/**************************************************************************** * wireless/pktradio/pktradio_loopback.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_PKTRADIO_LOOPBACK /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* We need to have the work queue to handle SPI interrupts */ #if !defined(CONFIG_SCHED_WORKQUEUE) # error Worker thread support is required (CONFIG_SCHED_WORKQUEUE) #else # if defined(CONFIG_SCHED_LPWORK) # define LPBKWORK LPWORK # elif defined(CONFIG_SCHED_HPWORK) # define LPBKWORK HPWORK # else # error Neither CONFIG_SCHED_LPWORK nor CONFIG_SCHED_HPWORK defined # endif #endif #ifndef CONFIG_WIRELESS_PKTRADIO # error CONFIG_WIRELESS_PKTRADIO=y is required. #endif #ifndef CONFIG_NET_6LOWPAN # error CONFIG_NET_6LOWPAN=y is required. #endif #if (CONFIG_PKTRADIO_ADDRLEN != 1) && (CONFIG_PKTRADIO_ADDRLEN != 2) && \ (CONFIG_PKTRADIO_ADDRLEN != 8) # error No support for CONFIG_PKTRADIO_ADDRLEN other than {1,2,8} #endif /* Fake value for MAC header length */ #if CONFIG_IOB_BUFSIZE > 40 # define MAC_HDRLEN 4 #else # define MAC_HDRLEN 0 #endif /**************************************************************************** * Private Types ****************************************************************************/ /* The lo_driver_s encapsulates all state information for a single hardware * interface */ struct lo_driver_s { bool lo_bifup; /* true:ifup false:ifdown */ bool lo_pending; /* True: TX poll pending */ uint8_t lo_panid[2]; /* Fake PAN ID for testing */ struct work_s lo_work; /* For deferring poll work to the work queue */ FAR struct iob_s *lo_head; /* Head of IOBs queued for loopback */ FAR struct iob_s *lo_tail; /* Tail of IOBs queued for loopback */ /* This holds the information visible to the NuttX network */ struct radio_driver_s lo_radio; /* Interface understood by the network */ }; /**************************************************************************** * Private Data ****************************************************************************/ static struct lo_driver_s g_loopback; #ifdef CONFIG_NET_6LOWPAN static struct sixlowpan_reassbuf_s g_iobuffer; #endif static uint8_t g_mac_addr[CONFIG_PKTRADIO_ADDRLEN] = { #if CONFIG_PKTRADIO_ADDRLEN == 1 0xab #elif CONFIG_PKTRADIO_ADDRLEN == 2 0xab, 0xcd #elif CONFIG_PKTRADIO_ADDRLEN == 8 0x0c, 0xfa, 0xde, 0x00, 0xde, 0xad, 0xbe, 0xef #endif }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Utility functions */ static void lo_addr2ip(FAR struct net_driver_s *dev); static inline void lo_netmask(FAR struct net_driver_s *dev); /* Polling logic */ static int lo_loopback(FAR struct net_driver_s *dev); static void lo_loopback_work(FAR void *arg); /* NuttX callback functions */ static int lo_ifup(FAR struct net_driver_s *dev); static int lo_ifdown(FAR struct net_driver_s *dev); static void lo_txavail_work(FAR void *arg); static int lo_txavail(FAR struct net_driver_s *dev); #ifdef CONFIG_NET_MCASTGROUP static int lo_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); static int lo_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); #endif #ifdef CONFIG_NETDEV_IOCTL static int lo_ioctl(FAR struct net_driver_s *dev, int cmd, unsigned long arg); #endif static int lo_get_mhrlen(FAR struct radio_driver_s *netdev, FAR const void *meta); static int lo_req_data(FAR struct radio_driver_s *netdev, FAR const void *meta, FAR struct iob_s *framelist); static int lo_properties(FAR struct radio_driver_s *netdev, FAR struct radiodev_properties_s *properties); /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lo_addr2ip * * Description: * Create a MAC-based IP address from the IEEE 802.15.14 short or extended * address assigned to the node. * * 128 112 96 80 64 48 32 16 * ---- ---- ---- ---- ---- ---- ---- ---- * fe80 0000 0000 0000 0000 00ff fe00 xxxx 2-byte * short address IEEE 48-bit MAC * fe80 0000 0000 0000 xxxx xxxx xxxx xxxx 8-byte * extended address IEEE EUI-64 * ****************************************************************************/ static void lo_addr2ip(FAR struct net_driver_s *dev) { /* Set the MAC address as the saddr */ dev->d_mac.radio.