/**************************************************************************** * drivers/wireless/bcm43xxx/ieee80211/bcmf_core.c * * Copyright (C) 2017-2018 Gregory Nutt. All rights reserved. * Author: Simon Piriou * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "bcmf_core.h" #include "bcmf_sdio.h" #include "bcmf_sdio_regs.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Agent registers (common for every core) */ #define BCMA_IOCTL 0x0408 /* IO control */ #define BCMA_IOST 0x0500 /* IO status */ #define BCMA_RESET_CTL 0x0800 /* Reset control */ #define BCMA_RESET_ST 0x0804 #define BCMA_IOCTL_CLK 0x0001 #define BCMA_IOCTL_FGC 0x0002 #define BCMA_IOCTL_CORE_BITS 0x3FFC #define BCMA_IOCTL_PME_EN 0x4000 #define BCMA_IOCTL_BIST_EN 0x8000 #define BCMA_IOST_CORE_BITS 0x0FFF #define BCMA_IOST_DMA64 0x1000 #define BCMA_IOST_GATED_CLK 0x2000 #define BCMA_IOST_BIST_ERROR 0x4000 #define BCMA_IOST_BIST_DONE 0x8000 #define BCMA_RESET_CTL_RESET 0x0001 /* SOCSRAM core registers */ #define SOCSRAM_BANKX_INDEX ((uint32_t) (0x18004000 + 0x10) ) #define SOCSRAM_BANKX_PDA ((uint32_t) (0x18004000 + 0x44) ) /* Transfer size properties */ #define BCMF_UPLOAD_TRANSFER_SIZE (64 * 256) /* Define this to validate uploaded materials */ /* #define DBG_VALIDATE_UPLOAD */ /**************************************************************************** * Private Types ****************************************************************************/ #ifdef DBG_VALIDATE_UPLOAD static uint8_t compare_buffer[BCMF_UPLOAD_TRANSFER_SIZE]; #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int bcmf_core_set_backplane_window(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address); static int bcmf_upload_binary(FAR struct bcmf_sdio_dev_s *sbusv, uint32_t address, uint8_t *buf, unsigned int len); static int bcmf_upload_nvram(FAR struct bcmf_sdio_dev_s *sbus); /**************************************************************************** * Private Functions ****************************************************************************/ int bcmf_core_set_backplane_window(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address) { int ret; int i; address &= ~SBSDIO_SB_OFT_ADDR_MASK; for (i = 1; i < 4; i++) { uint8_t addr_part = (address >> (8*i)) & 0xff; uint8_t cur_addr_part = (sbus->backplane_current_addr >> (8*i)) & 0xff; if (addr_part != cur_addr_part) { /* Update current backplane base address */ ret = bcmf_write_reg(sbus, 1, SBSDIO_FUNC1_SBADDRLOW + i - 1, addr_part); if (ret != OK) { return ret; } sbus->backplane_current_addr &= ~(0xff << (8*i)); sbus->backplane_current_addr |= addr_part << (8*i); } } return OK; } int bcmf_upload_binary(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address, uint8_t *buf, unsigned int len) { unsigned int size; #ifdef DBG_VALIDATE_UPLOAD uint32_t validate_address = address; uint8_t *validate_buffer = buf; unsigned int validate_len = len; #endif while (len > 0) { /* Set the backplane window to include the start address */ int ret = bcmf_core_set_backplane_window(sbus, address); if (ret != OK) { wlerr("Backplane setting failed at %08x\n", address); return ret; } if (len > BCMF_UPLOAD_TRANSFER_SIZE) { size = BCMF_UPLOAD_TRANSFER_SIZE; } else { size = len; } /* Transfer firmware data */ ret = bcmf_transfer_bytes(sbus, true, 1, address & SBSDIO_SB_OFT_ADDR_MASK, buf, size); if (ret != OK) { wlerr("transfer failed %d %x %d\n", ret, address, size); return ret; } len -= size; address += size; buf += size; } #ifdef DBG_VALIDATE_UPLOAD wlwarn("Validating....