/**************************************************************************** * drivers/analog/ads1242.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_SPI) && defined(CONFIG_ADC_ADS1242) /**************************************************************************** * Private Types ****************************************************************************/ struct ads1242_dev_s { FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */ uint32_t osc_period_us; /* Period of the oscillator attached to the ADS1242 in us */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* SPI Helpers */ static void ads1242_lock(FAR struct spi_dev_s *spi); static void ads1242_unlock(FAR struct spi_dev_s *spi); static void ads1242_reset(FAR struct ads1242_dev_s *dev); static void ads1242_perform_selfgain_calibration( FAR struct ads1242_dev_s *dev); static void ads1242_perform_selfoffset_calibration( FAR struct ads1242_dev_s *dev); static void ads1242_perform_systemoffset_calibration( FAR struct ads1242_dev_s *dev); static void ads1242_read_conversion_result(FAR struct ads1242_dev_s *dev, FAR uint32_t *conversion_result); static void ads1242_write_reg(FAR struct ads1242_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_value); static void ads1242_read_reg(FAR struct ads1242_dev_s *dev, uint8_t const reg_addr, FAR uint8_t *reg_value); static void ads1242_set_gain(FAR struct ads1242_dev_s *dev, ADS1242_GAIN_SELECTION const gain_selection); static void ads1242_set_positive_input(FAR struct ads1242_dev_s *dev, ADS1242_POSITIVE_INPUT_SELECTION const pos_in_sel); static void ads1242_set_negative_input(FAR struct ads1242_dev_s *dev, ADS1242_NEGATIVE_INPUT_SELECTION const neg_in_sel); static bool ads1242_is_data_ready(FAR struct ads1242_dev_s *dev); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) static void ads1242_print_regs(FAR struct ads1242_dev_s *dev, char const *msg); #endif /* CONFIG_DEBUG_FEATURES && CONFIG_DEBUG_INFO */ /* Character driver methods */ static int ads1242_open(FAR struct file *filep); static int ads1242_close(FAR struct file *filep); static ssize_t ads1242_read(FAR struct file *, FAR char *, size_t); static ssize_t ads1242_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int ads1242_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_ads1242_fops = { ads1242_open, /* open */ ads1242_close, /* close */ ads1242_read, /* read */ ads1242_write, /* write */ NULL, /* seek */ ads1242_ioctl, /* ioctl */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: ads1242_lock * * Description: * Lock and configure the SPI bus. * ****************************************************************************/ static void ads1242_lock(FAR struct spi_dev_s *spi) { SPI_LOCK(spi, true); SPI_SETMODE(spi, ADS1242_SPI_MODE); SPI_SETBITS(spi, 8); SPI_HWFEATURES(spi, 0); SPI_SETFREQUENCY(spi, ADS1242_SPI_FREQUENCY); } /**************************************************************************** * Name: ads1242_unlock * * Description: * Unlock the SPI bus. * ****************************************************************************/ static void ads1242_unlock(FAR struct spi_dev_s *spi) { SPI_LOCK(spi, false); } /**************************************************************************** * Name: ads1242_reset ****************************************************************************/ static void ads1242_reset(FAR struct ads1242_dev_s *dev) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); /* Set nADC_SPI_CS to low which * selects the ADS1242 */ SPI_SEND(dev->spi, ADS1242_CMD_RESET); /* Issue reset command */ SPI_SELECT(dev->spi, 0, false); /* Set nADC_SPI_CS to high which * deselects the ADS1242 */ up_mdelay(100); /* Wait a little so the device has * time to perform a proper reset */ ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_perform_selfgain_calibration ****************************************************************************/ static void ads1242_perform_selfgain_calibration(FAR struct ads1242_dev_s *dev) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_SELF_GAIN_CALIB); SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_perform_selfoffset_calibration ****************************************************************************/ static void ads1242_perform_selfoffset_calibration(FAR struct ads1242_dev_s *dev) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_SELF_OFFSET_CALIB); SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_perform_systemoffset_calibration ****************************************************************************/ static void ads1242_perform_systemoffset_calibration(FAR struct ads1242_dev_s *dev) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_SYSTEM_OFFSET_CALIB); SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_read_conversion_result ****************************************************************************/ static void ads1242_read_conversion_result(FAR