/**************************************************************************** * fs/procfs/fs_procfsproc.c * * Copyright (C) 2013-2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SCHED_CPULOAD # include #endif #include #if !defined(CONFIG_DISABLE_MOUNTPOINT) && defined(CONFIG_FS_PROCFS) #ifndef CONFIG_FS_PROCFS_EXCLUDE_PROCESS /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Determines the size of an intermediate buffer that must be large enough * to handle the longest line generated by this logic. */ #define STATUS_LINELEN 32 /**************************************************************************** * Private Type Definitions ****************************************************************************/ /* This enumeration identifies all of the task/thread nodes that can be * accessed via the procfs file system. */ enum proc_node_e { PROC_LEVEL0 = 0, /* The top-level directory */ PROC_STATUS, /* Task/thread status */ PROC_CMDLINE, /* Task command line */ #ifdef CONFIG_SCHED_CPULOAD PROC_LOADAVG, /* Average CPU utilization */ #endif PROC_STACK, /* Task stack info */ PROC_GROUP, /* Group directory */ PROC_GROUP_STATUS, /* Task group status */ PROC_GROUP_FD /* Group file descriptors */ }; /* This structure associates a relative path name with an node in the task * procfs */ struct proc_node_s { FAR const char *relpath; /* Relative path to the node */ FAR const char *name; /* Terminal node segment name */ uint8_t node; /* Type of node (see enum proc_node_e) */ uint8_t dtype; /* dirent type (see include/dirent.h) */ }; /* This structure describes one open "file" */ struct proc_file_s { struct procfs_file_s base; /* Base open file structure */ FAR const struct proc_node_s *node; /* Describes the file node */ pid_t pid; /* Task/thread ID */ char line[STATUS_LINELEN]; /* Pre-allocated buffer for formatted lines */ }; /* This structure describes one open "directory" */ struct proc_dir_s { struct procfs_dir_priv_s base; /* Base directory private data */ FAR const struct proc_node_s *node; /* Directory node description */ pid_t pid; /* ID of task/thread for attributes */ }; /**************************************************************************** * Private Data ****************************************************************************/ static FAR const char *g_policy[4] = { "SCHED_FIFO", "SCHED_RR", "SCHED_SPORADIC", "SCHED_OTHER" }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Helpers */ static FAR const struct proc_node_s * proc_findnode(FAR const char *relpath); static ssize_t proc_status(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); static ssize_t proc_cmdline(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); #ifdef CONFIG_SCHED_CPULOAD static ssize_t proc_loadavg(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); #endif static ssize_t proc_stack(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); static ssize_t proc_groupstatus(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); static ssize_t proc_groupfd(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset); /* File system methods */ static int proc_open(FAR struct file *filep, FAR const char *relpath, int oflags, mode_t mode); static int proc_close(FAR struct file *filep); static ssize_t proc_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static int proc_dup(FAR const struct file *oldp, FAR struct file *newp); static int proc_opendir(const char *relpath, FAR struct fs_dirent_s *dir); static int proc_closedir(FAR struct fs_dirent_s *dir); static int proc_readdir(FAR struct fs_dirent_s *dir); static int proc_rewinddir(FAR struct fs_dirent_s *dir); static int proc_stat(FAR const char *relpath, FAR struct stat *buf); /**************************************************************************** * Private Variables ****************************************************************************/ /**************************************************************************** * Public Data ****************************************************************************/ /* See fs_mount.c -- this structure is explicitly externed there. * We use the old-fashioned kind of initializers so that this will compile * with any compiler. */ const struct procfs_operations proc_operations = { proc_open, /* open */ proc_close, /* close */ proc_read, /* read */ NULL, /* write */ proc_dup, /* dup */ proc_opendir, /* opendir */ proc_closedir, /* closedir */ proc_readdir, /* readdir */ proc_rewinddir, /* rewinddir */ proc_stat /* stat */ }; /* These structures provide information about every node */ static const struct proc_node_s g_level0node = { "", "", (uint8_t)PROC_LEVEL0, DTYPE_DIRECTORY /* Top-level directory */ }; static const struct proc_node_s g_status = { "status", "status", (uint8_t)PROC_STATUS, DTYPE_FILE /* Task/thread status */ }; static const struct proc_node_s g_cmdline = { "cmdline", "cmdline", (uint8_t)PROC_CMDLINE, DTYPE_FILE /* Task command line */ }; #ifdef CONFIG_SCHED_CPULOAD static const struct proc_node_s g_loadavg = { "loadavg", "loadavg", (uint8_t)PROC_LOADAVG, DTYPE_FILE /* Average CPU utilization */ }; #endif static const struct proc_node_s g_stack = { "stack", "stack", (uint8_t)PROC_STACK, DTYPE_FILE /* Task stack info */ }; static const struct proc_node_s g_group = { "group", "group", (uint8_t)PROC_GROUP, DTYPE_DIRECTORY /* Group directory */ }; static const struct proc_node_s g_groupstatus = { "group/status", "status", (uint8_t)PROC_GROUP_STATUS, DTYPE_FILE /* Task group status */ }; static const struct proc_node_s g_groupfd = { "group/fd", "fd", (uint8_t)PROC_GROUP_FD, DTYPE_FILE /* Group file descriptors */ }; /* This is the list of all nodes */ static FAR const struct proc_node_s * const g_nodeinfo[] = { &g_status, /* Task/thread status */ &g_cmdline, /* Task command line */ #ifdef CONFIG_SCHED_CPULOAD &g_loadavg, /* Average CPU utilization */ #endif &g_stack, /* Task stack info */ &g_group, /* Group directory */ &g_groupstatus, /* Task group status */ &g_groupfd /* Group file descriptors */ }; #define PROC_NNODES (sizeof(g_nodeinfo)/sizeof(FAR const struct proc_node_s * const)) /* This is the list of all level0 nodes */ static const struct proc_node_s * const g_level0info[] = { &g_status, /* Task/thread status */ &g_cmdline, /* Task command line */ #ifdef CONFIG_SCHED_CPULOAD &g_loadavg, /* Average CPU utilization */ #endif &g_stack, /* Task stack info */ &g_group, /* Group directory */ }; #define PROC_NLEVEL0NODES (sizeof(g_level0info)/sizeof(FAR const struct proc_node_s * const)) /* This is the list of all group sub-directory nodes */ static const struct proc_node_s * const g_groupinfo[] = { &g_groupstatus, /* Task group status */ &g_groupfd /* Group file descriptors */ }; #define PROC_NGROUPNODES (sizeof(g_groupinfo)/sizeof(FAR const struct proc_node_s * const)) /* Names of task/thread states */ static const char *g_statenames[] = { "Invalid", "Pending unlock", "Ready", "Running", "Inactive", "Semaphore wait", #ifndef CONFIG_DISABLE_MQUEUE "Signal wait", #endif #ifndef CONFIG_DISABLE_MQUEUE "MQ not empty wait", "MQ no full wait" #endif }; static const char *g_ttypenames[4] = { "Task", "pthread", "Kernel thread", "--?--" }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: proc_findnode ****************************************************************************/ static FAR const struct proc_node_s *proc_findnode(FAR const char *relpath) { int i; /* Search every string in g_nodeinfo or until a match is found */ for (i = 0; i < PROC_NNODES; i++) { if (strcmp(g_nodeinfo[i]->relpath, relpath) == 0) { return g_nodeinfo[i]; } } /* Not found */ return NULL; } /**************************************************************************** * Name: proc_status ****************************************************************************/ static ssize_t proc_status(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { FAR const char *policy; FAR const char *name; size_t remaining; size_t linesize; size_t copysize; size_t totalsize; remaining = buflen; totalsize = 0; /* Show the task name */ #if CONFIG_TASK_NAME_SIZE > 0 name = tcb->name; #else name = ""; #endif linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%s\n", "Name:", name); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the thread type */ linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%s\n", "Type:", g_ttypenames[(tcb->flags & TCB_FLAG_TTYPE_MASK) >> TCB_FLAG_TTYPE_SHIFT]); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the thread state */ linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%s\n", "State:", g_statenames[tcb->task_state]); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the thread priority */ #ifdef CONFIG_PRIORITY_INHERITANCE linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d (%d)\n", "Priority:", tcb->sched_priority, tcb->base_priority); #else linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d\n", "Priority:", tcb->sched_priority); #endif copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the scheduler policy */ policy = g_policy[(tcb->flags & TCB_FLAG_POLICY_MASK) >> TCB_FLAG_POLICY_SHIFT]; linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%s\n", "Scheduler:", policy); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the signal mask */ #ifndef CONFIG_DISABLE_SIGNALS linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%08x\n", "SigMask:", tcb->sigprocmask); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; #endif return totalsize; } /**************************************************************************** * Name: proc_cmdline ****************************************************************************/ static ssize_t proc_cmdline(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { FAR struct task_tcb_s *ttcb; FAR const char *name; FAR char **argv; size_t remaining; size_t linesize; size_t copysize; size_t totalsize; remaining = buflen; totalsize = 0; /* Show the task name */ #if CONFIG_TASK_NAME_SIZE > 0 name = tcb->name; #else name = ""; #endif linesize = strlen(name); memcpy(procfile->line, name, linesize); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } #ifndef CONFIG_DISABLE_PTHREAD /* Show the pthread argument */ if ((tcb->flags & TCB_FLAG_TTYPE_MASK) == TCB_FLAG_TTYPE_PTHREAD) { FAR struct pthread_tcb_s *ptcb = (FAR struct pthread_tcb_s *)tcb; linesize = snprintf(procfile->line, STATUS_LINELEN, " 0x%p\n", ptcb->arg); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; return totalsize; } #endif /* Show the task argument list (skipping over the name) */ ttcb = (FAR struct task_tcb_s *)tcb; for (argv = ttcb->argv + 1; *argv; argv++) { linesize = snprintf(procfile->line, STATUS_LINELEN, " %s", *argv); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } } linesize = snprintf(procfile->line, STATUS_LINELEN, "\n"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; return totalsize; } /**************************************************************************** * Name: proc_loadavg ****************************************************************************/ #ifdef CONFIG_SCHED_CPULOAD static ssize_t proc_loadavg(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { struct cpuload_s cpuload; uint32_t intpart; uint32_t fracpart; size_t linesize; size_t copysize; /* Sample the counts for the thread. clock_cpuload should only fail if * the PID is not valid. This could happen if the thread exited sometime * after the procfs entry was opened. */ (void)clock_cpuload(procfile->pid, &cpuload); /* On the simulator, you may hit cpuload.total == 0, but probably never on * real hardware. */ if (cpuload.total > 0) { uint32_t tmp; tmp = (1000 * cpuload.active) / cpuload.total; intpart = tmp / 10; fracpart = tmp - 10 * intpart; } else { intpart = 0; fracpart = 0; } linesize = snprintf(procfile->line, STATUS_LINELEN, "%3d.%01d%%", intpart, fracpart); copysize = procfs_memcpy(procfile->line, linesize, buffer, buflen, &offset); return copysize; } #endif /**************************************************************************** * Name: proc_stack ****************************************************************************/ static ssize_t proc_stack(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { size_t remaining; size_t linesize; size_t copysize; size_t totalsize; remaining = buflen; totalsize = 0; /* Show the stack base address */ linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s0x%p\n", "StackBase:", tcb->adj_stack_ptr); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Show the stack size */ linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%ld\n", "StackSize:", (long)tcb->adj_stack_size); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; #ifdef CONFIG_STACK_COLORATION if (totalsize >= buflen) { return totalsize; } /* Show the stack