/**************************************************************************** * drivers/net/vnet.c * * Copyright (C) 2011 Yu Qiang. All rights reserved. * Author: Yu Qiang * * This file is a part of NuttX: * * Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #if defined(CONFIG_NET) && defined(CONFIG_NET_VNET) #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_NET_PKT # include #endif #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* CONFIG_VNET_NINTERFACES determines the number of physical interfaces * that will be supported. */ #ifndef CONFIG_VNET_NINTERFACES # define CONFIG_VNET_NINTERFACES 1 #endif /* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */ #define VNET_WDDELAY (1*CLK_TCK) /* TX timeout = 1 minute */ #define VNET_TXTIMEOUT (60*CLK_TCK) /* This is a helper pointer for accessing the contents of the Ethernet header */ #define BUF ((struct eth_hdr_s *)vnet->sk_dev.d_buf) /**************************************************************************** * Private Types ****************************************************************************/ /* The vnet_driver_s encapsulates all state information for a single hardware * interface */ struct vnet_driver_s { bool sk_bifup; /* true:ifup false:ifdown */ WDOG_ID sk_txpoll; /* TX poll timer */ struct rgmp_vnet *vnet; /* This holds the information visible to the NuttX */ struct net_driver_s sk_dev; /* Interface understood by the network */ }; /**************************************************************************** * Private Data ****************************************************************************/ static struct vnet_driver_s g_vnet[CONFIG_VNET_NINTERFACES]; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Common TX logic */ static int vnet_transmit(FAR struct vnet_driver_s *vnet); static int vnet_txpoll(struct net_driver_s *dev); /* Interrupt handling */ static void vnet_txdone(FAR struct vnet_driver_s *vnet); /* Watchdog timer expirations */ static void vnet_polltimer(int argc, uint32_t arg, ...); static void vnet_txtimeout(int argc, uint32_t arg, ...); /* NuttX callback functions */ static int vnet_ifup(struct net_driver_s *dev); static int vnet_ifdown(struct net_driver_s *dev); static int vnet_txavail(struct net_driver_s *dev); #ifdef CONFIG_NET_IGMP static int vnet_addmac(struct net_driver_s *dev, FAR const uint8_t *mac); static int vnet_rmmac(struct net_driver_s *dev, FAR const uint8_t *mac); #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Function: vnet_transmit * * Description: * Start hardware transmission. Called either from the txdone interrupt * handling or from watchdog based polling. * * Parameters: * vnet - Reference to the driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ static int vnet_transmit(FAR struct vnet_driver_s *vnet) { int errcode; /* Verify that the hardware is ready to send another packet. If we get * here, then we are committed to sending a packet; Higher level logic * must have assured that there is not transmission in progress. */ /* Send the packet: address=vnet->sk_dev.d_buf, length=vnet->sk_dev.d_len */ errcode = vnet_xmit(vnet->vnet, (char *)vnet->sk_dev.d_buf, vnet->sk_dev.d_len); if (errcode) { /* When vnet_xmit fail, it means TX buffer is full. Watchdog * is of no use here because no TX done INT will happen. So * we reset the TX buffer directly. */ #ifdef CONFIG_DEBUG_FEATURES cprintf("VNET: TX buffer is full\n"); #endif return ERROR; } else { /* This step may be unnecessary here */ vnet_txdone(vnet); } return OK; } /**************************************************************************** * Function: vnet_txpoll * * Description: * The transmitter is available, check if the network has any outgoing * packets ready to send. This is a callback from devif_poll(). * devif_poll() may be called: * * 1. When the preceding TX packet send is complete, * 2. When the preceding TX packet send timesout and the interface is reset * 3. During normal TX polling * * Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ static int vnet_txpoll(struct net_driver_s *dev) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; /* If the polling resulted in data that should be sent out on the network, * the field d_len is set to a value > 0. */ if (vnet->sk_dev.d_len > 0) { /* Look up the destination MAC address and add it to the Ethernet * header. */ #ifdef CONFIG_NET_IPv4 #ifdef CONFIG_NET_IPv6 if (IFF_IS_IPv4(vnet->sk_dev.d_flags)) #endif { arp_out(&vnet->sk_dev); } #endif /* CONFIG_NET_IPv4 */ #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_IPv4 else #endif { neighbor_out(&vnet->sk_dev); } #endif /* CONFIG_NET_IPv6 */ /* Send the packet */ vnet_transmit(vnet); /* Check if there is room in the device to hold another packet. If not, * return a non-zero value to terminate the poll. */ if (vnet_is_txbuff_full(vnet->vnet)) { return 1; } } /* If zero is returned, the polling will continue until all connections have * been examined. */ return 0; } /**************************************************************************** * Function: rtos_vnet_recv * * Description: * An