/**************************************************************************** * drivers/1wire/1wire.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "1wire_internal.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define MATCH_FAMILY(rom, family) ((family) == 0 || ((rom) & 0xff) == (family)) #ifndef CONFIG_ENDIAN_BIG # define onewire_leuint64(x) (x) # define onewire_leuint32(x) (x) #endif #define NO_HOLDER (INVALID_PROCESS_ID) /**************************************************************************** * Private Function Prototypes ****************************************************************************/ #ifdef CONFIG_PM static int onewire_pm_prepare(FAR struct pm_callback_s *cb, int domain, enum pm_state_e pmstate); #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: onewire_leuint64 * * Description: * Get a 64-bit value stored in little endian order for a big-endian * machine. * ****************************************************************************/ #ifdef CONFIG_ENDIAN_BIG static inline uint64_t onewire_leuint64(uint64_t x) { return (((x & 0xff00000000000000ull) >> 56) | ((x & 0x00ff000000000000ull) >> 40) | ((x & 0x0000ff0000000000ull) >> 24) | ((x & 0x000000ff00000000ull) >> 8) | ((x & 0x00000000ff000000ull) << 8) | ((x & 0x0000000000ff0000ull) << 24) | ((x & 0x000000000000ff00ull) << 40) | ((x & 0x00000000000000ffull) << 56)); } #endif /**************************************************************************** * Name: onewire_leuint32 * * Description: * Get a 32-bit value stored in little endian order for a big-endian * machine. * ****************************************************************************/ #ifdef CONFIG_ENDIAN_BIG static inline uint32_t onewire_leuint32(uint32_t x) { return (((x & 0xff000000) >> 24) | ((x & 0x00ff0000) >> 8) | ((x & 0x0000ff00) << 8) | ((x & 0x000000ff) << 24)); } #endif /**************************************************************************** * Name: onewire_pm_prepare * * Description: * Request the driver to prepare for a new power state. This is a * warning that the system is about to enter into a new power state. The * driver should begin whatever operations that may be required to enter * power state. The driver may abort the state change mode by returning * a non-zero value from the callback function. * * Input Parameters: * cb - Returned to the driver. The driver version of the callback * structure may include additional, driver-specific state * data at the end of the structure. * domain - Identifies the activity domain of the state change * pmstate - Identifies the new PM state * * Returned Value: * 0 (OK) means the event was successfully processed and that the driver * is prepared for the PM state change. Non-zero means that the driver * is not prepared to perform the tasks needed achieve this power setting * and will cause the state change to be aborted. NOTE: The prepare * method will also be recalled when reverting from lower back to higher * power consumption modes (say because another driver refused a lower * power state change). Drivers are not permitted to return non-zero * values when reverting back to higher power consumption modes! * ****************************************************************************/ #ifdef CONFIG_PM static int onewire_pm_prepare(FAR struct pm_callback_s *cb, int domain, enum pm_state_e pmstate) { struct onewire_master_s *master; master = container_of(cb, struct onewire_master_s, pm_cb); /* Logic to prepare for a reduced power state goes here. */ switch (pmstate) { case PM_NORMAL: case PM_IDLE: break; case PM_STANDBY: case PM_SLEEP: /* Check if exclusive lock for the bus master is held. */ if (nxrmutex_is_locked(&master->devlock)) { /* Exclusive lock is held, do not allow entry to deeper PM * states. */ return -EBUSY; } break; default: /* Should not get here */ break; } return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: onewire_reset_resume * * Description: * ****************************************************************************/ int onewire_reset_resume(FAR struct onewire_master_s *master) { int ret; uint8_t buf[] = { ONEWIRE_CMD_RESUME }; ret = ONEWIRE_RESET(master->dev); if (ret < 0) { return ret; } return ONEWIRE_WRITE(master->dev, buf, 1); } /**************************************************************************** * Name: onewire_reset_select * * Description: * ****************************************************************************/ int onewire_reset_select(FAR struct onewire_master_s *master, uint64_t romcode) { uint64_t tmp; uint8_t skip_rom[1] = { ONEWIRE_CMD_SKIP_ROM }; uint8_t match_rom[9] = { ONEWIRE_CMD_MATCH_ROM, 0 }; int ret; ret = ONEWIRE_RESET(master->dev); if (ret < 0) { return ret; } /* Issue skip-ROM if single slave, match-ROM otherwise. */ if (master->nslaves == 1 || master->maxslaves == 1) { ret = ONEWIRE_WRITE(master->dev, skip_rom, sizeof(skip_rom)); } else { tmp = onewire_leuint64(romcode); memcpy(&match_rom[1], &tmp, 8); ret = ONEWIRE_WRITE(master->dev, match_rom, sizeof(match_rom)); } return ret; } /**************************************************************************** * Name: onewire_readrom * * Description: * ****************************************************************************/ int onewire_readrom(FAR struct onewire_master_s *master, FAR uint64_t *rom) { uint8_t txbuf[] = { ONEWIRE_CMD_READ_ROM }; uint8_t rxbuf[8] = { 0 }; uint64_t tmp = -1; int ret; DEBUGASSERT(master != NULL && rom != NULL); /* Read ROM-code of single connected slave and check its checksum. */ ret = ONEWIRE_RESET(master->dev); if (ret < 0) { return ret; } ret = ONEWIRE_WRITE(master->dev, txbuf, sizeof(txbuf)); if (ret < 0) { return ret; } ret = ONEWIRE_READ(master->dev, rxbuf, sizeof(rxbuf)); if (ret < 0) { return ret; } #ifdef CONFIG_DEBUG_I2C_INFO lib_dumpbuffer("onewire_readrom: rxbuf", rxbuf, sizeof(rxbuf)); #endif tmp = onewire_leuint64(*(uint64_t *)rxbuf); #ifdef CONFIG_DEBUG_FEATURES if (!onewire_valid_rom(tmp)) { i2cerr("ERROR: crc8 does not match!\n"); ret = -EIO; } #endif *rom = tmp; return ret; } /**************************************************************************** * Name: onewire_triplet * * Description: * Used by 1-wire search algorithm. Reads two bits and writes * one based on comparison of read bits. * * Input Parameters: * search_bit - Bit to write if both id_bit and cmp_id_bit match * * Output Parameters: * taken_bit - Bit indicating the direction where the search is * progressing. * * Return Value: * Number of valid bits or negative on error. * ****************************************************************************/ int onewire_triplet(FAR struct onewire_master_s *master, uint8_t search_bit, FAR uint8_t *taken_bit) { int ret; int nvalid; uint8_t id_bit; uint8_t cmp_id_bit; ret = ONEWIRE_READBIT(master->dev, &id_bit); if (ret < 0) { return ret; } ret = ONEWIRE_READBIT(master->dev, &cmp_id_bit); if (ret < 0) { return ret; } if (id_bit == 1 && cmp_id_bit == 1) { /* No devices on bus */ return 0; } else if (id_bit != cmp_id_bit) { /* Only one bit is valid, search to that direction. */ nvalid = 1; *taken_bit = id_bit; } else { /* Two bits are valid, search to pre-determined direction. */ nvalid = 2; *taken_bit = search_bit; } ret = ONEWIRE_WRITEBIT(master->dev, taken_bit); if (ret < 0) { return ret; } return nvalid; } /**************************************************************************** * Name: onewire_search * * Description: * Search all devices from a 1-wire network. This is the 1-wire search * algorithm from Maxim Application Note 187. * * Input Parameters: * master - Pointer to the allocated 1-wire interface * family - Limit search to devices of matching family * alarmonly - Limit search to devices on alarm state * cb_search - Callback to call on each device found * arg - Argument passed to cb_search * * Return Value: * Number of slaves present and matching family. * ****************************************************************************/ int onewire_search(FAR struct onewire_master_s *master, int family, bool alarmonly, CODE void (*cb_search)(int family, uint64_t romcode, FAR void *arg), FAR void *arg) { FAR struct onewire_dev_s *dev = master->dev; uint8_t cmd[1]; uint64_t rom = 0; uint64_t last_rom; int last_zero = -1; int last_bit = 64; /* bit of last discrepancy */ int nslaves = 0; int nslaves_match = 0; int ret; /* Disallow nested search. */ DEBUGASSERT(master->insearch == false); /* Make complete search on the bus mutal exclusive */ ret = nxrmutex_lock(&master->devlock); if (ret < 0) { return ret; } /* Skip costly search if bus supports only a single slave. */ if (master->maxslaves == 1) { ret = onewire_readrom(master, &rom); if (ret >= 0 && MATCH_FAMILY(rom, family)) { master->insearch = true; cb_search(rom & 0xff, rom, arg); master->insearch = false; nslaves_match++; } goto unlock; } /* Select search type. */ cmd[0] = alarmonly ? ONEWIRE_CMD_ALARM_SEARCH : ONEWIRE_CMD_SEARCH; while (nslaves++ < master->maxslaves) { int i; /* Reset bus so slaves are ready to answer our probing. */ ret = ONEWIRE_RESET(dev); if (ret < 0) { goto unlock; } /* Send the Search-ROM command. */ ret = ONEWIRE_WRITE(dev, cmd, sizeof(cmd)); if (ret < 0) { goto unlock; } last_rom = rom; rom = 0; /* TODO: setup initial rom from family to reduce search space. */ for (i = 0; i < 64; i++) { uint8_t search_bit; uint8_t taken_bit; /* Setup search direction. */ if (i == last_bit) { search_bit = 1; } else if (i > last_bit) { search_bit = 0; } else { search_bit = !!