\n"); while (validate_len > 0) { /* Set the backplane window to include the start address */ int ret = bcmf_core_set_backplane_window(sbus, validate_address); if (ret != OK) { wlerr("Backplane setting failed at %08x\n", validate_address); return ret; } if (validate_len > BCMF_UPLOAD_TRANSFER_SIZE) { size = BCMF_UPLOAD_TRANSFER_SIZE; } else { size = validate_len; } /* Transfer firmware data */ ret = bcmf_transfer_bytes(sbus, false, 1, validate_address & SBSDIO_SB_OFT_ADDR_MASK, compare_buffer, size); if (ret != OK) { wlerr("validate transfer failed %d %x %d\n", ret, validate_address, size); return ret; } if (memcmp(validate_buffer, compare_buffer, size)) { wlerr("Match failed at address base %08x\n", validate_address); return -EILSEQ; } validate_len -= size; validate_address += size; validate_buffer += size; } wlwarn("Validation passed\n"); #endif return OK; } #ifdef CONFIG_IEEE80211_BROADCOM_FWFILES int bcmf_upload_file(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address, FAR const char *path) { struct file finfo; FAR uint8_t *buf; size_t total_read; ssize_t nread; int ret; /* Open the file in the detached state */ ret = file_open(&finfo, path, O_RDONLY | O_BINARY); if (ret < 0) { wlerr("ERROR: Failed to open the FILE MTD file %s: %d\n", path, ret); return ret; } /* Allocate an I/O buffer */ buf = (FAR uint8_t *)kmm_malloc(BCMF_UPLOAD_TRANSFER_SIZE); if (buf == NULL) { wlerr("ERROR: Failed allocate an I/O buffer\n"); ret = -ENOMEM; goto errout_with_file; } /* Loop until the firmware has been loaded */ do { /* Set the backplane window to include the start address */ nread = file_read(&finfo, buf, BCMF_UPLOAD_TRANSFER_SIZE); if (nread < 0) { ret = (int)nread; wlerr("ERROR: Failed to read file: %d\n", ret); goto errout_with_buf; } if (nread == 0) { break; } wlinfo("Read %ld bytes\n", (long)nread); ret = bcmf_core_set_backplane_window(sbus, address); if (ret < 0) { wlerr("ERROR: bcmf_core_set_backplane_window() failed: %d\n", ret); goto errout_with_buf; } total_read = nread; /* Transfer firmware data */ ret = bcmf_transfer_bytes(sbus, true, 1, address & SBSDIO_SB_OFT_ADDR_MASK, buf, total_read); if (ret < 0) { wlerr("ERROR: Transfer failed address=%lx total_read=%lu: %d\n", (unsigned long)address, (unsigned long)total_read, ret); goto errout_with_buf; } address += total_read; } while (nread == BCMF_UPLOAD_TRANSFER_SIZE); file_close(&finfo); kmm_free(buf); wlinfo("Upload complete\n"); return OK; errout_with_buf: kmm_free(buf); errout_with_file: file_close(&finfo); return ret; } #endif int bcmf_upload_nvram(FAR struct bcmf_sdio_dev_s *sbus) { int ret; uint32_t nvram_sz; uint32_t token; /* Round up the size of the image */ nvram_sz = (*sbus->chip->nvram_image_size + 63) & (-64); wlinfo("nvram size is %d %d bytes\n", nvram_sz, *sbus->chip->nvram_image_size); /* Write image */ ret = bcmf_upload_binary(sbus, sbus->chip->ram_size - 4 - nvram_sz, sbus->chip->nvram_image, *sbus->chip->nvram_image_size); if (ret != OK) { return ret; } /* Generate length token */ token = nvram_sz / 4; token = (~token << 16) | (token & 0x0000ffff); /* Write the length token to the last word */ ret = bcmf_write_sbreg(sbus, sbus->chip->ram_size - 4, (FAR uint8_t *)&token, 4); if (ret != OK) { return ret; } return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: bcmf_read_sbreg ****************************************************************************/ int bcmf_read_sbreg(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address, FAR uint8_t *reg, unsigned int len) { int ret = bcmf_core_set_backplane_window(sbus, address); if (ret != OK) { return ret; } address &= SBSDIO_SB_OFT_ADDR_MASK; /* Map to 32-bit access if len == 4 */ if (len == 4) { address |= SBSDIO_SB_ACCESS_2_4B_FLAG; } return bcmf_transfer_bytes(sbus, false, 1, address, reg, len); } /**************************************************************************** * Name: bcmf_write_sbreg ****************************************************************************/ int bcmf_write_sbreg(FAR struct bcmf_sdio_dev_s *sbus, uint32_t address, FAR uint8_t *reg, unsigned int