/**************************************************************************** * include/signal.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __INCLUDE_SIGNAL_H #define __INCLUDE_SIGNAL_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Signal set management definitions and macros. */ #define MIN_SIGNO 1 /* Lowest valid signal number */ #define MAX_SIGNO 63 /* Highest valid signal number */ /* Definitions for "standard" signals */ #define SIGSTDMIN 1 /* First standard signal number */ #define SIGSTDMAX 31 /* Last standard signal number */ /* Definitions for "real time" signals */ #define SIGRTMIN (SIGSTDMAX + 1) /* First real time signal */ #define SIGRTMAX MAX_SIGNO /* Last real time signal */ #define _NSIG (MAX_SIGNO + 1) /* Biggest signal number + 1 */ #define NSIG _NSIG /* _NSIG variant commonly used */ /* sigset_t is represented as an array of 32-b unsigned integers. * _SIGSET_NELEM is the allocated isze of the array */ #define _SIGSET_NELEM ((_NSIG + 31) >> 5) /* NuttX does not support all standard signal actions. NuttX supports what * are referred to as "real time" signals. The default action of all NuttX * signals is to simply ignore the signal. Certain signals can be * configured to support there default actions as indicated by NOTEs to the * following table. * * This is not POSIX compliant behavior! Per OpenGroup.org: The following * signals and default signal actions must be supported on all * implementations: * * ---------- ------- ---------------------------------------------------- * Signal Default Description * Name Action * ---------- ------- ---------------------------------------------------- * SIGABRT A Process abort signal * SIGALRM T (1) Alarm clock * SIGBUS A Access to an undefined portion of a memory object * SIGCHLD I Child process terminated, stopped * (or continued XSI extension) * SIGCONT C (2) Continue executing, if stopped * SIGFPE A Erroneous arithmetic operation * SIGHUP T Hangup * SIGILL A Illegal instruction * SIGINT T (3) Terminal interrupt signal * SIGKILL T (3) Kill (cannot be caught or ignored) * SIGPIPE T (7) Write on a pipe with no one to read it * SIGQUIT A Terminal quit signal * SIGSEGV A Invalid memory reference * SIGSTOP S (2) Stop executing (cannot be caught or ignored) * SIGTERM T Termination signal * SIGTSTP S (2) Terminal stop signal * SIGTTIN S Background process attempting read * SIGTTOU S Background process attempting write * SIGUSR1 T (4) User-defined signal 1 * SIGUSR2 T (5) User-defined signal 2 * SIGPOLL T (6) Poll-able event (XSI extension) * SIGPROF T Profiling timer expired (XSI extension) * SIGSYS A Bad system call (XSI extension) * SIGTRAP A Trace/breakpoint trap (XSI extension) * SIGURG I High bandwidth data is available at a socket * SIGVTALRM T Virtual timer expired (XSI extension) * SIGXCPU A CPU time limit exceeded (XSI extension) * SIGXFSZ A File size limit exceeded (XSI extension) * ---------- ------- ---------------------------------------------------- * * Where default action codes are: * * T Abnormal termination of the process. The process is terminated with * all the consequences of _exit() except that the status made available * to wait() and waitpid() indicates abnormal termination by the * specified signal. * A Abnormal termination of the process. Additionally with the XSI * extension, implementation-defined abnormal termination actions, such * as creation of a core file, may occur. * I Ignore the signal. * S Stop the process. * C Continue the process, if it is stopped; otherwise, ignore the signal. * * NOTES: * (1) The default action can be enabled with CONFIG_SIG_SIGALRM_ACTION * (2) The default action can be enabled with CONFIG_SIG_SIGSTOP_ACTION * (3) The default action can be enabled with CONFIG_SIG_SIGKILL_ACTION * (4) The default action can be enabled with CONFIG_SIG_SIGUSR1_ACTION * (5) The default action can be enabled with CONFIG_SIG_SIGUSR2_ACTION * (6) The default action can be enabled with CONFIG_SIG_SIGPOLL_ACTION * (7) The default action can be enabled with CONFIG_SIG_SIGPIPE_ACTION */ /* A few of the real time signals are used within the OS. They have * default values that can be overridden from the configuration file. The * rest are all standard or user real-time signals. * * The signal number zero is wasted for the most part. It is a valid * signal number, but has special