size */ linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%ld\n", "StackUsed:", (long)up_check_tcbstack(tcb)); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; #endif return totalsize; } /**************************************************************************** * Name: proc_groupstatus ****************************************************************************/ static ssize_t proc_groupstatus(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { FAR struct task_group_s *group = tcb->group; size_t remaining; size_t linesize; size_t copysize; size_t totalsize; #ifdef HAVE_GROUP_MEMBERS int i; #endif DEBUGASSERT(group); remaining = buflen; totalsize = 0; /* Show the group IDs */ #ifdef HAVE_GROUP_MEMBERS linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d\n", "Group ID:", group->tg_gid); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d\n", "Parent ID:", group->tg_pgid); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } #endif #if !defined(CONFIG_DISABLE_PTHREAD) && defined(CONFIG_SCHED_HAVE_PARENT) linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d\n", "Main task:", group->tg_task); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } #endif linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s0x%02x\n", "Flags:", group->tg_flags); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } linesize = snprintf(procfile->line, STATUS_LINELEN, "%-12s%d\n", "Members:", group->tg_nmembers); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; #ifdef HAVE_GROUP_MEMBERS if (totalsize >= buflen) { return totalsize; } linesize = snprintf(procfile->line, STATUS_LINELEN, "Member IDs:"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } for (i = 0; i < group->tg_nmembers; i++) { linesize = snprintf(procfile->line, STATUS_LINELEN, " %d"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } } linesize = snprintf(procfile->line, STATUS_LINELEN, "\n"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; #endif return totalsize; } /**************************************************************************** * Name: proc_groupfd ****************************************************************************/ static ssize_t proc_groupfd(FAR struct proc_file_s *procfile, FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen, off_t offset) { FAR struct task_group_s *group = tcb->group; #if CONFIG_NFILE_DESCRIPTORS > 0 /* Guaranteed to be true */ FAR struct file *file; #endif #if CONFIG_NSOCKET_DESCRIPTORS > 0 FAR struct socket *socket; #endif size_t remaining; size_t linesize; size_t copysize; size_t totalsize; int i; DEBUGASSERT(group); remaining = buflen; totalsize = 0; #if CONFIG_NFILE_DESCRIPTORS > 0 /* Guaranteed to be true */ linesize = snprintf(procfile->line, STATUS_LINELEN, "\n%3-s %-8s %s\n", "FD", "POS", "OFLAGS"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Examine each open file descriptor */ for (i = 0, file = group->tg_filelist.fl_files; i < CONFIG_NFILE_DESCRIPTORS; i++, file++) { /* Is there an inode associated with the file descriptor? */ if (file->f_inode) { linesize = snprintf(procfile->line, STATUS_LINELEN, "%3d %8ld %04x\n", i, (long)file->f_pos, file->f_oflags); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } } } #endif #if CONFIG_NSOCKET_DESCRIPTORS > 0 linesize = snprintf(procfile->line, STATUS_LINELEN, "\n%3-s %-2s %-3s %s\n", "SD", "RF", "TYP", "FLAGS"); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } /* Examine each open socket descriptor */ for (i = 0, socket = group->tg_socketlist.sl_sockets; i < CONFIG_NSOCKET_DESCRIPTORS; i++, socket++) { /* Is there an connection associated with the socket descriptor? */ if (socket->s_conn) { linesize = snprintf(procfile->line, STATUS_LINELEN, "%3d %2d %3d %02x", i + CONFIG_NFILE_DESCRIPTORS, (long)socket->s_crefs, socket->s_type, socket->s_flags); copysize = procfs_memcpy(procfile->line, linesize, buffer, remaining, &offset); totalsize += copysize; buffer += copysize; remaining -= copysize; if (totalsize >= buflen) { return totalsize; } } } #endif return totalsize; } /**************************************************************************** * Name: proc_open ****************************************************************************/ static int proc_open(FAR struct