interrupt was received indicating the availability of a new RX packet * * Parameters: * vnet - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by interrupt handling logic. * ****************************************************************************/ void rtos_vnet_recv(struct rgmp_vnet *rgmp_vnet, char *data, int len) { struct vnet_driver_s *vnet = rgmp_vnet->priv; do { /* Check if the packet is a valid size for the network buffer * configuration. */ if (len > CONFIG_NET_ETH_MTU || len < 14) { #ifdef CONFIG_DEBUG_FEATURES cprintf("VNET: receive invalid packet of size %d\n", len); #endif return; } /* Copy the data data from the hardware to vnet->sk_dev.d_buf. Set * amount of data in vnet->sk_dev.d_len */ memcpy(vnet->sk_dev.d_buf, data, len); vnet->sk_dev.d_len = len; #ifdef CONFIG_NET_PKT /* When packet sockets are enabled, feed the frame into the packet tap */ pkt_input(&vnet->sk_dev); #endif /* We only accept IP packets of the configured type and ARP packets */ #ifdef CONFIG_NET_IPv4 if (BUF->type == HTONS(ETHTYPE_IP)) { ninfo("IPv4 frame\n"); /* Handle ARP on input then give the IPv4 packet to the network * layer */ arp_ipin(&vnet->sk_dev); ipv4_input(&vnet->sk_dev); /* If the above function invocation resulted in data that should be * sent out on the network, the field d_len will set to a value > 0. */ if (vnet->sk_dev.d_len > 0) { /* Update the Ethernet header with the correct MAC address */ #ifdef CONFIG_NET_IPv6 if (IFF_IS_IPv4(vnet->sk_dev.d_flags)) #endif { arp_out(&vnet->sk_dev); } #ifdef CONFIG_NET_IPv6 else { neighbor_out(&vnet->sk_dev); } #endif /* And send the packet */ vnet_transmit(vnet); } } else #endif #ifdef CONFIG_NET_IPv6 if (BUF->type == HTONS(ETHTYPE_IP6)) { ninfo("Iv6 frame\n"); /* Give the IPv6 packet to the network layer */ ipv6_input(&vnet->sk_dev); /* If the above function invocation resulted in data that should be * sent out on the network, the field d_len will set to a value > 0. */ if (vnet->sk_dev.d_len > 0) { /* Update the Ethernet header with the correct MAC address */ #ifdef CONFIG_NET_IPv4 if (IFF_IS_IPv4(vnet->sk_dev.d_flags)) { arp_out(&vnet->sk_dev); } else #endif #ifdef CONFIG_NET_IPv6 { neighbor_out(&vnet->sk_dev); } #endif /* And send the packet */ vnet_transmit(vnet); } } else #endif #ifdef CONFIG_NET_ARP if (BUF->type == htons(ETHTYPE_ARP)) { arp_arpin(&vnet->sk_dev); /* If the above function invocation resulted in data that should * be sent out on the network, the field d_len will set to a * value > 0. */ if (vnet->sk_dev.d_len > 0) { vnet_transmit(vnet); } } #endif } while (0); /* While there are more packets to be processed */ } /**************************************************************************** * Function: vnet_txdone * * Description: * An interrupt was received indicating that the last TX packet(s) is done * * Parameters: * vnet - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by the watchdog logic. * ****************************************************************************/ static void vnet_txdone(FAR struct vnet_driver_s *vnet) { /* Poll the network for new XMIT data */ (void)devif_poll(&vnet->sk_dev, vnet_txpoll); } /**************************************************************************** * Function: vnet_txtimeout * * Description: * Our TX watchdog timed out. Called from the timer interrupt handler. * The last TX never completed. Reset the hardware and start again. * * Parameters: * argc - The number of available arguments * arg - The first argument * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by the watchdog logic. * ****************************************************************************/ static void vnet_txtimeout(int argc, uint32_t arg, ...) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)arg; /* Poll the network for new XMIT data */ (void)devif_poll(&vnet->sk_dev, vnet_txpoll); } /**************************************************************************** * Function: vnet_polltimer * * Description: * Periodic timer handler. Called from the timer interrupt handler. * * Parameters: * argc - The number of available arguments * arg - The first argument * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by the watchdog logic. * ****************************************************************************/ static void vnet_polltimer(int argc, uint32_t arg, ...) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)arg; /* Check if there is room in the send another TX packet. We cannot perform * the TX poll if he are unable to accept another packet for transmission. */ if (vnet_is_txbuff_full(vnet->vnet)) { #ifdef CONFIG_DEBUG_FEATURES cprintf("VNET: TX buffer is full\n"); #endif return; } /* If so, update TCP timing states and poll the network for new XMIT data. * Hmmm.. might be bug here. Does this mean if there is a transmit in * progress, we will missing TCP time state updates? */ (void)devif_timer(&vnet->sk_dev, vnet_txpoll); /* Setup the watchdog poll timer again */ (void)wd_start(vnet->sk_txpoll, VNET_WDDELAY, vnet_polltimer, 1, (wdparm_t)arg); } /**************************************************************************** * Function: vnet_ifup * * Description: * NuttX Callback: Bring up the Ethernet interface when an IP address is * provided * * Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int vnet_ifup(struct net_driver_s *dev) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; ninfo("Bringing up: %d.