meaning at many interfaces (e.g., Kill()). * * These are the semi-standard signal definitions: */ #define SIGHUP 1 #define SIGINT 2 #define SIGQUIT 3 #define SIGILL 4 #define SIGTRAP 5 #define SIGABRT 6 #define SIGBUS 7 #define SIGFPE 8 #define SIGKILL 9 #define SIGUSR1 10 /* User signal 1 */ #define SIGSEGV 11 #define SIGUSR2 12 /* User signal 2 */ #define SIGPIPE 13 #define SIGALRM 14 /* Default signal used with POSIX timers (used only */ /* no other signal is provided) */ #define SIGTERM 15 #define SIGCHLD 17 #define SIGCONT 18 #define SIGSTOP 19 #define SIGTSTP 20 #define SIGTTIN 21 #define SIGTTOU 22 #define SIGURG 23 #define SIGXCPU 24 #define SIGXFSZ 25 #define SIGVTALRM 26 #define SIGPROF 27 #define SIGWINCH 28 #define SIGPOLL 29 #define SIGIO SIGPOLL #define SIGSYS 31 /* sigprocmask() "how" definitions. * Only one of the following can be specified: */ #define SIG_BLOCK 1 /* Block the given signals */ #define SIG_UNBLOCK 2 /* Unblock the given signals */ #define SIG_SETMASK 3 /* Set the signal mask to the current set */ /* struct sigaction flag values */ #define SA_NOCLDSTOP (1 << 0) /* Do not generate SIGCHLD when * children stop (ignored) */ #define SA_SIGINFO (1 << 1) /* Invoke the signal-catching function * with 3 args instead of 1 * (always assumed) */ #define SA_NOCLDWAIT (1 << 2) /* If signo=SIGCHLD, exit status of child * processes will be discarded */ #define SA_ONSTACK (1 << 3) /* Indicates that a registered stack_t * will be used */ #define SA_RESTART (1 << 4) /* Flag to get restarting signals * (which were the default long ago) */ #define SA_NODEFER (1 << 5) /* Prevents the current signal from * being masked in the handler */ #define SA_RESETHAND (1 << 6) /* Clears the handler when the signal * is delivered */ #define SA_KERNELHAND (1 << 7) /* Invoke the handler in kernel space directly */ /* These are the possible values of the signfo si_code field */ #define SI_USER 0 /* Signal sent from kill, raise, or abort */ #define SI_QUEUE 1 /* Signal sent from sigqueue */ #define SI_TIMER 2 /* Signal is result of timer expiration */ #define SI_ASYNCIO 3 /* Signal is the result of asynch IO completion */ #define SI_MESGQ 4 /* Signal generated by arrival of a message on an */ /* empty message queue */ #define CLD_EXITED 5 /* Child has exited (SIGCHLD only) */ #define CLD_KILLED 6 /* Child was killed (SIGCHLD only) */ #define CLD_DUMPED 7 /* Child terminated abnormally (SIGCHLD only) */ #define CLD_TRAPPED 8 /* Traced child has trapped (SIGCHLD only) */ #define CLD_STOPPED 9 /* Child has stopped (SIGCHLD only) */ #define CLD_CONTINUED 10 /* Stopped child had continued (SIGCHLD only) */ /* Values for the sigev_notify field of struct sigevent */ #define SIGEV_NONE 0 /* No asynchronous notification is delivered */ #define SIGEV_SIGNAL 1 /* Notify via signal,with an application-defined value */ #ifdef CONFIG_SIG_EVTHREAD # define SIGEV_THREAD 3 /* A notification function is called */ #endif /* sigaltstack stack size */ #define MINSIGSTKSZ CONFIG_PTHREAD_STACK_MIN /* Smallest signal stack size */ #define SIGSTKSZ CONFIG_PTHREAD_STACK_DEFAULT /* Default signal stack size */ /* define signal handlers stack on an alternate stack or the current thread */ #define SS_ONSTACK 1 #define SS_DISABLE 2 /* Special values of sa_handler used by sigaction and sigset. They are all * treated like NULL for now. This is okay for SIG_DFL and SIG_IGN because * in NuttX, the default action for all signals is to ignore them. */ #define SIG_ERR ((_sa_handler_t)-1) /* And error occurred */ #define SIG_IGN ((_sa_handler_t)0) /* Ignore the signal */ #ifdef CONFIG_SIG_DEFAULT # define SIG_DFL ((_sa_handler_t)1) /* Default signal action */ # define SIG_HOLD ((_sa_handler_t)2) /* Used only with sigset() */ #else # define SIG_DFL ((_sa_handler_t)0) /* Default is SIG_IGN for all signals */ # define SIG_HOLD ((_sa_handler_t)1) /* Used only with sigset() */ #endif #define GOOD_SIGNO(s) (((unsigned)(s)) <= MAX_SIGNO) #define UNCAUGHT_SIGNO(s) ((s) == SIGKILL || (s) == SIGSTOP) #define tkill(tid, signo) tgkill((pid_t)-1, tid, signo) /**************************************************************************** * Public Types ****************************************************************************/ /* This defines a set of 32 signals (numbered 0 through 31). * REVISIT: Signal 0 is, however, not