /**************************************************************************** * Name: mrf24j40_setpamode * * Description: * Control the external LNA/PA on the MRF24J40MB/MC/MD/ME modules * GPIO 1: PA enable * GPIO 2: LNA enable * GPIO 3: PA power enable (not required on MB) ****************************************************************************/ int mrf24j40_setpamode(FAR struct mrf24j40_radio_s *dev, int mode) { if (!dev->paenabled) { return OK; } if (mode == MRF24J40_PA_AUTO) { mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x08); mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x08); mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x0f); } else if (mode == MRF24J40_PA_ED) { mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x08); mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x0f); mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x0c); } else if (mode == MRF24J40_PA_SLEEP) { mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x08); mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x0f); mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x00); } else { return -EINVAL; } mrf24j40_resetrfsm(dev); return OK; }