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN; memcpy(dev->d_mac.radio.nv_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN); /* Set the IP address */ dev->d_ipv6addr[0] = HTONS(0xfe80); dev->d_ipv6addr[1] = 0; dev->d_ipv6addr[2] = 0; dev->d_ipv6addr[3] = 0; #if CONFIG_PKTRADIO_ADDRLEN == 1 /* Set the IP address based on the 1 byte address */ dev->d_ipv6addr[4] = 0; dev->d_ipv6addr[5] = HTONS(0x00ff); dev->d_ipv6addr[6] = HTONS(0xfe00); dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[0] << 8; #elif CONFIG_PKTRADIO_ADDRLEN == 2 /* Set the IP address based on the 2 byte address */ dev->d_ipv6addr[4] = 0; dev->d_ipv6addr[5] = HTONS(0x00ff); dev->d_ipv6addr[6] = HTONS(0xfe00); dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[0] << 8 | (uint16_t)g_mac_addr[1]; #elif CONFIG_PKTRADIO_ADDRLEN == 8 /* Set the IP address based on the 8-byte address */ dev->d_ipv6addr[4] = (uint16_t)g_mac_addr[0] << 8 | (uint16_t)g_mac_addr[1]; dev->d_ipv6addr[5] = (uint16_t)g_mac_addr[2] << 8 | (uint16_t)g_mac_addr[3]; dev->d_ipv6addr[6] = (uint16_t)g_mac_addr[4] << 8 | (uint16_t)g_mac_addr[5]; dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[6] << 8 | (uint16_t)g_mac_addr[7]; #endif } /**************************************************************************** * Name: lo_netmask * * Description: * Create a netmask of a MAC-based IP address which may be based on either * the IEEE 802.15.14 short or extended address of the MAC. * * 128 112 96 80 64 48 32 16 * ---- ---- ---- ---- ---- ---- ---- ---- * fe80 0000 0000 0000 0000 00ff fe00 xxxx 2-byte * short address IEEE 48-bit MAC * fe80 0000 0000 0000 xxxx xxxx xxxx xxxx 8-byte * extended address IEEE EUI-64 * ****************************************************************************/ static inline void lo_netmask(FAR struct net_driver_s *dev) { dev->d_ipv6netmask[0] = 0xffff; dev->d_ipv6netmask[1] = 0xffff; dev->d_ipv6netmask[2] = 0xffff; dev->d_ipv6netmask[3] = 0xffff; #if CONFIG_PKTRADIO_ADDRLEN == 1 dev->d_ipv6netmask[4] = 0xffff; dev->d_ipv6netmask[5] = 0xffff; dev->d_ipv6netmask[6] = 0xffff; dev->d_ipv6netmask[7] = HTONS(0xff00); #elif CONFIG_PKTRADIO_ADDRLEN == 2 dev->d_ipv6netmask[4] = 0xffff; dev->d_ipv6netmask[5] = 0xffff; dev->d_ipv6netmask[6] = 0xffff; dev->d_ipv6netmask[7] = 0; #elif CONFIG_PKTRADIO_ADDRLEN == 8 dev->d_ipv6netmask[4] = 0; dev->d_ipv6netmask[5] = 0; dev->d_ipv6netmask[6] = 0; dev->d_ipv6netmask[7] = 0; #endif } /**************************************************************************** * Name: lo_loopback * * Description: * Check if the network has any outgoing packets ready to send. This is * a callback from devif_poll(). devif_poll() will be called only during * normal TX polling. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * the network is locked. * ****************************************************************************/ static int lo_loopback(FAR struct net_driver_s *dev) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private; struct pktradio_metadata_s pktmeta; FAR struct iob_s *iob; int ret; /* Create some fake metadata */ memset(&pktmeta, 0, sizeof(struct pktradio_metadata_s)); pktmeta.pm_src.pa_addrlen = CONFIG_PKTRADIO_ADDRLEN; pktmeta.pm_dest.pa_addrlen = CONFIG_PKTRADIO_ADDRLEN; /* On loopback the local address is both the source and destination. */ memcpy(pktmeta.pm_src.pa_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN); memcpy(pktmeta.pm_dest.pa_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN); /* Loop