/**************************************************************************** * net/recvfrom.c * * Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET #include #include #include #include #include #include #include #include #include #include "net_internal.h" #include "uip/uip_internal.h" /**************************************************************************** * Definitions ****************************************************************************/ #define TCP_TIMEO 10 /* Deciseconds after data received before recv() returns */ #define UDPBUF ((struct uip_udpip_hdr *)&dev->d_buf[UIP_LLH_LEN]) #define TCPBUF ((struct uip_tcpip_hdr *)&dev->d_buf[UIP_LLH_LEN]) /**************************************************************************** * Private Types ****************************************************************************/ #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) struct recvfrom_s { FAR struct socket *rf_sock; /* The parent socket structure */ #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) uint32_t rf_starttime; /* rcv start time for determining timeout */ #endif FAR struct uip_callback_s *rf_cb; /* Reference to callback instance */ sem_t rf_sem; /* Semaphore signals recv completion */ size_t rf_buflen; /* Length of receive buffer */ char *rf_buffer; /* Pointer to receive buffer */ #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 *rf_from; /* Address of sender */ #else FAR struct sockaddr_in *rf_from; /* Address of sender */ #endif size_t rf_recvlen; /* The received length */ int rf_result; /* OK:success, failure:negated errno */ }; #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Function: recvfrom_newdata * * Description: * Copy the read data from the packet * * Parameters: * dev The sructure of the network driver that caused the interrupt * pstate recvfrom state structure * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) static void recvfrom_newdata(struct uip_driver_s *dev, struct recvfrom_s *pstate) { size_t recvlen; /* Get the length of the data to return */ if (dev->d_len > pstate->rf_buflen) { recvlen = pstate->rf_buflen; } else { recvlen = dev->d_len; } /* Copy the new appdata into the user buffer */ memcpy(pstate->rf_buffer, dev->d_appdata, recvlen); nllvdbg("Received %d bytes (of %d)\n", (int)recvlen, (int)dev->d_len); /* Update the accumulated size of the data read */ pstate->rf_recvlen += recvlen; pstate->rf_buffer += recvlen; pstate->rf_buflen -= recvlen; /* Indicate no data in the buffer */ dev->d_len = 0; } #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Function: recvfrom_readahead * * Description: * Copy the read data from the packet * * Parameters: * dev The sructure of the network driver that caused the interrupt * pstate recvfrom state structure * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #if defined(CONFIG_NET_TCP) && CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 static inline void recvfrom_readahead(struct recvfrom_s *pstate) { struct uip_conn *conn = (struct uip_conn *)pstate->rf_sock->s_conn; struct uip_readahead_s *readahead; size_t recvlen; /* Check there is any TCP data already buffered in a read-ahead * buffer. */ do { /* Get the read-ahead buffer at the head of the list (if any) */ readahead = (struct uip_readahead_s *)sq_remfirst(&conn->readahead); if (readahead) { /* We have a new buffer... transfer that buffered data into * the user buffer. * * First, get the length of the data to transfer. */ if (readahead->rh_nbytes > pstate->rf_buflen) { recvlen = pstate->rf_buflen; } else { recvlen = readahead->rh_nbytes; } if (recvlen > 0) { /* Copy the read-ahead data into the user buffer */ memcpy(pstate->rf_buffer, readahead->rh_buffer, recvlen); nllvdbg("Received %d bytes (of %d)\n", recvlen, readahead->rh_nbytes); /* Update the accumulated size of the data read */ pstate->rf_recvlen += recvlen; pstate->rf_buffer += recvlen; pstate->rf_buflen -= recvlen; } /* If the read-ahead buffer is empty, then release it. If not, then * we will have to move the data down and return the buffer to the * front of the list. */ if (recvlen < readahead->rh_nbytes) { readahead->rh_nbytes -= recvlen; memcpy(readahead->rh_buffer, &readahead->rh_buffer[recvlen], readahead->rh_nbytes); sq_addfirst(&readahead->rh_node, &conn->readahead); } else { uip_tcpreadaheadrelease(readahead); } } } while (readahead && pstate->rf_buflen > 0); } #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Function: recvfrom_timeout * * Description: * Check for recvfrom timeout. * * Parameters: * pstate recvfrom state structure * * Returned Value: * TRUE:timeout FALSE:no timeout * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) static int recvfrom_timeout(struct recvfrom_s *pstate) { FAR