file *filep, FAR const char *relpath, int oflags, mode_t mode) { FAR struct proc_file_s *procfile; FAR const struct proc_node_s *node; FAR struct tcb_s *tcb; FAR char *ptr; irqstate_t flags; unsigned long tmp; pid_t pid; fvdbg("Open '%s'\n", relpath); /* PROCFS is read-only. Any attempt to open with any kind of write * access is not permitted. * * REVISIT: Write-able proc files could be quite useful. */ if ((oflags & O_WRONLY) != 0 || (oflags & O_RDONLY) == 0) { fdbg("ERROR: Only O_RDONLY supported\n"); return -EACCES; } /* The first segment of the relative path should be a task/thread ID */ ptr = NULL; tmp = strtoul(relpath, &ptr, 10); if (!ptr || *ptr != '/') { fdbg("ERROR: Invalid path \"%s\"\n", relpath); return -ENOENT; } /* Skip over the slash */ ptr++; /* A valid PID would be in the range of 0-32767 (0 is reserved for the * IDLE thread). */ if (tmp >= 32768) { fdbg("ERROR: Invalid PID %ld\n", tmp); return -ENOENT; } /* Now verify that a task with this task/thread ID exists */ pid = (pid_t)tmp; flags = irqsave(); tcb = sched_gettcb(pid); irqrestore(flags); if (!tcb) { fdbg("ERROR: PID %d is no longer valid\n", (int)pid); return -ENOENT; } /* The remaining segments of the relpath should be a well known node in * the task/thread tree. */ node = proc_findnode(ptr); if (!node) { fdbg("ERROR: Invalid path \"%s\"\n", relpath); return -ENOENT; } /* The node must be a file, not a directory */ if (node->dtype != DTYPE_FILE) { fdbg("ERROR: Path \"%s\" is a directory\n", relpath); return -EISDIR; } /* Allocate a container to hold the task and node selection */ procfile = (FAR struct proc_file_s *)kmm_zalloc(sizeof(struct proc_file_s)); if (!procfile) { fdbg("ERROR: Failed to allocate file container\n"); return -ENOMEM; } /* Initialize the file container */ procfile->pid = pid; procfile->node = node; /* Save the index as the open-specific state in filep->f_priv */ filep->f_priv = (FAR void *)procfile; return OK; } /**************************************************************************** * Name: proc_close ****************************************************************************/ static int proc_close(FAR struct file *filep) { FAR struct proc_file_s *procfile; /* Recover our private data from the struct file instance */ procfile = (FAR struct proc_file_s *)filep->f_priv; DEBUGASSERT(procfile); /* Release the file container structure */ kmm_free(procfile); filep->f_priv = NULL; return OK; } /**************************************************************************** * Name: proc_read ****************************************************************************/ static ssize_t proc_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct proc_file_s *procfile; FAR struct tcb_s *tcb; irqstate_t flags; ssize_t ret; fvdbg("buffer=%p buflen=%d\n", buffer, (int)buflen); /* Recover our private data from the struct file instance */ procfile = (FAR struct proc_file_s *)filep->f_priv; DEBUGASSERT(procfile); /* Verify that the thread is still valid */ flags = irqsave(); tcb = sched_gettcb(procfile->pid); if (!tcb) { fdbg("ERROR: PID %d is not valid\n", (int)procfile->pid); irqrestore(flags); return -ENODEV; } /* Provide the requested data */ switch (procfile->node->node) { case PROC_STATUS: /* Task/thread status */ ret = proc_status(procfile, tcb, buffer, buflen, filep->f_pos); break; case PROC_CMDLINE: /* Task command line */ ret = proc_cmdline(procfile, tcb, buffer, buflen, filep->f_pos); break; #ifdef CONFIG_SCHED_CPULOAD case PROC_LOADAVG: /* Average CPU utilization */ ret = proc_loadavg(procfile, tcb, buffer, buflen, filep->f_pos); break; #endif case PROC_STACK: /* Task stack info */ ret = proc_stack(procfile, tcb, buffer, buflen, filep->f_pos); break; case PROC_GROUP_STATUS: /* Task group status */ ret = proc_groupstatus(procfile, tcb, buffer, buflen, filep->f_pos); break; case PROC_GROUP_FD: /* Group file descriptors */ ret = proc_groupfd(procfile, tcb, buffer, buflen, filep->f_pos); break; default: ret = -EINVAL; break; } irqrestore(flags); /* Update the file offset */ if (ret > 0) { filep->f_pos += ret; } return ret; } /**************************************************************************** * Name: proc_dup * * Description: * Duplicate open file data in the new file