(last_rom & (1 << i)); } ret = onewire_triplet(master, search_bit, &taken_bit); if (ret <= 0) { /* Error or zero valid directions. */ goto unlock; } if (ret == 2 && taken_bit == 0) { /* If both directions were valid, and we took the 0 path, * remember this. */ last_zero = i; } /* Update rom code from taken bit. */ rom |= (uint64_t)taken_bit << i; } #ifdef CONFIG_DEBUG_FEATURES if (!onewire_valid_rom(rom)) { i2cerr("ERROR: crc8 does not match!\n"); } #endif if (last_zero == last_bit || last_zero == -1) { i2cinfo("search complete, rom=0x%llx\n", rom); /* Found last device, quit searching. */ if (MATCH_FAMILY(rom, family)) { master->insearch = true; cb_search(rom & 0xff, rom, arg); master->insearch = false; nslaves_match++; } break; } last_bit = last_zero; /* Found device, will keep looking for more. */ if (MATCH_FAMILY(rom, family)) { master->insearch = true; cb_search(rom & 0xff, rom, arg); master->insearch = false; nslaves_match++; } /* TODO: does not handle case when there are more than maxslaves * slaves present in the bus. */ } unlock: nxrmutex_unlock(&master->devlock); return (ret < 0) ? ret : nslaves_match; } /**************************************************************************** * Name: onewire_addslave * * Description: * ****************************************************************************/ int onewire_addslave(FAR struct onewire_master_s *master, FAR struct onewire_slave_s *slave) { DEBUGASSERT(master != NULL && slave != NULL); DEBUGASSERT(slave->master == NULL); if (master->nslaves >= master->maxslaves) { return -EAGAIN; } /* TODO: linked list of slaves? */ master->nslaves++; slave->master = master; return OK; } /**************************************************************************** * Name: onewire_removeslave * * Description: * ****************************************************************************/ int onewire_removeslave(FAR struct onewire_master_s *master, FAR struct onewire_slave_s *slave) { DEBUGASSERT(master != NULL && slave != NULL); DEBUGASSERT(master->nslaves > 0 && slave->master == master); /* TODO: linked list of slaves? */ master->nslaves--; slave->master = NULL; return OK; } /**************************************************************************** * Name: onewire_initialize * * Description: * Return 1-wire bus master from 1-wire lower half device. * * Input Parameters: * dev - Pointer to the allocated 1-wire lower half * maxslaves - Maximum number of 1-wire slave devices * ****************************************************************************/ FAR struct onewire_master_s * onewire_initialize(FAR struct onewire_dev_s *dev, int maxslaves) { FAR struct onewire_master_s *master; DEBUGASSERT(dev != NULL); DEBUGASSERT(maxslaves > 0); master = (FAR struct onewire_master_s *) kmm_malloc(sizeof(struct onewire_master_s)); if (master == NULL) { i2cerr("ERROR: Failed to allocate\n"); return NULL; } /* Initialize the device structure */ master->dev = dev; nxrmutex_init(&master->devlock); master->nslaves = 0; master->maxslaves = maxslaves; master->insearch = false; #ifdef CONFIG_PM master->pm_cb.prepare = onewire_pm_prepare; /* Register to receive power management callbacks */ pm_register(&master->pm_cb); #endif return master; } /**************************************************************************** * Name: onewire_uninitialize * * Description: * Release 1-wire bus master. * * Input Parameters: * master - Pointer to the allocated 1-wire master * ****************************************************************************/ int onewire_uninitialize(FAR struct onewire_master_s *master) { #ifdef CONFIG_PM /* Unregister power management callbacks */ pm_unregister(&master->pm_cb); #endif /* Release resources. This does not touch the underlying onewire_dev_s */ nxrmutex_destroy(&master->devlock); kmm_free(master); return OK; }