#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_SAME70_XPLAINED

config SAME70XPLAINED_CLICKSHIELD
	bool "Mikroe Click Shield"
	default n
	---help---
		In the mrf24j40-starhub configuration, a click shield from
		MikroElectronika was used along with a Click "Bee" module.  The
		click shield supports two click shields.

config SAME70XPLAINED_MB1_SPI
	bool
	default n

config SAME70XPLAINED_MB2_SPI
	bool
	default n

choice
	prompt "mikroBUS1 Click"
	depends on SAME70XPLAINED_CLICKSHIELD
	default SAME70XPLAINED_MB1_NONE

config SAME70XPLAINED_MB1_NONE
	bool "None"

config SAME70XPLAINED_MB1_BEE
	bool "MRF24J40 Bee in mikroBUS1"
	depends on IEEE802154_MRF24J40
	select SAME70XPLAINED_MB1_SPI

config SAME70XPLAINED_MB1_XBEE
	bool "XBee in mikroBUS1"
	depends on IEEE802154_XBEE
	select SAME70XPLAINED_MB1_SPI

endchoice # mikroBUS1 Click

choice
	prompt "mikroBUS2 Click"
	depends on SAME70XPLAINED_CLICKSHIELD
	default SAME70XPLAINED_MB2_NONE

config SAME70XPLAINED_MB2_NONE
	bool "None"

config SAME70XPLAINED_MB2_BEE
	bool "MRF24J40 Bee in mikroBUS2"
	depends on IEEE802154_MRF24J40
	select SAME70XPLAINED_MB2_SPI

config SAME70XPLAINED_MB2_XBEE
	bool "XBee in mikroBUS2"
	depends on IEEE802154_XBEE
	select SAME70XPLAINED_MB2_SPI

endchoice # mikroBUS2 Click

config SAME70XPLAINED_HSMCI0_AUTOMOUNT
	bool "HSMCI0 automounter"
	default n
	depends on FS_AUTOMOUNTER && SAMV7_HSMCI0

if SAME70XPLAINED_HSMCI0_AUTOMOUNT

config SAME70XPLAINED_HSMCI0_AUTOMOUNT_FSTYPE
	string "HSMCI0 file system type"
	default "vfat"

config SAME70XPLAINED_HSMCI0_AUTOMOUNT_BLKDEV
	string "HSMCI0 block device"
	default "/dev/mmcsd0"

config SAME70XPLAINED_HSMCI0_AUTOMOUNT_MOUNTPOINT
	string "HSMCI0 mount point"
	default "/mnt/sdcard0"

config SAME70XPLAINED_HSMCI0_AUTOMOUNT_DDELAY
	int "HSMCI0 debounce delay (milliseconds)"
	default 1000

config SAME70XPLAINED_HSMCI0_AUTOMOUNT_UDELAY
	int "HSMCI0 unmount retry delay (milliseconds)"
	default 2000

endif # SAME70XPLAINED_HSMCI0_AUTOMOUNT

config SAME70XPLAINED_PROGMEM_OTA_PARTITION
	bool
	default n
	select MTD
	select MTD_BYTE_WRITE
	select MTD_PARTITION
	select MTD_PROGMEM
	select MTD_PROGMEM_ERASESTATE

menuconfig SAME70XPLAINED_APP_FORMAT_MCUBOOT
	bool "MCUboot-bootable format"
	default n
	select SAME70XPLAINED_PROGMEM_OTA_PARTITION
	---help---
		The MCUboot support of loading the firmware images.

if SAME70XPLAINED_APP_FORMAT_MCUBOOT

config SAME70XPLAINED_MCUBOOT_BOOTLOADER
	bool "MCUboot bootloader application"
	default n
	---help---
		This switch between linker scripts to allow an application be
		built to another entry point address.

comment "MCUboot Application Image OTA Update support"

config SAME70XPLAINED_OTA_PRIMARY_SLOT_OFFSET
	hex "MCUboot application image primary slot offset"
	default "0x20000"

config SAME70XPLAINED_OTA_PRIMARY_SLOT_DEVPATH
	string "Application image primary slot device path"
	default "/dev/ota0"

config SAME70XPLAINED_OTA_SECONDARY_SLOT_OFFSET
	hex "MCUboot application image secondary slot offset"
	default "0x100000"

config SAME70XPLAINED_OTA_SECONDARY_SLOT_DEVPATH
	string "Application image secondary slot device path"
	default "/dev/ota1"

config SAME70XPLAINED_OTA_SLOT_SIZE
	hex "MCUboot application image slot size (in bytes)"
	default "0xe0000"

config SAME70XPLAINED_OTA_SCRATCH_OFFSET
	hex "MCUboot scratch partition offset"
	default "0x1e0000"

config SAME70XPLAINED_OTA_SCRATCH_DEVPATH
	string "Scratch partition device path"
	default "/dev/otascratch"

config SAME70XPLAINED_OTA_SCRATCH_SIZE
	hex "MCUboot scratch partition size (in bytes)"
	default "0x20000"

endif # SAME70XPLAINED_APP_FORMAT_MCUBOOT

endif # ARCH_BOARD_SAME70_XPLAINED