/**************************************************************************** * fs/mount/fs_mount.c * * Copyright (C) 2007-2009, 2011-2013, 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "inode/inode.h" #include "driver/driver.h" /* At least one filesystem must be defined, or this file will not compile. * It may be desire-able to make filesystems dynamically registered at * some time in the future, but at present, this file needs to know about * every configured filesystem. */ #ifdef CONFIG_FS_READABLE /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* In the canonical case, a file system is bound to a block driver. However, * some less typical cases a block driver is not required. Examples are * pseudo file systems (like BINFS or PROCFS) and MTD file systems (like NXFFS). * * These file systems all require block drivers: */ #if defined(CONFIG_FS_FAT) || defined(CONFIG_FS_ROMFS) || \ defined(CONFIG_FS_SMARTFS) # define BDFS_SUPPORT 1 #endif /* These file systems do not require block drivers */ #if defined(CONFIG_FS_NXFFS) || defined(CONFIG_FS_BINFS) || \ defined(CONFIG_FS_PROCFS) || defined(CONFIG_NFS) || \ defined(CONFIG_FS_TMPFS) # define NONBDFS_SUPPORT #endif /**************************************************************************** * Private Types ****************************************************************************/ struct fsmap_t { FAR const char *fs_filesystemtype; FAR const struct mountpt_operations *fs_mops; }; /**************************************************************************** * Private Data ****************************************************************************/ #ifdef BDFS_SUPPORT #ifdef CONFIG_FS_FAT extern const struct mountpt_operations fat_operations; #endif #ifdef CONFIG_FS_ROMFS extern const struct mountpt_operations romfs_operations; #endif #ifdef CONFIG_FS_SMARTFS extern const struct mountpt_operations smartfs_operations; #endif static const struct fsmap_t g_bdfsmap[] = { #ifdef CONFIG_FS_FAT { "vfat", &fat_operations }, #endif #ifdef CONFIG_FS_ROMFS { "romfs", &romfs_operations }, #endif #ifdef CONFIG_FS_SMARTFS { "smartfs", &smartfs_operations }, #endif { NULL, NULL }, }; #endif /* BDFS_SUPPORT*/ #ifdef NONBDFS_SUPPORT #ifdef CONFIG_FS_NXFFS extern const struct mountpt_operations nxffs_operations; #endif #ifdef CONFIG_FS_TMPFS extern const struct mountpt_operations tmpfs_operations; #endif #ifdef CONFIG_NFS extern const struct mountpt_operations nfs_operations; #endif #ifdef CONFIG_FS_BINFS extern const struct mountpt_operations binfs_operations; #endif #ifdef CONFIG_FS_PROCFS extern const struct mountpt_operations procfs_operations; #endif #ifdef CONFIG_FS_HOSTFS extern const struct mountpt_operations hostfs_operations; #endif static const struct fsmap_t g_nonbdfsmap[] = { #ifdef CONFIG_FS_NXFFS { "nxffs", &nxffs_operations }, #endif #ifdef CONFIG_FS_TMPFS { "tmpfs", &tmpfs_operations }, #endif #ifdef CONFIG_NFS { "nfs", &nfs_operations }, #endif #ifdef CONFIG_FS_BINFS { "binfs", &binfs_operations }, #endif #ifdef CONFIG_FS_PROCFS { "procfs", &procfs_operations }, #endif #ifdef CONFIG_FS_HOSTFS { "hostfs", &hostfs_operations }, #endif { NULL, NULL }, }; #endif /* NONBDFS_SUPPORT */ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mount_findfs * * Description: * find the specified filesystem * ****************************************************************************/ #if defined(BDFS_SUPPORT) || defined(NONBDFS_SUPPORT) static FAR const struct mountpt_operations * mount_findfs(FAR const struct fsmap_t *fstab, FAR const char *filesystemtype) { FAR const struct fsmap_t *fsmap; for (fsmap = fstab; fsmap->fs_filesystemtype; fsmap++) { if (strcmp(filesystemtype, fsmap->fs_filesystemtype) == 0) { return fsmap->fs_mops; } } return NULL; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mount * * Description: * mount() attaches the filesystem specified by the 'source' block device * name into the root file system at the path specified by 'target.' * * Return: * Zero is returned on success; -1 is returned on an error and errno is * set appropriately: * * EACCES A component of a path was not searchable or mounting a read-only * filesystem was attempted without giving the MS_RDONLY flag. * EBUSY 'source' is already mounted. * EFAULT One of the pointer arguments points outside the user address * space. * EINVAL 'source' had an invalid superblock. * ENODEV 'filesystemtype' not configured * ENOENT A pathname was empty or had a nonexistent component. * ENOMEM Could not allocate a memory to copy filenames or data into. * ENOTBLK 'source' is not a block device * ****************************************************************************/ int mount(FAR const char *source, FAR const char *target, FAR const char *filesystemtype, unsigned long mountflags, FAR const void *data) { #if defined(BDFS_SUPPORT) || defined(NONBDFS_SUPPORT) #ifdef BDFS_SUPPORT FAR struct inode *blkdrvr_inode = NULL; #endif FAR struct inode *mountpt_inode; FAR const struct mountpt_operations *mops; void *fshandle; int errcode; int ret; /* Verify required pointer arguments */ DEBUGASSERT(target && filesystemtype); /* Find the specified filesystem. Try the block driver file systems first */ #ifdef BDFS_SUPPORT if (source && (mops = mount_findfs(g_bdfsmap, filesystemtype)) != NULL) { /* Make sure that a block driver argument was provided */ DEBUGASSERT(source); /* Find the block driver */ ret = find_blockdriver(source, mountflags, &blkdrvr_inode); if (ret < 0) { ferr("ERROR: Failed to find block driver %s\n", source); errcode = -ret; goto errout; } } else #endif /* BDFS_SUPPORT */ #ifdef NONBDFS_SUPPORT if ((mops = mount_findfs(g_nonbdfsmap, filesystemtype)) != NULL) { } else #endif /* NONBDFS_SUPPORT */ { ferr("ERROR: Failed to find file system %s\n", filesystemtype); errcode = ENODEV; goto errout; } inode_semtake(); #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS /* Check if the inode already exists */ mountpt_inode = inode_find(target, NULL); if (mountpt_inode != NULL) { /* Yes... Is is a directory node (i.e., not a driver or other special * node. */ if (INODE_IS_SPECIAL(mountpt_inode)) { ferr("ERROR: target %s exists and is a special nodes\n", target); errcode = -ENOTDIR; goto errout_with_semaphore; } /* Successfully found. The reference count on the inode has been * incremented. */ DEBUGASSERT(mountpt_inode->u.i_mops != NULL); } else #endif /* Insert a dummy node -- we need to hold the inode semaphore * to do this because we will have a momentarily bad structure. * NOTE that the new inode will be created with an initial reference * count of zero. */ { ret = inode_reserve(target, &mountpt_inode); if (ret < 0) { /* inode_reserve can fail for a couple of reasons, but the most likely * one is that the inode already exists. inode_reserve may return: * * -EINVAL - 'path' is invalid for this operation * -EEXIST - An inode already exists at 'path' * -ENOMEM - Failed to allocate in-memory resources for the operation */ ferr("ERROR: Failed to reserve inode for target %s\n", target); errcode = -ret; goto errout_with_semaphore; } } /* Bind the block driver to an instance of the file system. The file * system returns a reference to some opaque, fs-dependent structure * that encapsulates this binding. */ if (!mops->bind) { /* The filesystem does not support the bind operation ??? */ ferr("ERROR: Filesystem does not support bind\n"); errcode = EINVAL; goto errout_with_mountpt; } /* Increment reference count for the reference we pass to the file system */ #ifdef BDFS_SUPPORT #ifdef NONBDFS_SUPPORT if (blkdrvr_inode) #endif { blkdrvr_inode->i_crefs++; } #endif /* On failure, the bind method returns -errorcode */ #ifdef BDFS_SUPPORT ret = mops->bind(blkdrvr_inode, data, &fshandle); #else ret = mops->bind(NULL, data, &fshandle); #endif if (ret != 0) { /* The inode is unhappy with the blkdrvr for some reason. Back out * the count for the reference we failed to pass and exit with an * error. */ ferr("ERROR: Bind method failed: %d\n", ret); #ifdef BDFS_SUPPORT #ifdef NONBDFS_SUPPORT if (blkdrvr_inode) #endif { blkdrvr_inode->i_crefs--; } #endif errcode = -ret; goto errout_with_mountpt; } /* We have it, now populate it with driver specific information. */ INODE_SET_MOUNTPT(mountpt_inode); mountpt_inode->u.i_mops = mops; #ifdef CONFIG_FILE_MODE mountpt_inode->i_mode = mode; #endif mountpt_inode->i_private = fshandle; inode_semgive(); /* We can release our reference to the blkdrver_inode, if the filesystem * wants to retain the blockdriver inode (which it should), then it must * have called inode_addref(). There is one reference on mountpt_inode * that will persist until umount2() is called. */ #ifdef BDFS_SUPPORT #ifdef NONBDFS_SUPPORT if (blkdrvr_inode) #endif { inode_release(blkdrvr_inode); } #endif return OK; /* A lot of goto's! But they make the error handling much simpler */ errout_with_mountpt: mountpt_inode->i_crefs = 0; inode_remove(target); inode_semgive(); #ifdef BDFS_SUPPORT #ifdef NONBDFS_SUPPORT if (blkdrvr_inode) #endif { inode_release(blkdrvr_inode); } #endif inode_release(mountpt_inode); goto errout; errout_with_semaphore: inode_semgive(); #ifdef BDFS_SUPPORT #ifdef NONBDFS_SUPPORT if (blkdrvr_inode) #endif { inode_release(blkdrvr_inode); } #endif errout: set_errno(errcode); return ERROR; #else ferr("ERROR: No filesystems enabled\n"); set_errno(ENOSYS); return ERROR; #endif /* BDFS_SUPPORT || NONBDFS_SUPPORT */ } #endif /* CONFIG_FS_READABLE */