# # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # choice prompt "Select target board" default ARCH_BOARD_CUSTOM ---help--- Select the board hosting the architure. You must first select the exact MCU part number, then the boards supporting that part will be available for selection. Use ARCH_BOARD_CUSTOM to create a new board configuration. config ARCH_BOARD_AMBER bool "Amber Web Server" depends on ARCH_CHIP_ATMEGA128 ---help--- This is placeholder for the SoC Robotics Amber Web Server that is based on the Atmel AVR ATMega128 MCU. There is not much there yet and what is there is untested due to tool-related issues. config ARCH_BOARD_AVR32DEV1 bool "Atmel AVR32DEV1 board" depends on ARCH_CHIP_AT32UC3B0256 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a port of NuttX to the Atmel AVR32DEV1 board. That board is based on the Atmel AT32UC3B0256 MCU and uses a specially patched version of the GNU toolchain: The patches provide support for the AVR32 family. That patched GNU toolchain is available only from the Atmel website. STATUS: This port is functional but very basic. There are configurations for NSH and the OS test. config ARCH_BOARD_C5471EVM bool "Spectrum Digital C5471 evaluation board" depends on ARCH_CHIP_C5471 select ARCH_HAVE_LEDS ---help--- This is a port to the Spectrum Digital C5471 evaluation board. The TMS320C5471 is a dual core processor from TI with an ARM7TDMI general purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180. NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*. This port is complete and verified. config ARCH_BOARD_CLOUDCTRL bool "Darcy's CloudController stm32f10x board" depends on ARCH_CHIP_STM32F107VC ---help--- Small network relay development board. Based on the Shenzhou IV development board design. config ARCH_BOARD_COMPALE88 bool "Compal e88 phone" depends on ARCH_CHIP_CALYPSO ---help--- These directories contain the board support for compal e88 and e99 phones. These ports are based on patches contributed by Denis Carikli for both the compal e99 and e88. The patches were made by Alan Carvalho de Assis and Denis Carikli using the Stefan Richter's Osmocom-bb patches. config ARCH_BOARD_COMPALE99 bool "Compal e99 phone" depends on ARCH_CHIP_CALYPSO ---help--- These directories contain the board support for compal e88 and e99 phones. These ports are based on patches contributed by Denis Carikli for both the compal e99 and e88. The patches were made by Alan Carvalho de Assis and Denis Carikli using the Stefan Richter's Osmocom-bb patches. config ARCH_BOARD_DEMOS92S12NEC64 bool "Freescale DMO9S12NE64 board" depends on ARCH_CHIP_MCS92S12NEC64 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it is code complete but has not yet been verified. config ARCH_BOARD_EA3131 bool "Embedded Artists EA3131 Development board" depends on ARCH_CHIP_LPC3131 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3131 Development board. This board is based on the an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EA3152 bool "Embedded Artists EA3152 Development board" depends on ARCH_CHIP_LPC3152 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3152 Development board. This board is based on the an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is has not be exercised well, but since it is a simple derivative of the ea3131, it should be fully functional. config ARCH_BOARD_EAGLE100 bool "Micromint Eagle-100 Development board" depends on ARCH_CHIP_LM3S6918 select ARCH_HAVE_LEDS ---help--- Micromint Eagle-100 Development board. This board is based on the an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EKKLM3S9B96 bool "TI/Stellaris EKK-LM3S9B96" depends on ARCH_CHIP_LM3S9B96 select ARCH_HAVE_LEDS ---help--- TI/Stellaris EKK-LM3S9B96 board. This board is based on the an EKK-LM3S9B96 which is a Cortex-M3. config ARCH_BOARD_EZ80F910200KITG bool "ZiLOG ez80f910200kitg development kit" depends on ARCH_CHIP_EZ80F91 select ARCH_HAVE_LEDS ---help--- ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f910200kitg