struct socket *psock = 0; socktimeo_t timeo = 0; /* If this is a TCP socket that has already received some data, * than we will always use a short timeout. */ if (pstate->rf_recvlen > 0) { /* Use the short timeout */ timeo = TCP_TIMEO; } /* No.. check for a timeout configured via setsockopts(SO_RCVTIMEO). * If none... we well let the read hang forever. */ else { /* Get the socket reference from the private data */ psock = pstate->rf_sock; if (psock) { timeo = psock->s_rcvtimeo; } } /* Is there an effective timeout? */ if (timeo) { /* Yes.. Check if the timeout has elapsed */ return net_timeo(pstate->rf_starttime, timeo); } /* No timeout */ return FALSE; } #endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Function: recvfrom_tcpsender * * Description: * Getting the sender's address from the UDP packet * * Parameters: * dev - The device driver data structure * pstate - the recvfrom state structure * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #ifdef CONFIG_NET_TCP static inline void recvfrom_tcpsender(struct uip_driver_s *dev, struct recvfrom_s *pstate) { #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 *infrom = pstate->rf_from; #else FAR struct sockaddr_in *infrom = pstate->rf_from; #endif if (infrom) { infrom->sin_family = AF_INET; infrom->sin_port = TCPBUF->srcport; #ifdef CONFIG_NET_IPv6 uip_ipaddr_copy(infrom->sin_addr.s_addr, TCPBUF->srcipaddr); #else uip_ipaddr_copy(infrom->sin_addr.s_addr, uip_ip4addr_conv(TCPBUF->srcipaddr)); #endif } } #endif /**************************************************************************** * Function: recvfrom_tcpinterrupt * * Description: * This function is called from the interrupt level to perform the actual * TCP receive operation via by the uIP layer. * * Parameters: * dev The structure of the network driver that caused the interrupt * conn The connection structure associated with the socket * flags Set of events describing why the callback was invoked * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #ifdef CONFIG_NET_TCP static uint16_t recvfrom_tcpinterrupt(struct uip_driver_s *dev, void *conn, void *pvpriv, uint16_t flags) { struct recvfrom_s *pstate = (struct recvfrom_s *)pvpriv; nllvdbg("flags: %04x\n", flags); /* 'priv' might be null in some race conditions (?) */ if (pstate) { /* If new data is available, then complete the read action. */ if ((flags & UIP_NEWDATA) != 0) { /* Copy the data from the packet */ recvfrom_newdata(dev, pstate); /* Save the sender's address in the caller's 'from' location */ recvfrom_tcpsender(dev, pstate); /* Indicate that the data has been consumed and that an ACK * should be sent. */ flags = (flags & ~UIP_NEWDATA) | UIP_SNDACK; /* If the user buffer has been filled, then we are finished. */ if (pstate->rf_buflen == 0) { nllvdbg("TCP resume\n"); /* The TCP receive buffer is full. Return now, perhaps truncating * the received data (need to fix that). * * Don't allow any further TCP call backs. */ pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Wake up the waiting thread, returning the number of bytes * actually read. */ sem_post(&pstate->rf_sem); } /* Reset the timeout. We will want a short timeout to terminate * the TCP receive. */ #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) pstate->rf_starttime = clock_systimer(); #endif } /* Check for a loss of connection */ else if ((flags & (UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT)) != 0) { nllvdbg("error\n"); /* Stop further callbacks */ pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Report not connected */ pstate->rf_result = -ENOTCONN; /* Wake up the waiting thread */ sem_post(&pstate->rf_sem); } /* No data has been received -- this is some other event... probably a * poll -- check for a timeout. */ #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) else if (recvfrom_timeout(pstate)) { /* Yes.. the timeout has elapsed... do not allow any further * callbacks */ nllvdbg("TCP timeout\n"); pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Report an error only if no data has been received */ if (pstate->rf_recvlen == 0) { /* Report the timeout error */ pstate->rf_result = -EAGAIN; } /* Wake up the waiting thread, returning either the error -EAGAIN * that signals the timeout event or the data received up to * the point tht the timeout occured (no error). */ sem_post(&pstate->rf_sem); } #endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ } return flags; } #endif /* CONFIG_NET_TCP */ /**************************************************************************** * Function: recvfrom_udpsender * * Description: * Getting the sender's address from the UDP packet * * Parameters: * dev - The device driver data structure * pstate - the recvfrom state structure * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #ifdef CONFIG_NET_UDP static inline void recvfrom_udpsender(struct uip_driver_s *dev, struct recvfrom_s *pstate) { #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 *infrom = pstate->rf_from; #else FAR struct sockaddr_in *infrom = pstate->rf_from; #endif if (infrom) { infrom->sin_family = AF_INET; infrom->sin_port = UDPBUF->srcport; #ifdef CONFIG_NET_IPv6 uip_ipaddr_copy(infrom->sin_addr.s_addr, UDPBUF->srcipaddr); #else uip_ipaddr_copy(infrom->sin_addr.s_addr, uip_ip4addr_conv(UDPBUF->srcipaddr)); #endif } } #endif /**************************************************************************** * Function: recvfrom_udpinterrupt * * Description: * This function is called from the interrupt level to perform the actual * UDP receive operation via by the uIP layer. * * Parameters: * dev The sructure of the network driver that caused the interrupt * conn The connection structure associated with the socket * flags Set of events describing why the callback was invoked * * Returned Value: * None * * Assumptions: * Running at the interrupt level * ****************************************************************************/ #ifdef CONFIG_NET_UDP static uint16_t recvfrom_udpinterrupt(struct uip_driver_s *dev, void *pvconn, void *pvpriv, uint16_t flags) { struct recvfrom_s *pstate = (struct recvfrom_s *)pvpriv; nllvdbg("flags: %04x\n", flags); /* 'priv' might be null in some race conditions (?) */ if (pstate) { /* If new data is available, then complete the read action. */ if ((flags & UIP_NEWDATA) != 0) { /* Copy the data from the packet */ recvfrom_newdata(dev, pstate); /* We are finished. */ nllvdbg("UDP done\n"); /* Don't allow any further UDP call backs. */ pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Save the sender's address in the caller's 'from' location */ recvfrom_udpsender(dev, pstate); /* Indicate that the data has been consumed */ flags &= ~UIP_NEWDATA; /* Wake up the waiting thread, returning the number of bytes * actually read. */ sem_post(&pstate->rf_sem); } /* Check for a loss of connection */ else if ((flags & (UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT)) != 0) { nllvdbg("error\n"); /* Stop further callbacks */ pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Report not connected */ pstate->rf_result = -ENOTCONN; /* Wake up the waiting thread */ sem_post(&pstate->rf_sem); } /* No data has been received -- this is some other event... probably a * poll -- check for a timeout. */ #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) else if (recvfrom_timeout(pstate)) { /* Yes.. the timeout has elapsed... do not allow any further * callbacks */ nllvdbg("UDP timeout\n"); /* Stop further callbacks */ pstate->rf_cb->flags = 0; pstate->rf_cb->priv = NULL; pstate->rf_cb->event = NULL; /* Report a timeout error */ pstate->rf_result = -EAGAIN; /* Wake up the waiting thread */ sem_post(&pstate->rf_sem); } #endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ } return flags; } #endif /* CONFIG_NET_UDP */ /**************************************************************************** * Function: recvfrom_init * * Description: * Initialize the state structure * * Parameters: * psock Pointer to the socket structure for the socket * buf Buffer to receive data * len Length of buffer * pstate A pointer to the state structure to be initialized * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) static void recvfrom_init(FAR struct socket *psock, FAR void *buf, size_t len, #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 *infrom, #else FAR struct sockaddr_in *infrom, #endif struct recvfrom_s *pstate) { /* Initialize the state structure. */ memset(pstate, 0, sizeof(struct recvfrom_s)); (void)sem_init(&pstate->rf_sem, 0, 0); /* Doesn't really fail */ pstate->rf_buflen = len; pstate->rf_buffer = buf; pstate->rf_from = infrom; /* Set up the start time for the timeout */ pstate->rf_sock = psock; #if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) pstate->rf_starttime = clock_systimer(); #endif } #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Function: recvfrom_result * * Description: * Evaluate the result of the recv operations * * Parameters: * result The result of the uip_lockedwait operation (may indicate EINTR) * pstate A pointer to the state structure to be initialized * * Returned Value: * The result of the recv operation with errno set appropriately * * Assumptions: * ****************************************************************************/ #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) static ssize_t recvfrom_result(int result, struct recvfrom_s *pstate) { int save_errno = errno; /* In case something we do changes it */ /* Release semaphore in the