/**************************************************************************** * net/mld/mld.h * Multicast Listener Discovery (MLD) Definitions * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* State transition diagram for a router in Querier state (RFC 2710): * ________________ * | | * | |timer expired * timer expired| |(notify routing -, * (notify routing -)| No Listeners |clear rxmt tmr) * ------->| Present |<--------- * | | | | * | | | | * | |________________| | --------------- * | | | | rexmt timer | * | report received| | | expired | * | (notify routing +,| | | (send m-a-s | * | start timer)| | | query, | * __________|______ | ________|_|______ st rxmt | * | |<------------ | | tmr) | * | | | |<------- * | | report received | | * | | (start timer, | | * | | clear rxmt tmr) | | * | Listeners |<-------------------| Checking | * | Present | done received | Listeners | * | | (start timer*, | | * | | start rxmt timer, | | * | | send m-a-s query) | | * --->| |------------------->| | * | |_________________| |_________________| * | report received | * | (start timer) | * ----------------- * * State transition diagram for a router in Non-Querier state is * similar, but non-Queriers do not send any messages and are only * driven by message reception. * * ________________ * | | * | | * timer expired| |timer expired * (notify routing -)| No Listeners |(notify routing -) * --------->| Present |<--------- * | | | | * | | | | * | | | | * | |________________| | * | | | * | |report received | * | |(notify routing +,| * | | start timer) | * ________|________ | ________|________ * | |<--------- | | * | | report received | | * | | (start timer) | | * | Listeners |<-------------------| Checking | * | Present | m-a-s query rec'd | Listeners | * | | (start timer*) | | * ---->| |------------------->| | * | |_________________| |_________________| * | report received | * | (start timer) | * ----------------- */ #ifndef __NET_MLD_MLD_H #define __NET_MLD_MLD_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "devif/devif.h" #include "socket/socket.h" #ifdef CONFIG_NET_MLD /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Global flags */ #define MLD_QUERIER (1 << 0) /* Querier */ #define MLD_V1COMPAT (1 << 1) /* MLDv1 compatibility mode */ #define MLD_GENPEND (1 << 2) /* General query pending */ #define SET_MLD_QUERIER(f) do { (f) |= MLD_QUERIER; } while (0) #define SET_MLD_V1COMPAT(f) do { (f) |= MLD_V1COMPAT; } while (0) #define SET_MLD_GENPEND(f) do { (f) |= MLD_GENPEND; } while (0) #define CLR_MLD_QUERIER(f) do { (f) &= ~MLD_QUERIER; } while (0) #define CLR_MLD_V1COMPAT(f) do { (f) &= ~MLD_V1COMPAT; } while (0) #define CLR_MLD_GENPEND(f) do { (f) &= ~MLD_GENPEND; } while (0) #define IS_MLD_QUERIER(f) (((f) & MLD_QUERIER) != 0) #define IS_MLD_V1COMPAT(f) (((f) & MLD_V1COMPAT) != 0) #define IS_MLD_GENPEND(f) (((f) & MLD_GENPEND) != 0) /* Group flags */ #define MLD_STARTUP (1 << 1) /* Startup unsolicited Reports */ #define MLD_LASTREPORT (1 << 3) /* We were the last to report */ #define MLD_SCHEDMSG (1 << 4) /* Outgoing message scheduled */ #define MLD_WAITMSG (1 << 5) /* Block until message sent */ #define MLD_RPTPEND (1 << 6) /* Report pending */ #define SET_MLD_STARTUP(f) do { (f) |= MLD_STARTUP; } while (0) #define SET_MLD_LASTREPORT(f) do { (f) |= MLD_LASTREPORT; } while (0) #define SET_MLD_SCHEDMSG(f) do { (f) |= MLD_SCHEDMSG; } while (0) #define SET_MLD_WAITMSG(f) do { (f) |= MLD_WAITMSG; } while (0) #define SET_MLD_RPTPEND(f) do { (f) |= MLD_RPTPEND; } while (0) #define CLR_MLD_STARTUP(f) do { (f) &= ~MLD_STARTUP; } while (0) #define CLR_MLD_LASTREPORT(f) do { (f) &= ~MLD_LASTREPORT; } while (0) #define CLR_MLD_SCHEDMSG(f) do { (f) &= ~MLD_SCHEDMSG; } while (0) #define CLR_MLD_WAITMSG(f) do { (f) &= ~MLD_WAITMSG; } while (0) #define CLR_MLD_RPTPEND(f) do { (f) &= ~MLD_RPTPEND; } while (0) #define IS_MLD_STARTUP(f) (((f) & MLD_STARTUP) != 0) #define IS_MLD_LASTREPORT(f) (((f) & MLD_LASTREPORT) != 0) #define IS_MLD_SCHEDMSG(f) (((f) & MLD_SCHEDMSG) != 0) #define IS_MLD_WAITMSG(f) (((f) & MLD_WAITMSG) != 0) #define IS_MLD_RPTPEND(f) (((f) & MLD_RPTPEND) != 0) /* Debug ********************************************************************/ #ifdef CONFIG_NET_MLD_DEBUG # define mlderr _err # define mldwarn _warn # define mldinfo _info #else # define mlderr nerr # define mldwarn nwarn # define mldinfo ninfo #endif /**************************************************************************** * Public Type Definitions ****************************************************************************/ /* These are the types of messages that may be sent in response to a device * poll. */ enum mld_msgtype_e { MLD_SEND_NONE = 0, /* Nothing to send */ MLD_SEND_GENQUERY, /* Send General Query */ MLD_SEND_MASQUERY, /* Send General Query */ MLD_SEND_V1REPORT, /* Send MLDv1 Report message */ MLD_SEND_V2REPORT, /* Send MLDv2 Report message */ MLD_SEND_DONE /* Send Done message */ }; /* This structure represents one group member. There is a list of groups * for each device interface structure. */ struct mld_group_s { struct mld_group_s *next; /* Implements a singly-linked list */ net_ipv6addr_t grpaddr; /* Group IPv6 address */ struct work_s work; /* For deferred timeout operations */ struct wdog_s polldog; /* Timer used for periodic or delayed events */ sem_t sem; /* Used to wait for message transmission */ #ifdef CONFIG_NET_MLD_ROUTER uint16_t members; /* Number of members currently reporting (excludes us) */ uint16_t lstmbrs; /* Number of members reporting (last query) */ #endif uint8_t ifindex; /* Interface index */ uint8_t flags; /* See MLD_ flags definitions */ uint8_t msgtype; /* Pending message type to send (if non-zero) */ uint8_t count; /* Reports remaining in repetition count */ uint8_t njoins; /* Number of joins from this host */ }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus # define EXTERN extern "C" extern "C" { #else # define EXTERN extern #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ struct ipv6_mreq; /* Forward reference */ struct net_driver_s; /* Forward reference */ struct mld_mcast_listen_query_s; /* Forward reference */ struct mld_mcast_listen_report_v1_s; /* Forward reference */ struct mld_mcast_listen_report_v2_s; /* Forward reference */ struct mld_mcast_listen_done_s; /* Forward reference */ /**************************************************************************** * Name: mld_devinit * * Description: * Called when a new network device is registered to configure that device * for MLD support. * ****************************************************************************/ void mld_devinit(FAR struct net_driver_s *dev); /**************************************************************************** * Name: mld_query * * Description: * Called from icmpv6_input() when a Multicast Listener Query is received. * ****************************************************************************/ int mld_query(FAR struct net_driver_s *dev, FAR const struct mld_mcast_listen_query_s *query); /**************************************************************************** * Name: mld_report_v1 * * Description: * Called from icmpv6_input() when a MLDv1 Multicast Listener Report is * received. * ****************************************************************************/ int mld_report_v1(FAR struct net_driver_s *dev, FAR const struct mld_mcast_listen_report_v1_s *report); /**************************************************************************** * Name: mld_report_v2 * * Description: * Called from icmpv6_input() when a Version 2 Multicast Listener Report is * received. * ****************************************************************************/ int mld_report_v2(FAR struct net_driver_s *dev, FAR const struct mld_mcast_listen_report_v2_s *report); /**************************************************************************** * Name: mld_done * * Description: * Called from icmpv6_input() when a Multicast Listener Done is received. * ****************************************************************************/ int mld_done(FAR struct net_driver_s *dev, FAR const struct mld_mcast_listen_done_s *done); /**************************************************************************** * Name: mld_grpalloc * * Description: * Allocate a new group from heap memory. * ****************************************************************************/ FAR struct mld_group_s *mld_grpalloc(FAR struct net_driver_s *dev, FAR const net_ipv6addr_t addr); /**************************************************************************** * Name: mld_grpfind * * Description: * Find an existing group. * ****************************************************************************/ FAR struct mld_group_s *mld_grpfind(FAR struct net_driver_s *dev, FAR const net_ipv6addr_t addr); /**************************************************************************** * Name: mld_grpallocfind * * Description: * Find an existing group. If not found, create a new group for the * address. * ****************************************************************************/ FAR struct mld_group_s *mld_grpallocfind(FAR struct net_driver_s *dev, FAR const net_ipv6addr_t addr); /**************************************************************************** * Name: mld_grpfree * * Description: * Release a previously allocated group. * ****************************************************************************/ void mld_grpfree(FAR struct net_driver_s *dev, FAR struct mld_group_s *group); /**************************************************************************** * Name: mld_new_pollcycle * * Description: * Update accumulated membership at the beginning of each new poll cycle * ****************************************************************************/ #ifdef CONFIG_NET_MLD_ROUTER void mld_new_pollcycle(FAR struct net_driver_s *dev); #endif /**************************************************************************** * Name: mld_schedmsg * * Description: * Schedule a message to be send at the next driver polling interval. * ****************************************************************************/ int mld_schedmsg(FAR struct mld_group_s *group, uint8_t msgtype); /**************************************************************************** * Name: mld_waitmsg * * Description: * Schedule a message to be send at the next driver polling interval