############################################################################ # configs/compal_e99/nsh_compalram/defconfig # # Copyright (C) 2007-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # # Architecture Selection # CONFIG_ARCH="arm" CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM7TDMI=y CONFIG_ARCH_CHIP="calypso" CONFIG_ARCH_CHIP_CALYPSO=y CONFIG_ARCH_BOARD="compal_e99" CONFIG_ARCH_BOARD_COMPALE99=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_MM_REGIONS=2 CONFIG_HEAP2_BASE=0x01000000 CONFIG_HEAP2_SIZE=2097152 CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y CONFIG_DRAM_START=0 CONFIG_DRAM_SIZE=8650752 # # C5471 specific device driver settings # CONFIG_SERCOMM_CONSOLE=n CONFIG_SERIAL_IRDA_CONSOLE=n CONFIG_UART_IRDA_HWFLOWCONTROL=n CONFIG_UART_MODEM_HWFLOWCONTROL=n CONFIG_UART_IRDA_RXBUFSIZE=256 CONFIG_UART_MODEM_RXBUFSIZE=256 CONFIG_UART_IRDA_TXBUFSIZE=256 CONFIG_UART_MODEM_TXBUFSIZE=256 CONFIG_UART_IRDA_BAUD=115200 CONFIG_UART_MODEM_BAUD=115200 CONFIG_UART_IRDA_BITS=8 CONFIG_UART_MODEM_BITS=8 CONFIG_UART_IRDA_PARITY=0 CONFIG_UART_MODEM_PARITY=0 CONFIG_UART_IRDA_2STOP=0 CONFIG_UART_MODEM_2STOP=0 CONFIG_STDIO_LINE_BUFFER=y # # C5471 Ethernet Driver settings CONFIG_C5471_NET_STATS=n ETHERNET_PHY_LU3X31T_T64=1 ETHERNET_PHY_AC101L=2 CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64 CONFIG_NET_C5471_AUTONEGOTIATION=y CONFIG_NET_C5471_BASET100=n CONFIG_NET_C5471_BASET10=n # # General build options # CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_RAW_BINARY=y CONFIG_HAVE_LIBM=n # # General OS setup # CONFIG_USER_ENTRYPOINT="nsh_main" CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=200 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=0 CONFIG_START_YEAR=2007 CONFIG_START_MONTH=2 CONFIG_START_DAY=13 CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=n CONFIG_SEM_PREALLOCHOLDERS=0 CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y CONFIG_NXFLAT=n # # The following can be used to disable categories of # APIs supported by the OS. If the compiler supports # weak functions, then it should not be necessary to # disable functions unless you want to restrict usage # of those APIs. # # There are certain dependency relationships in these # features. # # o mq_notify logic depends on signals to awaken tasks # waiting for queues to become full or empty. # o pthread_condtimedwait() depends on signals to wake # up waiting tasks. # CONFIG_DISABLE_CLOCK=n CONFIG_DISABLE_POSIX_TIMERS=n CONFIG_DISABLE_PTHREAD=n CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=y CONFIG_DISABLE_MOUNTPOINT=n CONFIG_DISABLE_ENVIRON=n CONFIG_DISABLE_POLL=y # # FAT filesystem configuration # CONFIG_FS_FAT=n CONFIG_FS_ROMFS=n # # Misc libc settings # CONFIG_NOPRINTF_FIELDWIDTH=n # # Allow for architecture optimized implementations # # The architecture can provide optimized versions of the # following to improve sysem performance # CONFIG_ARCH_MEMCPY=n CONFIG_ARCH_MEMCMP=n CONFIG_ARCH_MEMMOVE=n CONFIG_ARCH_MEMSET=n CONFIG_ARCH_STRCMP=n CONFIG_ARCH_STRCPY=n CONFIG_ARCH_STRNCPY=n CONFIG_ARCH_STRLEN=n CONFIG_ARCH_STRNLEN=n CONFIG_ARCH_BZERO=n # # Sizes of configurable things (0 disables) # CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=1024 CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=0 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=4 CONFIG_PREALLOC_WDOGS=8 CONFIG_PREALLOC_TIMERS=8 # SPI driver # CONFIG_SPI_OWNBUS=y CONFIG_SPI_EXCHANGE=y # # TCP/IP and UDP support via uIP # CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=8 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=420 CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=8 CONFIG_NET_NTCP_READAHEAD_BUFFERS=32 CONFIG_NET_TCPBACKLOG=n CONFIG_NET_MAX_LISTENPORTS=8 CONFIG_NET_UDP=y CONFIG_NET_UDP_CHECKSUMS=y #CONFIG_NET_UDP_CONNS=4 CONFIG_NET_ICMP=y CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 CONFIG_NET_STATISTICS=y #CONFIG_NET_RECEIVE_WINDOW= #CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n # # UIP Network Utilities # CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # Settings for examples/hello CONFIG_EXAMPLES_HELLO_BUILTIN=y # # Settings for examples/uip CONFIG_EXAMPLE_UIP_NOMAC=y CONFIG_EXAMPLE_UIP_IPADDR=0x0a000002 CONFIG_EXAMPLE_UIP_DRIPADDR=0x0a000001 CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00 CONFIG_EXAMPLE_UIP_DHCPC=n # # Settings for examples/nettest CONFIG_EXAMPLE_NETTEST_SERVER=n CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n CONFIG_EXAMPLE_NETTEST_NOMAC=y CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002 CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001 CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00 CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001 # # Settings for examples/nsh CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_IOBUFFER_SIZE=512 CONFIG_NSH_CMD_SIZE=40 CONFIG_NSH_STACKSIZE=4096 CONFIG_NSH_DHCPC=n CONFIG_NSH_NOMAC=y CONFIG_NSH_IPADDR=0x0a000002 CONFIG_NSH_DRIPADDR=0x0a000001 CONFIG_NSH_NETMASK=0xffffff00 CONFIG_NSH_BUILTIN_APPS=y # # Settings for examples/wget # CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html" CONFIG_EXAMPLE_WGET_NOMAC=y CONFIG_EXAMPLE_WGET_IPADDR=0x0a000002 CONFIG_EXAMPLE_WGET_DRIPADDR=0x0a000001 CONFIG_EXAMPLE_WGET_NETMASK=0xffffff00 # # Stack and heap information # CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=4096 CONFIG_USERMAIN_STACKSIZE=4096 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=4096 CONFIG_HEAP_BASE= CONFIG_HEAP_SIZE=