=================
Nordic nRF9160 DK
=================

The `nRF9160-DK (PCA10090) <https://www.nordicsemi.com/Products/Development-hardware/nrf9160-dk>`_
is a development board based on the nRF9160 from Nordic.

Serial Console
==============

Serial console for the application core:

===== ============ =============
Pin   Signal       Notes
===== ============ =============
P0.28 APP UART0 TX virtual COM 0
P0.29 APP UART0 RX virtual COM 0
===== ============ =============

Serial console for the MCUBOOT (secure domain):

===== ============ =============
Pin   Signal       Notes
===== ============ =============
P0.00 APP UART1 TX virtual COM 2
P0.01 APP UART1 RX virtual COM 2
===== ============ =============

LEDs and Buttons
================

LEDs
----
The PCA10090 has 4 user-controllable LEDs:

====  =======
LED   MCU
====  =======
LED1  P0.02
LED2  P0.03
LED3  P0.04
LED4  P0.05
====  =======

A low output illuminates the LED.

CONFIG_ARCH_LEDS
----------------

If CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under
control of the application.  The following interfaces are then available
for application control of the LEDs::

  uint32_t board_userled_initialize(void);
  void board_userled(int led, bool ledon);
  void board_userled_all(uint32_t ledset);

Pushbuttons
-----------

=======  =======
BUTTON   MCU
=======  =======
BUTTON1  P0.06
BUTTON2  P0.07
=======  =======

Configurations
==============

Each configuration is maintained in a sub-directory and can be selected as
follow::

  tools/configure.sh nrf9160-dk:<subdir>

Where <subdir> is one of the following:

nsh
----

Basic NuttShell configuration (console enabled in UART0, exposed via J-Link VCOM connection,
at 115200 bps).

ostest_tickless
---------------

This is a NSH configuration that includes ``apps/testing/ostest`` as a builtin and
enable support for the tick-less OS.