/**************************************************************************** * drivers/usbdev/usbdev_storage.h * * Copyright (C) 2008 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Mass storage class device. Bulk-only with SCSI subclass. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __DRIVERS_USBDEV_USBDEV_STORAGE_H #define __DRIVERS_USBDEV_USBDEV_STORAGE_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include /**************************************************************************** * Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* Number of requests in the write queue */ #ifndef CONFIG_USBSTRG_NWRREQS # define CONFIG_USBSTRG_NWRREQS 4 #endif /* Number of requests in the read queue */ #ifndef CONFIG_USBSTRG_NRDREQS # define CONFIG_USBSTRG_NRDREQS 4 #endif /* Logical endpoint numbers / max packet sizes */ #ifndef CONFIG_USBSTRG_EPBULKOUT # warning "EPBULKOUT not defined in the configuration" # define CONFIG_USBSTRG_EPBULKOUT 2 #endif #ifndef CONFIG_USBSTRG_EPBULKIN # warning "EPBULKIN not defined in the configuration" # define CONFIG_USBSTRG_EPBULKIN 3 #endif /* Packet and request buffer sizes */ #ifndef CONFIG_USBSTRG_EP0MAXPACKET # define CONFIG_USBSTRG_EP0MAXPACKET 64 #endif #ifndef CONFIG_USBSTRG_BULKINREQLEN # ifdef CONFIG_USBDEV_DUALSPEED # define CONFIG_USBSTRG_BULKINREQLEN 512 # else # define CONFIG_USBSTRG_BULKINREQLEN 64 # endif #else # ifdef CONFIG_USBDEV_DUALSPEED # if CONFIG_USBSTRG_BULKINREQLEN < 512 # warning "Bulk in buffer size smaller than max packet" # undef CONFIG_USBSTRG_BULKINREQLEN # define CONFIG_USBSTRG_BULKINREQLEN 512 # endif # else # if CONFIG_USBSTRG_BULKINREQLEN < 64 # warning "Bulk in buffer size smaller than max packet" # undef CONFIG_USBSTRG_BULKINREQLEN # define CONFIG_USBSTRG_BULKINREQLEN 64 # endif # endif #endif #ifndef CONFIG_USBSTRG_BULKOUTREQLEN # ifdef CONFIG_USBDEV_DUALSPEED # define CONFIG_USBSTRG_BULKOUTREQLEN 512 # else # define CONFIG_USBSTRG_BULKOUTREQLEN 64 # endif #else # ifdef CONFIG_USBDEV_DUALSPEED # if CONFIG_USBSTRG_BULKOUTREQLEN < 512 # warning "Bulk in buffer size smaller than max packet" # undef CONFIG_USBSTRG_BULKOUTREQLEN # define CONFIG_USBSTRG_BULKOUTREQLEN 512 # endif # else # if CONFIG_USBSTRG_BULKOUTREQLEN < 64 # warning "Bulk in buffer size smaller than max packet" # undef CONFIG_USBSTRG_BULKOUTREQLEN # define CONFIG_USBSTRG_BULKOUTREQLEN 64 # endif # endif #endif /* Vendor and product IDs and strings */ #ifndef CONFIG_USBSTRG_VENDORID # warning "CONFIG_USBSTRG_VENDORID not defined" # define CONFIG_USBSTRG_VENDORID 0x584e #endif #ifndef CONFIG_USBSTRG_PRODUCTID # warning "CONFIG_USBSTRG_PRODUCTID not defined" # define CONFIG_USBSTRG_PRODUCTID 0x5342 #endif #ifndef CONFIG_USBSTRG_VERSIONNO # define CONFIG_USBSTRG_VERSIONNO (0x0399) #endif #ifndef CONFIG_USBSTRG_VENDORSTR # warning "No Vendor string specified" # define CONFIG_USBSTRG_VENDORSTR "NuttX" #endif #ifndef CONFIG_USBSTRG_PRODUCTSTR # warning "No Product string specified" # define CONFIG_USBSTRG_PRODUCTSTR "USBdev Storage" #endif #undef CONFIG_USBSTRG_SERIALSTR #define CONFIG_USBSTRG_SERIALSTR "0101" #undef CONFIG_USBSTRG_CONFIGSTR #define CONFIG_USBSTRG_CONFIGSTR "Bulk" /* Debug -- must be consistent with include/debug.h */ #ifdef CONFIG_CPP_HAVE_VARARGS # ifdef CONFIG_DEBUG # ifdef CONFIG_ARCH_LOWPUTC # define dbgprintf(format, arg...) lib_lowprintf(format, ##arg) # else # define dbgprintf(format, arg...) lib_rawprintf(format, ##arg) # endif # else # define dbgprintf(x...) # endif #else # ifdef CONFIG_DEBUG # ifdef CONFIG_ARCH_LOWPUTC # define dbgprintf lib_lowprintf # else # define dbgprintf lib_rawprintf # endif # else # define dbgprintf (void) # endif #endif /* Packet and request buffer sizes */ #ifndef CONFIG_USBSTRG_EP0MAXPACKET # define CONFIG_USBSTRG_EP0MAXPACKET 64 #endif /* USB Controller */ #ifndef CONFIG_USBDEV_SELFPOWERED # define SELFPOWERED USB_CONFIG_ATT_SELFPOWER #else # define SELFPOWERED (0) #endif #ifndef CONFIG_USBDEV_REMOTEWAKEUP # define REMOTEWAKEUP USB_CONFIG_ATTR_WAKEUP #else # define REMOTEWAKEUP (0) #endif #ifndef CONFIG_USBDEV_MAXPOWER # define CONFIG_USBDEV_MAXPOWER 100 #endif /* Current state of the worker thread */ #define USBSTRG_STATE_NOTSTARTED (0) /* Thread has not yet been started */ #define USBSTRG_STATE_STARTED (1) /* Started, but is not yet initialized */ #define USBSTRG_STATE_IDLE (2) /* Started and waiting for commands */ #define USBSTRG_STATE_CMDPARSE (3) /* Processing a received command */ #define USBSTRG_STATE_CMDREAD (4) /* Processing a SCSI read command */ #define USBSTRG_STATE_CMDWRITE (5) /* Processing a SCSI write command */ #define USBSTRG_STATE_CMDFINISH (6) /* Finish command processing */ #define USBSTRG_STATE_CMDSTATUS (7) /* Processing the final status of the command */ #define USBSTRG_STATE_TERMINATED (8) /* Thread has exitted */ /* Event communicated to worker thread */ #define USBSTRG_EVENT_NOEVENTS (0) /* There are no outstanding events */ #define USBSTRG_EVENT_READY (1 << 0) /* Initialization is complete */ #define USBSTRG_EVENT_RDCOMPLETE (1 << 1) /* A read has completed there is data to be processed */ #define USBSTRG_EVENT_WRCOMPLETE (1 << 2) /* A write has completed and a request is available */ #define USBSTRG_EVENT_TERMINATEREQUEST (1 << 3) /* Shutdown requested */ #define USBSTRG_EVENT_DISCONNECT (1 << 4) /* USB disconnect received */ #define USBSTRG_EVENT_RESET (1 << 5) /* USB storage setup reset received */ #define USBSTRG_EVENT_CFGCHANGE (1 << 6) /* USB setup configuration change received */ #define USBSTRG_EVENT_IFCHANGE (1 << 7) /* USB setup interface change received */ #define USBSTRG_EVENT_ABORTBULKOUT (1 << 8) /* SCSI receive failure */ /* SCSI command flags (passed to usbstrg_setupcmd()) */ #define USBSTRG_FLAGS_DIRMASK (0x03) /* Bits 0-1: Data direction */ #define USBSTRG_FLAGS_DIRNONE (0x00) /* No data to send */ #define USBSTRG_FLAGS_DIRHOST2DEVICE (0x01) /* Host-to-device */ #define USBSTRG_FLAGS_DIRDEVICE2HOST (0x02) /* Device-to-host */ #define USBSTRG_FLAGS_BLOCKXFR (0x04) /* Bit 2: Command is a block transfer request */ #define USBSTRG_FLAGS_LUNNOTNEEDED (0x08) /* Bit 3: Command does not require a valid LUN */ #define USBSTRG_FLAGS_UACOKAY (0x10) /* Bit 4: Command OK if unit attention condition */ #define USBSTRG_FLAGS_RETAINSENSEDATA (0x20) /* Bit 5: Do not clear sense data */ /* Descriptors **************************************************************/ /* Big enough to hold our biggest descriptor */ #define USBSTRG_MXDESCLEN (64) /* String language */ #define USBSTRG_STR_LANGUAGE (0x0409) /* en-us */ /* Descriptor strings */ #define USBSTRG_MANUFACTURERSTRID (1) #define USBSTRG_PRODUCTSTRID (2) #define USBSTRG_SERIALSTRID (3) #define USBSTRG_CONFIGSTRID (4) #define USBSTRG_NCONFIGS (1) /* Number of configurations supported */ /* Configuration Descriptor */ #define USBSTRG_NINTERFACES (1) /* Number of interfaces in the configuration */ #define USBSTRG_INTERFACEID (0) #define USBSTRG_ALTINTERFACEID (0) #define USBSTRG_CONFIGIDNONE (0) /* Config ID means to return to address mode */ #define USBSTRG_CONFIGID (1) /* The only supported configuration ID */ #define STRING_MANUFACTURER (1) #define STRING_PRODUCT (2) #define STRING_SERIAL (3) #define USBSTRG_CONFIGID (1) /* There is only one configuration. */ /* Interface description */ #define USBSTRG_NENDPOINTS (2) /* Number of endpoints in the interface */ /* Endpoint configuration */ #define USBSTRG_EPOUTBULK_ADDR (CONFIG_USBSTRG_EPBULKOUT) #define USBSTRG_EPOUTBULK_ATTR (USB_EP_ATTR_XFER_BULK) #define USBSTRG_EPINBULK_ADDR (USB_DIR_IN|CONFIG_USBSTRG_EPBULKIN) #define USBSTRG_EPINBULK_ATTR (USB_EP_ATTR_XFER_BULK) #define USBSTRG_HSBULKMAXPACKET (512) #define USBSTRG_HSBULKMXPKTSHIFT (9) #define USBSTRG_HSBULKMXPKTMASK (0x000001ff) #define USBSTRG_FSBULKMAXPACKET (64) #define USBSTRG_FSBULKMXPKTSHIFT (6) #define USBSTRG_FSBULKMXPKTMASK (0x0000003f) /* Macros for dual speed vs. full speed only operation */ #ifdef CONFIG_USBDEV_DUALSPEED # define USBSTRG_EPBULKINDESC(hs) ((hs) ? (g_hsepbulkindesc) : (g_fsepbulkindesc)) # define