/****************************************************************************** * drivers/wireless/spirit/include/spirit_irq.h * * Copyright(c) 2015 STMicroelectronics * Author: VMA division - AMS * Version 3.2.2 08-July-2015 * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************/ #ifndef __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H #define __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H /* On the Spirit side specific IRQs can be enabled by setting a specific * bitmask. * The Spirit libraries allow the user to do this in two different ways: * * The first enables the IRQs one by one, i.e. using an SPI transaction for * each IRQ to enable. * * Example: * * spirit_irq_disableall(spirit); # this call is used to reset the IRQ mask * registers * spirit_irq_enable(spirit, RX_DATA_READY , S_ENABLE); * spirit_irq_enable(spirit, VALID_SYNC , S_ENABLE); * spirit_irq_enable(spirit, RX_TIMEOUT , S_ENABLE); * * The most applications will require a Spirit IRQ notification on an * microcontroller EXTI line. Then, the user can check which IRQ has been * raised using two different ways. * * On the ISR of the EXTI line phisically linked to the Spirit pin * configured for IRQ: * * Check only one Spirit IRQ (because the Spirit IRQ status register * automatically blanks itself after an SPI reading) into the ISR. * * Example: * * if (spirit_irq_is_pending(RX_DATA_READY)) * { * # do something... * } * * Check more than one Spirit IRQ status by storing the entire IRQ status * registers into a bitfields struct spirit_irqset_s structure and then * check the interesting bits. * * Example: * * spirit_irq_get_pending(&irqStatus); * * if (irqStatus.IRQ_RX_DATA_READY) * { * # do something... * } * * if (irqStatus.IRQ_VALID_SYNC) * { * # do something... * } * * if (irqStatus.RX_TIMEOUT) * { * # do something... * } */ /****************************************************************************** * Included Files ******************************************************************************/ #include "spirit_types.h" #include "spirit_regs.h" /****************************************************************************** * Pre-processor Definitions ******************************************************************************/ /* uint32_t masks */ #define IRQ_TX_FIFO_ALMOST_EMPTY_MASK (0x00010000) /* (1 << 16) */ #define IRQ_RX_FIFO_ALMOST_FULL_MASK (0x00020000) /* (1 << 17) */ #define IRQ_VALID_SYNC_MASK (0x00200000) /* (1 << 21) */ #define IRQ_RX_DATA_READY_MASK (0x01000000) /* (1 << 24) */ #define IRQ_RX_DATA_DISC_MASK (0x02000000) /* (1 << 25) */ #define IRQ_TX_DATA_SENT_MASK (0x04000000) /* (1 << 26) */ #define IRQ_TX_FIFO_ERROR_MASK (0x20000000) /* (1 << 29) */ #define IRQ_RX_FIFO_ERROR_MASK (0x40000000) /* (1 << 30) */ /* Macros used in assertions */ #define IS_SPIRIT_IRQ_LIST(value) \ ((value == RX_DATA_READY) || (value == RX_DATA_DISC) || \ (value == TX_DATA_SENT) || (value == MAX_RE_TX_REACH) || \ (value == CRC_ERROR) || (value == TX_FIFO_ERROR) || \ (value == RX_FIFO_ERROR) || (value == TX_FIFO_ALMOST_FULL) || \ (value == TX_FIFO_ALMOST_EMPTY) || (value == RX_FIFO_ALMOST_FULL) || \ (value == RX_FIFO_ALMOST_EMPTY) || (value == MAX_BO_CCA_REACH) || \ (value == VALID_PREAMBLE) || (value == VALID_SYNC) || \ (value == RSSI_ABOVE_TH) || (value == WKUP_TOUT_LDC) || \ (value == READY) || (value == STANDBY_DELAYED) || \ (value == LOW_BATT_LVL) || (value == POR) || \ (value == BOR) || (value == LOCK) || \ (value == PM_COUNT_EXPIRED) || (value == XO_COUNT_EXPIRED) || \ (value == SYNTH_LOCK_TIMEOUT) || (value == SYNTH_LOCK_STARTUP) || \ (value == SYNTH_CAL_TIMEOUT) || (value == TX_START_TIME) || \ (value == RX_START_TIME) || (value == RX_TIMEOUT) || \ (value == AES_END) || (value == ALL_IRQ )) /****************************************************************************** * Public Types ******************************************************************************/ #ifdef __cplusplus extern "C" { #endif /* IRQ bitfield structure for SPIRIT. This structure is used to read or write * the single IRQ bit. During the initialization the user has to fill this * structure setting to one the single field related to the IRQ he wants to * enable, and to zero the single field related to all the IRQs he wants to * disable. * * The same structure can be used to retrieve all the IRQ events from the IRQ * registers IRQ_STATUS[3:0], and read if one or more specific IRQ raised. * * NOTE: The fields order in the structure depends on used endianness (little * or big endian). The actual definition is valid ONLY for LITTLE ENDIAN * mode. Be sure to change the field order when use a different endianness. */ #ifndef CONFIG_ENDIAN_BIG struct spirit_irqset_s { uint8_t IRQ_SYNTH_LOCK_TIMEOUT : 1; /* IRQ: only for debug; LOCK state * timeout */ uint8_t IRQ_SYNTH_LOCK_STARTUP : 1; /* IRQ: only for debug; see * CALIBR_START_COUNTER */ uint8_t IRQ_SYNTH_CAL_TIMEOUT : 1; /* IRQ: only for debug; SYNTH * calibration timeout */ uint8_t IRQ_TX_START_TIME : 1; /* IRQ: only for debug; TX * circuitry startup time; see * TX_START_COUNTER */ uint8_t IRQ_RX_START_TIME : 1; /* IRQ: only for debug; RX * circuitry startup time; see * TX_START_COUNTER */ uint8_t IRQ_RX_TIMEOUT : 1; /* IRQ: RX operation timeout */ uint8_t IRQ_AES_END : 1; /* IRQ: AES End of operation */ uint8_t reserved : 1; /* Reserved bit */ uint8_t IRQ_READY : 1; /* IRQ: READY state */ uint8_t IRQ_STANDBY_DELAYED : 1; /* IRQ: STANDBY state after * MCU_CK_CONF_CLOCK_TAIL_X * clock cycles */ uint8_t IRQ_LOW_BATT_LVL : 1; /* IRQ: Battery level below * threshold */ uint8_t IRQ_POR : 1; /* IRQ: Power On Reset */ uint8_t IRQ_BOR : 1; /* IRQ: Brown out event (both * accurate and inaccurate) */ uint8_t IRQ_LOCK : 1; /* IRQ: LOCK state */ uint8_t IRQ_PM_COUNT_EXPIRED : 1; /* IRQ: only for debug; * Power Management startup * timer expiration (see reg * PM_START_COUNTER, 0xB5) */ uint8_t IRQ_XO_COUNT_EXPIRED : 1; /* IRQ: only for debug; * Crystal oscillator settling * time counter expired */ uint8_t IRQ_TX_FIFO_ALMOST_EMPTY : 1; /* IRQ: TX FIFO almost empty */ uint8_t IRQ_RX_FIFO_ALMOST_FULL : 1; /* IRQ: RX FIFO almost full */ uint8_t IRQ_RX_FIFO_ALMOST_EMPTY : 1; /* IRQ: RX FIFO almost empty */ uint8_t IRQ_MAX_BO_CCA_REACH : 1; /* IRQ: Max number of back-off * during CCA */ uint8_t IRQ_VALID_PREAMBLE : 1; /* IRQ: Valid preamble detected */ uint8_t IRQ_VALID_SYNC : 1; /* IRQ: Sync word detected */ uint8_t IRQ_RSSI_ABOVE_TH : 1; /* IRQ: RSSI above threshold */ uint8_t IRQ_WKUP_TOUT_LDC : 1; /* IRQ: Wake-up timeout in LDC mode */ uint8_t IRQ_RX_DATA_READY : 1; /* IRQ: RX data ready */ uint8_t IRQ_RX_DATA_DISC : 1; /* IRQ: RX data discarded * (upon filtering) */ uint8_t IRQ_TX_DATA_SENT : 1; /* IRQ: TX data sent */ uint8_t IRQ_MAX_RE_TX_REACH : 1; /* IRQ: Max re-TX reached */ uint8_t IRQ_CRC_ERROR : 1; /* IRQ: CRC error */ uint8_t IRQ_TX_FIFO_ERROR : 1; /* IRQ: TX FIFO underflow/overflow * error */ uint8_t IRQ_RX_FIFO_ERROR : 1; /* IRQ: RX FIFO underflow/overflow * error */ uint8_t IRQ_TX_FIFO_ALMOST_FULL : 1; /* IRQ: TX FIFO almost full */ }; #endif /* IRQ list enumeration for SPIRIT. This enumeration type