/**************************************************************************** * net/udp/udp_sendto_unbuffered.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET_UDP #include #include #include #include #include #include #include #include #include #include #include "netdev/netdev.h" #include "devif/devif.h" #include "arp/arp.h" #include "icmpv6/icmpv6.h" #include "socket/socket.h" #include "udp/udp.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* If both IPv4 and IPv6 support are both enabled, then we will need to build * in some additional domain selection support. */ #if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6) # define NEED_IPDOMAIN_SUPPORT 1 #endif /**************************************************************************** * Private Types ****************************************************************************/ struct sendto_s { #ifdef NEED_IPDOMAIN_SUPPORT FAR struct socket *st_sock; /* Points to the parent socket structure */ #endif FAR struct devif_callback_s *st_cb; /* Reference to callback instance */ FAR struct net_driver_s *st_dev; /* Driver that will perform the transmission */ sem_t st_sem; /* Semaphore signals sendto completion */ uint16_t st_buflen; /* Length of send buffer (error if <0) */ const char *st_buffer; /* Pointer to send buffer */ int st_sndlen; /* Result of the send (length sent or negated errno) */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: sendto_ipselect * * Description: * If both IPv4 and IPv6 support are enabled, then we will need to select * which one to use when generating the outgoing packet. If only one * domain is selected, then the setup is already in place and we need do * nothing. * * Input Parameters: * dev - The structure of the network driver that caused the event * pstate - sendto state structure * * Returned Value: * None * * Assumptions: * This function must be called with the network locked. * ****************************************************************************/ #ifdef NEED_IPDOMAIN_SUPPORT static inline void sendto_ipselect(FAR struct net_driver_s *dev, FAR struct sendto_s *pstate) { FAR struct socket *psock = pstate->st_sock; DEBUGASSERT(psock); /* Which domain the socket support */ if (psock->s_domain == PF_INET) { /* Select the IPv4 domain */ udp_ipv4_select(dev); } else /* if (psock->s_domain == PF_INET6) */ { /* Select the IPv6 domain */ DEBUGASSERT(psock->s_domain == PF_INET6); udp_ipv6_select(dev); } } #endif /**************************************************************************** * Name: sendto_eventhandler * * Description: * This function is called to perform the actual send operation when * polled by the lower, device interfacing layer. * * Input Parameters: * dev The structure of the network driver that caused the event * conn An instance of the UDP connection structure cast to void * * pvpriv An instance of struct sendto_s cast to void* * flags Set of events describing why the callback was invoked * * Returned Value: * Modified value of the input flags * * Assumptions: * This function must be called with the network locked. * ****************************************************************************/ static uint16_t sendto_eventhandler(FAR struct net_driver_s *dev, FAR void *conn, FAR void *pvpriv, uint16_t flags) { FAR struct sendto_s *pstate = (FAR struct sendto_s *)pvpriv; DEBUGASSERT(pstate != NULL && pstate->st_dev != NULL); if (pstate != NULL) { /* The TCP socket should be bound to a device. Make sure that the * polling device is the one that we are bound to. */ if (dev != pstate->st_dev) { /* Ignore this poll. Wait for the right device */ return flags; } ninfo("flags: %04x\n", flags); /* If the network device has gone down, then we will have terminate * the wait now with an error. */ if ((flags & NETDEV_DOWN) != 0) { /* Terminate the transfer with an error. */ nwarn("WARNING: Network is down\n"); pstate->st_sndlen = -ENETUNREACH; } /* Check if the outgoing packet is available. It may have been claimed * by a sendto event serving a different thread -OR- if the output * buffer currently contains unprocessed incoming data. In these cases * we will just have to wait for the next polling cycle. */ else if (dev->d_sndlen > 0 || (flags & UDP_NEWDATA) != 0) { /* Another thread has beat us sending data or the buffer is busy, * wait for the next polling cycle and check again. */ return flags; } /* It looks like we are good to send the data */ else { #ifdef NEED_IPDOMAIN_SUPPORT /* If both IPv4 and IPv6 support are enabled, then we will need to * select which one to use when generating the outgoing packet. * If only one domain is selected, then the setup is already in * place and we need do nothing. */ sendto_ipselect(dev, pstate); #endif /* Copy the user data into d_appdata and send it */ devif_send(dev, pstate->st_buffer, pstate->st_buflen); pstate->st_sndlen = pstate->st_buflen; } /* Don't allow any further call backs. */ pstate->st_cb->flags = 0; pstate->st_cb->priv = NULL; pstate->st_cb->event = NULL; /* Wake up the waiting thread */ nxsem_post(&pstate->st_sem); } return flags; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: psock_udp_sendto * * Description: * This function implements the UDP-specific logic of the standard * sendto() socket operation. * * Input Parameters: * psock A pointer to a NuttX-specific, internal socket structure * buf Data to send * len Length of data to send * flags Send flags * to Address of recipient * tolen The length of the address structure * * NOTE: All input parameters were verified by sendto() before this * function was called. * * Returned Value: * On success, returns the number of characters sent. On error, * a negated errno value is returned. See the description in * net/socket/sendto.c for the list of appropriate return value. * ****************************************************************************/ ssize_t psock_udp_sendto(FAR struct socket *psock, FAR const void *buf, size_t len, int flags, FAR const struct sockaddr *to, socklen_t tolen) { FAR struct udp_conn_s *conn; struct sendto_s state; int ret; /* If the UDP socket was previously assigned a remote peer address via * connect(), then as with connection-mode socket, sendto() may not be * used with a non-NULL destination address. Normally send() would be * used with such connected UDP sockets. */ if (to != NULL && _SS_ISCONNECTED(psock->s_flags)) { /* EISCONN - A destination address was specified and the socket is * already connected. */ return -EISCONN; } /* Otherwise, if the socket is not connected, then a destination address * must be provided. */ else if (to == NULL && !