struct ads1242_dev_s *dev, FAR uint32_t *conversion_result) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_READ_DATA); /* Delay between last SCLK edge for DIN and first SCLK edge for DOUT: * RDATA, RDATAC, RREG, WREG: Min 50 x tOSC Periods */ up_udelay(50 * dev->osc_period_us); *conversion_result = 0; /* 1st Byte = MSB * 2nd Byte = Mid-Byte * 3rd Byte = LSB */ *conversion_result |= ((uint32_t)(SPI_SEND(dev->spi, 0xff))) << 16; *conversion_result |= ((uint32_t)(SPI_SEND(dev->spi, 0xff))) << 8; *conversion_result |= ((uint32_t)(SPI_SEND(dev->spi, 0xff))) << 0; SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_write_reg * * Description: * Write to the registers starting with the register address specified as * part of the instruction. The number of registers that will be written * is one plus the value of the second byte. * ****************************************************************************/ static void ads1242_write_reg(FAR struct ads1242_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_value) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_WRITE_REGISTER | reg_addr); SPI_SEND(dev->spi, 0x00); /* Write 1 Byte */ SPI_SEND(dev->spi, reg_value); SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_read_reg * * Description: * Output the data from up to 16 registers starting with the register * address specified as part of the instruction. The number of registers * read will be one plus the second byte count. If the count exceeds the * remaining registers, the addresses wrap back to the beginning. * ****************************************************************************/ static void ads1242_read_reg(FAR struct ads1242_dev_s *dev, uint8_t const reg_addr, FAR uint8_t *reg_value) { ads1242_lock(dev->spi); SPI_SELECT(dev->spi, 0, true); SPI_SEND(dev->spi, ADS1242_CMD_READ_REGISTER | reg_addr); SPI_SEND(dev->spi, 0x00); /* Read 1 Byte */ /* Delay between last SCLK edge for DIN and first SCLK edge for DOUT: * RDATA, RDATAC, RREG, WREG: Min 50 x tOSC Periods */ up_udelay(50 * dev->osc_period_us); *reg_value = SPI_SEND(dev->spi, 0xff); SPI_SELECT(dev->spi, 0, false); ads1242_unlock(dev->spi); } /**************************************************************************** * Name: ads1242_set_gain ****************************************************************************/ static void ads1242_set_gain(FAR struct ads1242_dev_s *dev, ADS1242_GAIN_SELECTION const gain_selection) { uint8_t setup_reg_value = 0; ads1242_read_reg(dev, ADS1242_REG_SETUP, &setup_reg_value); setup_reg_value &= ~(ADS1242_REG_SETUP_BIT_PGA2 | ADS1242_REG_SETUP_BIT_PGA1 | ADS1242_REG_SETUP_BIT_PGA0); setup_reg_value |= (uint8_t)(gain_selection); ads1242_write_reg(dev, ADS1242_REG_SETUP, setup_reg_value); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) ads1242_print_regs(dev, "ads1242_set_gain"); #endif /* It is necessary to perform a offset calibration after setting the gain */ ads1242_perform_selfoffset_calibration(dev); } /**************************************************************************** * Name: ads1242_set_positive_input ****************************************************************************/ static void ads1242_set_positive_input(FAR struct ads1242_dev_s *dev, ADS1242_POSITIVE_INPUT_SELECTION const pos_in_sel) { uint8_t mux_reg_value = 0; ads1242_read_reg(dev, ADS1242_REG_MUX, &mux_reg_value); mux_reg_value &= ~(ADS1242_REG_MUX_BIT_PSEL3 | ADS1242_REG_MUX_BIT_PSEL2 | ADS1242_REG_MUX_BIT_PSEL1 | ADS1242_REG_MUX_BIT_PSEL0); mux_reg_value |= (uint8_t)(pos_in_sel); ads1242_write_reg(dev, ADS1242_REG_MUX, mux_reg_value); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) ads1242_print_regs(dev, "ads1242_set_positive_input"); #endif } /**************************************************************************** * Name: ads1242_set_negative_input ****************************************************************************/ static void ads1242_set_negative_input(FAR struct ads1242_dev_s *dev, ADS1242_NEGATIVE_INPUT_SELECTION const neg_in_sel) { uint8_t mux_reg_value = 0; ads1242_read_reg(dev, ADS1242_REG_MUX, &mux_reg_value); mux_reg_value &= ~(ADS1242_REG_MUX_BIT_NSEL3 | ADS1242_REG_MUX_BIT_NSEL2 | ADS1242_REG_MUX_BIT_NSEL1 | ADS1242_REG_MUX_BIT_NSEL0); mux_reg_value |= (uint8_t)(neg_in_sel); ads1242_write_reg(dev, ADS1242_REG_MUX, mux_reg_value); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) ads1242_print_regs(dev, "ads1242_set_negative_input"); #endif } /**************************************************************************** * Name: ads1242_set_negative_input ****************************************************************************/ static bool ads1242_is_data_ready(FAR struct ads1242_dev_s *dev) { uint8_t acr_reg_value = 0xff; ads1242_read_reg(dev, ADS1242_REG_ACR, &acr_reg_value); return (acr_reg_value & ADS1242_REG_ACR_BIT_NDRDY) == 