development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_EZ80F910200ZCO bool "ZiLOG ez80f910200zco development kit" depends on ARCH_CHIP_EZ80F91 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_FREEDOM_KL25Z bool "Freescale Freedom KL25Z" depends on ARCH_CHIP_MKL25Z128 select ARCH_HAVE_LEDS ---help--- This is the configuration for the Freescale Freedom KL25Z board. This board has the K25Z120LE3AN chip with a built-in SDA debugger. config ARCH_BOARD_HYMINI_STM32V bool "HY-Mini STM32v board" depends on ARCH_CHIP_STM32F103VCT select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the HY-Mini STM32v board. This board is based on the STM32F103VCT chip. config ARCH_BOARD_LINCOLN60 bool "Micromint Lincoln 60 board" depends on ARCH_CHIP_LPC1769 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Micromint Lincoln 60 board using the NXP LPC1769 MCU. config ARCH_BOARD_KWIKSTIK_K40 bool "FreeScale KwikStik-K40 development board" depends on ARCH_CHIP_MK40X256VLQ100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40 development board. config ARCH_BOARD_LM3S6432S2E bool "Stellaris RDK-S2E Reference Design Kit" depends on ARCH_CHIP_LM3S6432 select ARCH_HAVE_LEDS ---help--- Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to Serial module. config ARCH_BOARD_LM3S6965EK bool "Stellaris LM3S6965 Evaluation Kit" depends on ARCH_CHIP_LM3S6965 select ARCH_HAVE_LEDS ---help--- Stellaris LM3S6965 Evaluation Kit. This board is based on the an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_LM3S8962EK bool "Stellaris LMS38962 Evaluation Kit" depends on ARCH_CHIP_LM3S8962 select ARCH_HAVE_LEDS ---help--- Stellaris LMS38962 Evaluation Kit. config ARCH_BOARD_LM4F120_LAUNCHPAD bool "Stellaris LM4F120 LaunchPad" depends on ARCH_CHIP_LM4F120 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Stellaris LM4F120 LaunchPad. config ARCH_BOARD_LPCXPRESSO bool "NXP LPCExpresso LPC1768" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- Embedded Artists base board with NXP LPCExpresso LPC1768. This board is based on the NXP LPC1768. The Code Red toolchain is used by default. config ARCH_BOARD_LPC4330_XPLORER bool "NXG LPC4330-Xplorer" depends on ARCH_CHIP_LPC4330FET100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- NXG Technologoies LPC4330 Xplorer board. This board is based on the LPC4330FET100. The Code Red toolchain is used by default. config ARCH_BOARD_M68332EVB bool "Motoroloa M68332EVB" depends on ARCH_M68332 ---help--- This is a work in progress for the venerable m68322evb board from Motorola. This OS is also built with the arm-nuttx-elf toolchain. STATUS: This port was never completed. config ARCH_BOARD_MBED bool "mbed LCP1768" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- The configurations in this directory support the mbed board (http://mbed.org) that features the NXP LPC1768 microcontroller. This OS is also built with the arm-nuttx-elf toolchain*. STATUS: Contributed. config ARCH_BOARD_MCU123 bool "mcu123.com LPC2148 Development Board" depends on ARCH_CHIP_LPC2148 select ARCH_HAVE_LEDS ---help--- This port is for the NXP LPC2148 as provided on the mcu123.com lpc214x development board. This OS is also built with the arm-nuttx-elf toolchain*. The port supports serial, timer0, spi, and usb. config ARCH_BOARD_MICROPENDOUS3 bool "Opendous Micropendous 3 board" depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287 ---help--- This is a port to the Opendous Micropendous 3 board. This board may be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU. Support is configured for the AT90USB647. config ARCH_BOARD_MX1ADS bool "Motorola MX1ADS development board" depends on ARCH_CHIP_IMX1 select ARCH_HAVE_LEDS ---help--- This is a port to the Motorola MX1ADS development board. That board is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T. STATUS: This port is nearly code complete but was never fully integrated due to tool-related issues. config ARCH_BOARD_NE64BADGE bool "FEG NE64 /PoE Badge board" depends on ARCH_CHIP_MCS92S12NEC64 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Future