_SS_ISCONNECTED(psock->s_flags)) { /* EDESTADDRREQ - The socket is not connection-mode and no peer\ * address is set. */ return -EDESTADDRREQ; } /* Get the underlying the UDP connection structure. */ conn = (FAR struct udp_conn_s *)psock->s_conn; DEBUGASSERT(conn); #if defined(CONFIG_NET_ARP_SEND) || defined(CONFIG_NET_ICMPv6_NEIGHBOR) #ifdef CONFIG_NET_ARP_SEND /* Assure the the IPv4 destination address maps to a valid MAC address in * the ARP table. */ #ifdef CONFIG_NET_ICMPv6_NEIGHBOR if (psock->s_domain == PF_INET) #endif { in_addr_t destipaddr; /* Check if the socket is connection mode */ if (_SS_ISCONNECTED(psock->s_flags)) { /* Yes.. use the connected remote address (the 'to' address is * null). */ destipaddr = conn->u.ipv4.raddr; } else { FAR const struct sockaddr_in *into; /* No.. use the destination address provided by the non-NULL 'to' * argument. */ into = (FAR const struct sockaddr_in *)to; destipaddr = into->sin_addr.s_addr; } /* Make sure that the IP address mapping is in the ARP table */ ret = arp_send(destipaddr); } #endif /* CONFIG_NET_ARP_SEND */ #ifdef CONFIG_NET_ICMPv6_NEIGHBOR /* Assure the the IPv6 destination address maps to a valid MAC address in * the neighbor table. */ #ifdef CONFIG_NET_ARP_SEND else #endif { FAR const uint16_t *destipaddr; /* Check if the socket is connection mode */ if (_SS_ISCONNECTED(psock->s_flags)) { /* Yes.. use the connected remote address (the 'to' address is * null). */ destipaddr = conn->u.ipv6.raddr; } else { FAR const struct sockaddr_in6 *into; /* No.. use the destination address provided by the non-NULL 'to' * argument. */ into = (FAR const struct sockaddr_in6 *)to; destipaddr = into->sin6_addr.s6_addr16; } /* Make sure that the IP address mapping is in the Neighbor Table */ ret = icmpv6_neighbor(destipaddr); } #endif /* CONFIG_NET_ICMPv6_NEIGHBOR */ /* Did we successfully get the address mapping? */ if (ret < 0) { nerr("ERROR: Peer not reachable\n"); return -ENETUNREACH; } #endif /* CONFIG_NET_ARP_SEND || CONFIG_NET_ICMPv6_NEIGHBOR */ /* Initialize the state structure. This is done with the network * locked because we don't want anything to happen until we are * ready. */ net_lock(); memset(&state, 0, sizeof(struct sendto_s)); /* This semaphore is used for signaling and, hence, should not have * priority inheritance enabled. */ nxsem_init(&state.st_sem, 0, 0); nxsem_set_protocol(&state.st_sem, SEM_PRIO_NONE); state.st_buflen = len; state.st_buffer = buf; #ifdef NEED_IPDOMAIN_SUPPORT /* Save the reference to the socket structure if it will be needed for * asynchronous processing. */ state.st_sock = psock; #endif /* Check if the socket is connected */ if (!_SS_ISCONNECTED(psock->s_flags)) { /* No.. Call udp_connect() to set the remote address in the connection * structure to the sendto() destination address. */ ret = udp_connect(conn, to); if (ret < 0) { nerr("ERROR: udp_connect failed: %d\n", ret); goto errout_with_lock; } } /* Get the device that will handle the remote packet transfers. This * should never be NULL. */ state.st_dev = udp_find_raddr_device(conn); if (state.st_dev == NULL) { nerr("ERROR: udp_find_raddr_device failed\n"); ret = -ENETUNREACH; goto errout_with_lock; } /* Make sure that the device is in the UP state */ if ((state.st_dev->d_flags & IFF_UP) == 0) { nwarn("WARNING: device is DOWN\n"); ret = -EHOSTUNREACH; goto errout_with_lock; } /* Set up the callback in the connection */ ret = -ENOMEM; /* Assume allocation failure */ state.st_cb = udp_callback_alloc(state.st_dev, conn); if (state.st_cb) { state.st_cb->flags = (UDP_POLL | NETDEV_DOWN); state.st_cb->priv = (FAR void *)&state; state.st_cb->event = sendto_eventhandler; /* Notify the device driver of the availability of TX data */ netdev_txnotify_dev(state.st_dev); /* Wait for either the receive to complete or for an error/timeout to * occur. NOTES: net_timedwait will also terminate if a signal * is received. */ ret = net_timedwait(&state.st_sem, _SO_TIMEOUT(psock->s_sndtimeo)); if (ret >= 0) { /* The result of the sendto operation is the number of bytes * transferred. */ ret = state.st_sndlen; } /* Make sure that no further events are processed */ udp_callback_free(state.st_dev, conn, state.st_cb); } errout_with_lock: /* Release the semaphore */ nxsem_destroy(&state.st_sem); /* Unlock the network and return the result of the sendto() operation */ net_unlock(); return ret; } /**************************************************************************** * Name: psock_udp_cansend * * Description: * psock_udp_cansend() returns a value indicating if a write to the socket * would block. It is still possible that the write may block if another * write occurs first. * * Input Parameters: * psock An instance of the internal socket structure. * * Returned Value: * OK (Always can send). * * Assumptions: * None * ****************************************************************************/ int psock_udp_cansend(FAR struct socket *psock) { return OK; } #endif /* CONFIG_NET_UDP */