/**************************************************************************** * net/uip/uip-tcp.h * Header file for the uIP TCP/IP stack. * * The uIP TCP/IP stack header file contains definitions for a number * of C macros that are used by uIP programs as well as internal uIP * structures, TCP/IP header structures and function declarations. * * Copyright (C) 2007 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * This logic was leveraged from uIP which also has a BSD-style license: * * Author Adam Dunkels * Copyright (c) 2001-2003, Adam Dunkels. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __NET_UIP_UIP_TCP_H #define __NET_UIP_UIP_TCP_H /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET_TCP #include #include /**************************************************************************** * Definitions ****************************************************************************/ /* TCP definitions */ #define TCP_FIN 0x01 #define TCP_SYN 0x02 #define TCP_RST 0x04 #define TCP_PSH 0x08 #define TCP_ACK 0x10 #define TCP_URG 0x20 #define TCP_CTL 0x3f #define TCP_OPT_END 0 /* End of TCP options list */ #define TCP_OPT_NOOP 1 /* "No-operation" TCP option */ #define TCP_OPT_MSS 2 /* Maximum segment size TCP option */ #define TCP_OPT_MSS_LEN 4 /* Length of TCP MSS option. */ /* The TCP states used in the struct uip_conn tcpstateflags field */ #define UIP_CLOSED 0 /* The connection is not in use and available */ #define UIP_ALLOCATED 1 /* The connection is allocated, but not yet initialized */ #define UIP_SYN_RCVD 2 #define UIP_SYN_SENT 3 #define UIP_ESTABLISHED 4 #define UIP_FIN_WAIT_1 5 #define UIP_FIN_WAIT_2 6 #define UIP_CLOSING 7 #define UIP_TIME_WAIT 8 #define UIP_LAST_ACK 9 #define UIP_TS_MASK 15 #define UIP_STOPPED 16 /* Flag bits in 16-bit flags+ipoffset IPv4 TCP header field */ #define UIP_TCPFLAG_RESERVED 0x8000 #define UIP_TCPFLAG_DONTFRAG 0x4000 #define UIP_TCPFLAG_MOREFRAGS 0x2000 /* TCP header sizes */ #define UIP_TCPH_LEN 20 /* Size of TCP header */ #define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN) /* Size of IP + TCP header */ #define UIP_TCPIP_HLEN UIP_IPTCPH_LEN /**************************************************************************** * Public Type Definitions ****************************************************************************/ /* Representation of a uIP TCP connection. * * The uip_conn structure is used for identifying a connection. All * but one field in the structure are to be considered read-only by an * application. The only exception is the "private: field whos purpose * is to let the application store application-specific state (e.g., * file pointers) for the connection. */ struct uip_driver_s; /* Forward reference */ struct uip_callback_s; /* Forward reference */ struct uip_conn { dq_entry_t node; /* Implements a doubly linked list */ #if 0 /* Not used */ uip_ipaddr_t lipaddr; /* The local IP address */ #endif uip_ipaddr_t ripaddr; /* The IP address of the remote host */ uint16 lport; /* The local TCP port, in network byte order */ uint16 rport; /* The remoteTCP port, in network byte order */ uint8 rcv_nxt[4]; /* The sequence number that we expect to * receive next */ uint8 snd_nxt[4]; /* The sequence number that was last sent by us */ uint16 len; /* Length of the data that was previously sent */ uint16 mss; /* Current maximum segment size for the * connection */ uint16 initialmss; /* Initial maximum segment size for the * connection */ uint8 sa; /* Retransmission time-out calculation state * variable */ uint8 sv; /* Retransmission time-out calculation state * variable */ uint8 rto; /* Retransmission time-out */ uint8 tcpstateflags; /* TCP state and flags */ uint8 timer; /* The retransmission timer (units: half-seconds) */ uint8 nrtx; /* The number of retransmissions for the last * segment sent */ /* Read-ahead buffering */ #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 sq_queue_t readahead; #endif /* Application callbacks: * * Data transfer events are retained in 'list'. Event handlers in 'list' * are called for events specified in the flags set within struct * uip_callback_s * * When an callback is executed from 'list', the input flags are normally * returned, however, the implementation may set one of the following: * * UIP_CLOSE - Gracefully close the current connection * UIP_ABORT - Abort (reset) the current connection on an error that * prevents UIP_CLOSE from working. * * And/Or set/clear the following: * * UIP_NEWDATA - May be cleared to indicate that the data was consumed * and that no further process of the new data should be * attempted. * UIP_SNDACK - If UIP_NEWDATA is cleared, then UIP_SNDACK may be set * to indicate that an ACK should be included in the response. * (In UIP_NEWDATA is cleared bu UIP_SNDACK is not set, then * dev->d_len should also be cleared). */ struct uip_callback_s *list; /* accept() is called when the TCP logic has created a connection */ void *accept_private; int (*accept)(struct uip_conn *listener, struct uip_conn *conn); /* connection_event() is called on any of the subset of connection-related events */ void *connection_private; void (*connection_event)(struct uip_conn *conn, uint16 flags); }; /* The following structure is used to handle read-ahead buffering for TCP * connection. When incoming TCP data is received while no application is * listening for the data, that data will be retained in these read-ahead * buffers so that no data is lost. */ #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 struct uip_readahead_s { sq_entry_t rh_node; /* Supports a singly linked list */ uint16 rh_nbytes; /* Number of bytes available in this buffer */ uint8 rh_buffer[CONFIG_NET_TCP_READAHEAD_BUFSIZE]; }; #endif /* The structure holding the TCP/IP statistics that are gathered if * CONFIG_NET_STATISTICS is defined. */ #ifdef CONFIG_NET_STATISTICS struct uip_tcp_stats_s { uip_stats_t drop; /* Number of dropped TCP segments */ uip_stats_t recv; /* Number of received TCP segments */ uip_stats_t sent; /* Number of sent TCP segments */ uip_stats_t chkerr; /* Number of TCP segments with a bad checksum */ uip_stats_t ackerr; /* Number of TCP segments with a bad ACK number */ uip_stats_t rst; /* Number of received TCP RST (reset) segments */ uip_stats_t rexmit; /* Number of retransmitted TCP segments */ uip_stats_t syndrop; /* Number of dropped SYNs due to too few available connections */ uip_stats_t synrst; /* Number of SYNs for closed ports triggering a RST */ }; #endif /* The TCP and IP headers */ struct uip_tcpip_hdr { #ifdef CONFIG_NET_IPv6 /* IPv6 Ip header */ uint8 vtc; /* Bits 0-3: version, bits 4-7: traffic class (MS) */ uint8 tcf; /* Bits 0-3: traffic class (LS), 4-bits: flow label (MS) */ uint16 flow; /* 16-bit flow label (LS) */ uint8 len[2]; /* 16-bit Payload length */ uint8 proto; /* 8-bit Next header (same as IPv4 protocol field) */ uint8 ttl; /* 8-bit Hop limit (like IPv4 TTL field) */ uip_ip6addr_t srcipaddr; /* 128-bit Source address */ uip_ip6addr_t destipaddr; /* 128-bit Destination address */ #else /* CONFIG_NET_IPv6 */ /* IPv4 IP header */ uint8 vhl; /* 8-bit Version (4) and header length (5 or 6) */ uint8 tos; /* 8-bit Type of service (e.g., 6=TCP) */ uint8 len[2]; /* 16-bit Total length */ uint8 ipid[2]; /* 16-bit Identification */ uint8 ipoffset[2]; /* 16-bit IP flags + fragment offset */ uint8 ttl; /* 8-bit Time to Live */ uint8 proto; /* 8-bit Protocol */ uint16 ipchksum; /* 16-bit Header checksum */ uint16 srcipaddr[2]; /* 32-bit Source IP address */ uint16 destipaddr[2]; /* 32-bit Destination IP address */ #endif /* CONFIG_NET_IPv6 */ /* TCP header */ uint16 srcport; uint16 destport; uint8 seqno[4]; uint8 ackno[4]; uint8 tcpoffset; uint8 