Electronics Group NE64 /PoE Badge board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. STATUS: Under development. The port is code-complete but has not yet been fully tested. config ARCH_BOARD_NTOSD_DM320 bool "Neuros OSD v1.0 Dev Board" depends on ARCH_CHIP_DM320 select ARCH_HAVE_LEDS ---help--- This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf toolchain*: see http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home There are some differences between the Dev Board and the currently available commercial v1.0 Boards. See http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1 NuttX operates on the ARM9EJS of this dual core processor. STATUS: This port is code complete, verified, and included in the NuttX 0.2.1 release. config ARCH_BOARD_NUCLEUS2G bool "Nucleus 2G board" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- This port uses the Nucleus 2G board (with Babel CAN board). This board features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/) for more information about the Nucleus 2G. config ARCH_BOARD_LPC1766STK bool "Olimex LPC1766-STK board" depends on ARCH_CHIP_LPC1766 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under Linux or Cygwin. STATUS: Complete and mature. config ARCH_BOARD_MIRTOO bool "Mirtoo PIC32 Module from Dimitech" depends on ARCH_CHIP_PIC32MX250F128D select ARCH_HAVE_LEDS ---help--- This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip PIC32MX250F128D. See http://www.dimitech.com/ for further information. config ARCH_BOARD_NUTINY_NUC120 bool "Nuvoton NuTiny NUC120" depends on ARCH_CHIP_NUC120LE3AN select ARCH_HAVE_LEDS ---help--- This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/ for further information. config ARCH_BOARD_OLIMEXLPC2378 bool "Olimex-lpc2378 board" depends on ARCH_CHIP_LPC2378 select ARCH_HAVE_LEDS ---help--- This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. STATUS: ostest and NSH configurations available. This port for the NXP LPC2378 was contributed by Rommel Marcelo. config ARCH_BOARD_OLIMEX_STRP711 bool "Olimex STR-P711 board" depends on ARCH_CHIP_STR71X select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for further information. STATUS: Configurations for the basic OS test and NSH are complete and verified. config ARCH_BOARD_OLIMEX_STM32P107 bool "Olimex STM32 P107 board" depends on ARCH_CHIP_STM32F107VC ---help--- This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F107VC MCU config ARCH_BOARD_OPEN1788 bool "Wave Share Open1788" depends on ARCH_CHIP_LPC1788 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Wave Share Open1788 board. See the http://wvshare.com/product/Open1788-Standard.htm for further information. This board features the NXP LPC1788 MCU config ARCH_BOARD_P112 bool "P112 Z180-based platform" depends on ARCH_CHIP_Z8018216FSG ---help--- The P112 is notable because it was the first of the hobbyist single board computers to reach the production stage. The P112 hobbyist computers were relatively widespread and inspired other hobbyist centered home brew computing projects such as N8VEM home brew computing project. The P112 project still maintains many devoted enthusiasts and has an online repository of software and other information. The P112 computer originated as a commercial product of "D-X Designs Pty Ltd" of Australia. They describe the computer as "The P112 is a stand-alone 8-bit CPU board. Typically running CP/M (tm) or a similar operating system, it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial, parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor. Powered solely from 5V, it draws 150mA (nominal: not including disk drives) with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible." The P112 board was last available new in 1996 by Dave Brooks. In late 2004 on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112 boards was discussed. David Griffith decided to produce additional P112 kits with Dave Brooks blessing and the assistance of others. In addition Terry Gulczynski makes additional P112 derivative