while there framelist to be sent, i.e., while the freme list is not * empty. Sending, of course, just means relaying back through the network * for this driver. */ while (priv->lo_head != NULL) { ninfo("Looping frame IOB %p\n", iob); /* Increment statistics */ NETDEV_RXPACKETS(&priv->lo_radio.r_dev); /* Remove the IOB from the queue */ iob = priv->lo_head; priv->lo_head = iob->io_flink; iob->io_flink = NULL; /* Did the framelist become empty? */ if (priv->lo_head == NULL) { priv->lo_tail = NULL; } /* Make sure the our single packet buffer is attached */ priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf; /* Return the next frame to the network */ ninfo("Send frame %p to the network: Offset=%u Length=%u\n", iob, iob->io_offset, iob->io_len); ret = sixlowpan_input(&priv->lo_radio, iob, (FAR void *)&pktmeta); /* Increment statistics */ NETDEV_TXPACKETS(&priv->lo_radio.r_dev); if (ret < 0) { nerr("ERROR: sixlowpan_input returned %d\n", ret); NETDEV_TXERRORS(&priv->lo_radio.r_dev); NETDEV_ERRORS(&priv->lo_radio.r_dev); } } return 0; } /**************************************************************************** * Name: lo_loopback_work * * Description: * Perform loopback of received framelist. * * Input Parameters: * arg - The argument passed when work_queue() as called. * * Returned Value: * OK on success * * Assumptions: * The network is locked * ****************************************************************************/ static void lo_loopback_work(FAR void *arg) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg; /* Perform the loopback */ net_lock(); lo_loopback(&priv->lo_radio.r_dev); net_unlock(); } /**************************************************************************** * Name: lo_ifup * * Description: * NuttX Callback: Bring up the Ethernet interface when an IP address is * provided * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int lo_ifup(FAR struct net_driver_s *dev) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private; ninfo("Bringing up: IPv6 %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2], dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5], dev->d_ipv6addr[6], dev->d_ipv6addr[7]); #if CONFIG_PKTRADIO_ADDRLEN == 1 ninfo("Node: %02x\n", dev->d_mac.radio.nv_addr[0]); #elif CONFIG_PKTRADIO_ADDRLEN == 2 ninfo("Node: %02x:%02x\n", dev->d_mac.radio.nv_addr[0], dev->d_mac.radio.nv_addr[1]); #elif CONFIG_PKTRADIO_ADDRLEN == 8 ninfo("Node: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x PANID=%02x:%02x\n", dev->d_mac.radio.nv_addr[0], dev->d_mac.radio.nv_addr[1], dev->d_mac.radio.nv_addr[2], dev->d_mac.radio.nv_addr[3], dev->d_mac.radio.nv_addr[4], dev->d_mac.radio.nv_addr[5], dev->d_mac.radio.nv_addr[6], dev->d_mac.radio.nv_addr[7]); #endif priv->lo_bifup = true; return OK; } /**************************************************************************** * Name: lo_ifdown * * Description: * NuttX Callback: Stop the interface. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int lo_ifdown(FAR struct net_driver_s *dev) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private; ninfo("IP up: %u\n", priv->lo_bifup); /* Mark the device "down" */ priv->lo_bifup = false; return OK; } /**************************************************************************** * Name: lo_txavail_work * * Description: * Perform an out-of-cycle poll on the worker thread. * * Input Parameters: * arg - Reference to the NuttX driver state structure (cast to void*) * * Returned Value: * None * * Assumptions: * Called on the higher priority worker thread. * ****************************************************************************/ static void lo_txavail_work(FAR void *arg) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg; ninfo("TX available work. IP up: %u\n", priv->lo_bifup); /* Ignore the notification