structure. * ****************************************************************************/ static int proc_dup(FAR const struct file *oldp, FAR struct file *newp) { FAR struct proc_file_s *oldfile; FAR struct proc_file_s *newfile; fvdbg("Dup %p->%p\n", oldp, newp); /* Recover our private data from the old struct file instance */ oldfile = (FAR struct proc_file_s *)oldp->f_priv; DEBUGASSERT(oldfile); /* Allocate a new container to hold the task and node selection */ newfile = (FAR struct proc_file_s *)kmm_malloc(sizeof(struct proc_file_s)); if (!newfile) { fdbg("ERROR: Failed to allocate file container\n"); return -ENOMEM; } /* The copy the file information from the old container to the new */ memcpy(newfile, oldfile, sizeof(struct proc_file_s)); /* Save the new container in the new file structure */ newp->f_priv = (FAR void *)newfile; return OK; } /**************************************************************************** * Name: proc_opendir * * Description: * Open a directory for read access * ****************************************************************************/ static int proc_opendir(FAR const char *relpath, FAR struct fs_dirent_s *dir) { FAR struct proc_dir_s *procdir; FAR const struct proc_node_s *node; FAR struct tcb_s *tcb; irqstate_t flags; unsigned long tmp; FAR char *ptr; pid_t pid; fvdbg("relpath: \"%s\"\n", relpath ? relpath : "NULL"); DEBUGASSERT(relpath && dir && !dir->u.procfs); /* The relative must be either: * * (1) "" - The sub-directory of task/thread attributes, or * (2) The name of a directory node under */ /* Otherwise, the relative path should be a valid task/thread ID */ ptr = NULL; tmp = strtoul(relpath, &ptr, 10); if (!ptr || (*ptr != '\0' && *ptr != '/')) { /* strtoul failed or there is something in the path after the pid */ fdbg("ERROR: Invalid path \"%s\"\n", relpath); return -ENOENT; } /* A valid PID would be in the range of 0-32767 (0 is reserved for the * IDLE thread). */ if (tmp >= 32768) { fdbg("ERROR: Invalid PID %ld\n", tmp); return -ENOENT; } /* Now verify that a task with this task/thread ID exists */ pid = (pid_t)tmp; flags = irqsave(); tcb = sched_gettcb(pid); irqrestore(flags); if (!tcb) { fdbg("ERROR: PID %d is not valid\n", (int)pid); return -ENOENT; } /* Allocate the directory structure. Note that the index and procentry * pointer are implicitly nullified by kmm_zalloc(). Only the remaining, * non-zero entries will need be initialized. */ procdir = (FAR struct proc_dir_s *)kmm_zalloc(sizeof(struct proc_dir_s)); if (!procdir) { fdbg("ERROR: Failed to allocate the directory structure\n"); return -ENOMEM; } /* Was the the final element of the path? */ if (*ptr != '\0' && strcmp(ptr, "/") != 0) { /* There is something in the path after the pid. Skip over the path * segment delimiter and see if we can identify the node of interest. */ ptr++; node = proc_findnode(ptr); if (!node) { fdbg("ERROR: Invalid path \"%s\"\n", relpath); kmm_free(procdir); return -ENOENT; } /* The node must be a directory, not a file */ if (node->dtype != DTYPE_DIRECTORY) { fdbg("ERROR: Path \"%s\" is not a directory\n", relpath); kmm_free(procdir); return -ENOTDIR; } /* This is a second level directory */ procdir->base.level = 2; procdir->base.nentries = PROC_NGROUPNODES; procdir->node = node; } else { /* Use the special level0 node */ procdir->base.level = 1; procdir->base.nentries = PROC_NLEVEL0NODES; procdir->node = &g_level0node; } procdir->pid = pid; dir->u.procfs = (FAR void *)procdir; return OK; } /**************************************************************************** * Name: proc_closedir * * Description: Close the directory listing * ****************************************************************************/ static int proc_closedir(FAR struct fs_dirent_s *dir) { FAR struct proc_dir_s *priv; DEBUGASSERT(dir && dir->u.procfs); priv = dir->u.procfs; if (priv) { kmm_free(priv); } dir->u.procfs = NULL; return OK; } /**************************************************************************** * Name: proc_readdir * * Description: Read the next directory entry * ****************************************************************************/ static int proc_readdir(struct fs_dirent_s *dir) { FAR struct proc_dir_s *procdir; FAR const struct proc_node_s *node = NULL; FAR struct tcb_s *tcb; unsigned int index; irqstate_t flags; pid_t pid; int ret; DEBUGASSERT(dir && dir->u.procfs); procdir = dir->u.procfs; /* Have we reached the end of the directory */ index = procdir->base.index; if (index >= procdir->base.nentries) { /* We signal the end of the directory by returning the special * error -ENOENT */ fvdbg("Entry %d: End of directory\n", index); ret = -ENOENT; } /* No, we are not at the end of the directory */ else { /* Verify that the pid still refers to an active task/thread */ pid = procdir->pid; flags = irqsave(); tcb = sched_gettcb(pid); irqrestore(flags); if (!tcb) { fdbg("ERROR: PID %d is no longer valid\n", (int)pid); return -ENOENT; } /* The TCB is still valid (or at least was when we entered this function) */ /* Handle the directory listing by the node type */ switch (procdir->node->node) { case PROC_LEVEL0: /* Top level directory */ DEBUGASSERT(procdir->base.level == 1); node = g_level0info[index]; break; case PROC_GROUP: /* Group sub-directory */ DEBUGASSERT(procdir->base.level == 2); node = g_groupinfo[index]; break; default: return -ENOENT; } /* Save the filename and file type */ dir->fd_dir.d_type = node->dtype; strncpy(dir->fd_dir.d_name, node->name, NAME_MAX+1); /* Set up the next directory entry offset. NOTE that we could use the * standard f_pos instead of our own private index. */ procdir->base.index = index + 1; ret = OK; } return ret; } /**************************************************************************** * Name: proc_rewindir * * Description: Reset directory read to the first entry * ****************************************************************************/ static int proc_rewinddir(struct fs_dirent_s *dir) { FAR struct proc_dir_s *priv; DEBUGASSERT(dir && dir->u.procfs); priv = dir->u.procfs; priv->base.index = 0; return OK; } /**************************************************************************** * Name: proc_stat * * Description: Return information about a file or directory * ****************************************************************************/ static int proc_stat(const char *relpath, struct stat *buf) { FAR const struct proc_node_s *node; FAR struct tcb_s *tcb; unsigned long tmp; FAR char *ptr; irqstate_t flags; pid_t pid; /* Two path forms are accepted: * * "" - If refers to a currently active task/thread, then it * is a directory * "/" - If is a recognized node then, then it * is a file or directory. */ ptr = NULL; tmp = strtoul(relpath, &ptr, 10); if (!ptr) { fdbg("ERROR: Invalid path \"%s\"\n", relpath); return -ENOENT; } /* A valid PID would be in the range of 0-32767 (0 is reserved for the * IDLE thread). */ if (tmp >= 32768) { fdbg("ERROR: Invalid PID %ld\n", tmp); return -ENOENT; } /* Now verify that a task with this task/thread ID exists */ pid = (pid_t)tmp; flags = irqsave(); tcb = sched_gettcb(pid); irqrestore(flags); if (!tcb) { fdbg("ERROR: PID %d is no longer valid\n", (int)pid); return -ENOENT; } /* Was the the final element of the path? */ if (*ptr == '\0' || strcmp(ptr, "/") == 0) { /* Yes ... It's a read-only directory */ buf->st_mode = S_IFDIR | S_IROTH | S_IRGRP | S_IRUSR; } /* Verify that the process ID is followed by valid path segment delimiter */ else if (*ptr != '/') { /* We are required to return -ENOENT all all invalid paths */ fdbg("ERROR: Bad delimiter '%c' in relpath '%s'\n", *ptr, relpath); return -ENOENT; } else { /* Otherwise, the second segment of the relpath should be a well * known node of the task/thread directory structure. */ /* Skip over the path segment delimiter */ ptr++; /* Lookup the well-known node associated with the relative path. */ node = proc_findnode(ptr); if (!node) { fdbg("ERROR: Invalid path \"%s\"\n", relpath); return -ENOENT; } /* If the node exists, it is the name for a read-only file or * directory. */ if (node->dtype == DTYPE_FILE) { buf->st_mode = S_IFREG | S_IROTH | S_IRGRP | S_IRUSR; } else { buf->st_mode = S_IFDIR | S_IROTH | S_IRGRP | S_IRUSR; } } /* File/directory size, access block size */ buf->st_size = 0; buf->st_blksize = 0; buf->st_blocks = 0; return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ #endif /* CONFIG_FS_PROC_EXCLUDE_PROCESS */ #endif /* !CONFIG_DISABLE_MOUNTPOINT && CONFIG_FS_PROCFS */