hobbyist home brew computers. Hal Bower was very active in the mid 1990's on the P112 project and ported the "Banked/Portable BIOS". config ARCH_BOARD_PCBLOGICPIC32MX bool "PIC32MX board from PCB Logic Design Co" depends on ARCH_CHIP_PIC32MX460F512L ---help--- This is the port of NuttX to the PIC32MX board from PCB Logic Design Co. This board features the MicroChip PIC32MX460F512L. The board is a very simple -- little more than a carrier for the PIC32 MCU plus voltage regulation, debug interface, and an OTG connector. STATUS: Code complete but testing has been stalled due to tool related problems (PICkit 2 does not work with the PIC32). config ARCH_BOARD_PIC32_STARTERKIT bool "Microchip PIC32 Ethernet Starter Kit (DM320004)" depends on ARCH_CHIP_PIC32MX795F512L select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005). See www.microchip.com for further information. config ARCH_BOARD_PIC32_PIC32MX7MMB bool "Mikroelektronika PIC32MX7 MMB" depends on ARCH_CHIP_PIC32MX795F512L select ARCH_HAVE_LEDS ---help--- This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board (MMB). See http://www.mikroe.com/ for further information. config ARCH_BOARD_PJRC_87C52 bool "PJRC 87C52 development system" depends on ARCH_CHIP_8052 select ARCH_HAVE_LEDS ---help--- 8051 Microcontroller. This port uses the PJRC 87C52 development system and the SDCC toolchain. This port is not quite ready for prime time. config ARCH_BOARD_QEMU_I486 bool "Qemu i486 Mode" depends on ARCH_X86 || ARCH_I486 ---help--- Port of NuttX to QEMU in i486 mode. This port will also run on real i486 hardwared (Google the Bifferboard). config ARCH_BOARD_RGMP bool "RGMP" depends on ARCH_RGMP ---help--- RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for running GPOS and RTOS simultaneously on multi-processor platforms. You can port your favorite RTOS to RGMP together with an unmodified Linux to form a hybrid operating system. This makes your application able to use both RTOS and GPOS features. See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further information about RGMP. config ARCH_BOARD_SAM3UEK bool "Atmel SAM3U-EK development board" depends on ARCH_CHIP_AT91SAM3U4E select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM3U-EK development board. config ARCH_BOARD_SHENZHOU bool "Shenzhou STM32F107 board" depends on ARCH_CHIP_STM32F107VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.armjishu.com for further information. This board features the STMicro STM32F107VC MCU config ARCH_BOARD_SKP16C26 bool "Renesas SKP16C26 StarterKit" depends on ARCH_CHIP_M30262F8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port uses the GNU m32c toolchain. STATUS: The port is complete but untested due to issues with compiler internal errors. config ARCH_BOARD_STM3210E_EVAL bool "STMicro STM3210E-EVAL development board" depends on ARCH_CHIP_STM32F103ZET6 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3 toolchain. config ARCH_BOARD_STM3220G_EVAL bool "STMicro STM3220G-EVAL development board" depends on ARCH_CHIP_STM32F207IG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG microcontroller (ARM Cortex-M3). config ARCH_BOARD_STM3240G_EVAL bool "STMicro STM3240G-EVAL development board" depends on ARCH_CHIP_STM32F407IG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4 toolchain (such as CodeSourcery). config ARCH_BOARD_STM32F100RC_GENERIC bool "STMicro STM32F100RC generic board" depends on ARCH_CHIP_STM32F100RC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F100RC generic board. config ARCH_BOARD_STM32F3_DISCOVERY bool "STMicro STM32F3-Discovery board" depends on ARCH_CHIP_STM32F303VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F3-Discovery board based on the STMicro ARCH_CHIP_STM32F303VCT6 MCU. config ARCH_BOARD_STM32F4_DISCOVERY bool "STMicro STM32F4-Discovery board" depends on ARCH_CHIP_STM32F407VG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU. config ARCH_BOARD_SUREPIC32MX bool "Sure PIC32MX boards" depends on ARCH_CHIP_PIC32MX440F512H select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics (http://www.sureelectronics.net/). This board features the MicroChip PIC32MX440F512H. See also http://www.sureelectronics.net/goods.php?id=1168 for further information about the Sure DB-DP11215 board. config ARCH_BOARD_TEENSY bool "PJRC Teensy++ 2.0 board" depends on ARCH_CHIP_AT90USB1286 select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU. config ARCH_BOARD_TWR_K60N512 bool "FreeScale TWR-K60N512d evelopment board" depends on ARCH_CHIP_MK60N512VMD100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512 development board. config ARCH_BOARD_UBW32 bool "UBW32 v2.4 board from Sparkfun" depends on ARCH_CHIP_PIC32MX460F512L select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the port to the Sparkfun UBW32 board. This port uses the original v2.4 board which is based on the MicroChip PIC32MX460F512L. See http://www.sparkfun.com/products/8971. This older version has been replaced with this board http://www.sparkfun.com/products/9713. See also http://www.schmalzhaus.com/UBW32/. config ARCH_BOARD_US7032EVB1 bool "Hitachi SH-1/US7032EVB1 board" depends on ARCH_CHIP_SH7032 select ARCH_HAVE_LEDS ---help--- This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board. STATUS: Work has just began on this port. config ARCH_BOARD_VSN bool "SOTEL NetClamps VSN sensor network platform" depends on ARCH_CHIP_STM32F103RET6 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the STMicro STM32F103RET6. Contributed by Uros Platise. See http://isotel.eu/NetClamps/ config ARCH_BOARD_XTRS bool "XTRS TRS80 Model 3 emulation" depends on ARCH_CHIP_Z80 select ARCH_HAVE_UART ---help--- TRS80 Model 3. This port uses a vintage computer based on the Z80. An emulator for this computer is available to run TRS80 programs on a linux platform (http://www.tim-mann.org/xtrs.html). config ARCH_BOARD_Z16F2800100ZCOG bool "Zilog Z16F2800100ZCOG Development Kit" depends on ARCH_CHIP_Z16F2811 select ARCH_HAVE_LEDS ---help--- z16f Microcontroller. This port use the ZiLIG z16f2800100zcog development kit and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_Z80SIM bool "Z80 Instruction Set Simulator" depends on ARCH_CHIP_Z80 select ARCH_HAVE_UART ---help--- z80 Microcontroller. This port uses a Z80 instruction set simulator. That simulator can be found in the NuttX GIT at http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/sims/z80sim. This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/") (verified with version 2.6.0). config ARCH_BOARD_Z8ENCORE000ZCO bool "ZiLOG Z8ENCORE000ZCO Development Kit" depends on ARCH_CHIP_Z8F6403 select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_Z8F64200100KIT bool "ZiLOG Z8F64200100KIT Development Kit" depends on ARCH_CHIP_Z8F6423 select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_ZP214XPA bool "The0.net LPC2148 Development Board" depends on ARCH_CHIP_LPC2148 ---help--- This port is for the NXP LPC2148 as provided on the The0.net ZPA213X/4XPA development board. Includes support for the UG-2864AMBAG01 OLED also from The0.net config ARCH_BOARD_ZKITARM bool "Zilogic ZKit-ARM-1769 Development Kit" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default. config ARCH_BOARD_SIM bool "User mode simulation" depends on ARCH_SIM ---help--- A user-mode port of NuttX to the x86 Linux/Cygwin platform is available. The purpose of this port is primarily to support OS feature development. This port does not support interrupts or a real timer (and hence no round robin scheduler) Otherwise, it is complete. config ARCH_BOARD_CUSTOM bool "Custom development board" ---help--- Select this option if there is no directory for the board under configs/. Don't see the board you want? You must first select the exact MCU part number, then the boards supporting that part will be available for selection. endchoice config ARCH_BOARD string default "amber" if ARCH_BOARD_AMBER default "avr32dev1" if ARCH_BOARD_AVR32DEV1 default "c5471evm" if ARCH_BOARD_C5471EVM default "compal_e88" if ARCH_BOARD_COMPALE88 default "compal_e99" if ARCH_BOARD_COMPALE99 