if the interface is not yet up */ net_lock(); if (priv->lo_bifup) { /* If so, then poll the network for new XMIT data */ #ifdef CONFIG_NET_6LOWPAN /* Make sure the our single packet buffer is attached */ priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf; #endif /* Then perform the poll */ devif_poll(&priv->lo_radio.r_dev, lo_loopback); } net_unlock(); } /**************************************************************************** * Name: lo_txavail * * Description: * Driver callback invoked when new TX data is available. This is a * stimulus perform an out-of-cycle poll and, thereby, reduce the TX * latency. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * Called in normal user mode * ****************************************************************************/ static int lo_txavail(FAR struct net_driver_s *dev) { FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private; ninfo("Available: %u\n", work_available(&priv->lo_work)); /* Is our single work structure available? It may not be if there are * pending actions and we will have to ignore the Tx availability * action. */ if (!work_available(&priv->lo_work) || priv->lo_head != NULL) { nwarn("WARNING: lo_work NOT available\n"); priv->lo_pending = true; } else { /* Schedule to perform the interrupt processing on the worker thread. */ priv->lo_pending = false; work_queue(LPBKWORK, &priv->lo_work, lo_txavail_work, priv, 0); } return OK; } /**************************************************************************** * Name: lo_addmac * * Description: * NuttX Callback: Add the specified MAC address to the hardware multicast * address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be added * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_MCASTGROUP static int lo_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { #if CONFIG_PKTRADIO_ADDRLEN == 1 ninfo("MAC: %02x\n", mac[0]); #elif CONFIG_PKTRADIO_ADDRLEN == 2 ninfo("MAC: %02x:%02x\n", mac[0], mac[1]); #elif CONFIG_PKTRADIO_ADDRLEN == 8 ninfo("MAC: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], mac[6], mac[7]); #endif /* There is no multicast support in the loopback driver */ return OK; } #endif /**************************************************************************** * Name: lo_rmmac * * Description: * NuttX Callback: * Remove the specified MAC address from the hardware multicast * address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be removed * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_MCASTGROUP static int lo_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { #if CONFIG_PKTRADIO_ADDRLEN == 1 ninfo("MAC: %02x\n", mac[0]); #elif CONFIG_PKTRADIO_ADDRLEN == 2 ninfo("MAC: %02x:%02x\n", mac[0], mac[1]); #elif CONFIG_PKTRADIO_ADDRLEN == 8 ninfo("MAC: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], mac[6], mac[7]); #endif /* There is no multicast support in the loopback driver */ return OK; } #endif /**************************************************************************** * Name: macnet_ioctl * * Description: * Handle network IOCTL commands directed to this device. * * Input Parameters: * dev - Reference to the NuttX driver state structure * cmd - The IOCTL command * arg - The argument for the IOCTL command * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NETDEV_IOCTL static int lo_ioctl(FAR struct net_driver_s *dev, int cmd, unsigned long arg) { FAR struct pktradio_ifreq_s *cmddata; FAR struct lo_driver_s *priv; int ret = -ENOTTY; DEBUGASSERT(dev != NULL && dev->d_private != NULL && arg != 0ul); priv = (FAR struct lo_driver_s *)dev->d_private; cmddata = (FAR struct pktradio_ifreq_s *)((uintptr_t)arg); switch (cmd) { /* SIOCPKTRADIOGGPROPS * Description: Get the radio properties * Input: Pointer to read-write instance of struct * pktradio_ifreq_s * Output: Properties