USBSTRG_EPBULKOUTDESC(hs) ((hs) ? (g_hsepbulkoutdesc) : (g_fsepbulkoutdesc)) # define USBSTRG_BULKMAXPACKET(hs) \ ((hs) ? USBSTRG_HSBULKMAXPACKET : USBSTRG_FSBULKMAXPACKET) # define USBSTRG_BULKMXPKTSHIFT(d) \ (((d)->speed==USB_SPEED_HIGH) ? USBSTRG_HSBULKMXPKTSHIFT : USBSTRG_FSBULKMXPKTSHIFT) # define USBSTRG_BULKMXPKTMASK(d) \ (((d)->speed==USB_SPEED_HIGH) ? USBSTRG_HSBULKMXPKTMASK : USBSTRG_FSBULKMXPKTMASK) #else # define USBSTRG_EPBULKINDESC(d) (g_fsepbulkindesc)) # define USBSTRG_EPBULKOUTDESC(d) (g_fsepbulkoutdesc)) # define USBSTRG_BULKMAXPACKET(hs) USBSTRG_FSBULKMAXPACKET # define USBSTRG_BULKMXPKTSHIFT(d) USBSTRG_FSBULKMXPKTSHIFT # define USBSTRG_BULKMXPKTMASK(d) USBSTRG_FSBULKMXPKTMASK #endif /* Block driver helpers *****************************************************/ #define USBSTRG_DRVR_READ(l,b,s,n) ((l)->inode->u.i_bops->read((l)->inode,b,s,n)) #define USBSTRG_DRVR_WRITE(l,b,s,n) ((l)->inode->u.i_bops->write((l)->inode,b,s,n)) #define USBSTRG_DRVR_GEOMETRY(l,g) ((l)->inode->u.i_bops->geometry((l)->inode,g)) /* Everpresent min/max macros ***********************************************/ #ifndef min # define min(a,b) ((a) < (b) ? (a) : (b)) #endif #ifndef max # define max(a,b) ((a) > (b) ? (a) : (b)) #endif /**************************************************************************** * Public Types ****************************************************************************/ /* Container to support a list of requests */ struct usbstrg_req_s { FAR struct usbstrg_req_s *flink; /* Implements a singly linked list */ FAR struct usbdev_req_s *req; /* The contained request */ }; /* This structure describes one LUN: */ struct usbstrg_lun_s { struct inode *inode; /* Inode structure of open'ed block driver */ ubyte readonly:1; /* Media is read-only */ ubyte locked:1; /* Media removal is prevented */ uint16 sectorsize; /* The size of one sector */ uint32 sd; /* Sense data */ uint32 sdinfo; /* Sense data information */ uint32 uad; /* Unit needs attention data */ off_t startsector; /* Sector offset to start of partition */ size_t nsectors; /* Number of sectors in the partition */ }; /* Describes the overall state of the driver */ struct usbstrg_dev_s { FAR struct usbdev_s *usbdev; /* usbdev driver pointer (Non-null if registered) */ /* Worker thread interface */ pthread_t thread; /* The worker thread */ pthread_mutex_t mutex; /* Mutually exclusive access to resources*/ pthread_cond_t cond; /* Used to signal worker thread */ volatile ubyte thstate; /* State of the worker thread */ volatile uint16 theventset; /* Set of pending events signaled to worker thread */ volatile ubyte thvalue; /* Value passed with the event (must persist) */ /* Storage class configuration and state */ ubyte nluns:4; /* Number of LUNs */ ubyte config; /* Configuration number */ /* Endpoints */ FAR struct usbdev_ep_s *epbulkin; /* Bulk IN endpoint structure */ FAR struct usbdev_ep_s *epbulkout; /* Bulk OUT endpoint structure */ FAR struct usbdev_req_s *ctrlreq; /* Control request (for ep0 setup responses) */ /* SCSI command processing */ struct usbstrg_lun_s *lun; /* Currently selected LUN */ struct usbstrg_lun_s *luntab; /* Allocated table of all LUNs */ ubyte cdb[USBSTRG_MAXCDBLEN]; /* Command data (cdb[]) from CBW */ ubyte phaseerror:1; /* Need to send phase sensing status */ ubyte shortpacket:1; /* Host transmission stopped unexpectedly */ ubyte cbwdir:2; /* Direction from CBW. See USBSTRG_FLAGS_DIR* definitions */ ubyte cdblen; /* Length of cdb[] from CBW */ ubyte cbwlun; /* LUN from the CBW */ uint16 nsectbytes; /* Bytes buffered in iobuffer[] */ uint16 nreqbytes; /* Bytes buffered in head write requests */ uint16 iosize; /* Size of iobuffer[] */ uint32 cbwlen; /* Length of data from CBW */ uint32 cbwtag; /* Tag from the CBW */ union { uint32 xfrlen; /* Read/Write: Sectors remaining to be transferred */ uint32 alloclen; /* Other device-to-host: Host allocation length */ } u; uint32 sector; /* Current sector (relative to lun->startsector) */ uint32 residue; /* Untransferred amount reported in the CSW */ ubyte *iobuffer; /* Buffer