state structure */ sem_destroy(&pstate->rf_sem); /* Check for a error/timeout detected by the interrupt handler. Errors are * signaled by negative errno values for the rcv length */ if (pstate->rf_result < 0) { /* Return EGAIN on a timeout or ENOTCONN on loss of connection */ return pstate->rf_result; } /* If uip_lockedwait failed, then we were probably reawakened by a signal. In * this case, uip_lockedwait will have set errno appropriately. */ if (result < 0) { return -save_errno; } return pstate->rf_recvlen; } #endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ /**************************************************************************** * Function: udp_recvfrom * * Description: * Perform the recvfrom operation for a UDP SOCK_DGRAM * * Parameters: * psock Pointer to the socket structure for the SOCK_DRAM socket * buf Buffer to receive data * len Length of buffer * infrom INET ddress of source (may be NULL) * * Returned Value: * On success, returns the number of characters sent. On error, * -errno is returned (see recvfrom for list of errnos). * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_UDP #ifdef CONFIG_NET_IPv6 static ssize_t udp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, FAR struct sockaddr_in6 *infrom ) #else static ssize_t udp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, FAR struct sockaddr_in *infrom ) #endif { struct uip_udp_conn *conn = (struct uip_udp_conn *)psock->s_conn; struct recvfrom_s state; uip_lock_t save; int ret; /* Perform the UDP recvfrom() operation */ /* Initialize the state structure. This is done with interrupts * disabled because we don't want anything to happen until we * are ready. */ save = uip_lock(); recvfrom_init(psock, buf, len, infrom, &state); /* Setup the UDP remote connection */ ret = uip_udpconnect(conn, NULL); if (ret < 0) { uip_unlock(save); return ret; } /* Set up the callback in the connection */ state.rf_cb = uip_udpcallbackalloc(conn); if (state.rf_cb) { /* Set up the callback in the connection */ state.rf_cb->flags = UIP_NEWDATA|UIP_POLL|UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT; state.rf_cb->priv = (void*)&state; state.rf_cb->event = recvfrom_udpinterrupt; /* Enable the UDP socket */ uip_udpenable(conn); /* Wait for either the receive to complete or for an error/timeout to occur. * NOTES: (1) uip_lockedwait will also terminate if a signal is received, (2) * interrupts are disabled! They will be re-enabled while the task sleeps * and automatically re-enabled when the task restarts. */ ret = uip_lockedwait(&state. rf_sem); /* Make sure that no further interrupts are processed */ uip_udpdisable(conn); uip_udpcallbackfree(conn, state.rf_cb); uip_unlock(save); ret = recvfrom_result(ret, &state); } else { ret = -EBUSY; } return ret; } #endif /* CONFIG_NET_UDP */ /**************************************************************************** * Function: tcp_recvfrom * * Description: * Perform the recvfrom operation for a TCP/IP SOCK_STREAM * * Parameters: * psock Pointer to the socket structure for the SOCK_DRAM socket * buf Buffer to receive data * len Length of buffer * infrom INET ddress of source (may be NULL) * * Returned Value: * On success, returns the number of characters sent. On error, * -errno is returned (see recvfrom for list of errnos). * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_TCP #ifdef CONFIG_NET_IPv6 static ssize_t tcp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, FAR struct sockaddr_in6 *infrom ) #else static ssize_t tcp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, FAR struct sockaddr_in *infrom ) #endif { struct recvfrom_s state; uip_lock_t save; int ret = OK; /* Verify that the SOCK_STREAM has been connected */ if (!_SS_ISCONNECTED(psock->s_flags)) { /* The SOCK_STREAM must be connected in order to receive */ return -ENOTCONN; } /* Initialize the state structure. This is done with interrupts * disabled because we don't want anything to happen until we * are ready. */ save = uip_lock(); recvfrom_init(psock, buf, len, infrom, &state); #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 /* Handle any any TCP data already buffered in a read-ahead buffer. */ recvfrom_readahead(&state); /* In general, this uIP-based implementation will not support non-blocking * socket operations... except in a few cases: Here for TCP receive with read-ahead * enabled. If this socket is configured as non-blocking then return EAGAIN * if no data was obtained from the read-ahead buffers. */ if (_SS_ISNONBLOCK(psock->s_flags)) { /* Return OK if something was received; EGAIN if not */ if (state.rf_recvlen <= 0) { /* Nothing was received */ ret = -EAGAIN; } else { /* The return value is the number of bytes read from the read-ahead buffer */ ret = state.rf_recvlen; } } /* It is okay to block if we need to. If there is space to receive anything * more, then we will wait to receive the data. */ else if (state.rf_buflen > 0) #endif { struct uip_conn *conn = (struct uip_conn *)psock->s_conn; /* Set up the callback in the connection */ state.rf_cb = uip_tcpcallbackalloc(conn); if (state.rf_cb) { state.rf_cb->flags = UIP_NEWDATA|UIP_POLL|UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT; state.rf_cb->priv = (void*)&state; state.rf_cb->event = recvfrom_tcpinterrupt; /* Wait for either the receive to complete or for an error/timeout to occur. * NOTES: (1) uip_lockedwait will also terminate if a signal is received, (2) * interrupts may be disabled! They will be re-enabled while the task sleeps * and automatically re-enabled when the task restarts. */ ret = uip_lockedwait(&state.rf_sem); /* Make sure that no further interrupts are processed */ uip_tcpcallbackfree(conn, state.rf_cb); ret = recvfrom_result(ret, &state); } else { ret = -EBUSY; } } uip_unlock(save); return ret; } #endif /* CONFIG_NET_TCP */ /**************************************************************************** * Global Functions ****************************************************************************/ /**************************************************************************** * Function: recvfrom * * Description: * recvfrom() receives messages from a socket, and may be used to receive * data on a socket whether or not it is connection-oriented. * * If from is not NULL, and the underlying protocol provides the source * address, this source address is filled in. The argument fromlen * initialized to the size of the buffer associated with from, and modified * on return to indicate the actual size of the address stored there. * * Parameters: * sockfd Socket descriptor of socket * buf Buffer to receive data * len Length of buffer * flags Receive flags * from Address of source (may be NULL) * fromlen The length of the address structure * * Returned Value: * On success, returns the number of characters sent. On error, * -1 is returned, and errno is set appropriately: * * EAGAIN * The socket is marked non-blocking and the receive operation would block, * or a receive timeout had been set and the timeout expired before data * was received. * EBADF * The argument sockfd is an invalid descriptor. * ECONNREFUSED * A remote host refused to allow the network connection (typically because * it is not running the requested service). * EFAULT * The receive buffer pointer(s) point outside the process's address space. * EINTR * The receive was interrupted by delivery of a signal before any data were * available. * EINVAL * Invalid argument passed. * ENOMEM * Could not allocate memory. * ENOTCONN * The socket is associated with a connection-oriented protocol and has * not been connected. * ENOTSOCK * The argument sockfd does not refer to a socket. * * Assumptions: * ****************************************************************************/ ssize_t recvfrom(int sockfd, FAR void *buf, size_t len, int flags, FAR struct sockaddr *from, FAR socklen_t *fromlen) { FAR struct socket *psock; #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 *infrom = (struct sockaddr_in6 *)from; #else FAR struct sockaddr_in *infrom = (struct sockaddr_in *)from; #endif #endif ssize_t ret; int err; /* Verify that non-NULL pointers were passed */ #ifdef CONFIG_DEBUG if (!buf) { err = EINVAL; goto errout; } #endif /* Get the underlying socket structure */ /* Verify that the sockfd corresponds to valid, allocated socket */ psock = sockfd_socket(sockfd); if (!psock || psock->s_crefs <= 0) { err = EBADF; goto errout; } /* If a 'from' address has been provided, verify that it is large * enough to hold this address family. */ if (from) { #ifdef CONFIG_NET_IPv6 if (*fromlen < sizeof(struct sockaddr_in6)) #else if (*fromlen < sizeof(struct sockaddr_in)) #endif { err = EINVAL; goto errout; } } /* Set the socket state to receiving */ psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_RECV); /* Perform the TCP/IP or UDP recv() operation */ #if defined(CONFIG_NET_UDP) && defined(CONFIG_NET_TCP) if (psock->s_type == SOCK_STREAM) { ret = tcp_recvfrom(psock, buf, len, infrom); } else { ret = udp_recvfrom(psock, buf, len, infrom); } #elif defined(CONFIG_NET_TCP) ret = tcp_recvfrom(psock, buf, len, infrom); #elif defined(CONFIG_NET_UDP) ret = udp_recvfrom(psock, buf, len, infrom); #else ret = -ENOSYS; #endif /* Set the socket state to idle */ psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_IDLE); /* Handle returned errors */ if (ret < 0) { err = -ret; goto errout; } /* Success return */ return ret; errout: errno = err; return ERROR; } #endif /* CONFIG_NET */