returned in struct pktradio_ifreq_s * instance */ case SIOCPKTRADIOGGPROPS: { FAR struct radio_driver_s *radio = (FAR struct radio_driver_s *)dev; FAR struct radiodev_properties_s *props = (FAR struct radiodev_properties_s *)&cmddata->pifr_props; ret = lo_properties(radio, props); } break; /* SIOCPKTRADIOSNODE * Description: Set the radio node address * Input: Pointer to read-only instance of struct * pktradio_ifreq_s * Output: None */ case SIOCPKTRADIOSNODE: { FAR const struct pktradio_addr_s *newaddr = (FAR const struct pktradio_addr_s *)&cmddata->pifr_hwaddr; if (newaddr->pa_addrlen != 1) { ret = -EINVAL; } else { FAR struct netdev_varaddr_s *devaddr = &dev->d_mac.radio; devaddr->nv_addrlen = 1; devaddr->nv_addr[0] = newaddr->pa_addr[0]; #if CONFIG_PKTRADIO_ADDRLEN > 1 memset(&devaddr->pa_addr[1], 0, CONFIG_PKTRADIO_ADDRLEN - 1); #endif ret = OK; } } break; /* SIOCPKTRADIOGNODE * Description: Get the radio node address * Input: Pointer to read-write instance of * struct pktradio_ifreq_s * Output: Node address return in struct pktradio_ifreq_s * instance */ case SIOCPKTRADIOGNODE: { FAR struct pktradio_addr_s *retaddr = (FAR struct pktradio_addr_s *)&cmddata->pifr_hwaddr; FAR const struct netdev_varaddr_s *devaddr = &dev->d_mac.radio; retaddr->pa_addrlen = devaddr->nv_addrlen; retaddr->pa_addr[0] = devaddr->nv_addr[0]; #if CONFIG_PKTRADIO_ADDRLEN > 1 memset(&addr->pa_addr[1], 0, CONFIG_PKTRADIO_ADDRLEN - 1); #endif ret = OK; } break; default: wlwarn("WARNING: Unrecognized IOCTL command: %02x\n", cmd); break; } UNUSED(priv); return ret; } #endif /**************************************************************************** * Name: lo_get_mhrlen * * Description: * Calculate the MAC header length given the frame meta-data. * * Input Parameters: * netdev - The networkd device that will mediate the MAC interface * meta - Obfuscated metadata structure needed to create the radio * MAC header * * Returned Value: * A non-negative MAC headeer length is returned on success; a negated * errno value is returned on any failure. * ****************************************************************************/ static int lo_get_mhrlen(FAR struct radio_driver_s *netdev, FAR const void *meta) { return MAC_HDRLEN; } /**************************************************************************** * Name: lo_req_data * * Description: * Requests the transfer of a list of frames to the MAC. * * Input Parameters: * netdev - The networkd device that will mediate the MAC interface * meta - Obfuscated metadata structure needed to create the radio * MAC header * framelist - Head of a list of frames to be transferred. * * Returned Value: * Zero (OK) returned on success; a negated errno value is returned on * any failure. * ****************************************************************************/ static int lo_req_data(FAR struct radio_driver_s *netdev, FAR const void *meta, FAR struct iob_s *framelist) { FAR struct lo_driver_s *priv; FAR struct iob_s *iob; DEBUGASSERT(netdev != NULL && netdev->r_dev.d_private != NULL); priv = (FAR struct lo_driver_s *)netdev->r_dev.d_private; DEBUGASSERT(meta != NULL && framelist != NULL); /* Add the incoming list of framelist to queue of framelist to loopback */ for (iob = framelist; iob != NULL; iob = framelist) { /* Increment statistics */ NETDEV_RXPACKETS(&priv->lo_radio.r_dev); /* Remove the IOB from the queue */ framelist = iob->io_flink; iob->io_flink = NULL; ninfo("Queuing frame IOB %p\n", iob); /* Just zero the MAC header for test purposes */ DEBUGASSERT(iob->io_offset == MAC_HDRLEN); memset(iob->io_data, 0, MAC_HDRLEN); /* Add the IOB to the tail of the queue of framelist to be looped * back */ if (priv->lo_tail == NULL) { priv->lo_head = iob; } else { priv->lo_tail->io_flink = iob; } priv->lo_tail = iob; } /* Schedule