can be used to * address a specific IRQ. */ enum spirit_irq_e { RX_DATA_READY = 0x00000001, /* IRQ: RX data ready */ RX_DATA_DISC = 0x00000002, /* IRQ: RX data discarded (upon * filtering) */ TX_DATA_SENT = 0x00000004, /* IRQ: TX data sent */ MAX_RE_TX_REACH = 0x00000008, /* IRQ: Max re-TX reached */ CRC_ERROR = 0x00000010, /* IRQ: CRC error */ TX_FIFO_ERROR = 0x00000020, /* IRQ: TX FIFO underflow/overflow * error */ RX_FIFO_ERROR = 0x00000040, /* IRQ: RX FIFO underflow/overflow * error */ TX_FIFO_ALMOST_FULL = 0x00000080, /* IRQ: TX FIFO almost full */ TX_FIFO_ALMOST_EMPTY = 0x00000100, /* IRQ: TX FIFO almost empty */ RX_FIFO_ALMOST_FULL = 0x00000200, /* IRQ: RX FIFO almost full */ RX_FIFO_ALMOST_EMPTY = 0x00000400, /* IRQ: RX FIFO almost empty */ MAX_BO_CCA_REACH = 0x00000800, /* IRQ: Max number of back-off * during CCA */ VALID_PREAMBLE = 0x00001000, /* IRQ: Valid preamble detected */ VALID_SYNC = 0x00002000, /* IRQ: Sync word detected */ RSSI_ABOVE_TH = 0x00004000, /* IRQ: RSSI above threshold */ WKUP_TOUT_LDC = 0x00008000, /* IRQ: Wake-up timeout in LDC mode */ READY = 0x00010000, /* IRQ: READY state */ STANDBY_DELAYED = 0x00020000, /* IRQ: STANDBY state after * MCU_CK_CONF_CLOCK_TAIL_X clock * cycles */ LOW_BATT_LVL = 0x00040000, /* IRQ: Battery level below * threshold */ POR = 0x00080000, /* IRQ: Power On Reset */ BOR = 0x00100000, /* IRQ: Brown out event (both accurate and * inaccurate) */ LOCK = 0x00200000, /* IRQ: LOCK state */ PM_COUNT_EXPIRED = 0x00400000, /* IRQ: only for debug; Power * Management startup timer expiration * (see reg PM_START_COUNTER, 0xB5) */ XO_COUNT_EXPIRED = 0x00800000, /* IRQ: only for debug; Crystal * oscillator settling time counter * expired */ SYNTH_LOCK_TIMEOUT = 0x01000000, /* IRQ: only for debug; LOCK state * timeout */ SYNTH_LOCK_STARTUP = 0x02000000, /* IRQ: only for debug; see * CALIBR_START_COUNTER */ SYNTH_CAL_TIMEOUT = 0x04000000, /* IRQ: only for debug; SYNTH * calibration timeout */ TX_START_TIME = 0x08000000, /* IRQ: only for debug; TX circuitry * startup time; see TX_START_COUNTER */ RX_START_TIME = 0x10000000, /* IRQ: only for debug; RX circuitry * startup time; see TX_START_COUNTER */ RX_TIMEOUT = 0x20000000, /* IRQ: RX operation timeout */ AES_END = 0x40000000, /* IRQ: AES End of operation */ ALL_IRQ = 0x7fffffff /* All the above mentioned IRQs */ }; /****************************************************************************** * Public Function Prototypes ******************************************************************************/ /****************************************************************************** * Name: spirit_irq_disable_all * * Description: * Ssets the IRQ mask registers to 0x00000000, disabling all IRQs. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_irq_disable_all(FAR struct spirit_library_s *spirit); /****************************************************************************** * Name: spirit_irq_set_mask * * Description: * Enables/disables all the IRQs according to the user defined irqset * structure. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * irqset - Pointer to a variable of type struct spirit_irqset_s, through * which the user enable specific IRQs. This parameter is a * pointer to a struct spirit_irqset_s. * * For example suppose to enable only the two IRQ Low Battery Level * and Tx Data Sent: * * struct spirit_irqset_s g_irqset = {0}; * g_irqset.IRQ_LOW_BATT_LVL = 1; * g_irqset.IRQ_TX_DATA_SENT = 1; * spirit_irq_setmask(&g_irqset); * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ #ifndef CONFIG_ENDIAN_BIG int spirit_irq_set_mask(FAR struct spirit_library_s *spirit, FAR struct spirit_irqset_s *irqset); #endif /****************************************************************************** * Name: spirit_irq_enable * * Description: * Enables or disables a specific IRQ. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * irq IRQ to enable or disable. * newstate - new state for the IRQ. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_irq_enable(FAR struct spirit_library_s *spirit, enum spirit_irq_e irq, enum spirit_functional_state_e newstate); /****************************************************************************** * Name: spirit_irt_get_mask * * Description: * Fills a pointer to a structure of struct spirit_irqset_s type with the * content of the IRQ_MASK registers. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * pirqmask - Pointer to a variable of type struct spirit_irqset_s, through * which the user can read which IRQs are enabled. All the * bitfields equals to zero correspond to enabled IRQs, while * all the bitfields equals to one correspond to disabled IRQs. * * For example suppose that the Power On Reset and RX Data * ready are the only enabled IRQs. * * struct spirit_irqset_s g_irqmask; * spirit_irq_get_pending(&g_irqmask); * * Then g_irqmask.IRQ_POR and g_irqmask.IRQ_RX_DATA_READY are * equal to 0 while all the other bitfields are equal to one. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ #ifndef CONFIG_ENDIAN_BIG int spirit_irt_get_mask(FAR struct spirit_library_s *spirit, FAR struct spirit_irqset_s *pirqmask); #endif /****************************************************************************** * Name: spirit_irq_get_pending * * Description: * Fills a pointer to a structure of struct spirit_irqset_s type with the * content of the IRQ_STATUS registers. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * pirqstatus - A pointer to a variable of type struct spirit_irqset_s, * through which the user can receive the status of all the * IRQs. All the bitfields equals to one correspond to the * raised interrupts. * * For example suppose that the XO settling timeout is raised * as well as the Sync word detection. * * struct spirit_irqset_s g_irqstatus; * spirit_irq_get_pending(&g_irqstatus); * * Then g_irqstatus.IRQ_XO_COUNT_EXPIRED and * g_irqstatus.IRQ_VALID_SYNC are equals to 1* while all the * other bitfields are equals to zero. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ #ifndef CONFIG_ENDIAN_BIG int spirit_irq_get_pending(FAR struct spirit_library_s *spirit, FAR struct spirit_irqset_s *pirqstatus); #endif /****************************************************************************** * Name: spirit_irq_clr_pending * * Description: * Clear all IRQ status registers. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_irq_clr_pending(FAR struct spirit_library_s *spirit); /****************************************************************************** * Name: spirit_irq_is_pending * * Description: * Checks if a specific IRQ has been generated. The call resets all the * IRQ status, so it can't be used in case of multiple raising interrupts. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * flag IRQ flag to be checked. * This parameter can be any value of enum spirit_irq_e. * * Returned Value: * true or false. * ******************************************************************************/ bool spirit_irq_is_pending(FAR struct spirit_library_s *spirit, enum spirit_irq_e flag); #ifdef __cplusplus } #endif #endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H */