0; } /**************************************************************************** * Name: ads1242_print_regs ****************************************************************************/ #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) static void ads1242_print_regs(FAR struct ads1242_dev_s *dev, char const *msg) { uint8_t setup_reg_value = 0; uint8_t mux_reg_value = 0; uint8_t acr_reg_value = 0; ainfo("%s\n", msg); ads1242_read_reg(dev, ADS1242_REG_SETUP, &setup_reg_value); ads1242_read_reg(dev, ADS1242_REG_MUX, &mux_reg_value); ads1242_read_reg(dev, ADS1242_REG_ACR, &acr_reg_value); ainfo("SETUP %02X\n", setup_reg_value); ainfo("MUX %02X\n", mux_reg_value); ainfo("ACR %02X\n", acr_reg_value); } #endif /* CONFIG_DEBUG_FEATURES && CONFIG_DEBUG_INFO */ /**************************************************************************** * Name: ads1242_open ****************************************************************************/ static int ads1242_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct ads1242_dev_s *priv = inode->i_private; ads1242_reset(priv); up_mdelay(100); ads1242_perform_selfgain_calibration(priv); up_mdelay(100); /* SPEED = 1 -> fMod = fOsc / 256 (fMod = Modulator Clock Speed) * BUFEN = 1 -> Internal input buffer enabled -> results in a very high * impedance input for the ADC ~ 5 GOhm */ ads1242_write_reg(priv, ADS1242_REG_ACR, ADS1242_REG_ACR_BIT_SPEED | ADS1242_REG_ACR_BIT_BUFEN); ads1242_perform_selfoffset_calibration(priv); up_mdelay(100); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_INFO) ads1242_print_regs(priv, "ads1242_open"); #endif return OK; } /**************************************************************************** * Name: ads1242_close ****************************************************************************/ static int ads1242_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct ads1242_dev_s *priv = inode->i_private; ads1242_reset(priv); up_mdelay(100); return OK; } /**************************************************************************** * Name: ads1242_read ****************************************************************************/ static ssize_t ads1242_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: ads1242_write ****************************************************************************/ static ssize_t ads1242_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: ads1242_ioctl ****************************************************************************/ static int ads1242_ioctl (FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct ads1242_dev_s *priv = inode->i_private; int ret = OK; switch (cmd) { /* Read the result of an analog conversion */ case ANIOC_ADS2142_READ: { FAR uint32_t *data = (FAR uint32_t *)((uintptr_t)arg); ads1242_read_conversion_result(priv, data); } break; /* Set the gain of the ADC */ case ANIOC_ADS2142_SET_GAIN: { ads1242_set_gain(priv, (ADS1242_GAIN_SELECTION)(arg)); } break; /* Set the positive input of the ADC */ case ANIOC_ADS2142_SET_POSITIVE_INPUT: { ads1242_set_positive_input(priv, (ADS1242_POSITIVE_INPUT_SELECTION)(arg)); } break; /* Set the negative input of the ADC */ case ANIOC_ADS2142_SET_NEGATIVE_INPUT: { ads1242_set_negative_input(priv, (ADS1242_NEGATIVE_INPUT_SELECTION)(arg)); } break; /* Check if data is ready to be read */ case ANIOC_ADS2142_IS_DATA_READY: { FAR bool *is_data_ready = (FAR bool *)((uintptr_t)arg); *is_data_ready = ads1242_is_data_ready(priv); } break; /* Perform a system offset calibration - Note: Zero input signal must * be applied. */ case ANIOC_ADS2142_DO_SYSTEM_OFFSET_CALIB: { ads1242_perform_systemoffset_calibration(priv); } break; /* Command was not recognized */ default: _err("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: ads1242_register * * Description: * Register the ADS1242 character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/ads1242" * spi - An instance of the SPI interface to use to communicate with * ADS1242 * osc_freq_hz - The frequency of the ADS1242 oscillator in Hz. Required * for calculating the minimum delay periods when accessing * the device via SPI. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int ads1242_register(FAR const char *devpath, FAR struct spi_dev_s *spi, uint32_t const osc_freq_hz) { FAR struct ads1242_dev_s *priv; int ret; /* Sanity check */ DEBUGASSERT(spi != NULL); /* Initialize the ADS1242 device structure */ priv = (FAR struct ads1242_dev_s *)kmm_malloc(sizeof(struct ads1242_dev_s)); if (priv == NULL) { _err("ERROR: Failed to allocate instance\n"); return -ENOMEM; } priv->spi = spi; float const osc_period_us = (1000.0 * 1000.0) / ((float)(osc_freq_hz)); priv->osc_period_us = (uint32_t)(osc_period_us); /* Register the character driver */ ret = register_driver(devpath, &g_ads1242_fops, 0666, priv); if (ret < 0) { _err("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); } return ret; } #endif /* CONFIG_SPI && CONFIG_ADC_ADS1242 */