/**************************************************************************** * net/mld/mld_query.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include "devif/devif.h" #include "inet/inet.h" #include "mld/mld.h" #include "utils/utils.h" /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mld_check_v1compat * * Description: * If this is for MLDv1 query, then select MLDv1 compatibility mode and * start (or re-start) the compatibility timer. We need to make this * check BEFORE sending the report. * ****************************************************************************/ static inline void mld_check_v1compat(FAR struct net_driver_s *dev, bool mldv1) { if (mldv1) { /* REVISIT: I am confused. Per RFC 3810: * "The Older Version Querier Present Timeout is the time-out for * transitioning a host back to MLDv2 Host Compatibility Mode. When * an MLDv1 query is received, MLDv2 hosts set their Older Version * Querier Present Timer to [Older Version Querier Present Timeout]. * * "This value MUST be ([Robustness Variable] times (the [Query * Interval] in the last Query received)) plus ([Query Response * Interval])." * * I am not sure how to do that since the MLDv1 version has no QQI * field. That is an MLDv2 extension. */ /* Select MLDv1 compatibility mode (might already be selected) */ SET_MLD_V1COMPAT(dev->d_mld.flags); /* REVISIT: Whenever a host changes its compatibility mode, it cancels * all its pending responses and retransmission timers. Logic Missing. */ /* And start the MLDv1 compatibility timer. If the timer is already * running, this will reset the timer. */ mld_start_v1timer(dev, MSEC2TICK(MLD_V1PRESENT_MSEC((clock_t)MLD_QUERY_MSEC))); } } /**************************************************************************** * Name: mld_mrc2mrd * * Description: * Convert the MLD Maximum Response Code (MRC) to the Maximum Response * Delay (MRD) in units of system clock ticks. * ****************************************************************************/ #if 0 /* Not used */ static clock_t mld_mrc2mrd(uint16_t mrc) { uint32_t mrd; /* Units of milliseconds */ /* If bit 15 is not set (i.e., mrc < 32768), * then no conversion is required. */ if (mrc < 32768) { mrd = mrc; } else { /* Conversion required */ mrd = MLD_MRD_VALUE(mrc); } /* Return the MRD in units of clock ticks */ return MSEC2TICK((clock_t)mrd); } #endif /**************************************************************************** * Name: mld_cmpaddr * * Description: * Perform a numerical comparison of the IPv6 Source Address and the IPv6 * address of the link. Return true if the source address is less than * the link address. * ****************************************************************************/ static bool mld_cmpaddr(FAR struct net_driver_s *dev, const net_ipv6addr_t srcaddr) { int i; for (i = 0; i < 8; i++) { if (srcaddr[i] < dev->d_ipv6addr[i]) { return true; } } return false; } /**************************************************************************** * Name: mld_check_querier * * Description: * Check if we are still the querier (assuming that we are currently the * querier). This compares the IPv6 Source Address of the query against * the IPv6 address of the link. If the source address is numerically * less than the link address, when we are no longer the querier. * ****************************************************************************/ static void mld_check_querier(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6) { /* Check if this member is a Querier */ if (IS_MLD_QUERIER(dev->d_mld.flags)) { /* This is a querier, check if the IPv6 source address is numerically * less than the IPv6 address assigned to this link. */ if (mld_cmpaddr(dev, ipv6->srcipaddr)) { /* Switch to non-Querier mode */ CLR_MLD_QUERIER(dev->d_mld.flags); } } /* Check if the member is a Non-Querier. */ if (!IS_MLD_QUERIER(dev->d_mld.flags)) { /* Yes.. [re-]start the 'Other Querier Present' Timeout. */ mld_start_gentimer(dev, MSEC2TICK(MLD_OQUERY_MSEC)); } } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mld_query * * Description: * Called from icmpv6_input() when a Multicast Listener Query is received. * * A router may assume one of two roles: Querier or Non-Querier. There is * normally only one Querier per link. All routers start up as a Querier * on each of their attached links. If a router hears a Query message * whose IPv6 Source Address is numerically less than its own selected * address for that link, it MUST become a Non-Querier on that link. If a * delay passes without receiving, from a particular attached link, any * Queries from a router with an address less than its own, a router * resumes the role of Querier on that link. * * A Querier for a link periodically sends a General Query on that link, * to solicit reports of all multicast addresses of interest on that link. * On startup, a router SHOULD send multiple General Queries spaced closely * together Interval] on all attached links in order to quickly and * reliably discover the presence of multicast listeners on those links. * ****************************************************************************/ int mld_query(FAR struct net_driver_s *dev, FAR const struct mld_mcast_listen_query_s *query) { FAR struct ipv6_hdr_s *ipv6 = IPv6BUF; FAR struct mld_group_s *group; unsigned int mldsize; bool mldv1 = false; mldinfo("Multicast Listener Query\n"); #if 0 /* Not used */ /* Max Response Delay. The Max Response Code field specifies the maximum * allowed time before sending a responding report in units of 1/10 second. */ mrc = NTOHS(query->mrc); #endif /* The MLD version of a Multicast Listener Query message is determined * as follows: * * MLDv1 Query: length = 24 octets * MLDv2 Query: length >= 28 octets * * Query messages that