/**************************************************************************** * net/socket/setsockopt.c * * Copyright (C) 2007, 2008, 2011-2012, 2014-2015, 2017-2018, 2020 Gregory * Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #if defined(CONFIG_NET) && defined(CONFIG_NET_SOCKOPTS) #include #include #include #include #include #include #include #include #include "socket/socket.h" #include "inet/inet.h" #include "tcp/tcp.h" #include "udp/udp.h" #include "usrsock/usrsock.h" #include "utils/utils.h" #include "can/can.h" /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: psock_socketlevel_option * * Description: * psock_socketlevel_option() sets the socket-level option specified by the * 'option' argument to the value pointed to by the 'value' argument for * the socket specified by the 'psock' argument. * * See a complete list of values for the socket level * 'option' argument. * * Input Parameters: * psock Socket structure of socket to operate on * option identifies the option to set * value Points to the argument value * value_len The length of the argument value * * Returned Value: * Returns zero (OK) on success. On failure, it returns a negated errno * value to indicate the nature of the error. See psock_setcockopt() for * the list of possible error values. * ****************************************************************************/ static int psock_socketlevel_option(FAR struct socket *psock, int option, FAR const void *value, socklen_t value_len) { /* Verify that the socket option if valid (but might not be supported ) */ if (!_SO_SETVALID(option) || !value) { return -EINVAL; } #ifdef CONFIG_NET_USRSOCK if (psock->s_type == SOCK_USRSOCK_TYPE) { FAR struct usrsock_conn_s *conn = psock->s_conn; DEBUGASSERT(conn); /* Some of the socket options are handled from this function. */ switch (option) { case SO_RCVTIMEO: /* Rx timeouts can be handled at NuttX side, thus * simplify daemon implementation. */ case SO_SNDTIMEO: /* Rx timeouts can be handled at NuttX side, thus * simplify daemon implementation. */ break; default: /* Other options are passed to usrsock daemon. */ { return usrsock_setsockopt(conn, SOL_SOCKET, option, value, value_len); } } } #endif /* Process the option */ switch (option) { /* The following options take a pointer to an integer boolean value. * We will blindly set the bit here although the implementation * is outside of the scope of setsockopt. */ case SO_BROADCAST: /* Permits sending of broadcast messages */ case SO_DEBUG: /* Enables recording of debugging information */ case SO_DONTROUTE: /* Requests outgoing messages bypass standard routing */ #ifndef CONFIG_NET_TCPPROTO_OPTIONS case SO_KEEPALIVE: /* Verifies TCP connections active by enabling the * periodic transmission of probes */ #endif case SO_OOBINLINE: /* Leaves received out-of-band data inline */ case SO_REUSEADDR: /* Allow reuse of local addresses */ { int setting; /* Verify that option is the size of an 'int'. Should also check * that 'value' is properly aligned for an 'int' */ if (value_len != sizeof(int)) { return -EINVAL; } /* Get the value. Is the option being set or cleared? */ setting = *(FAR int *)value; /* Lock the network so that we have exclusive access to the socket * options. */ net_lock(); /* Set or clear the option bit */ if (setting) { _SO_SETOPT(psock->s_options, option); } else { _SO_CLROPT(psock->s_options, option); } net_unlock(); } break; #ifdef CONFIG_NET_TCPPROTO_OPTIONS /* Any connection-oriented protocol could potentially support * SO_KEEPALIVE. However, this option is currently only available for * TCP/IP. * * NOTE: SO_KEEPALIVE is not really a socket-level option; it is a * protocol-level option. A given TCP connection may service multiple * sockets (via dup'ing of the socket). There is, however, still only * one connection to be monitored and that is a global attribute across * all of the clones that may use the underlying connection. */ case SO_KEEPALIVE: /* Verifies TCP connections active by enabling the * periodic transmission of probes */ return tcp_setsockopt(psock, option, value, value_len); #endif case SO_RCVTIMEO: case SO_SNDTIMEO: { FAR struct timeval *tv = (FAR struct timeval *)value; socktimeo_t timeo; /* Verify that option is the size of an 'struct timeval'. */ if (tv == NULL || value_len != sizeof(struct timeval)) { return -EINVAL; } /* Get the timeout value. Any microsecond remainder will be * forced to the next larger, whole decisecond value. */ timeo = (socktimeo_t)net_timeval2dsec(tv, TV2DS_CEIL); /* Save the timeout value */ if (option == SO_RCVTIMEO) { psock->s_rcvtimeo = timeo; } else { psock->s_sndtimeo = timeo; } /* Set/clear the corresponding enable/disable bit */ if (timeo) { _SO_CLROPT(psock->s_options, option); } else { _SO_SETOPT(psock->s_options, option); } } break; #ifdef CONFIG_NET_SOLINGER case SO_LINGER: /* Lingers on a close() if data is present */ { FAR struct linger *setting; /* Verify that option is at least the size of an 'struct linger'. */ if (value_len < sizeof(FAR struct linger)) { return -EINVAL; } /* Get the value. Is the option being set or cleared? */ setting = (FAR struct linger *)value; /* Lock the network so that we have exclusive access to the socket * options. */ net_lock(); /* Set or clear the linger option bit and linger time * (in deciseconds) */ if (setting->l_onoff) { _SO_SETOPT(psock->s_options, option); psock->s_linger = 10 * setting->l_linger; } else { _SO_CLROPT(psock->s_options, option); psock->s_linger = 0; } net_unlock(); } break; #endif #ifdef CONFIG_NET_TIMESTAMP case SO_TIMESTAMP: /* Generates a timestamp for each incoming packet */ { /* Verify that option is at least the size of an integer. */ if (value_len < sizeof(FAR int32_t)) { return -EINVAL; } /* Lock the network so that we have exclusive access to the socket * options. */ net_lock(); psock->s_timestamp = *((FAR int32_t *)value); net_unlock(); } break; #endif /* The following are not yet implemented */ case SO_RCVBUF: /* Sets receive buffer size */ case SO_RCVLOWAT: /* Sets the minimum number of bytes to input */ case SO_SNDBUF: /* Sets send buffer size */ case SO_SNDLOWAT: /* Sets the minimum number of bytes to output */ /* There options are only valid when used with getopt */ case SO_ACCEPTCONN: /* Reports whether socket listening is enabled */ case SO_ERROR: /* Reports and clears error status. */ case SO_TYPE: /* Reports the socket type */ default: return -ENOPROTOOPT; } return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: psock_setsockopt * * Description: * psock_setsockopt() sets the option specified by the 'option' argument, * at the protocol level specified by the 'level' argument, to the value * pointed to by the 'value' argument for the socket specified by the * 'psock' argument. * * The 'level' argument specifies the protocol level of the option. To set * options at the socket level, specify the level argument as SOL_SOCKET. * * See a complete list of values for the socket level * 'option' argument. * * Protocol level options, such as SOL_TCP, are defined in * protocol-specific header files, for example include/netinet/tcp.h * * Input Parameters: * psock Socket structure of socket to operate on * level Protocol level to set the option * option identifies the option to set * value Points to the argument value * value_len The length of the argument value * * Returned Value: * Returns zero (OK) on success. On failure, it returns a negated errno * value to indicate the nature of the error: * * EDOM * The send and receive timeout values are too big to fit into the * timeout fields in the socket structure. * EINVAL * The specified option is invalid at the specified socket 'level' or the * socket has been shut down. * EISCONN * The socket is already connected, and a specified option cannot be set * while the socket is connected. * ENOPROTOOPT * The 'option' is not supported by the protocol. * ENOTSOCK * The 'sockfd' argument does not refer to a socket. * ENOMEM * There was insufficient memory available for the operation to complete. * ENOBUFS * Insufficient resources are available in the system to complete the * call. * ****************************************************************************/ int psock_setsockopt(FAR struct socket *psock, int level, int option, FAR const void *value, socklen_t value_len) { int ret; /* Verify that the sockfd corresponds to valid, allocated socket */ if (psock == NULL || psock->s_crefs <= 0) { return -EBADF; } /* Handle setting of the socket option according to the level at which * option should be applied. */ switch (level) { case SOL_SOCKET: /* Socket-level options (see include/sys/socket.h) */ ret = psock_socketlevel_option(psock, option, value, value_len); break; case IPPROTO_TCP:/* TCP protocol socket options (see include/netinet/tcp.h) */ #ifdef CONFIG_NET_TCPPROTO_OPTIONS ret = tcp_setsockopt(psock, option, value, value_len); break; #endif case IPPROTO_UDP:/* UDP protocol socket options (see include/netinet/udp.h) */ #ifdef CONFIG_NET_UDPPROTO_OPTIONS ret = udp_setsockopt(psock, option, value, value_len); break; #endif #ifdef CONFIG_NET_IPv4 case IPPROTO_IP:/* TCP protocol socket options (see include/netinet/in.h) */ ret = ipv4_setsockopt(psock, option, value, value_len); break; #endif #ifdef CONFIG_NET_IPv6 case IPPROTO_IPV6:/* TCP protocol socket options (see include/netinet/in.h) */ ret = ipv6_setsockopt(psock, option, value, value_len); break; #endif #ifdef CONFIG_NET_CANPROTO_OPTIONS case SOL_CAN_RAW: /* CAN protocol socket options (see include/netpacket/can.h) */ ret = can_setsockopt(psock, option, value, value_len); break; #endif default: /* The provided level is invalid */ ret = -EINVAL; break; } return ret; } /**************************************************************************** * Name: setsockopt * * Description: * setsockopt() sets the option specified by the 'option' argument, * at the protocol level specified by the 'level' argument, to the value * pointed to by the 'value' argument for the socket associated with the * file descriptor specified by the 'sockfd' argument. * * The 'level' argument specifies the protocol level of the option. To set * options at the socket level, specify the level argument as SOL_SOCKET. * * See a complete list of values for the socket level * 'option' argument. * * Protocol level options, such as SOL_TCP, are defined in * protocol-specific header files, for example include/netinet/tcp.h * * Input Parameters: * sockfd Socket descriptor of socket * level Protocol level to set the option * option identifies the option to set * value Points to the argument value * value_len The length of the argument value * * Returned Value: * 0 on success; -1 on failure * * EBADF * The 'sockfd' argument is not a valid socket descriptor. * EDOM * The send and receive timeout values are too big to fit into the * timeout fields in the socket structure. * EINVAL * The specified option is invalid at the specified socket 'level' or the * socket has been shut down. * EISCONN * The socket is already connected, and a specified option cannot be set * while the socket is connected. * ENOPROTOOPT * The 'option' is not supported by the protocol. * ENOTSOCK * The 'sockfd' argument does not refer to a socket. * ENOMEM * There was insufficient memory available for the operation to complete. * ENOBUFS * Insufficient resources are available in the system to complete the * call. * ****************************************************************************/ int setsockopt(int sockfd, int level, int option, const void *value, socklen_t value_len) { FAR struct socket *psock; int ret; /* Get the underlying socket structure */ psock = sockfd_socket(sockfd); /* Then let psock_setockopt() do all of the work */ ret = psock_setsockopt(psock, level, option, value, value_len); if (ret < 0) { set_errno(-ret); return ERROR; } return OK; } #endif /* CONFIG_NET && CONFIG_NET_SOCKOPTS */