len) { int ret = bcmf_core_set_backplane_window(sbus, address); if (ret != OK) { return ret; } address &= SBSDIO_SB_OFT_ADDR_MASK; /* Map to 32-bit access if len == 4 */ if (len == 4) { address |= SBSDIO_SB_ACCESS_2_4B_FLAG; } return bcmf_transfer_bytes(sbus, true, 1, address, reg, len); } /**************************************************************************** * Name: bcmf_core_upload_firmware ****************************************************************************/ int bcmf_core_upload_firmware(FAR struct bcmf_sdio_dev_s *sbus) { int ret; wlinfo("upload firmware\n"); /* Disable ARMCM3 core and reset SOCRAM core to set device in firmware * upload mode */ bcmf_core_disable(sbus, WLAN_ARMCM3_CORE_ID); bcmf_core_reset(sbus, SOCSRAM_CORE_ID); /* Do chip specific initialization */ if (sbus->cur_chip_id == SDIO_DEVICE_ID_BROADCOM_43430) { /* Disable remap for SRAM_3. Only for 4343x */ bcmf_write_sbregw(sbus, SOCSRAM_BANKX_INDEX, 0x3); bcmf_write_sbregw(sbus, SOCSRAM_BANKX_PDA, 0); } up_mdelay(50); /* Flash chip firmware */ #ifdef CONFIG_IEEE80211_BROADCOM_FWFILES ret = bcmf_upload_file(sbus, 0, CONFIG_IEEE80211_BROADCOM_FWFILENAME); #else wlinfo("firmware size is %d bytes\n", *sbus->chip->firmware_image_size); ret = bcmf_upload_binary(sbus, 0, sbus->chip->firmware_image, *sbus->chip->firmware_image_size); #endif if (ret < 0) { wlerr("ERROR: Failed to upload firmware\n"); return ret; } /* Flash NVRAM configuration file */ wlinfo("upload nvram configuration\n"); ret = bcmf_upload_nvram(sbus); if (ret < 0) { wlerr("ERROR: Failed to upload NVRAM\n"); return ret; } /* Firmware upload done, restart ARMCM3 core */ up_mdelay(10); bcmf_core_reset(sbus, WLAN_ARMCM3_CORE_ID); /* Check ARMCM3 core is running */ up_mdelay(10); if (!bcmf_core_isup(sbus, WLAN_ARMCM3_CORE_ID)) { wlerr("Cannot start ARMCM3 core\n"); return -ETIMEDOUT; } return OK; } bool bcmf_core_isup(FAR struct bcmf_sdio_dev_s *sbus, unsigned int core) { uint32_t value = 0; uint32_t base; if (core >= MAX_CORE_ID) { wlerr("Invalid core id %d\n", core); return false; } base = sbus->chip->core_base[core]; bcmf_read_sbregw(sbus, base + BCMA_IOCTL, &value); if ((value & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) != BCMA_IOCTL_CLK) { return false; } bcmf_read_sbregw(sbus, base + BCMA_RESET_CTL, &value); return (value & BCMA_RESET_CTL_RESET) == 0; } void bcmf_core_disable(FAR struct bcmf_sdio_dev_s *sbus, unsigned int core) { uint8_t value; if (core >= MAX_CORE_ID) { wlerr("Invalid core id %d\n", core); return; } uint32_t base = sbus->chip->core_base[core]; /* Check if core is already in reset state */ bcmf_read_sbregb(sbus, base + BCMA_RESET_CTL, &value); if ((value & BCMA_RESET_CTL_RESET) != 0) { /* Core already disabled */ return; } /* Ensure no backplane operation is pending */ up_mdelay(10); /* Set core in reset state */ bcmf_write_sbregb(sbus, base + BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); up_udelay(1); /* Write 0 to the IO control and read it back */ bcmf_write_sbregb(sbus, base + BCMA_IOCTL, 0); bcmf_read_sbregb(sbus, base + BCMA_IOCTL, &value); up_udelay(10); } void bcmf_core_reset(FAR struct bcmf_sdio_dev_s *sbus, unsigned int core) { uint32_t value; uint32_t base; if (core >= MAX_CORE_ID) { wlerr("Invalid core id %d\n", core); return; } base = sbus->chip->core_base[core]; /* Put core in reset state */ bcmf_core_disable(sbus, core); /* Run initialization sequence */ bcmf_write_sbregb(sbus, base + BCMA_IOCTL, BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); bcmf_read_sbregw(sbus, base + BCMA_IOCTL, &value); bcmf_write_sbregb(sbus, base + BCMA_RESET_CTL, 0); bcmf_read_sbregw(sbus, base + BCMA_RESET_CTL, &value); up_udelay(1); bcmf_write_sbregb(sbus, base + BCMA_IOCTL, BCMA_IOCTL_CLK); bcmf_read_sbregw(sbus, base + BCMA_IOCTL, &value); up_udelay(1); }