%d.%d.%d\n", dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff, (dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24); /* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */ /* Set and activate a timer process */ (void)wd_start(vnet->sk_txpoll, VNET_WDDELAY, vnet_polltimer, 1, (wdparm_t)vnet); vnet->sk_bifup = true; return OK; } /**************************************************************************** * Function: vnet_ifdown * * Description: * NuttX Callback: Stop the interface. * * Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int vnet_ifdown(struct net_driver_s *dev) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; irqstate_t flags; /* Disable the Ethernet interrupt */ flags = enter_critical_section(); /* Cancel the TX poll timer and TX timeout timers */ wd_cancel(vnet->sk_txpoll); /* Put the EMAC is its reset, non-operational state. This should be * a known configuration that will guarantee the vnet_ifup() always * successfully brings the interface back up. */ /* Mark the device "down" */ vnet->sk_bifup = false; leave_critical_section(flags); return OK; } /**************************************************************************** * Function: vnet_txavail * * Description: * Driver callback invoked when new TX data is available. This is a * stimulus perform an out-of-cycle poll and, thereby, reduce the TX * latency. * * Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * Called in normal user mode * ****************************************************************************/ static int vnet_txavail(struct net_driver_s *dev) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; irqstate_t flags; /* Disable interrupts because this function may be called from interrupt * level processing. */ flags = enter_critical_section(); /* Ignore the notification if the interface is not yet up */ if (vnet->sk_bifup) { /* Check if there is room in the hardware to hold another outgoing packet. */ if (vnet_is_txbuff_full(vnet->vnet)) { #ifdef CONFIG_DEBUG_FEATURES cprintf("VNET: TX buffer is full\n"); #endif goto out; } /* If so, then poll the network for new XMIT data */ (void)devif_poll(&vnet->sk_dev, vnet_txpoll); } out: leave_critical_section(flags); return OK; } /**************************************************************************** * Function: vnet_addmac * * Description: * NuttX Callback: Add the specified MAC address to the hardware multicast * address filtering * * Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be added * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_IGMP static int vnet_addmac(struct net_driver_s *dev, FAR const uint8_t *mac) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; /* Add the MAC address to the hardware multicast routing table */ return OK; } #endif /**************************************************************************** * Function: vnet_rmmac * * Description: * NuttX Callback: Remove the specified MAC address from the hardware multicast * address filtering * * Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be removed * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_IGMP static int vnet_rmmac(struct net_driver_s *dev, FAR const uint8_t *mac) { FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private; /* Add the MAC address to the hardware multicast routing table */ return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Function: vnet_initialize * * Description: * Initialize the Ethernet controller and driver * * Parameters: * intf - In the case where there are multiple EMACs, this value * identifies which EMAC is to be initialized. * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * ****************************************************************************/ int vnet_init(struct rgmp_vnet *vnet) { struct vnet_driver_s *priv; static int i = 0; if (i >= CONFIG_VNET_NINTERFACES) { return -1; } priv = &g_vnet[i++]; /* Initialize the driver structure */ memset(priv, 0, sizeof(struct vnet_driver_s)); priv->sk_dev.d_ifup = vnet_ifup; /* I/F down callback */ priv->sk_dev.d_ifdown = vnet_ifdown; /* I/F up (new IP address) callback */ priv->sk_dev.d_txavail = vnet_txavail; /* New TX data callback */ #ifdef CONFIG_NET_IGMP priv->sk_dev.d_addmac = vnet_addmac; /* Add multicast MAC address */ priv->sk_dev.d_rmmac = vnet_rmmac; /* Remove multicast MAC address */ #endif priv->sk_dev.d_private = (FAR void *)priv; /* Used to recover private state from dev */ /* Create a watchdog for timing polling for and timing of transmisstions */ priv->sk_txpoll = wd_create(); /* Create periodic poll timer */ priv->vnet = vnet; vnet->priv = priv; /* Register the device with the OS */ (void)netdev_register(&priv->sk_dev), NET_LL_ETHERNET; return 0; } #endif /* CONFIG_NET && CONFIG_NET_VNET */