/****************************************************************************
 * boards/mips/pic32mx/ubw32/src/pic32_usbdev.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdbool.h>
#include <debug.h>

#include <nuttx/usb/usbdev.h>

#include "pic32mx.h"
#include "ubw32.h"

#if defined(CONFIG_PIC32MX_USBDEV)

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: pic32mx_usbdevinitialize
 *
 * Description:
 *   Called to configure the mini-A/B J5 on the UBW32 for the
 *   USB device
 *
 ****************************************************************************/

void weak_function pic32mx_usbdevinitialize(void)
{
  /* Notes from the Sure Electronics sample code:
   *
   * "The USB specifications require that USB peripheral devices must never
   *  source current onto the Vbus pin.  Additionally, USB peripherals should
   *  not source current on D+ or D- when the host/hub is not actively
   *  powering the Vbus line.
   *  When designing a self powered (as opposed to bus powered) USB
   *  peripheral device, the firmware should make sure not to turn on the
   *  USB module and D+ or D- pull up resistor unless Vbus is actively
   *  powered.  Therefore, the firmware needs some means to detect when Vbus
   *  is being powered by the host.
   *  A 5V tolerant I/O pin can be connected to Vbus (through a resistor),
   *  and can be used to detect when Vbus is high (host actively powering),
   *  or low (host is shut down or otherwise not supplying power).  The USB
   *  firmware can then periodically poll this I/O pin to know when it is
   *  okay to turn on the USB module/D+/D- pull up resistor.  When designing
   *  a purely bus powered peripheral device, it is not possible to source
   *  current on D+ or D- when the host is not actively providing power on
   *  Vbus.  Therefore, implementing this bus sense feature is optional. ..."
   */

#ifdef CONFIG_USBHOST
#endif

  /* "If the host PC sends a GetStatus (device) request, the firmware must
   *  respond and let the host know if the USB peripheral device is currently
   *  bus powered or self powered.
   *  See chapter 9 in the official USB specifications for details
   *  regarding this request.
   *  If the peripheral device is capable of being both self and bus powered,
   *  it should not return a hard coded value for this request.
   *  Instead, firmware should check if it is currently self or bus powered,
   *  and respond accordingly.
   *  If the hardware has been configured like demonstrated on the PICDEM FS
   *  USB Demo Board, an I/O pin can be polled to determine the
   *  currently selected power source. ..."
   */

#ifdef CONFIG_USB_PWRSENSE
#endif
}

/****************************************************************************
 * Name: pic32mx_usbpullup
 *
 * Description:
 *   If USB is supported and the board supports a pullup via GPIO (for USB
 *   software connect and disconnect), then the board software must provide
 *   pic32mx_usbpullup. See include/nuttx/usb/usbdev.h for additional
 *   description of this method.  Alternatively, if no pull-up GPIO the
 *   following EXTERN can be redefined to be NULL.
 *
 ****************************************************************************/

int pic32mx_usbpullup(struct usbdev_s *dev,  bool enable)
{
  /* The UBW32 does not have a USB pull-up */

  return OK;
}

/****************************************************************************
 * Name: pic32mx_usbsuspend
 *
 * Description:
 *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver
 *   is used.  This function is called whenever the USB enters or leaves
 *   suspend mode. This is an opportunity for the board logic to shutdown
 *   clocks, power, etc. while the USB is suspended.
 *
 ****************************************************************************/

void pic32mx_usbsuspend(struct usbdev_s *dev, bool resume)
{
  /* Do nothing */
}

#endif /* CONFIG_PIC32MX_USBDEV */