and * block, waiting for the message to be sent. * ****************************************************************************/ int mld_waitmsg(FAR struct mld_group_s *group, uint8_t msgtype); /**************************************************************************** * Name: mld_poll * * Description: * Poll the groups associated with the device to see if any MLD messages * are pending transfer. * * Returned Value: * Returns a non-zero value if a IGP message is sent. * ****************************************************************************/ void mld_poll(FAR struct net_driver_s *dev); /**************************************************************************** * Name: mld_send * * Description: * Sends an MLD IP packet on a network interface. This function constructs * the IP header and calculates the IP header checksum. * * Input Parameters: * dev - The device driver structure to use in the send operation. * group - Describes the multicast group member and identifies the * message to be sent. * msgtype - The type of the message to be sent (see enum mld_msgtype_e) * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ void mld_send(FAR struct net_driver_s *dev, FAR struct mld_group_s *group, uint8_t msgtype); /**************************************************************************** * Name: mld_report_msgtype * * Description: * Determine which type of Report to send, MLDv1 or MLDv2, depending on * current state of compatibility mode flag. * ****************************************************************************/ uint8_t mld_report_msgtype(FAR struct net_driver_s *dev); /**************************************************************************** * Name: mld_joingroup * * Description: * Add the specified group address to the group. This function * implements the logic for the IPV6_JOIN_GROUP socket option. * * The IPV6_JOIN_GROUP socket option is used to join a multicast group. * This is accomplished by using the setsockopt() API and specifying the * address of the ipv6_mreq structure containing the IPv6 multicast address * and the local IPv6 multicast interface index. The stack chooses a * default multicast interface if an interface index of 0 is passed. The * values specified in the IPV6_MREQ structure used by IPV6_JOIN_GROUP * and IPV6_LEAVE_GROUP must be symmetrical. The format of the ipv6_mreq * structure can be found in include/netinet/in.h * ****************************************************************************/ int mld_joingroup(FAR const struct ipv6_mreq *mrec); /**************************************************************************** * Name: mld_leavegroup * * Description: * Remove the specified group address to the group. This function * implements the logic for the IPV6_LEAVE_GROUP socket option. * * The IPV6_JOIN_GROUP socket option is used to join a multicast group. * This is accomplished by using the setsockopt() API and specifying the * address of the ipv6_mreq structure containing the IPv6 multicast address * and the local IPv6 multicast interface index. The stack chooses a * default multicast interface if an interface index of 0 is passed. The * values specified in the IPV6_MREQ structure used by IPV6_JOIN_GROUP * and IPV6_LEAVE_GROUP must be symmetrical. The format of the ipv6_mreq * structure can be found in include/netinet/in.h * ****************************************************************************/ int mld_leavegroup(FAR const struct ipv6_mreq *mrec); /**************************************************************************** * Name: mld_start_gentimer * * Description: * Start/Re-start the general query timer. * ****************************************************************************/ void mld_start_gentimer(FAR struct net_driver_s *dev, clock_t ticks); /**************************************************************************** * Name: mld_start_v1timer * * Description: * Start the MLDv1 compatibility timer. * ****************************************************************************/ void mld_start_v1timer(FAR struct net_driver_s *dev, clock_t ticks); /**************************************************************************** * Name: mld_start_polltimer * * Description: * Start the MLD poll timer. * ****************************************************************************/ void mld_start_polltimer(FAR struct mld_group_s *group, clock_t ticks); /**************************************************************************** * Name: mld_addmcastmac * * Description: * Add an MLD MAC address to the device's MAC filter table. * ****************************************************************************/ void mld_addmcastmac(FAR struct net_driver_s *dev, FAR const net_ipv6addr_t ipaddr); /**************************************************************************** * Name: mld_removemcastmac * * Description: * Remove an MLD MAC address from the device's MAC filter table. * ****************************************************************************/ void mld_removemcastmac(FAR struct net_driver_s *dev, FAR const net_ipv6addr_t ipaddr); #undef EXTERN #ifdef __cplusplus } #endif #endif /* CONFIG_NET_MLD */ #endif /* __NET_MLD_MLD_H */