/************************************************************************************ * arch/arm/src/stm32/stm32_pwm.h * * Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved. * Copyright (C) 2015 Omni Hoverboards Inc. All rights reserved. * Authors: Gregory Nutt * Paul Alexander Patience * Mateusz Szafoni * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_ARM_SRC_STM32_STM32_PWM_H #define __ARCH_ARM_SRC_STM32_STM32_PWM_H /* The STM32 does not have dedicated PWM hardware. Rather, pulsed output control * is a capabilitiy of the STM32 timers. The logic in this file implements the * lower half of the standard, NuttX PWM interface using the STM32 timers. That * interface is described in include/nuttx/drivers/pwm.h. */ /************************************************************************************ * Included Files ************************************************************************************/ #include #include "chip.h" /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* Configuration ********************************************************************/ /* Timer devices may be used for different purposes. One special purpose is * to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn * is defined then the CONFIG_STM32_TIMn_PWM must also be defined to indicate that * timer "n" is intended to be used for pulsed output signal generation. */ #ifndef CONFIG_STM32_TIM1 # undef CONFIG_STM32_TIM1_PWM #endif #ifndef CONFIG_STM32_TIM2 # undef CONFIG_STM32_TIM2_PWM #endif #ifndef CONFIG_STM32_TIM3 # undef CONFIG_STM32_TIM3_PWM #endif #ifndef CONFIG_STM32_TIM4 # undef CONFIG_STM32_TIM4_PWM #endif #ifndef CONFIG_STM32_TIM5 # undef CONFIG_STM32_TIM5_PWM #endif #ifndef CONFIG_STM32_TIM8 # undef CONFIG_STM32_TIM8_PWM #endif #ifndef CONFIG_STM32_TIM9 # undef CONFIG_STM32_TIM9_PWM #endif #ifndef CONFIG_STM32_TIM10 # undef CONFIG_STM32_TIM10_PWM #endif #ifndef CONFIG_STM32_TIM11 # undef CONFIG_STM32_TIM11_PWM #endif #ifndef CONFIG_STM32_TIM12 # undef CONFIG_STM32_TIM12_PWM #endif #ifndef CONFIG_STM32_TIM13 # undef CONFIG_STM32_TIM13_PWM #endif #ifndef CONFIG_STM32_TIM14 # undef CONFIG_STM32_TIM14_PWM #endif #ifndef CONFIG_STM32_TIM15 # undef CONFIG_STM32_TIM15_PWM #endif #ifndef CONFIG_STM32_TIM16 # undef CONFIG_STM32_TIM16_PWM #endif #ifndef CONFIG_STM32_TIM17 # undef CONFIG_STM32_TIM17_PWM #endif /* The basic timers (timer 6 and 7) are not capable of generating output pulses */ #undef CONFIG_STM32_TIM6_PWM #undef CONFIG_STM32_TIM7_PWM /* Check if PWM support for any channel is enabled. */ #if defined(CONFIG_STM32_TIM1_PWM) || defined(CONFIG_STM32_TIM2_PWM) || \ defined(CONFIG_STM32_TIM3_PWM) || defined(CONFIG_STM32_TIM4_PWM) || \ defined(CONFIG_STM32_TIM5_PWM) || defined(CONFIG_STM32_TIM8_PWM) || \ defined(CONFIG_STM32_TIM9_PWM) || defined(CONFIG_STM32_TIM10_PWM) || \ defined(CONFIG_STM32_TIM11_PWM) || defined(CONFIG_STM32_TIM12_PWM) || \ defined(CONFIG_STM32_TIM13_PWM) || defined(CONFIG_STM32_TIM14_PWM) || \ defined(CONFIG_STM32_TIM15_PWM) || defined(CONFIG_STM32_TIM16_PWM) || \ defined(CONFIG_STM32_TIM17_PWM) #include #include "chip/stm32_tim.h" #ifdef CONFIG_STM32_PWM_MULTICHAN # ifndef CONFIG_PWM_MULTICHAN # error CONFIG_STM32_PWM_MULTICHAN enabled but CONFIG_PWM_MULTICHAN not set! # endif #endif #ifdef CONFIG_PWM_MULTICHAN #ifdef CONFIG_STM32_TIM1_CHANNEL1 # define PWM_TIM1_CHANNEL1 1 #else # define PWM_TIM1_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM1_CHANNEL2 # define PWM_TIM1_CHANNEL2 1 #else # define PWM_TIM1_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM1_CHANNEL3 # define PWM_TIM1_CHANNEL3 1 #else # define PWM_TIM1_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM1_CHANNEL4 # define PWM_TIM1_CHANNEL4 1 #else # define PWM_TIM1_CHANNEL4 0 #endif #define PWM_TIM1_NCHANNELS (PWM_TIM1_CHANNEL1 + PWM_TIM1_CHANNEL2 + \ PWM_TIM1_CHANNEL3 + PWM_TIM1_CHANNEL4) #ifdef CONFIG_STM32_TIM2_CHANNEL1 # define PWM_TIM2_CHANNEL1 1 #else # define PWM_TIM2_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM2_CHANNEL2 # define PWM_TIM2_CHANNEL2 1 #else # define PWM_TIM2_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM2_CHANNEL3 # define PWM_TIM2_CHANNEL3 1 #else # define PWM_TIM2_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM2_CHANNEL4 # define PWM_TIM2_CHANNEL4 1 #else # define PWM_TIM2_CHANNEL4 0 #endif #define PWM_TIM2_NCHANNELS (PWM_TIM2_CHANNEL1 + PWM_TIM2_CHANNEL2 + \ PWM_TIM2_CHANNEL3 + PWM_TIM2_CHANNEL4) #ifdef CONFIG_STM32_TIM3_CHANNEL1 # define PWM_TIM3_CHANNEL1 1 #else # define PWM_TIM3_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM3_CHANNEL2 # define PWM_TIM3_CHANNEL2 1 #else # define PWM_TIM3_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM3_CHANNEL3 # define PWM_TIM3_CHANNEL3 1 #else # define PWM_TIM3_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM3_CHANNEL4 # define PWM_TIM3_CHANNEL4 1 #else # define PWM_TIM3_CHANNEL4 0 #endif #define PWM_TIM3_NCHANNELS (PWM_TIM3_CHANNEL1 + PWM_TIM3_CHANNEL2 + \ PWM_TIM3_CHANNEL3 + PWM_TIM3_CHANNEL4) #ifdef CONFIG_STM32_TIM4_CHANNEL1 # define PWM_TIM4_CHANNEL1 1 #else # define PWM_TIM4_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM4_CHANNEL2 # define PWM_TIM4_CHANNEL2 1 #else # define PWM_TIM4_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM4_CHANNEL3 # define PWM_TIM4_CHANNEL3 1 #else # define PWM_TIM4_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM4_CHANNEL4 # define PWM_TIM4_CHANNEL4 1 #else # define PWM_TIM4_CHANNEL4 0 #endif #define PWM_TIM4_NCHANNELS (PWM_TIM4_CHANNEL1 + PWM_TIM4_CHANNEL2 + \ PWM_TIM4_CHANNEL3 + PWM_TIM4_CHANNEL4) #ifdef CONFIG_STM32_TIM5_CHANNEL1 # define PWM_TIM5_CHANNEL1 1 #else # define PWM_TIM5_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM5_CHANNEL2 # define PWM_TIM5_CHANNEL2 1 #else # define PWM_TIM5_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM5_CHANNEL3 # define PWM_TIM5_CHANNEL3 1 #else # define PWM_TIM5_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM5_CHANNEL4 # define PWM_TIM5_CHANNEL4 1 #else # define PWM_TIM5_CHANNEL4 0 #endif #define PWM_TIM5_NCHANNELS (PWM_TIM5_CHANNEL1 + PWM_TIM5_CHANNEL2 + \ PWM_TIM5_CHANNEL3 + PWM_TIM5_CHANNEL4) #ifdef CONFIG_STM32_TIM8_CHANNEL1 # define PWM_TIM8_CHANNEL1 1 #else # define PWM_TIM8_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM8_CHANNEL2 # define PWM_TIM8_CHANNEL2 1 #else # define PWM_TIM8_CHANNEL2 0 #endif #ifdef CONFIG_STM32_TIM8_CHANNEL3 # define PWM_TIM8_CHANNEL3 1 #else # define PWM_TIM8_CHANNEL3 0 #endif #ifdef CONFIG_STM32_TIM8_CHANNEL4 # define PWM_TIM8_CHANNEL4 1 #else # define PWM_TIM8_CHANNEL4 0 #endif #define PWM_TIM8_NCHANNELS (PWM_TIM8_CHANNEL1 + PWM_TIM8_CHANNEL2 + \ PWM_TIM8_CHANNEL3 + PWM_TIM8_CHANNEL4) #ifdef CONFIG_STM32_TIM9_CHANNEL1 # define PWM_TIM9_CHANNEL1 1 #else # define PWM_TIM9_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM9_CHANNEL2 # define PWM_TIM9_CHANNEL2 1 #else # define PWM_TIM9_CHANNEL2 0 #endif #define PWM_TIM9_NCHANNELS (PWM_TIM9_CHANNEL1 + PWM_TIM9_CHANNEL2) #ifdef CONFIG_STM32_TIM10_CHANNEL1 # define PWM_TIM10_CHANNEL1 1 #else # define PWM_TIM10_CHANNEL1 0 #endif #define PWM_TIM10_NCHANNELS (PWM_TIM10_CHANNEL1) #ifdef CONFIG_STM32_TIM11_CHANNEL1 # define PWM_TIM11_CHANNEL1 1 #else # define PWM_TIM11_CHANNEL1 0 #endif #define PWM_TIM11_NCHANNELS (PWM_TIM11_CHANNEL1) #ifdef CONFIG_STM32_TIM12_CHANNEL1 # define PWM_TIM12_CHANNEL1 1 #else # define PWM_TIM12_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM12_CHANNEL2 # define PWM_TIM12_CHANNEL2 1 #else # define PWM_TIM12_CHANNEL2 0 #endif #define PWM_TIM12_NCHANNELS (PWM_TIM12_CHANNEL1 + PWM_TIM12_CHANNEL2) #ifdef CONFIG_STM32_TIM13_CHANNEL1 # define PWM_TIM13_CHANNEL1 1 #else # define PWM_TIM13_CHANNEL1 0 #endif #define PWM_TIM13_NCHANNELS (PWM_TIM13_CHANNEL1) #ifdef CONFIG_STM32_TIM14_CHANNEL1 # define PWM_TIM14_CHANNEL1 1 #else # define PWM_TIM14_CHANNEL1 0 #endif #define PWM_TIM14_NCHANNELS (PWM_TIM14_CHANNEL1) #ifdef CONFIG_STM32_TIM15_CHANNEL1 # define PWM_TIM15_CHANNEL1 1 #else # define PWM_TIM15_CHANNEL1 0 #endif #ifdef CONFIG_STM32_TIM15_CHANNEL2 # define PWM_TIM15_CHANNEL2 1 #else # define PWM_TIM15_CHANNEL2 0 #endif #define PWM_TIM15_NCHANNELS (PWM_TIM15_CHANNEL1 + PWM_TIM15_CHANNEL2) #ifdef CONFIG_STM32_TIM16_CHANNEL1 # define PWM_TIM16_CHANNEL1 1 #else # define PWM_TIM16_CHANNEL1 0 #endif #define PWM_TIM16_NCHANNELS PWM_TIM16_CHANNEL1 #ifdef CONFIG_STM32_TIM17_CHANNEL1 # define PWM_TIM17_CHANNEL1 1 #else # define PWM_TIM17_CHANNEL1 0 #endif #define PWM_TIM17_NCHANNELS PWM_TIM17_CHANNEL1 #else /* !CONFIG_PWM_MULTICHAN */ /* For each timer that is enabled for PWM usage, we need the following additional * configuration settings: * * CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} * PWM_TIMx_CHn - One of the values defined in chip/stm32*_pinmap.h. In the case * where there are multiple pin selections, the correct setting must be provided * in the arch/board/board.h file. * * NOTE: The STM32 timers are each capable of generating different signals on * each of the four channels with different duty cycles. That capability is * not supported by this driver: Only one output channel per timer. */ #ifdef CONFIG_STM32_TIM1_PWM # if !defined(CONFIG_STM32_TIM1_CHANNEL) # error "CONFIG_STM32_TIM1_CHANNEL must be provided" # elif CONFIG_STM32_TIM1_CHANNEL == 1 # define CONFIG_STM32_TIM1_CHANNEL1 1 # define CONFIG_STM32_TIM1_CH1MODE CONFIG_STM32_TIM1_CHMODE # elif CONFIG_STM32_TIM1_CHANNEL == 2 # define CONFIG_STM32_TIM1_CHANNEL2 1 # define CONFIG_STM32_TIM1_CH2MODE CONFIG_STM32_TIM1_CHMODE # elif CONFIG_STM32_TIM1_CHANNEL == 3 # define CONFIG_STM32_TIM1_CHANNEL3 1 # define CONFIG_STM32_TIM1_CH3MODE CONFIG_STM32_TIM1_CHMODE # elif CONFIG_STM32_TIM1_CHANNEL == 4 # define CONFIG_STM32_TIM1_CHANNEL4 1 # define CONFIG_STM32_TIM1_CH4MODE CONFIG_STM32_TIM1_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM1_CHANNEL" # endif # define PWM_TIM1_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM2_PWM # if !defined(CONFIG_STM32_TIM2_CHANNEL) # error "CONFIG_STM32_TIM2_CHANNEL must be provided" # elif CONFIG_STM32_TIM2_CHANNEL == 1 # define CONFIG_STM32_TIM2_CHANNEL1 1 # define CONFIG_STM32_TIM2_CH1MODE CONFIG_STM32_TIM2_CHMODE # elif CONFIG_STM32_TIM2_CHANNEL == 2 # define CONFIG_STM32_TIM2_CHANNEL2 1 # define CONFIG_STM32_TIM2_CH2MODE CONFIG_STM32_TIM2_CHMODE # elif CONFIG_STM32_TIM2_CHANNEL == 3 # define CONFIG_STM32_TIM2_CHANNEL3 1 # define CONFIG_STM32_TIM2_CH3MODE CONFIG_STM32_TIM2_CHMODE # elif CONFIG_STM32_TIM2_CHANNEL == 4 # define CONFIG_STM32_TIM2_CHANNEL4 1 # define CONFIG_STM32_TIM2_CH4MODE CONFIG_STM32_TIM2_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM2_CHANNEL" # endif # define PWM_TIM2_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM3_PWM # if !defined(CONFIG_STM32_TIM3_CHANNEL) # error "CONFIG_STM32_TIM3_CHANNEL must be provided" # elif CONFIG_STM32_TIM3_CHANNEL == 1 # define CONFIG_STM32_TIM3_CHANNEL1 1 # define CONFIG_STM32_TIM3_CH1MODE CONFIG_STM32_TIM3_CHMODE # elif CONFIG_STM32_TIM3_CHANNEL == 2 # define CONFIG_STM32_TIM3_CHANNEL2 1 # define CONFIG_STM32_TIM3_CH2MODE CONFIG_STM32_TIM3_CHMODE # elif CONFIG_STM32_TIM3_CHANNEL == 3 # define CONFIG_STM32_TIM3_CHANNEL3 1 # define CONFIG_STM32_TIM3_CH3MODE CONFIG_STM32_TIM3_CHMODE # elif CONFIG_STM32_TIM3_CHANNEL == 4 # define CONFIG_STM32_TIM3_CHANNEL4 1 # define CONFIG_STM32_TIM3_CH4MODE CONFIG_STM32_TIM3_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM3_CHANNEL" # endif # define PWM_TIM3_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM4_PWM # if !defined(CONFIG_STM32_TIM4_CHANNEL) # error "CONFIG_STM32_TIM4_CHANNEL must be provided" # elif CONFIG_STM32_TIM4_CHANNEL == 1 # define CONFIG_STM32_TIM4_CHANNEL1 1 # define CONFIG_STM32_TIM4_CH1MODE CONFIG_STM32_TIM4_CHMODE # elif CONFIG_STM32_TIM4_CHANNEL == 2 # define CONFIG_STM32_TIM4_CHANNEL2 1 # define CONFIG_STM32_TIM4_CH2MODE CONFIG_STM32_TIM4_CHMODE # elif CONFIG_STM32_TIM4_CHANNEL == 3 # define CONFIG_STM32_TIM4_CHANNEL3 1 # define CONFIG_STM32_TIM4_CH3MODE CONFIG_STM32_TIM4_CHMODE # elif CONFIG_STM32_TIM4_CHANNEL == 4 # define CONFIG_STM32_TIM4_CHANNEL4 1 # define CONFIG_STM32_TIM4_CH4MODE CONFIG_STM32_TIM4_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM4_CHANNEL" # endif # define PWM_TIM4_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM5_PWM # if !defined(CONFIG_STM32_TIM5_CHANNEL) # error "CONFIG_STM32_TIM5_CHANNEL must be provided" # elif CONFIG_STM32_TIM5_CHANNEL == 1 # define CONFIG_STM32_TIM5_CHANNEL1 1 # define CONFIG_STM32_TIM5_CH1MODE CONFIG_STM32_TIM5_CHMODE # elif CONFIG_STM32_TIM5_CHANNEL == 2 # define CONFIG_STM32_TIM5_CHANNEL2 1 # define CONFIG_STM32_TIM5_CH2MODE CONFIG_STM32_TIM5_CHMODE # elif CONFIG_STM32_TIM5_CHANNEL == 3 # define CONFIG_STM32_TIM5_CHANNEL3 1 # define CONFIG_STM32_TIM5_CH3MODE CONFIG_STM32_TIM5_CHMODE # elif CONFIG_STM32_TIM5_CHANNEL == 4 # define CONFIG_STM32_TIM5_CHANNEL4 1 # define CONFIG_STM32_TIM5_CH4MODE CONFIG_STM32_TIM5_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM5_CHANNEL" # endif # define PWM_TIM5_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM8_PWM # if !defined(CONFIG_STM32_TIM8_CHANNEL) # error "CONFIG_STM32_TIM8_CHANNEL must be provided" # elif CONFIG_STM32_TIM8_CHANNEL == 1 # define CONFIG_STM32_TIM8_CHANNEL1 1 # define CONFIG_STM32_TIM8_CH1MODE CONFIG_STM32_TIM8_CHMODE # elif CONFIG_STM32_TIM8_CHANNEL == 2 # define CONFIG_STM32_TIM8_CHANNEL2 1 # define CONFIG_STM32_TIM8_CH2MODE CONFIG_STM32_TIM8_CHMODE # elif CONFIG_STM32_TIM8_CHANNEL == 3 # define CONFIG_STM32_TIM8_CHANNEL3 1 # define CONFIG_STM32_TIM8_CH3MODE CONFIG_STM32_TIM8_CHMODE # elif CONFIG_STM32_TIM8_CHANNEL == 4 # define CONFIG_STM32_TIM8_CHANNEL4 1 # define CONFIG_STM32_TIM8_CH4MODE CONFIG_STM32_TIM8_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM8_CHANNEL" # endif # define PWM_TIM8_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM9_PWM # if !defined(CONFIG_STM32_TIM9_CHANNEL) # error "CONFIG_STM32_TIM9_CHANNEL must be provided" # elif CONFIG_STM32_TIM9_CHANNEL == 1 # define CONFIG_STM32_TIM9_CHANNEL1 1 # define CONFIG_STM32_TIM9_CH1MODE CONFIG_STM32_TIM9_CHMODE # elif CONFIG_STM32_TIM9_CHANNEL == 2 # define CONFIG_STM32_TIM9_CHANNEL2 1 # define CONFIG_STM32_TIM9_CH2MODE CONFIG_STM32_TIM9_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM9_CHANNEL" # endif # define PWM_TIM9_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM10_PWM # if !defined(CONFIG_STM32_TIM10_CHANNEL) # error "CONFIG_STM32_TIM10_CHANNEL must be provided" # elif CONFIG_STM32_TIM10_CHANNEL == 1 # define CONFIG_STM32_TIM10_CHANNEL1 1 # define CONFIG_STM32_TIM10_CH1MODE CONFIG_STM32_TIM10_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM10_CHANNEL" # endif # define PWM_TIM10_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM11_PWM # if !defined(CONFIG_STM32_TIM11_CHANNEL) # error "CONFIG_STM32_TIM11_CHANNEL must be provided" # elif CONFIG_STM32_TIM11_CHANNEL == 1 # define CONFIG_STM32_TIM11_CHANNEL1 1 # define CONFIG_STM32_TIM11_CH1MODE CONFIG_STM32_TIM11_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM11_CHANNEL" # endif # define PWM_TIM11_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM12_PWM # if !defined(CONFIG_STM32_TIM12_CHANNEL) # error "CONFIG_STM32_TIM12_CHANNEL must be provided" # elif CONFIG_STM32_TIM12_CHANNEL == 1 # define CONFIG_STM32_TIM12_CHANNEL1 1 # define CONFIG_STM32_TIM12_CH1MODE CONFIG_STM32_TIM12_CHMODE # elif CONFIG_STM32_TIM12_CHANNEL == 2 # define CONFIG_STM32_TIM12_CHANNEL2 1 # define CONFIG_STM32_TIM12_CH2MODE CONFIG_STM32_TIM12_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM12_CHANNEL" # endif # define PWM_TIM12_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM13_PWM # if !defined(CONFIG_STM32_TIM13_CHANNEL) # error "CONFIG_STM32_TIM13_CHANNEL must be provided" # elif CONFIG_STM32_TIM13_CHANNEL == 1 # define CONFIG_STM32_TIM13_CHANNEL1 1 # define CONFIG_STM32_TIM13_CH1MODE CONFIG_STM32_TIM13_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM13_CHANNEL" # endif # define PWM_TIM13_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM14_PWM # if !defined(CONFIG_STM32_TIM14_CHANNEL) # error "CONFIG_STM32_TIM14_CHANNEL must be provided" # elif CONFIG_STM32_TIM14_CHANNEL == 1 # define CONFIG_STM32_TIM14_CHANNEL1 1 # define CONFIG_STM32_TIM14_CH1MODE CONFIG_STM32_TIM14_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM14_CHANNEL" # endif # define PWM_TIM14_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM15_PWM # if !defined(CONFIG_STM32_TIM15_CHANNEL) # error "CONFIG_STM32_TIM15_CHANNEL must be provided" # elif CONFIG_STM32_TIM15_CHANNEL == 1 # define CONFIG_STM32_TIM15_CHANNEL1 1 # define CONFIG_STM32_TIM15_CH1MODE CONFIG_STM32_TIM15_CHMODE # elif CONFIG_STM32_TIM15_CHANNEL == 2 # define CONFIG_STM32_TIM15_CHANNEL2 1 # define CONFIG_STM32_TIM15_CH2MODE CONFIG_STM32_TIM15_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM15_CHANNEL" # endif # define PWM_TIM15_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM16_PWM # if !defined(CONFIG_STM32_TIM16_CHANNEL) # error "CONFIG_STM32_TIM16_CHANNEL must be provided" # elif CONFIG_STM32_TIM16_CHANNEL == 1 # define CONFIG_STM32_TIM16_CHANNEL1 1 # define CONFIG_STM32_TIM16_CH1MODE CONFIG_STM32_TIM16_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM16_CHANNEL" # endif # define PWM_TIM16_NCHANNELS 1 #endif #ifdef CONFIG_STM32_TIM17_PWM # if !defined(CONFIG_STM32_TIM17_CHANNEL) # error "CONFIG_STM32_TIM17_CHANNEL must be provided" # elif CONFIG_STM32_TIM17_CHANNEL == 1 # define CONFIG_STM32_TIM17_CHANNEL1 1 # define CONFIG_STM32_TIM17_CH1MODE CONFIG_STM32_TIM17_CHMODE # else # error "Unsupported value of CONFIG_STM32_TIM17_CHANNEL" # endif # define PWM_TIM17_NCHANNELS 1 #endif #endif /* CONFIG_PWM_MULTICHAN */ #ifdef CONFIG_STM32_TIM1_CH1OUT # define PWM_TIM1_CH1CFG GPIO_TIM1_CH1OUT #else # define PWM_TIM1_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH1NOUT # define PWM_TIM1_CH1NCFG GPIO_TIM1_CH1NOUT #else # define PWM_TIM1_CH1NCFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH2OUT # define PWM_TIM1_CH2CFG GPIO_TIM1_CH2OUT #else # define PWM_TIM1_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH2NOUT # define PWM_TIM1_CH2NCFG GPIO_TIM1_CH2NOUT #else # define PWM_TIM1_CH2NCFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH3OUT # define PWM_TIM1_CH3CFG GPIO_TIM1_CH3OUT #else # define