#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_FPU is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDPARMS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm32l4r9ai-disco"
CONFIG_ARCH_BOARD_STM32L4R9AI_DISCO=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="stm32l4"
CONFIG_ARCH_CHIP_STM32L4=y
CONFIG_ARCH_CHIP_STM32L4R9AI=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARM_MPU=y
CONFIG_BOARDCTL_IOCTL=y
CONFIG_BOARDCTL_UNIQUEID=y
CONFIG_BOARDCTL_UNIQUEID_SIZE=12
CONFIG_BOARD_LOOPSPERMSEC=9234
CONFIG_BUILD_PROTECTED=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEV_LOOP=y
CONFIG_DEV_ZERO=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_TMPFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_DRIVER=y
CONFIG_INTELHEX_BINARY=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_MM_REGIONS=3
CONFIG_MTD=y
CONFIG_MTD_PARTITION=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_DISABLE_DD=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_MKRD=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_NUTTX_USERSPACE=0x08020000
CONFIG_PASS1_BUILDIR="boards/arm/stm32l4/stm32l4r9ai-disco/kernel"
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=8
CONFIG_RAM_SIZE=98304
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_RTC_ALARM=y
CONFIG_RTC_DATETIME=y
CONFIG_RTC_DRIVER=y
CONFIG_RTC_IOCTL=y
CONFIG_RTC_NALARMS=2
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SPI_DRIVER=y
CONFIG_STM32L4_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
CONFIG_STM32L4_I2C1=y
CONFIG_STM32L4_I2C3=y
CONFIG_STM32L4_PWR=y
CONFIG_STM32L4_RNG=y
CONFIG_STM32L4_RTC=y
CONFIG_STM32L4_SAI1PLL=y
CONFIG_STM32L4_SPI2=y
CONFIG_STM32L4_SRAM2_HEAP=y
CONFIG_STM32L4_UART4=y
CONFIG_STM32L4_USART2=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
CONFIG_SYS_RESERVED=8
CONFIG_TASK_NAME_SIZE=0
CONFIG_UART4_BAUD=2000000
CONFIG_UART4_RXBUFSIZE=512
CONFIG_UART4_SERIAL_CONSOLE=y
CONFIG_USERMAIN_STACKSIZE=3072
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WDOG_INTRESERVE=1