/****************************************************************************
 * boards/arm/stm32f7/nucleo-144/scripts/f722-flash.ld
 *
 *   Copyright (C) 2017 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *           Bob Feretich <bob.feretich@rafresearch.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * Change Log:
 * bf20171114 Created from boards/arm/stm32f7/nucleo-144/scripts/f746-flash.ld
 ****************************************************************************/

/* The STM32F722ZE has 512 KiB of main FLASH memory.  This FLASH memory
 * can be accessed from either the AXIM interface at address 0x0800:0000 or
 * from the ITCM interface at address 0x0020:0000.
 *
 * Additional information, including the option bytes, is available at at
 * FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
 *
 * In the STM32F722ZE, two different boot spaces can be selected through
 * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
 * BOOT_ADD1 option bytes:
 *
 *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
 *      ST programmed value: Flash on ITCM at 0x0020:0000
 *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
 *      ST programmed value: System bootloader at 0x0010:0000
 *
 * NuttX does not modify these option bytes.  On the unmodified NUCLEO-144
 * board, the BOOT0 pin is at ground so by default, the STM32F722ZE will
 * boot from address 0x0020:0000 in ITCM FLASH.
 *
 * The STM32F722ZE also has 256 KiB of data SRAM (in addition to ITCM SRAM).
 * SRAM is split up into three blocks:
 *
 *   1)  64 KiB of DTCM SRM beginning at address 0x2000:0000
 *   2) 176 KiB of SRAM1 beginning at address 0x2001:0000
 *   3)  16 KiB of SRAM2 beginning at address 0x2003:c000
 *
 * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
 * where the code expects to begin execution by jumping to the entry point in
 * the 0x0800:0000 address range.
 */

MEMORY
{
  itcm  (rwx) : ORIGIN = 0x00200000, LENGTH = 512K
  flash (rx)  : ORIGIN = 0x08000000, LENGTH = 512K
  dtcm  (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
  sram1 (rwx) : ORIGIN = 0x20010000, LENGTH = 176K
  sram2 (rwx) : ORIGIN = 0x2003c000, LENGTH = 16K
}

OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
SECTIONS
{
    .text : {
        _stext = ABSOLUTE(.);
        *(.vectors)
        *(.text .text.*)
        *(.fixup)
        *(.gnu.warning)
        *(.rodata .rodata.*)
        *(.gnu.linkonce.t.*)
        *(.glue_7)
        *(.glue_7t)
        *(.got)
        *(.gcc_except_table)
        *(.gnu.linkonce.r.*)
        _etext = ABSOLUTE(.);
    } > flash

    .init_section : {
        _sinit = ABSOLUTE(.);
        *(.init_array .init_array.*)
        _einit = ABSOLUTE(.);
    } > flash

    .ARM.extab : {
        *(.ARM.extab*)
    } > flash

    __exidx_start = ABSOLUTE(.);
    .ARM.exidx : {
        *(.ARM.exidx*)
    } > flash
    __exidx_end = ABSOLUTE(.);

    _eronly = ABSOLUTE(.);

    .data : {
        _sdata = ABSOLUTE(.);
        *(.data .data.*)
        *(.gnu.linkonce.d.*)
        CONSTRUCTORS
        . = ALIGN(4);
        _edata = ABSOLUTE(.);
    } > sram1 AT > flash

    .bss : {
        _sbss = ABSOLUTE(.);
        *(.bss .bss.*)
        *(.gnu.linkonce.b.*)
        *(COMMON)
        . = ALIGN(4);
        _ebss = ABSOLUTE(.);
    } > sram1

    /* Stabs debugging sections. */
    .stab 0 : { *(.stab) }
    .stabstr 0 : { *(.stabstr) }
    .stab.excl 0 : { *(.stab.excl) }
    .stab.exclstr 0 : { *(.stab.exclstr) }
    .stab.index 0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
    .comment 0 : { *(.comment) }
    .debug_abbrev 0 : { *(.debug_abbrev) }
    .debug_info 0 : { *(.debug_info) }
    .debug_line 0 : { *(.debug_line) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    .debug_aranges 0 : { *(.debug_aranges) }
}