PWM_TIM1_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH3NOUT # define PWM_TIM1_CH3NCFG GPIO_TIM1_CH3NOUT #else # define PWM_TIM1_CH3NCFG 0 #endif #ifdef CONFIG_STM32_TIM1_CH4OUT # define PWM_TIM1_CH4CFG GPIO_TIM1_CH4OUT #else # define PWM_TIM1_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM2_CH1OUT # define PWM_TIM2_CH1CFG GPIO_TIM2_CH1OUT #else # define PWM_TIM2_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM2_CH2OUT # define PWM_TIM2_CH2CFG GPIO_TIM2_CH2OUT #else # define PWM_TIM2_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM2_CH3OUT # define PWM_TIM2_CH3CFG GPIO_TIM2_CH3OUT #else # define PWM_TIM2_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM2_CH4OUT # define PWM_TIM2_CH4CFG GPIO_TIM2_CH4OUT #else # define PWM_TIM2_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM3_CH1OUT # define PWM_TIM3_CH1CFG GPIO_TIM3_CH1OUT #else # define PWM_TIM3_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM3_CH2OUT # define PWM_TIM3_CH2CFG GPIO_TIM3_CH2OUT #else # define PWM_TIM3_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM3_CH3OUT # define PWM_TIM3_CH3CFG GPIO_TIM3_CH3OUT #else # define PWM_TIM3_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM3_CH4OUT # define PWM_TIM3_CH4CFG GPIO_TIM3_CH4OUT #else # define PWM_TIM3_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM4_CH1OUT # define PWM_TIM4_CH1CFG GPIO_TIM4_CH1OUT #else # define PWM_TIM4_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM4_CH2OUT # define PWM_TIM4_CH2CFG GPIO_TIM4_CH2OUT #else # define PWM_TIM4_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM4_CH3OUT # define PWM_TIM4_CH3CFG GPIO_TIM4_CH3OUT #else # define PWM_TIM4_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM4_CH4OUT # define PWM_TIM4_CH4CFG GPIO_TIM4_CH4OUT #else # define PWM_TIM4_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM5_CH1OUT # define PWM_TIM5_CH1CFG GPIO_TIM5_CH1OUT #else # define PWM_TIM5_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM5_CH2OUT # define PWM_TIM5_CH2CFG GPIO_TIM5_CH2OUT #else # define PWM_TIM5_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM5_CH3OUT # define PWM_TIM5_CH3CFG GPIO_TIM5_CH3OUT #else # define PWM_TIM5_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM5_CH4OUT # define PWM_TIM5_CH4CFG GPIO_TIM5_CH4OUT #else # define PWM_TIM5_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH1OUT # define PWM_TIM8_CH1CFG GPIO_TIM8_CH1OUT #else # define PWM_TIM8_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH1NOUT # define PWM_TIM8_CH1NCFG GPIO_TIM8_CH1NOUT #else # define PWM_TIM8_CH1NCFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH2OUT # define PWM_TIM8_CH2CFG GPIO_TIM8_CH2OUT #else # define PWM_TIM8_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH2NOUT # define PWM_TIM8_CH2NCFG GPIO_TIM8_CH2NOUT #else # define PWM_TIM8_CH2NCFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH3OUT # define PWM_TIM8_CH3CFG GPIO_TIM8_CH3OUT #else # define PWM_TIM8_CH3CFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH3NOUT # define PWM_TIM8_CH3NCFG GPIO_TIM8_CH3NOUT #else # define PWM_TIM8_CH3NCFG 0 #endif #ifdef CONFIG_STM32_TIM8_CH4OUT # define PWM_TIM8_CH4CFG GPIO_TIM8_CH4OUT #else # define PWM_TIM8_CH4CFG 0 #endif #ifdef CONFIG_STM32_TIM9_CH1OUT # define PWM_TIM9_CH1CFG GPIO_TIM9_CH1OUT #else # define PWM_TIM9_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM9_CH2OUT # define PWM_TIM9_CH2CFG GPIO_TIM9_CH2OUT #else # define PWM_TIM9_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM10_CH1OUT # define PWM_TIM10_CH1CFG GPIO_TIM10_CH1OUT #else # define PWM_TIM10_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM11_CH1OUT # define