default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64 default "ea3131" if ARCH_BOARD_EA3131 default "ea3152" if ARCH_BOARD_EA3152 default "eagle100" if ARCH_BOARD_EAGLE100 default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96 default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32 default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40 default "lincoln60" if ARCH_BOARD_LINCOLN60 default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO default "m68322evb" if ARCH_BOARD_M68332EVB default "mbed" if ARCH_BOARD_MBED default "mcu123-lpc214x" if ARCH_BOARD_MCU123 default "micropendous3" if ARCH_BOARD_MICROPENDOUS3 default "mirtoo" if ARCH_BOARD_MIRTOO default "mx1ads" if ARCH_BOARD_MX1ADS default "ne64badge" if ARCH_BOARD_NE64BADGE default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320 default "nucleus2g" if ARCH_BOARD_NUCLEUS2G default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120 default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107 default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 default "open1788" if ARCH_BOARD_OPEN1788 default "p112" if ARCH_BOARD_P112 default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB default "pjrc-8051" if ARCH_BOARD_PJRC_87C52 default "qemu-i486" if ARCH_BOARD_QEMU_I486 default "rgmp" if ARCH_BOARD_RGMP default "sam3u-ek" if ARCH_BOARD_SAM3UEK default "shenzhou" if ARCH_BOARD_SHENZHOU default "skp16c26" if ARCH_BOARD_SKP16C26 default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL default "stm32f100rc_generic" if ARCH_BOARD_STM32F100RC_GENERIC default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX default "teensy" if ARCH_BOARD_TEENSY default "twr-k60n512" if ARCH_BOARD_TWR_K60N512 default "ubw32" if ARCH_BOARD_UBW32 default "us7032evb1" if ARCH_BOARD_US7032EVB1 default "vsn" if ARCH_BOARD_VSN default "xtrs" if ARCH_BOARD_XTRS default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG default "z80sim" if ARCH_BOARD_Z80SIM default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT default "zp214xpa" if ARCH_BOARD_ZP214XPA default "zkit-arm-1769" if ARCH_BOARD_ZKITARM default "sim" if ARCH_BOARD_SIM default "" if ARCH_BOARD_CUSTOM comment "Common Board Options" config ARCH_HAVE_LEDS bool config ARCH_LEDS bool "Board LED support" default y depends on ARCH_HAVE_LEDS ---help--- Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs config ARCH_HAVE_BUTTONS bool config ARCH_BUTTONS bool "Board button support" default n depends on ARCH_HAVE_BUTTONS ---help--- "Support interfaces to use buttons provided by the board." config ARCH_HAVE_IRQBUTTONS bool config ARCH_IRQBUTTONS bool "Button interrupt support" default n depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS ---help--- "Support interrupts on button presses and releases." config NSH_MMCSDMINOR int "MMC/SD minor number" default 0 depends on NSH_LIBRARY && MMCSD ---help--- If board-specific NSH start-up logic needs to mount an MMC/SD device, then the setting should be provided to identify the MMC/SD minor device number (i.e., the N in /dev/mmcsdN). Default 0 config NSH_MMCSDSLOTNO int "MMC/SD slot number" default 0 depends on NSH_LIBRARY && MMCSD ---help--- If board-specific NSH start-up supports more than one MMC/SD slot, then this setting should be provided to indicate which slot should be used. Default: 0. config NSH_MMCSDSPIPORTNO int "MMC/SD SPI device number" default 0 depends on NSH_LIBRARY && MMCSD && MMCSD_SPI ---help--- If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this setting may be needed to tell the board logic which SPI bus to use. Default: 0 (meaning is board-specific). comment "Board-Specific Options" if ARCH_BOARD_AMBER source "configs/amber/Kconfig" endif if ARCH_BOARD_AVR32DEV1 source "configs/avr32dev1/Kconfig" endif if ARCH_BOARD_C5471EVM source "configs/c5471evm/Kconfig" endif if ARCH_BOARD_COMPALE88 source "configs/compal_e88/Kconfig" endif if ARCH_BOARD_COMPALE99 source "configs/compal_e99/Kconfig" endif if ARCH_BOARD_DEMOS92S12NEC64 source "configs/demo9s12ne64/Kconfig" endif