flags; uint8 wnd[2]; uint16 tcpchksum; uint8 urgp[2]; uint8 optdata[4]; }; /**************************************************************************** * Public Data ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /* uIP application functions * * Functions used by an application running of top of uIP. This includes * functions for opening and closing connections, sending and receiving * data, etc. * * Find a free connection structure and allocate it for use. This is * normally something done by the implementation of the socket() API */ extern struct uip_conn *uip_tcpalloc(void); /* Allocate a new TCP data callback */ #define uip_tcpcallbackalloc(conn) uip_callbackalloc(&conn->list) #define uip_tcpcallbackfree(conn,cb) uip_callbackfree(cb, &conn->list) /* Free a connection structure that is no longer in use. This should * be done by the implementation of close() */ extern void uip_tcpfree(struct uip_conn *conn); /* Bind a TCP connection to a local address */ #ifdef CONFIG_NET_IPv6 extern int uip_tcpbind(struct uip_conn *conn, const struct sockaddr_in6 *addr); #else extern int uip_tcpbind(struct uip_conn *conn, const struct sockaddr_in *addr); #endif /* This function implements the UIP specific parts of the standard * TCP connect() operation: It connects to a remote host using TCP. * * This function is used to start a new connection to the specified * port on the specied host. It uses the connection structure that was * allocated by a preceding socket() call. It sets the connection to * the SYN_SENT state and sets the retransmission timer to 0. This will * cause a TCP SYN segment to be sent out the next time this connection * is periodically processed, which usually is done within 0.5 seconds * after the call to uip_tcpconnect(). * * This function is called from normal user level code. */ #ifdef CONFIG_NET_IPv6 extern int uip_tcpconnect(struct uip_conn *conn, const struct sockaddr_in6 *addr); #else extern int uip_tcpconnect(struct uip_conn *conn, const struct sockaddr_in *addr); #endif /* Start listening to the port bound to the specified TCP connection */ extern int uip_listen(struct uip_conn *conn); /* Stop listening to the port bound to the specified TCP connection */ extern int uip_unlisten(struct uip_conn *conn); /* Check if a connection has outstanding (i.e., unacknowledged) data */ #define uip_outstanding(conn) ((conn)->len) /* Access to TCP read-ahead buffers */ #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 extern struct uip_readahead_s *uip_tcpreadaheadalloc(void); extern void uip_tcpreadaheadrelease(struct uip_readahead_s *buf); #endif /* CONFIG_NET_NTCP_READAHEAD_BUFFERS */ /* Tell the sending host to stop sending data. * * This function will close our receiver's window so that we stop * receiving data for the current connection. */ #define uip_stop(conn) ((conn)->tcpstateflags |= UIP_STOPPED) /* Find out if the current connection has been previously stopped with * uip_stop(). */ #define uip_stopped(conn) ((conn)->tcpstateflags & UIP_STOPPED) /* Restart the current connection, if is has previously been stopped * with uip_stop(). * * This function will open the receiver's window again so that we * start receiving data for the current connection. */ #define uip_restart(conn,f) \ do { \ (f) |= UIP_NEWDATA; \ (conn)->tcpstateflags &= ~UIP_STOPPED; \ } while(0) /* Get the initial maxium segment size (MSS) of the current * connection. */ #define uip_initialmss(conn) ((conn)->initialmss) /* Get the current maxium segment size that can be sent on the current * connection. * * The current maxiumum segment size that can be sent on the * connection is computed from the receiver's window and the MSS of * the connection (which also is available by calling * uip_initialmss()). */ #define uip_mss(conn) ((conn)->mss) #endif /* CONFIG_NET_TCP */ #endif /* __NET_UIP_UIP_TCP_H */