PWM_TIM11_CH1CFG GPIO_TIM11_CH1OUT #else # define PWM_TIM11_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM12_CH1OUT # define PWM_TIM12_CH1CFG GPIO_TIM12_CH1OUT #else # define PWM_TIM12_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM12_CH2OUT # define PWM_TIM12_CH2CFG GPIO_TIM12_CH2OUT #else # define PWM_TIM12_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM13_CH1OUT # define PWM_TIM13_CH1CFG GPIO_TIM13_CH1OUT #else # define PWM_TIM13_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM14_CH1OUT # define PWM_TIM14_CH1CFG GPIO_TIM14_CH1OUT #else # define PWM_TIM14_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM15_CH1OUT # define PWM_TIM15_CH1CFG GPIO_TIM15_CH1OUT #else # define PWM_TIM15_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM15_CH1NOUT # define PWM_TIM15_CH1NCFG GPIO_TIM15_CH1NOUT #else # define PWM_TIM15_CH1NCFG 0 #endif #ifdef CONFIG_STM32_TIM15_CH2OUT # define PWM_TIM15_CH2CFG GPIO_TIM15_CH2OUT #else # define PWM_TIM15_CH2CFG 0 #endif #ifdef CONFIG_STM32_TIM16_CH1OUT # define PWM_TIM16_CH1CFG GPIO_TIM16_CH1OUT #else # define PWM_TIM16_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM16_CH1NOUT # define PWM_TIM16_CH1NCFG GPIO_TIM16_CH1NOUT #else # define PWM_TIM16_CH1NCFG 0 #endif #ifdef CONFIG_STM32_TIM17_CH1OUT # define PWM_TIM17_CH1CFG GPIO_TIM17_CH1OUT #else # define PWM_TIM17_CH1CFG 0 #endif #ifdef CONFIG_STM32_TIM17_CH1NOUT # define PWM_TIM17_CH1NCFG GPIO_TIM17_CH1NOUT #else # define PWM_TIM17_CH1NCFG 0 #endif /* Low-level ops helpers ************************************************************/ /* NOTE: low-level ops accept pwm_lowerhalf_s as first argument, but llops access * can be found in stm32_pwm_dev_s */ #define PWM_SETUP(dev) \ (dev)->ops->setup((FAR struct pwm_lowerhalf_s *)dev) #define PWM_SHUTDOWN(dev) \ (dev)->ops->shutdown((FAR struct pwm_lowerhalf_s *)dev) #define PWM_CCR_UPDATE(dev, index, ccr) \ (dev)->llops->ccr_update((FAR struct pwm_lowerhalf_s *)dev, index, ccr) #define PWM_CCR_GET(dev, index) \ (dev)->llops->ccr_get((FAR struct pwm_lowerhalf_s *)dev, index) #define PWM_ARR_UPDATE(dev, arr) \ (dev)->llops->arr_update((FAR struct pwm_lowerhalf_s *)dev, arr) #define PWM_ARR_GET(dev) \ (dev)->llops->arr_get((FAR struct pwm_lowerhalf_s *)dev) #define PWM_OUTPUTS_ENABLE(dev, out, state) \ (dev)->llops->outputs_enable((FAR struct pwm_lowerhalf_s *)dev, out, state) #define PWM_SOFT_UPDATE(dev) \ (dev)->llops->soft_update((FAR struct pwm_lowerhalf_s *)dev) #define PWM_CONFIGURE(dev) \ (dev)->llops->configure((FAR struct pwm_lowerhalf_s *)dev) #define PWM_SOFT_BREAK(dev, state) \ (dev)->llops->soft_break((FAR struct pwm_lowerhalf_s *)dev, state) #define PWM_FREQ_UPDATE(dev, freq) \ (dev)->llops->freq_update((FAR struct pwm_lowerhalf_s *)dev, freq) #define PWM_TIM_ENABLE(dev, state) \ (dev)->llops->tim_enable((FAR struct pwm_lowerhalf_s *)dev, state) #define PWM_DUMP_REGS(dev) \ (dev)->llops->dump_regs((FAR struct pwm_lowerhalf_s *)dev) #define PWM_DT_UPDATE(dev, dt) \ (dev)->llops->dt_update((FAR struct pwm_lowerhalf_s *)dev, dt) /************************************************************************************ * Public Types ************************************************************************************/ /* Timer mode */ enum stm32_pwm_tim_mode_e { STM32_TIMMODE_COUNTUP = 0, STM32_TIMMODE_COUNTDOWN = 1, STM32_TIMMODE_CENTER1 = 2, STM32_TIMMODE_CENTER2 = 3, STM32_TIMMODE_CENTER3 = 4, }; /* Timer output polarity */ enum stm32_pwm_pol_e { STM32_POL_POS = 0, STM32_POL_NEG = 1, }; /* Timer output IDLE state */ enum stm32_pwm_idle_e { STM32_IDLE_INACTIVE = 0, STM32_IDLE_ACTIVE = 1 }; /* PWM channel mode */ enum stm32_chan_mode_e { STM32_CHANMODE_PWM1 = 0, STM32_CHANMODE_PWM2 = 1, #ifdef HAVE_IP_TIMERS_V2 STM32_CHANMODE_COMBINED1 = 2, STM32_CHANMODE_COMBINED2 = 3, STM32_CHANMODE_ASYMMETRIC1 = 4, STM32_CHANMODE_ASYMMETRIC2 = 5 #endif }; /* Timer channel */ enum stm32_chan_e { STM32_CHAN1 = (1 << 0), STM32_CHAN1N = (1 << 1), STM32_CHAN2 = (1 << 2), STM32_CHAN2N = (1 << 3), STM32_CHAN3 = (1 << 4), STM32_CHAN3N = (1 << 5), STM32_CHAN4 = (1 << 6), /* No complementary output for CH4 */ #ifdef HAVE_IP_TIMERS_V2 /* Only available inside micro */ STM32_CHAN5 = (1 << 7), /* 1<<8 reserved */ STM32_CHAN6 = (1 << 9), /* 1<<10 reserved */ #endif }; #ifdef CONFIG_STM32_PWM_LL_OPS /* This structure provides the publicly visable representation of the * "lower-half" PWM driver structure. */ struct stm32_pwm_dev_s { /* The first field of this state structure must be a pointer to the PWM * callback structure to be consistent with upper-half PWM driver. */ FAR const struct pwm_ops_s *ops; /* Publicly visible portion of the "lower-half" PWM driver structure */ FAR const struct stm32_pwm_ops_s *llops; /* Require cast-compatibility with private "lower-half" PWM strucutre */ }; /* Low-level operations for PWM */ struct pwm_lowerhalf_s; struct stm32_pwm_ops_s { /* Update CCR register */ int (*ccr_update)(FAR struct pwm_lowerhalf_s *dev, uint8_t index, uint32_t ccr); /* Get CCR register */ uint32_t (*ccr_get)(FAR struct pwm_lowerhalf_s *dev, uint8_t index); /* Update ARR register */ int (*arr_update)(FAR struct pwm_lowerhalf_s *dev, uint32_t arr); /* Get ARR register */ uint32_t (*arr_get)(FAR struct pwm_lowerhalf_s *dev); /* Enable outputs */ int (*outputs_enable)(FAR struct pwm_lowerhalf_s *dev, uint16_t outputs, bool state); /* Software update */ int (*soft_update)(FAR struct pwm_lowerhalf_s *dev); /* PWM configure */ int (*configure)(FAR struct pwm_lowerhalf_s *dev); /* Software break */ int (*soft_break)(FAR struct pwm_lowerhalf_s *dev, bool state); /* Update frequency */ int (*freq_update)(FAR struct pwm_lowerhalf_s *dev, uint32_t frequency); /* Enable timer counter */ int (*tim_enable)(FAR struct pwm_lowerhalf_s *dev, bool state); #ifdef CONFIG_DEBUG_PWM_INFO /* Dump timer registers */ int (*dump_regs)(FAR struct pwm_lowerhalf_s *dev); #endif #ifdef HAVE_COMPLEMENTARY /* Deadtime update */ int (*dt_update)(FAR struct pwm_lowerhalf_s *dev, uint8_t dt); #endif }; #endif /* CONFIG_STM32_PWM_LL_OPS */ /************************************************************************************ * Public Data ************************************************************************************/ #ifndef __ASSEMBLY__ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /************************************************************************************ * Public Functions ************************************************************************************/ /************************************************************************************ * Name: stm32_pwminitialize * * Description: * Initialize one timer for use with the upper_level PWM driver. * * Input Parameters: * timer - A number identifying the timer use. The number of valid timer * IDs varies with the STM32 MCU and MCU family but is somewhere in * the range of {1,..,17}. * * Returned Value: * On success, a pointer to the STM32 lower half PWM driver is returned. * NULL is returned on any failure. * ************************************************************************************/ FAR struct pwm_lowerhalf_s *stm32_pwminitialize(int timer); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __ASSEMBLY__ */ #endif /* CONFIG_STM32_TIMx_PWM */ #endif /* __ARCH_ARM_SRC_STM32_STM32_PWM_H */