generally usable since that value has * special meaning in some circumstances (e.g., kill()). */ struct sigset_s { uint32_t _elem[_SIGSET_NELEM]; }; typedef struct sigset_s sigset_t; /* Bit set of _NSIG signals */ /* Possibly volatile-qualified integer type of an object that can be accessed * as an atomic entity, even in the presence of asynchronous interrupts. */ typedef volatile int sig_atomic_t; /* This defines the type of the siginfo si_value field */ union sigval { int sival_int; /* Integer value */ FAR void *sival_ptr; /* Pointer value */ }; /* This structure contains elements that define a queue signal. * The following is used to attach a signal to a message queue * to notify a task when a message is available on a queue. */ typedef CODE void (*sigev_notify_function_t)(union sigval value); struct sigevent { uint8_t sigev_notify; /* Notification method: SIGEV_SIGNAL, SIGEV_NONE, or SIGEV_THREAD */ uint8_t sigev_signo; /* Notification signal */ union sigval sigev_value; /* Data passed with notification */ #ifdef CONFIG_SIG_EVTHREAD sigev_notify_function_t sigev_notify_function; /* Notification function */ FAR struct pthread_attr_s *sigev_notify_attributes; /* Notification attributes (not used) */ #endif }; /* The following types is used to pass parameters to/from signal handlers */ struct siginfo { uint8_t si_signo; /* Identifies signal */ uint8_t si_code; /* Source: SI_USER, SI_QUEUE, SI_TIMER, SI_ASYNCIO, or SI_MESGQ */ uint8_t si_errno; /* Zero or errno value associated with signal */ union sigval si_value; /* Data passed with signal */ #ifdef CONFIG_SCHED_HAVE_PARENT pid_t si_pid; /* Sending task ID */ int si_status; /* Exit value or signal (SIGCHLD only). */ #endif #if 0 /* Not implemented */ FAR void *si_addr; /* Report address with SIGFPE, SIGSEGV, or SIGBUS */ #endif FAR void *si_user; /* The User info associated with sigaction */ }; typedef struct siginfo siginfo_t; /* Non-standard convenience definition of signal handling function types. * These should be used only internally within the NuttX signal logic. */ typedef CODE void (*_sa_handler_t)(int signo); typedef CODE void (*_sa_sigaction_t)(int signo, FAR siginfo_t *siginfo, FAR void *context); /* glibc definition of signal handling function types */ typedef _sa_handler_t sighandler_t; /* The following structure defines the action to take for given signal */ struct sigaction { union { _sa_handler_t _sa_handler; _sa_sigaction_t _sa_sigaction; } sa_u; sigset_t sa_mask; int sa_flags; FAR void *sa_user; }; /* Definitions that adjust the non-standard naming */ #define sa_handler sa_u._sa_handler #define sa_sigaction sa_u._sa_sigaction /* Structure describing a signal stack. */ typedef struct { FAR void *ss_sp; int ss_flags; size_t ss_size; } stack_t; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif int kill(pid_t pid, int signo); int killpg(pid_t pgrp, int signo); int tgkill(pid_t pid, pid_t tid, int signo); void psignal(int signum, FAR const char *message); void psiginfo(FAR const siginfo_t *pinfo, FAR const char *message); int raise(int signo); int sigaction(int signo, FAR const struct sigaction *act, FAR struct sigaction *oact); int sigaddset(FAR sigset_t *set, int signo); int sigandset(FAR sigset_t *dest, FAR const sigset_t *left, FAR const sigset_t *right); int sigdelset(FAR sigset_t *set, int signo); int sigemptyset(FAR sigset_t *set); int sigfillset(FAR sigset_t *set); int sighold(int signo); int sigisemptyset(FAR sigset_t *set); int sigismember(FAR const sigset_t *set, int signo); int sigignore(int signo); _sa_handler_t signal(int signo, _sa_handler_t func); int sigorset(FAR sigset_t *dest, FAR const sigset_t *left, FAR const sigset_t *right); int sigpause(int signo); int sigpending(FAR sigset_t *set); int sigprocmask(int how, FAR const sigset_t *set, FAR sigset_t *oset); int sigqueue(int pid, int signo, union sigval value); int sigrelse(int signo); _sa_handler_t sigset(int signo, _sa_handler_t func); int sigwait(FAR const sigset_t *set, FAR int *sig); int sigtimedwait(FAR const sigset_t *set, FAR struct siginfo *value, FAR const struct timespec *timeout); int sigsuspend(FAR const sigset_t *sigmask); int sigwaitinfo(FAR const sigset_t *set, FAR struct siginfo *value); int sigaltstack(FAR const stack_t *ss, FAR stack_t *oss); #undef EXTERN #ifdef __cplusplus } #endif #endif /* __INCLUDE_SIGNAL_H */