/**************************************************************************** * net/sixlowpan/sixlowpan.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef _NET_SIXLOWPAN_SIXLOWPAN_H #define _NET_SIXLOWPAN_SIXLOWPAN_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #ifdef CONFIG_NET_6LOWPAN /**************************************************************************** * Public Types ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ struct net_driver_s; /* Forward reference */ struct ipv6_hdr_s; /* Forward reference */ struct socket; /* Forward reference */ struct sockaddr; /* Forward reference */ /**************************************************************************** * Name: sixlowpan_initialize * * Description: * sixlowpan_initialize() is called during OS initialization at power-up * reset. It is called from the common net_setup() function. * sixlowpan_initialize() configures 6LoWPAN networking data structures. * It is called prior to platform-specific driver initialization so that * the 6LoWPAN networking subsystem is prepared to deal with network * driver initialization actions. * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ void sixlowpan_initialize(void); /**************************************************************************** * Name: psock_6lowpan_tcp_send * * Description: * psock_6lowpan_tcp_send() call may be used only when the TCP socket is in * a connected state (so that the intended recipient is known). * * Input Parameters: * psock - An instance of the internal socket structure. * buf - Data to send * len - Length of data to send * * Returned Value: * On success, returns the number of characters sent. On error, * -1 is returned, and errno is set appropriately. Returned error numbers * must be consistent with definition of errors reported by send() or * sendto(). * * Assumptions: * Called with the network locked. * ****************************************************************************/ #ifdef CONFIG_NET_TCP ssize_t psock_6lowpan_tcp_send(FAR struct socket *psock, FAR const void *buf, size_t len); #endif /**************************************************************************** * Name: sixlowpan_tcp_send * * Description: * TCP output comes through three different mechansims. Either from: * * 1. TCP socket output. For the case of TCP output to an * IEEE802.15.4, the TCP output is caught in the socket * send()/sendto() logic and and redirected to psock_6lowpan_tcp_send(). * 2. TCP output from the TCP state machine. That will occur * during TCP packet processing by the TCP state meachine. * 3. TCP output resulting from TX or timer polling * * Cases 2 and 3 will be handled here. Logic in ipv6_tcp_input(), * devif_poll(), and devif_timer() detect if (1) an attempt to return with * d_len > 0 and (2) that the device is an IEEE802.15.4 MAC network * driver. Under those conditions, this function will be called to create * the IEEE80215.4 frames. * * Input Parameters: * dev - The network device containing the packet to be sent. * fwddev - The network device used to send the data. This will be the * same device except for the IP forwarding case where packets * are sent across devices. * ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER * the L1 header. NOTE: dev->d_len must have been decremented * by the size of any preceding MAC header. * * Returned Value: * None * * Assumptions: * Called with the network locked. * ****************************************************************************/ void sixlowpan_tcp_send(FAR struct net_driver_s *dev, FAR struct net_driver_s *fwddev, FAR struct ipv6_hdr_s *ipv6); /**************************************************************************** * Name: sixlowpan_icmpv6_send * * Description: * All outgoing ICMPv6 messages come through one of two mechanisms: * * 1. The output from internal ICMPv6 message passing. These outgoing * messages will use device polling. * 2. ICMPv6 output resulting from TX or timer polling. * * Both cases are handled here. * * Input Parameters: * dev - The network device containing the packet to be sent. * fwddev - The network device used to send the data. This will be the * same device except for the IP forwarding case where packets * are sent across devices. * ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER * the L1 header. NOTE: dev->d_len must have been decremented * by the size of any preceding MAC header. * * Returned Value: * None * * Assumptions: * Called with the network locked. * ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6 void sixlowpan_icmpv6_send(FAR struct net_driver_s *dev, FAR struct net_driver_s *fwddev, FAR struct ipv6_hdr_s *ipv6); #endif /**************************************************************************** * Name: psock_6lowpan_udp_send * * Description: * psock_6lowpan_udp_send() call may be used with connectionlesss UDP * sockets. * * Input Parameters: * psock - An instance of the internal socket structure. * buf - Data to send * len - Length of data to send * * Returned Value: * On success, returns the number of characters sent. On error, * -1 is returned, and errno is set appropriately. Returned error numbers * must be consistent with definition of errors reported by send() or * sendto(). * * Assumptions: * Called with the network locked. * ****************************************************************************/ #ifdef CONFIG_NET_UDP ssize_t psock_6lowpan_udp_send(FAR struct socket *psock, FAR const void *buf, size_t len); #endif /**************************************************************************** * Name: psock_6lowpan_udp_sendto * * Description: * If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET) * socket, the parameters to and 'tolen' are ignored (and the error EISCONN * may be returned when they are not NULL and 0), and the error ENOTCONN is * returned when the socket was not actually connected. * * Input Parameters: * psock A pointer to a NuttX-specific, internal socket structure * buf Data to send * len Length of data to send * flags Send flags * to Address of recipient * tolen The length of the address structure * * Returned Value: * On success, returns the number of characters sent. On error, * -1 is returned, and errno is set appropriately. Returned error * number must be consistent with definition of errors reported by * sendto(). * * Assumptions: * Called with the network locked. * ****************************************************************************/ ssize_t psock_6lowpan_udp_sendto(FAR struct socket *psock, FAR const void *buf, size_t len, int flags, FAR const struct sockaddr *to, socklen_t tolen); /**************************************************************************** * Name: sixlowpan_udp_send * * Description: * Handles forwarding a UDP packet via 6LoWPAN. This is currently only * used by the IPv6 forwarding logic. * * Input Parameters: * dev - An instance of network device state structure * fwddev - The network device used to send the data. This will be the * same device except for the IP forwarding case where packets * are sent across devices. * ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER * the L1 header. NOTE: dev->d_len must have been decremented * by the size of any preceding MAC header. * * Returned Value: * None * * Assumptions: * Called with the network locked. * ****************************************************************************/ #ifdef CONFIG_NET_IPFORWARD void sixlowpan_udp_send(FAR struct net_driver_s *dev, FAR struct net_driver_s *fwddev, FAR struct ipv6_hdr_s *ipv6); #endif #endif /* CONFIG_NET_6LOWPAN */ #endif /* _NET_SIXLOWPAN_SIXLOWPAN_H */