do not match any of the above conditions (e.g., a * Query of length 26 octets) MUST be silently ignored. */ mldsize = (unsigned int)ipv6->len[0] << 8 | ipv6->len[1]; if (mldsize == sizeof(struct mld_mcast_listen_report_v1_s)) { mldv1 = true; } else if (mldsize < SIZEOF_MLD_MCAST_LISTEN_QUERY_S(0)) { mldinfo("WARNING: Invalid size for MLD query: %u\n", mldsize); dev->d_len = 0; return -EINVAL; } /* Warn if we received a MLDv2 query in MLDv1 compatibility mode. */ if (!mldv1 && IS_MLD_V1COMPAT(dev->d_mld.flags)) { mldwarn("WARNING: MLDv2 query received in MLDv1 compatibility mode\n"); } /* There are three variants of the Query message (RFC 3810): * * 1. A "General Query" is sent by the Querier to learn which * multicast addresses have listeners on an attached link. In a * General Query, both the Multicast Address field and the Number * of Sources (N) field are zero. * 2. A "Multicast Address Specific Query" is sent by the Querier to * learn if a particular multicast address has any listeners on an * attached link. In a Multicast Address Specific Query, the * Multicast Address field contains the multicast address of * interest, while the Number of Sources (N) field is set to zero. * 3. A "Multicast Address and Source Specific Query" is sent by the * Querier to learn if any of the sources from the specified list for * the particular multicast address has any listeners on an attached * link or not. In a Multicast Address and Source Specific Query the * Multicast Address field contains the multicast address of * interest, while the Source Address [i] field(s) contain(s) the * source address(es) of interest. * * Another possibility is a Unicast query that is sent specifically * to our local IP address. */ /* Check the destination address. This varies with the type of message * being sent: * * MESSAGE DESTINATION ADDRESS * General Query Message: The link-local, all nodes multicast address * MAS Query Messages: The group multicast address */ /* Check for a General Query */ if (net_ipv6addr_cmp(ipv6->destipaddr, g_ipv6_allnodes) && net_ipv6addr_cmp(query->grpaddr, g_ipv6_unspecaddr) && query->nsources == 0) { FAR struct mld_group_s *member; bool rptsent = false; /* This is the general query */ mldinfo("General multicast query\n"); MLD_STATINCR(g_netstats.mld.gm_query_received); /* Check if we are still the querier for this sub-net */ mld_check_querier(dev, ipv6); #ifdef CONFIG_NET_MLD_ROUTER /* Update accumulated membership at the beginning of each new poll * cycle */ mld_new_pollcycle(dev); #endif /* Check MLDv1 compatibility mode */ mld_check_v1compat(dev, mldv1); /* Send the Report in response to the query. This has to be done * multiple times because because there is only a single packet buffer * that is used for both incoming and outgoing packets. When the * report is sent, it will clobber the incoming* query. Any attempt * to send an additional Report would also clobber a preceding report */ for (member = (FAR struct mld_group_s *)dev->d_mld.grplist.head; member != NULL; member = member->next) { /* Skip over the all systems group entry */ if (!net_ipv6addr_cmp(member->grpaddr, g_ipv6_allnodes)) { /* Have we already sent a report from this loop? */ if (rptsent) { /* Yes.. Just mark that a report as pending. The pending * flag will checked on the next driver poll. */ SET_MLD_RPTPEND(member->flags); } else { /* No.. Send one report now. */ mld_send(dev, member, mld_report_msgtype(dev)); rptsent = true; CLR_MLD_RPTPEND(member->flags); } } } /* Need to set d_len to zero if nothing is being sent */ if (!rptsent) { dev->d_len = 0; } return OK; } /* All of other Queries are sent with the group address set. Find the * group instance associated with this group address. For the purpose of * sending reports, we only care about the query if we are a member of the * group. */ group = mld_grpfind(dev, query->grpaddr); if (group == NULL) { mldinfo("We are not a member of this group\n"); dev->d_len = 0; return -ENOENT; } /* Check if we are still the querier for this group */ mld_check_querier(dev, ipv6); #ifdef CONFIG_NET_MLD_ROUTER /* Save the number of members that reported in the previous query cycle; * reset the number of members that have reported in the new query cycle. */ group->lstmbrs = group->members; group->members = 0; #endif /* Warn if we received a MLDv2 query in MLDv1 compatibility mode. */ if (!mldv1 && IS_MLD_V1COMPAT(dev->d_mld.flags)) { mldinfo("WARNING: MLDv2 query received in MLDv1 compatibility mode\n"); } /* Check for Multicast Address Specific (MAS) Query or a Multicast Address * and Source Specific (MASS) Query. MAS and MASS queries are sent with * an IP destination address equal to the multicast address of interest. */ if (net_ipv6addr_cmp(ipv6->destipaddr, group->grpaddr)) { if (query->nsources == 0) { mldinfo("Multicast Address Specific Query\n"); MLD_STATINCR(g_netstats.mld.mas_query_received); } else { mldinfo("Multicast Address and Source Specific Query\n"); MLD_STATINCR(g_netstats.mld.mass_query_received); } /* Check MLDv1 compatibility mode */ mld_check_v1compat(dev, mldv1); /* Send the report */ mld_send(dev, group, mld_report_msgtype(dev)); CLR_MLD_RPTPEND(group->flags); } /* Not sent to all systems. Check for Unicast General Query */ else if (net_ipv6addr_cmp(ipv6->destipaddr, dev->d_ipv6addr)) { mldinfo("Unicast query\n"); MLD_STATINCR(g_netstats.mld.ucast_query_received); /* Check MLDv1 compatibility mode */ mld_check_v1compat(dev, mldv1); /* Send the report */ mld_send(dev, group, mld_report_msgtype(dev)); CLR_MLD_RPTPEND(group->flags); } else { mldinfo("WARNING: Unhandled query\n"); MLD_STATINCR(g_netstats.mld.bad_query_received); /* Need to set d_len to zero to indication that nothing is being sent */ dev->d_len = 0; } return OK; }