if ARCH_BOARD_EA3131 source "configs/ea3131/Kconfig" endif if ARCH_BOARD_EA3152 source "configs/ea3152/Kconfig" endif if ARCH_BOARD_EAGLE100 source "configs/eagle100/Kconfig" endif if ARCH_BOARD_EKKLM3S9B96 source "configs/ekk-lm3s9b96/Kconfig" endif if ARCH_BOARD_EZ80F910200KITG source "configs/ez80f910200kitg/Kconfig" endif if ARCH_BOARD_EZ80F910200ZCO source "configs/ez80f910200zco/Kconfig" endif if ARCH_BOARD_FIRE_STM32 source "configs/fire-stm32v2/Kconfig" endif if ARCH_BOARD_HYMINI_STM32V source "configs/hymini-stm32v/Kconfig" endif if ARCH_BOARD_KWIKSTIK_K40 source "configs/kwikstik-k40/Kconfig" endif if ARCH_BOARD_LINCOLN60 source "configs/lincoln60/Kconfig" endif if ARCH_BOARD_LM3S6432S2E source "configs/lm3s6432-s2e/Kconfig" endif if ARCH_BOARD_LM3S6965EK source "configs/lm3s6965-ek/Kconfig" endif if ARCH_BOARD_LM3S8962EK source "configs/lm3s8962-ek/Kconfig" endif if ARCH_BOARD_LM3S8962EK source "configs/lm4f120-launchpad/Kconfig" endif if ARCH_BOARD_LPC4330_XPLORER source "configs/lpc4330-xplorer/Kconfig" endif if ARCH_BOARD_LPCXPRESSO source "configs/lpcxpresso-lpc1768/Kconfig" endif if ARCH_BOARD_M68332EVB source "configs/m68332evb/Kconfig" endif if ARCH_BOARD_MBED source "configs/mbed/Kconfig" endif if ARCH_BOARD_MCU123 source "configs/mcu123-lpc214x/Kconfig" endif if ARCH_BOARD_MICROPENDOUS3 source "configs/micropendous3/Kconfig" endif if ARCH_BOARD_MIRTOO source "configs/mirtoo/Kconfig" endif if ARCH_BOARD_MX1ADS source "configs/mx1ads/Kconfig" endif if ARCH_BOARD_NE64BADGE source "configs/ne64badge/Kconfig" endif if ARCH_BOARD_NTOSD_DM320 source "configs/ntosd-dm320/Kconfig" endif if ARCH_BOARD_NUCLEUS2G source "configs/nucleus2g/Kconfig" endif if ARCH_BOARD_NUTINY_NUC120 source "configs/nutiny-nuc120/Kconfig" endif if ARCH_BOARD_LPC1766STK source "configs/olimex-lpc1766stk/Kconfig" endif if ARCH_BOARD_OLIMEXLPC2378 source "configs/olimex-lpc2378/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32P107 source "configs/olimex-stm32-p107/Kconfig" endif if ARCH_BOARD_OLIMEX_STRP711 source "configs/olimex-strp711/Kconfig" endif if ARCH_BOARD_OPEN1788 source "configs/open1788/Kconfig" endif if ARCH_BOARD_PCBLOGICPIC32MX source "configs/pcblogic-pic32mx/Kconfig" endif if ARCH_BOARD_PIC32_STARTERKIT source "configs/pic32-starterkit/Kconfig" endif if ARCH_BOARD_PIC32_PIC32MX7MMB source "configs/pic32mx7mmb/Kconfig" endif if ARCH_BOARD_PJRC_87C52 source "configs/pjrc-8051/Kconfig" endif if ARCH_BOARD_QEMU_I486 source "configs/qemu-i486/Kconfig" endif if ARCH_BOARD_RGMP source "configs/rgmp/Kconfig" endif if ARCH_BOARD_SAM3UEK source "configs/sam3u-ek/Kconfig" endif if ARCH_BOARD_SHENZHOU source "configs/shenzhou/Kconfig" endif if ARCH_BOARD_SKP16C26 source "configs/skp16c26/Kconfig" endif if ARCH_BOARD_STM3210E_EVAL source "configs/stm3210e-eval/Kconfig" endif if ARCH_BOARD_STM3220G_EVAL source "configs/stm3220g-eval/Kconfig" endif if ARCH_BOARD_STM3240G_EVAL source "configs/stm3240g-eval/Kconfig" endif if ARCH_BOARD_STM32F100RC_GENERIC source "configs/stm32f100rc_generic/Kconfig" endif if ARCH_BOARD_STM32F4_DISCOVERY source "configs/stm32f4discovery/Kconfig" endif if ARCH_BOARD_SUREPIC32MX source "configs/sure-pic32mx/Kconfig" endif if ARCH_BOARD_TEENSY source "configs/teensy/Kconfig" endif if ARCH_BOARD_TWR_K60N512 source "configs/twr-k60n512/Kconfig" endif if ARCH_BOARD_UBW32 source "configs/ubw32/Kconfig" endif if ARCH_BOARD_US7032EVB1 source "configs/us7032evb1/Kconfig" endif if ARCH_BOARD_VSN source "configs/vsn/Kconfig" endif if ARCH_BOARD_XTRS source "configs/xtrs/Kconfig" endif if ARCH_BOARD_Z16F2800100ZCOG source "configs/z16f2800100zcog/Kconfig" endif if ARCH_BOARD_Z80SIM source "configs/z80sim/Kconfig" endif if ARCH_BOARD_Z8ENCORE000ZCO source "configs/z8encore000zco/Kconfig" endif if ARCH_BOARD_Z8F64200100KIT source "configs/z8f64200100kit/Kconfig" endif if ARCH_BOARD_ZP214XPA source "configs/zp214xpa/Kconfig" endif if ARCH_BOARD_ZKITARM source "configs/zkit-arm-1769/Kconfig" endif if ARCH_BOARD_SIM source "configs/sim/Kconfig" endif