to serialize the poll on the worker thread. */ work_queue(LPBKWORK, &priv->lo_work, lo_loopback_work, priv, 0); return OK; } /**************************************************************************** * Name: lo_properties * * Description: * Different packet radios may have different properties. If there are * multiple packet radios, then those properties have to be queried at * run time. This information is provided to the 6LoWPAN network via the * following structure. * * Input Parameters: * netdev - The network device to be queried * properties - Location where radio properties will be returned. * * Returned Value: * Zero (OK) returned on success; a negated errno value is returned on * any failure. * ****************************************************************************/ static int lo_properties(FAR struct radio_driver_s *netdev, FAR struct radiodev_properties_s *properties) { DEBUGASSERT(netdev != NULL && properties != NULL); memset(properties, 0, sizeof(struct radiodev_properties_s)); /* General */ properties->sp_addrlen = CONFIG_PKTRADIO_ADDRLEN; /* Length of an address */ properties->sp_framelen = CONFIG_IOB_BUFSIZE; /* Fixed frame length */ /* Multicast address */ properties->sp_mcast.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN; memset(properties->sp_mcast.nv_addr, 0xee, RADIO_MAX_ADDRLEN); /* Broadcast address */ properties->sp_bcast.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN; memset(properties->sp_mcast.nv_addr, 0xff, RADIO_MAX_ADDRLEN); #ifdef CONFIG_NET_STARPOINT /* Star hub node address */ properties->sp_hubnode.nv_addrlen = 1; properties->sp_hubnode.nv_addr[0] = CONFIG_SPIRIT_HUBNODE; #endif return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: pktradio_loopback * * Description: * Initialize and register the Ieee802.15.4 MAC loopback network driver. * * Input Parameters: * None * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * ****************************************************************************/ int pktradio_loopback(void) { FAR struct lo_driver_s *priv; FAR struct radio_driver_s *radio; FAR struct net_driver_s *dev; ninfo("Initializing\n"); /* Get the interface structure associated with this interface number. */ priv = &g_loopback; /* Initialize the driver structure */ memset(priv, 0, sizeof(struct lo_driver_s)); radio = &priv->lo_radio; dev = &radio->r_dev; dev->d_ifup = lo_ifup; /* I/F up (new IP address) callback */ dev->d_ifdown = lo_ifdown; /* I/F down callback */ dev->d_txavail = lo_txavail; /* New TX data callback */ #ifdef CONFIG_NET_MCASTGROUP dev->d_addmac = lo_addmac; /* Add multicast MAC address */ dev->d_rmmac = lo_rmmac; /* Remove multicast MAC address */ #endif #ifdef CONFIG_NETDEV_IOCTL dev->d_ioctl = lo_ioctl; /* Handle network IOCTL commands */ #endif dev->d_private = priv; /* Used to recover private state from dev */ /* Set the network mask and advertise our MAC-based IP address */ lo_netmask(dev); lo_addr2ip(dev); /* Initialize the Network frame-related callbacks */ radio->r_get_mhrlen = lo_get_mhrlen; /* Get MAC header length */ radio->r_req_data = lo_req_data; /* Enqueue frame for transmission */ radio->r_properties = lo_properties; /* Returns radio properties */ #ifdef CONFIG_NET_6LOWPAN /* Make sure the our single packet buffer is attached. * We must do this before registering the device since, * once the device is registered, a packet may * be attempted to be forwarded and require the buffer. */ priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf; #endif /* Register the loopabck device with the OS so that socket IOCTLs can * be performed. */ netdev_register(&priv->lo_radio.r_dev, NET_LL_PKTRADIO); /* Put the network in the UP state */ dev->d_flags = IFF_UP; return lo_ifup(&priv->lo_radio.r_dev); } #endif /* CONFIG_PKTRADIO_LOOPBACK */