for data transfers */ /* Write request list */ struct sq_queue_s wrreqlist; /* List of empty write request containers */ struct sq_queue_s rdreqlist; /* List of filled read request containers */ /* Pre-allocated write request containers. The write requests will * be linked in a free list (wrreqlist), and used to send requests to * EPBULKIN; Read requests will be queued in the EBULKOUT. */ struct usbstrg_req_s wrreqs[CONFIG_USBSTRG_NWRREQS]; struct usbstrg_req_s rdreqs[CONFIG_USBSTRG_NRDREQS]; }; /**************************************************************************** * Public Data ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) # define EXTERN extern "C" extern "C" { #else # define EXTERN extern #endif /* String *******************************************************************/ EXTERN const char g_vendorstr[]; EXTERN const char g_productstr[]; EXTERN const char g_serialstr[]; /************************************************************************************ * Public Function Prototypes ************************************************************************************/ /**************************************************************************** * Name: usbstrg_workerthread * * Description: * This is the main function of the USB storage worker thread. It loops * until USB-related events occur, then processes those events accordingly * ****************************************************************************/ EXTERN void *usbstrg_workerthread(void *arg); /**************************************************************************** * Name: usbstrg_setconfig * * Description: * Set the device configuration by allocating and configuring endpoints and * by allocating and queue read and write requests. * ****************************************************************************/ EXTERN int usbstrg_setconfig(FAR struct usbstrg_dev_s *priv, ubyte config); /**************************************************************************** * Name: usbstrg_resetconfig * * Description: * Mark the device as not configured and disable all endpoints. * ****************************************************************************/ EXTERN void usbstrg_resetconfig(FAR struct usbstrg_dev_s *priv); /**************************************************************************** * Name: usbstrg_wrcomplete * * Description: * Handle completion of write request. This function probably executes * in the context of an interrupt handler. * ****************************************************************************/ EXTERN void usbstrg_wrcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); /**************************************************************************** * Name: usbstrg_rdcomplete * * Description: * Handle completion of read request on the bulk OUT endpoint. This * is handled like the receipt of serial data on the "UART" * ****************************************************************************/ EXTERN void usbstrg_rdcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); /**************************************************************************** * Name: usbstrg_deferredresponse * * Description: * Some EP0 setup request cannot be responded to immediately becuase they * require some asynchronous action from the SCSI worker thread. This * function is provided for the SCSI thread to make that deferred response. * The specific requests that require this deferred response are: * * 1. USB_REQ_SETCONFIGURATION, * 2. USB_REQ_SETINTERFACE, or * 3. USBSTRG_REQ_MSRESET * * In all cases, the success reponse is a zero-length packet; the failure * response is an EP0 stall. * * Input parameters: * priv - Private state structure for this USB storage instance * stall - TRUE is the action failed and a stall is required * ****************************************************************************/ EXTERN void usbstrg_deferredresponse(FAR struct usbstrg_dev_s *priv, boolean failed); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* #define __DRIVERS_USBDEV_USBDEV_STORAGE_H */